QNICE-FPGA

\ifx\pdfminorversion\undefined
 \pdfoptionpdfminorversion=3
\else
 \pdfminorversion=3
\fi
\input texinfo

@setfilename index.texi
@settitle vbcc manual
@setchapternewpage odd

@ifinfo

This is the manual for the vbcc compiler system.

Copyright 1995-2019 Volker Barthelmann

@end ifinfo

@titlepage
@title vbcc compiler system
@author Volker Barthelmann

@page

@end titlepage

@paragraphindent 0

@contents

@chapter General

@section Introduction

    vbcc is a highly optimizing portable and retargetable ISO C compiler.
    It supports ISO C according to ISO/IEC 9899:1989 and a subset of the
    new standard ISO/IEC 9899:1999 (C99).

    It is split into a target-independent and a target-dependent part, and
    provides complete abstraction of host- and target-arithmetic. Therefore,
    it fully supports cross-compiling for 8, 16, 32 and 64bit architectures.

    Embedded systems are supported by features like different pointer-sizes
    (e.g. differently sized function- and object-pointers or near- and
    far-pointers), ROM-able code, inline-assembly, bit-types,
    interrupt-handlers, section-attributes, stack-calculation and many
    others (depending on the backend).

    vbcc provides a large set of aggressive high-level optimizations
    (@pxref{Optimizations})
    as well as target-specific optimizations to produce faster or smaller
    code. Rather than restricting analysis and optimization to single
    functions or files, vbcc is able to optimize across functions and
    even modules. Target-independent optimizations include:

@itemize @minus
    @item cross-module function-inlining
    @item partial inlining of recursive functions
    @item inter-procedural data-flow analysis
    @item inter-procedural register-allocation
    @item register-allocation for global variables
    @item global common-subexpression-elimination
    @item global constant-propagation
    @item global copy-propagation
    @item dead-code-elimination
    @item alias-analysis
    @item loop-unrolling
    @item induction-variable elimination
    @item loop-invariant code-motion
    @item loop-reversal
@end itemize


@section Legal

    vbcc is copyright in 1995-2019 by Volker Barthelmann.

    This archive may be redistributed without modifications and used
    for non-commercial purposes.

    An exception for commercial usage is granted, provided that the target
    CPU is M68k and the target OS is AmigaOS. Resulting binaries may be
    distributed commercially without further licensing.

    In all other cases you need my written consent.

    This copyright applies to vc, vbcc, vsc and vcpr.

    This archive may contain other tools (e.g. assemblers or linkers)
    which do not fall under this license. Please consult the corresponding
    documentation of these tools.

    vbcc contains the preprocessor ucpp by Thomas Pornin. Included is the
    copyright notice of ucpp (note that this license does not apply to vbcc
    or any other part of this distribution):

@example
/*
 * (c) Thomas Pornin 1999, 2000
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 4. The name of the authors may not be used to endorse or promote
 *    products derived from this software without specific prior written
 *    permission.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
@end example


@section Installation

The vbcc directory tree looks as follows:

@table @file

@item vbcc/bin
                The executables.

@item vbcc/config
                Config files for the frontend.

@item vbcc/targets/<target>
                Subdirectory containing all files specific to a certain
                target (e.g. m68k-amigaos or ppc-eabi).
@end table

@subsection Installing for Unix

    @enumerate

    @item Extract the archive.

    @item Set the environment variable @env{VBCC} to the vbcc directory.
        Depending on your shell this might be done e.g. by

        @example
        VBCC=<prefix>/vbcc
        @end example

        or

        @example
        setenv VBCC <prefix>/vbcc
        @end example

    @item Include <prefix>/vbcc/bin to your search-path. Depending on your
        shell this might be done e.g. by

        @example
        PATH=<prefix>/vbcc/bin:"$PATH"
        @end example

        or

        @example
        setenv PATH <prefix>/vbcc/bin:"$PATH"
        @end example

    @end enumerate


@subsection Installing for DOS/Windows

    @enumerate

    @item Extract the archive.

    @item Set the environment variable @env{VBCC} to the vbcc directory.

        @example
        set VBCC=<prefix>\vbcc
        @end example

    @item Include <prefix>/vbcc/bin to your search-path.

        @example
        set PATH=<prefix>\vbcc\bin;%PATH%
        @end example

    @end enumerate


@subsection Installing for AmigaOS

    There is an Amiga Installer, which lets
    you install the binary and target archives with a simple mouse click.
    @command{vbcc} for AmigaOS/MorphOS is divided into the following
    packages:

    @table @file
    @item vbcc_bin_amigaos68k
	Binaries for AmigaOS 2.x/3.x (68020+).
    @item vbcc_bin_amigaosppc
	Binaries for AmigaOS 4.x (PowerPC).
    @item vbcc_bin_morphos
	Binaries for MorphOS (PowerPC).
    @item vbcc_bin_powerup
	Additional PPC-native binaries using the PowerUp kernel for
	AmigaOS 3.x.
    @item vbcc_bin_warpos
	Additional PPC-native binaries using the WarpOS kernel for
	AmigaOS 3.x.
    @item vbcc_target_m68k-kick13
	Header files and libraries for AmigaOS 1.x/M68k.
    @item vbcc_target_m68k-amigaos
	Header files and libraries for AmigaOS 2.x/3.x/M68k.
    @item vbcc_target_ppc-amigaos
	Header files and libraries for AmigaOS 4.x.
    @item vbcc_target_ppc-morphos
	Header files and libraries for MorphOS.
    @item vbcc_target_ppc-powerup
	Header files and libraries for PowerUp.
    @item vbcc_target_ppc-warpos
	Header files and libraries for WarpOS.
    @end table
   
    Usually you will install the binary archive for your host architecture
    of choice, then add as many target archives you need.

    When installing manually it is recommended to add the following
    assigns to your @file{s:User-Startup} file (only do the assignments
    required for the installed targets): 

@example
assign >NIL: vbcc: <path to vbcc directory>
assign >NIL: C: vbcc:bin add
 
assign >NIL: vincludeos1: vbcc:targets/m68k-kick13/include
assign >NIL: vincludeos1: <path to your Kickstart 1.x header files> ADD
assign >NIL: vlibos1: vbcc:targets/m68k-kick13/lib

assign >NIL: vincludeos3: vbcc:targets/m68k-amigaos/include
assign >NIL: vincludeos3: <path to your AmigaOS3 header files> ADD
assign >NIL: vlibos3: vbcc:targets/m68k-amigaos/lib

assign >NIL: vincludeos4: vbcc:targets/ppc-amigaos/include
assign >NIL: vincludeos4: <path to your AmigaOS4 header files> ADD
assign >NIL: vlibos4: vbcc:targets/ppc-amigaos/lib

assign >NIL: vincludemos: vbcc:targets/ppc-morphos/include
assign >NIL: vincludemos: <path to your MorphOS header files> ADD
assign >NIL: vlibmos: vbcc:targets/ppc-morphos/lib

assign >NIL: vincludepup: vbcc:targets/ppc-powerup/include
assign >NIL: vincludepup: <path to your PowerUp header files> ADD
assign >NIL: vincludepup: <path to your AmigaOS3 header files> ADD
assign >NIL: vlibpup: vbcc:targets/ppc-powerup/lib

assign >NIL: vincludewos: vbcc:target/ppc-warpos/include
assign >NIL: vincludewos: <path to your WarpOS header files> ADD
assign >NIL: vincludewos: <path to your AmigaOS3 header files> ADD
assign >NIL: vlibwos: vbcc:target/ppc-warpos/lib

@end example

    Also, the stack-size has to be increased from the default, for those
    binaries which don't do that automatically (e.g. AmigaOS4).
    64KB is a sensible value, for very large projects higher
    values might be necessary.

    For writing AmigaOS/MorphOS programs you will need the appropriate
    system header files. Please use NDK 3.9 or later for AmigaOS 2.x/3.x, as
    the proto/inline headers have been created with it.

    For AmigaOS 1.x you should use the old Kickstart 1.x headers from that
    time. It makes sure that you don't use a feature of later OS releases.

    There are different configuration files provided in the
    @file{config}-subdirectory to choose different targets (i.e.
    the system you want to generate programs for) and hosts
    (i.e. the system you want the compiler an tools to run on).
    The general naming-scheme for these files is <target>_<host>.

    Available config files, when all targets are installed, are
@table @file
@item aos68k
    AmigaOS 2.x/3.x.
@item aos68km
    AmigaOS 2.x/3.x with minimal startup code.
@item aos68kr
    AmigaOS 2.x/3.x for resident programs.
@item kick13
    AmigaOS 1.x.
@item kick13m
    AmigaOS 1.x with minimal startup code.
@item kick13r
    AmigaOS 1.x for resident programs.
@item aosppc
    AmigaOS 4.x on PPC using vclib.
@item newlib
    AmigaOS 4.x on PPC using newlib.
@item morphos
    PPC systems running MorphOS.
@item powerup
    PPC boards using the PowerUp system.
@item warpos
    PPC boards using the WarpOS system.
@end table

    You can choose one of these systems using the @option{+}-option
    of @command{vc}, e.g.

@example
    vc +aos68k_powerup ...
@end example

    will compile for AmigaOS/68k using the compiler running on PowerUp.

    You may choose to create copies of some of these configuration
    files with simpler names. E.g. if you usually want the compiler
    to run on WarpOS you could copy @file{aos68k_warpos} to @file{aos68k},
    @file{warpos_warpos} to @file{warpos} and so on. Then you can just specify
    the target and your preferred host system will be chosen automatically.

    Additionally, you may copy the configuration file for your preferred
    host/target-combination to
    @file{vc.config}. This configuration will be chosen by default if
    you do not specify anything.

    By default, the target-only-specifications use 68020-native tools on
    AmigaOS 2.x/3.x - e.g. @option{+warpos} will create code for WarpOS,
    but the compiler and tools will run on the 68k. The default
    @file{vc.config} will then create code for 68k using tools running
    on 68k. Having installed the MorphOS-native binary archive instead,
    the default @file{vc.config} will create PPC code for MorphOS using
    tools running on MorphOS.

@section Tutorial

    Now you should be able to use vbcc. To compile and
    link the program @file{hello.c}, type
 
@example
        vc hello.c
@end example
 
    The file @file{hello.c} will be compiled and linked, using the
    default configuration from @file{vc.config}, to create
    the executable a.out in the current directory.

@example
        vc hello.c -o hello
@end example
 
    will do the same, but the created executable will be called @file{hello}.
 
@example
        vc -c t1.c t2.c
@end example
 
    will compile @file{t1.c} and @file{t2.c} without linking, creating the
    object files @file{t1.o} and @file{t2.o}.
 
@example
        vc t1.o t2.o -o tt
@end example
 
    will link them together and create the executable @file{tt}.
 
    If your program uses floating point, you may have to link with a
    math-library. The details are dependent on the target, but usually
    @option{-lm} will be suitable (for AmigaOS on m68k choose one of
    @option{-lmieee}, @option{-lm881}, @option{-lm040} or @option{-lm060}).

@example 
        vc calc.c -o calc -lm
@end example


@node The Frontend
@chapter The Frontend
@include vc.texi

@node The Compiler
@chapter The Compiler
@include vbcc_main.texi


@node M68k/Coldfire Backend
@chapter M68k/Coldfire Backend
@include vbccm68k.texi

@node PowerPC Backend
@chapter PowerPC Backend
@include vbccppc.texi

@node DEC Alpha Backend
@chapter DEC Alpha Backend
@include vbccalpha.texi

@node i386 Backend
@chapter i386 Backend
@include vbcci386.texi

@node c16x Backend
@chapter c16x Backend
@include vbccc16x.texi

@node 68hc12 Backend
@chapter 68hc12 Backend
@include vbcchc12.texi

@node VideoCore IV Backend
@chapter VideoCore IV Backend
@include vbccvidcore.texi

@node 6502 Backend
@chapter 6502 Backend
@include vbcc6502.texi


@node Instruction Scheduler
@chapter Instruction Scheduler
@include vsc.texi

@node Code Compressor
@chapter Code Compressor
@include vcpr.texi

@node C Library
@chapter C Library
@include vclib.texi

@node List of Errors
@chapter List of Errors

@enumerate 0
@include errors.texi
@end enumerate

@chapter Backend Interface
@include interface.texi

@bye