Loading files
include <BOSL2/std.scad>
include <BOSL2/rounding.scad>
/*Created by Hands on Katie and BlackjackDuck (Andy)
Credit to
Katie (and her community) at Hands on Katie on Youtube and Patreon
@David D on Printables for Multiconnect
Jonathan at Keep Making for MulticonnMultiboard
Licensed Creative Commons 4.0 Attribution Non-Commercial Share-Alike (CC-BY-NC-SA)
*/
/*[Mounting Options]*/
//Mounting_Style = "Multiconnect"; //[Multiconnect, Threaded Snap] //not yet implemented
Mounting_Surface = "Multiboard"; //[Multiboard, openGrid]
Slot_Count = 2;
/*[Hook Parameters]*/
Number_of_Grooves = 6; //[2:2:20]
//Depth (mm) of the inside of each groove
Groove_Depth = 10;
//Width (mm) of the inside of each groove
Groove_Width = 10;
//Length (mm) of the center post. Deeper grooves may require a longer center post.
Center_Post_Length = 20;
/*[Advanced Options]*/
//Depth (mm) of the entire hook. 25mm minimum recommended for the multiconnect.
Hook_Depth = 25;
//Thickness (mm) of the center post.
Center_Post_Thickness = 4;
//Thickness (mm) of the base of the hook.
Base_Thickness = 4;
//Thickness (mm) of the individual posts between the grooves.
Individual_Post_Thickness = 4;
//Chamfer (mm) of the edges of the hook.
Chamfer = 1; //0.1
/*[Advanced - Tile Parameters]*/
//Customize tile sizes - openGrid standard is 28mm
Tile_Size = 28;
//Thickness of the tile (full only)
Tile_Thickness = 6.8;
/*[Advanced - Slot Customization]*/
//Offset the multiconnect on-ramps to be between grid slots rather than on the slot
onRampHalfOffset = true;
//Change slot orientation, when enabled slots to come from the top of the back, when disabled slots come from the bottom
Slot_From_Top = true;
//Distance between Multiconnect slots on the back (25mm is standard for MultiBoard)
Custom_Distance_Between_Slots = 25;
//QuickRelease removes the small indent in the top of the slots that lock the part into place
slotQuickRelease = false;
//Dimple scale tweaks the size of the dimple in the slot for printers that need a larger dimple to print correctly
dimpleScale = 1; //[0.5:.05:1.5]
//Scale the size of slots in the back (1.015 scale is default for a tight fit. Increase if your finding poor fit. )
slotTolerance = 1.00; //[0.925:0.005:1.075]
//Move the slot (Y axis) inwards (positive) or outwards (negative)
slotDepthMicroadjustment = 0; //[-.5:0.05:.5]
//Enable a slot on-ramp for easy mounting of tall items
onRampEnabled = false;
//Frequency of slots for on-ramp. 1 = every slot; 2 = every 2 slots; etc.
On_Ramp_Every_X_Slots = 1;
//Distance from the back of the item holder to where the multiconnect stops (i.e., where the dimple is) (by mm)
Multiconnect_Stop_Distance_From_Back = 13;
Force_Back_Thickness = 0; //0.1
/*[Hidden]*/
debug_3d = true;
Backer_Negatives_Only = false; //If true, the backer will be negative space. If false, the backer will be positive space.
//Set to 0 to use the default thickness of the back. Set to a number to force the back to be that thickness.
distanceBetweenSlots =
Mounting_Surface == "Multiboard" ? 25 :
Mounting_Surface == "openGrid" ? 28 :
Custom_Distance_Between_Slots;
onRampEveryXSlots =
onRampHalfOffset ? On_Ramp_Every_X_Slots :
On_Ramp_Every_X_Slots == 1 ? 2 : On_Ramp_Every_X_Slots;
/*[Standard Parameters]*/
//Profile
//Select_Profile = "Standard"; //[Standard, Jr., Mini, Multipoint Beta, Custom]
//Select_Part_Type = "Connector Round"; //[Connector Round, Connector Rail, Connector Double sided Round, Connector Double-Sided Rail, Connector Rail Delete Tool, Receiver Open-Ended, Receiver Passthrough, Backer Open-Ended, Backer Passthrough]
//Generate one of each type of part
//Length of rail (in mm) (excluding rounded ends)
//Length = 25;
/* [Hidden] */
///*[Style Customizations]*/
//Edge rounding (by mm)
edgeRounding = 0.5; // [0:0.1:2]
///*[Rail Customization]*/
//Rounding of rail ends
Rounding = "Both Sides";//[None, One Side, Both Sides]
///*[Receiver Customization]*/
Receiver_Side_Wall_Thickness = 2.5;
Receiver_Back_Thickness = 2;
Receiver_Top_Wall_Thickness = 2.5;
OnRamps = "Enabled"; //[Enabled, Disabled]
OnRamp_Every_n_Holes = 2;
OnRamp_Start_Offset = 1;
///*[Backer Customization]*/
Width = 50;
///*[AdvancedParameters]*/
//Distance (in mm) between each grid (25 for Multiboard)
Grid_Size = 25;
///*[Custom MC Builder]*/
//Radius of connector
Radius = 10; //.1
//Depth of inside capture
Depth1 = 1; //.1
//Lateral depth of angle dovetail
Depth2 = 2.5; //.1
//Depth of stem
Depth3 = 0.5; //.1
//Offset/Tolerance of receiver part
Offset = 0.15; //.01
//Radius (in mm) of dimple
DimpleSize = 1; //.1
//unadjusted cordinates, dimple size, default offset
customSpecs = [Radius, Depth1, Depth2, Depth3, Offset, DimpleSize];
standardSpecs = [10, 1, 2.5, 0.5, 0.15, 1];
jrSpecs = [5, 0.6, 1.2, 0.4, 0.16, 0.8];
miniSpecs = [3.2, 1, 1.2, 0.4, 0.16, 0.8];
multipointBeta = [7.9, 0.4, 2.2, 0.4, 0.15, 0.8];
debug = false;
onRampEveryNHoles = OnRamp_Every_n_Holes * distanceBetweenSlots;
onRampOffset = OnRamp_Start_Offset * distanceBetweenSlots;
/*
START PARTS
*/
//3D Version
if(debug_3d)
test_shape();
module test_shape() {
attachable(size=[Center_Post_Thickness + Groove_Width*Number_of_Grooves+Individual_Post_Thickness*Number_of_Grooves,Hook_Depth,Base_Thickness+Center_Post_Length]){
down(Center_Post_Length/2)
union()
//base`
cuboid([Center_Post_Thickness + Groove_Width*Number_of_Grooves+Individual_Post_Thickness*Number_of_Grooves,Hook_Depth,Base_Thickness], chamfer=Chamfer, edges=[BOT,TOP, LEFT, RIGHT]){
//center post
attach(TOP, BOT, overlap=Chamfer) cuboid([Center_Post_Thickness,Hook_Depth,Center_Post_Length+Chamfer])
attach(TOP, BACK)
multiconnectBack(distanceBetweenSlots*Slot_Count, Hook_Depth, distanceBetweenSlots, slotStopFromBack = 13);
attach(TOP, BOT, overlap=Chamfer) xflip_copy()
xcopies(sp=[Center_Post_Thickness/2+Groove_Width+Individual_Post_Thickness/2,0,0], n = Number_of_Grooves/2, spacing = Groove_Width+Individual_Post_Thickness)
//individual post
cuboid([Individual_Post_Thickness, Hook_Depth,Groove_Depth+Chamfer], chamfer=Chamfer, except_edges= $idx == 1 ? [BOT] : [BOT]);
}
children();
}
}
if(!debug_3d)
// 2D ATTEMPT
union()
rect([89,10], rounding=[0,0,5,5], $fn=15){
//center post
attach(TOP, BOT) rect([5,20]);
//individual posts
xflip_copy()attach(TOP, BOT)
xcopies(sp=[14.5,0], n = 3, spacing = 14)
//individual post
rect([4, 10], rounding=[1.5,1.5,0,0], $fn=15);
}
//offset_sweep(object_profile, height=20);
//!linear_extrude(height = 20) object_profile();
//bottom rail
module hook_profile() {
linear_extrude(height = Hook_Depth)
rect([Center_Post_Thickness + Groove_Width*Number_of_Grooves+Individual_Post_Thickness*Number_of_Grooves,Base_Thickness], rounding=[0,0,Base_Thickness,Base_Thickness], $fn=15){
//center post
attach(TOP, BOT) rect([Center_Post_Thickness,Center_Post_Length]);
//individual posts
xflip_copy()attach(TOP, BOT)
xcopies(sp=[Center_Post_Thickness/2+Groove_Width+Individual_Post_Thickness/2,0], n = Number_of_Grooves/2, spacing = Groove_Width+Individual_Post_Thickness)
//individual post
rect([Individual_Post_Thickness, Groove_Depth], rounding=[1.5,1.5,0,0], $fn=15);
}
}
/*
union()
rect([Center_Post_Thickness + Groove_Width*Number_of_Grooves+Individual_Post_Thickness*Number_of_Grooves,Base_Thickness], rounding=[0,0,Base_Thickness,Base_Thickness], $fn=15){
//center post
attach(TOP, BOT) rect([Center_Post_Thickness,Center_Post_Length]);
//individual posts
xflip_copy()attach(TOP, BOT)
xcopies(sp=[Center_Post_Thickness/2+Groove_Width+Individual_Post_Thickness/2,0], n = Number_of_Grooves/2, spacing = Groove_Width+Individual_Post_Thickness)
//individual post
rect([Individual_Post_Thickness, Groove_Depth], rounding=[1.5,1.5,0,0], $fn=15);
}
;
/*
BEGIN Multiconnect Modules and Functions
*/
//Threaded back
module threadedSnapBack(backWidth, backHeight, distanceBetweenSlots, anchor=BOT, orient=UP, spin=0){
diff()
tag(Backer_Negatives_Only ? "remove" : "")
cuboid(size = [backWidth, Force_Back_Thickness == 0 ? 3.59 : Force_Back_Thickness, backHeight], rounding=edgeRounding, except_edges=BACK, anchor=anchor, orient=orient, spin=spin){
tag(Backer_Negatives_Only ? "keep" : "remove")
attach(FRONT, BOT, inside=true, shiftout=0.01)
grid_copies(size = [backWidth - Outer_Diameter_Sm*2, backHeight - Outer_Diameter_Sm*2], spacing = distanceBetweenSlots)
trapezoidal_threaded_rod(d=Outer_Diameter_Sm, l=3.6, pitch=Pitch_Sm, flank_angle = Flank_Angle_Sm, thread_depth = Thread_Depth_Sm, $fn=50, internal=true, bevel2 = true, blunt_start=false, teardrop=true, anchor=TOP, $slop=Slop);
children();
};
}
//Slotted back Module
module multiconnectBack(backWidth, backHeight, distanceBetweenSlots, slotStopFromBack = 13, anchor = BOT, spin = 0, orient = UP)
{
//slot count calculates how many slots can fit on the back. Based on internal width for buffer.
//slot width needs to be at least the distance between slot for at least 1 slot to generate
let (backWidth = max(backWidth,distanceBetweenSlots), backHeight = max(backHeight, 25),slotCount = floor(backWidth/distanceBetweenSlots), backThickness = Force_Back_Thickness == 0 ? 6.5 : Force_Back_Thickness){
attachable(anchor, spin, orient, size = [backWidth, backThickness, backHeight]) {
translate([-backWidth/2, backThickness/2, -backHeight/2])
diff() {
tag(Backer_Negatives_Only ? "remove" : "")
translate(v = [0,-backThickness,0])
cuboid(size = [backWidth,backThickness,backHeight], rounding=edgeRounding, except_edges=BACK, anchor=FRONT+LEFT+BOT);
//Loop through slots and center on the item
//Note: I kept doing math until it looked right. It's possible this can be simplified.
for (slotNum = [0:1:slotCount-1]) {
force_tag(Backer_Negatives_Only ? "keep" : "remove")
translate(v = [distanceBetweenSlots/2+(backWidth/distanceBetweenSlots-slotCount)*distanceBetweenSlots/2+slotNum*distanceBetweenSlots,-2.35+slotDepthMicroadjustment + (Force_Back_Thickness == 0 ? 0 : 6.5 - Force_Back_Thickness),backHeight-slotStopFromBack]){
if(Backer_Negatives_Only)
back_half(y=-4.15, s=backHeight * 2 + 20)
slotTool(backHeight);
else
slotTool(backHeight);
}
}
}
children();
}
}
//Create Slot Tool
module slotTool(totalDepth) {
//In slotTool, added a new variable distanceOffset which is set by the option:
distanceOffset = onRampHalfOffset ? distanceBetweenSlots / 2 : 0;
scale(v = slotTolerance)
//slot minus optional dimple with optional on-ramp
let (slotProfile = [[0,0],[10.15,0],[10.15,1.2121],[7.65,3.712],[7.65,5],[0,5]])
difference() {
union() {
//round top
rotate(a = [90,0,0,])
rotate_extrude($fn=50)
polygon(points = slotProfile);
//long slot
translate(v = [0,0,0])
rotate(a = [180,0,0])
linear_extrude(height = totalDepth+1)
union(){
polygon(points = slotProfile);
mirror([1,0,0])
polygon(points = slotProfile);
}
//on-ramp
if(onRampEnabled)
for(y = [1:onRampEveryXSlots:totalDepth/distanceBetweenSlots])
//then modify the translate within the on-ramp code to include the offset
translate(v = [0,-5,(-y*distanceBetweenSlots)+distanceOffset])
rotate(a = [-90,0,0])
cylinder(h = 5, r1 = 12, r2 = 10.15);
}
//dimple
if (slotQuickRelease == false)
scale(v = dimpleScale)
rotate(a = [90,0,0,])
rotate_extrude($fn=50)
polygon(points = [[0,0],[0,1.5],[1.5,0]]);
}
}
}
//calculate the max x and y points. Useful in calculating size of an object when the path are all positive variables originating from [0,0]
function maxX(path) = max([for (p = path) p[0]]);
function maxY(path) = max([for (p = path) p[1]]);
//this function takes the measurements of a multiconnect-style dovetail and converts them to profile coordinates.
//When generating the male connector, set offsetMM to zero. Otherwise standard is 0.15 offset for delete tool
function dimensionsToCoords(radius, depth1, depth2, depth3, offsetMM) = [
[0,0],
[radius+offsetMM, 0],
[radius+offsetMM,offsetMM == 0 ? depth1 : depth1+sin(45)*offsetMM*2],
[radius-depth2+offsetMM, offsetMM == 0 ? depth2+depth1 : depth2+depth1+sin(45)*offsetMM*2],
[radius-depth2+offsetMM, depth2+depth1+depth3+offsetMM],
[0,depth2+depth1+depth3+offsetMM]
];
//
//END Multiconnect Modules and Functions
//b8959f8e5This file is pinned to the selected release. Download the original to open it in your design tool.