Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
91c82e239This file is pinned to the selected release. Download the original to open it in your design tool.
; New gets library function for the monitor: development testbed
; Works together with c/test_programs/gets_test.c and therefore
; starts at 0xE000. Load this program first, before executing gets_test.c
;
; gets_test.c expects the following 4 words as a "magic" at 0xE000:
; 0xFF90, 0x0016, 0x2309, 0x1976
; It further expects the entry point of GETS to be 0xE004
;
; done by sy2002 in October 2016
; enhanced by sy2002 to support gets_s and gets_slf in December 2016
#include "../dist_kit/sysdef.asm"
#include "../dist_kit/monitor.def"
.ORG 0xE000
SYSCALL(exit, 1) ; 0xE000: 0xFF90 0x0016
.DW 0x2309, 0x1976 ; 0xE002: 0x2309 0x1976
; 0xE004: GETS entry for gets_test.c
;===================== REUSABLE CODE FOR MONITOR STARTS HERE =================
;
;***************************************************************************************
;* IO$GETS reads a zero terminated string from STDIN and echos typing on STDOUT
;*
;* ALWAYS PREFER IO$GETS_S OVER THIS FUNCTION!
;*
;* It accepts CR, LF and CR/LF as input terminator, so it directly works with various
;* terminal settings on UART and also with keyboards on PS/2 ("USB"). Furtheron, it
;* accepts BACKSPACE for editing the string.
;*
;* R8 has to point to a preallocated memory area to store the input line
;***************************************************************************************
;
IO$GETS MOVE R9, @--SP ; save original R9
MOVE R10, @--SP ; save original R10
XOR R9, R9 ; R9 = 0: unlimited chars
XOR R10, R10 ; R10 = 0: no LF at end of str.
RSUB IO$GETS_CORE, 1 ; get the unlimited string
MOVE @SP++, R10 ; restore original R10
MOVE @SP++, R9 ; restore original R9
RET
;
;***************************************************************************************
;* IO$GETS_S reads a zero terminated string from STDIN into a buffer with a
;* specified maximum size and echos typing on STDOUT
;*
;* It accepts CR, LF and CR/LF as input terminator, so it directly works with various
;* terminal settings on UART and also with keyboards on PS/2 ("USB"). Furtheron, it
;* accepts BACKSPACE for editing the string.
;*
;* A maximum amount of (R9 - 1) characters will be read, because the function will
;* add the zero terminator to the string, which then results in R9 words.
;*
;* R8 has to point to a preallocated memory area to store the input line
;* R9 specifies the size of the buffer, so (R9 - 1) characters can be read;
;* if R9 == 0, then an unlimited amount of characters is being read
;***************************************************************************************
;
IO$GETS_S MOVE R10, @--SP ; save original R10
XOR R10, R10 ; R10 = 0: no LF at end of str.
RSUB IO$GETS_CORE, 1 ; get string
MOVE @SP++, R10 ; restore original R10
RET
;
;***************************************************************************************
;* IO$GETS_SLF reads a zero terminated string from STDIN into a buffer with a specified
;* maximum size and echos typing on STDOUT. A line feed character is added
;* to the string in case the function is ended not "prematurely" by
;* reaching the buffer size, but by pressing CR or LF or CR/LF.
;*
;* It accepts CR, LF and CR/LF as input terminator, so it directly works with various
;* terminal settings on UART and also with keyboards on PS/2 ("USB"). Furtheron, it
;* accepts BACKSPACE for editing the string.
;*
;* A maximum amount of (R9 - 1) characters will be read, because the function will
;* add the zero terminator to the string, which then results in R9 words.
;*
;* R8 has to point to a preallocated memory area to store the input line
;* R9 specifies the size of the buffer, so (R9 - 1) characters can be read;
;* if R9 == 0, then an unlimited amount of characters is being read
;***************************************************************************************
;
IO$GETS_SLF MOVE R10, @--SP ; save original R10
MOVE 1, R10 ; R10 = 1: add LF, if the function
; ends regularly, i.e. by a key
; stroke (LF, CR or CR/LF)
RSUB IO$GETS_CORE, 1 ; get string
MOVE @SP++, R10 ; restore original R10
RET
;
;***************************************************************************************
;* IO$GETS_CORE implements the various gets variants.
;*
;* Refer to the comments for IO$GETS, IO$GET_S and IO$GET_SLF
;*
;* R8 has to point to a preallocated memory area to store the input line
;* R9 specifies the size of the buffer, so (R9 - 1) characters can be read;
;* if R9 == 0, then an unlimited amount of characters is being read
;* R10 specifies the LF behaviour: R10 = 0 means never add LF, R10 = 1 means: add a
;* LF when the input is ended by a key stroke (LF, CR or CR/LF) in contrast to
;* automatically ending due to a full buffer
;***************************************************************************************
;
IO$GETS_CORE INCRB
MOVE R10, @--SP ; save original R10
MOVE R11, @--SP ; save original R11
MOVE R12, @--SP ; save original R12
MOVE R10, R12 ; R12 = add LF flag
XOR R11, R11 ; R11 = character counter = 0
MOVE R9, R10 ; R10 = max characters
SUB 1, R10 ; R10 = R9 - 1 characters
MOVE R8, R0 ; save original R8
MOVE R8, R1 ; R1 = working pointer
_IO$GETS_LOOP CMP R9, 0 ; unlimited characters?
RBRA _IO$GETS_GETC, Z ; yes
CMP R11, R10 ; buffer size - 1 reached?
RBRA _IO$GETS_ZT, Z ; yes: add zero terminator
ADD 1, R11 ; no: next character
_IO$GETS_GETC SYSCALL(getc, 1) ; get char from STDIN
CMP R8, 0x000D ; accept CR as line end
RBRA _IO$GETS_CR, Z
CMP R8, 0x000A ; accept LF as line end
RBRA _IO$GETS_LF, Z
CMP R8, 0x0008 ; use BACKSPACE for editing
RBRA _IO$GETS_BS, Z
CMP R8, 0x007F ; treat DEL key as BS, e.g. for ..
RBRA _IO$GETS_DEL, Z ; .. MAC compatibility in EMU
_IO$GETS_ADDBUF MOVE R8, @R1++ ; store char to buffer
_IO$GETS_ECHO SYSCALL(putc, 1) ; echo char on STDOUT
RBRA _IO$GETS_LOOP, 1 ; next character
_IO$GETS_LF CMP R12, 0 ; evaluate LF flag
RBRA _IO$GETS_ZT, Z ; 0 = do not add LF flag
MOVE 0x000A, @R1++ ; add LF
_IO$GETS_ZT MOVE 0, @R1 ; add zero terminator
MOVE R0, R8 ; restore original R8
MOVE @SP++, R12 ; restore original R12
MOVE @SP++, R11 ; restore original R11
MOVE @SP++, R10 ; restore original R10
DECRB
RET
; For also accepting CR/LF, we need to do a non-blocking
; check on STDIN, if there is another character waiting.
; IO$GETCHAR is a blocking call, so we cannot use it here.
; STDIN = UART, if bit #0 of IO$SWITCH_REG = 0, otherwise
; STDIN = PS/2 ("USB") keyboard
;
; At a terminal speed of 115200 baud = 14.400 chars/sec
; (for being save, let us assume only 5.000 chars/sec)
; and a CPU frequency of 50 MHz we need to wait about
; 10.000 CPU cycles until we check, if the terminal program
; did send one other character. The loop at GETS_CR_WAIT
; costs about 7 cycles per iteration, so we loop (rounded up)
; 2.000 times.
; As a simplification, we assume the same waiting time
; for a PS/2 ("USB") keyboard
_IO$GETS_CR MOVE 2000, R3 ; CPU speed vs. transmit speed
_IO$GETS_CRWAIT SUB 1, R3
RBRA _IO$GETS_CRWAIT, !Z
MOVE IO$SWITCH_REG, R2 ; read the switch register
MOVE @R2, R2
AND 0x0001, R2 ; lowest bit set?
RBRA _IO$GETS_CRUART, Z ; no: read from UART
MOVE IO$KBD_STATE, R2 ; read the keyboard status reg.
MOVE @R2, R2
AND 0x0001, R2 ; char waiting/lowest bit set?
RBRA _IO$GETS_LF, Z ; no: then add zero term. and ret.
MOVE IO$KBD_DATA, R2 ; yes: read waiting character
MOVE @R2, R2
RBRA _IO$GETS_CR_LF, 1 ; check for LF
_IO$GETS_CRUART MOVE IO$UART_SRA, R2 ; read UART status register
MOVE @R2, R2
AND 0x0001, R2 ; is there a character waiting?
RBRA _IO$GETS_LF, Z ; no: then add zero term. and ret.
MOVE IO$UART_RHRA, R2 ; yes: read waiting character
MOVE @R2, R2
_IO$GETS_CR_LF CMP R2, 0x000A ; is it a LF (so we have CR/LF)?
RBRA _IO$GETS_LF, Z ; yes: then add zero trm. and ret.
; it is CR/SOMETHING, so add both: CR and "something" to
; the string and go on waiting for input, but only of the
; buffer is large enough. Otherwise only add CR.
MOVE 0x000D, @R1++ ; add CR
CMP R9, 0 ; unlimited characters?
RBRA _IO$GETS_CRSS, Z ; yes: go on and add SOMETHING
CMP R11, R10 ; buffer size - 1 reached?
RBRA _IO$GETS_ZT, Z ; yes: add zero terminator and end
ADD 1, R11 ; increase amount of stored chars
_IO$GETS_CRSS MOVE R2, R8 ; no: prepare to add SOMETHING
RBRA _IO$GETS_ADDBUF, 1 ; add it to buffer and go on
; handle BACKSPACE for editing and accept DEL as alias for BS
;
; For STDOUT = UART it is kind of trivial, because you "just"
; need to rely on the fact, that the terminal settings are
; correct and then the terminal program takes care of the
; nitty gritty details like moving the cursor and scrolling.
;
; For STDOUT = VGA, this needs to be done manually by this
; routine.
_IO$GETS_DEL MOVE 0x0008, R8 ; treat DEL as BS
_IO$GETS_BS SUB 1, R11 ; do not count DEL/BS character
CMP R0, R1 ; beginning of string?
RBRA _IO$GETS_LOOP, Z ; yes: ignore BACKSPACE key
SUB 1, R1 ; delete last char in memory
SUB 1, R11 ; do not count last char in mem.
MOVE IO$SWITCH_REG, R2 ; read the switch register
MOVE @R2, R2
AND 0x0002, R2 ; bit #1 set?
RBRA _IO$GETS_ECHO, Z ; no: STDOUT = UART: just echo
MOVE VGA$CR_X, R2 ; R2: HW X-register
MOVE VGA$CR_Y, R3 ; R3: HW Y-register
MOVE VGA$CHAR, R4 ; R4: HW put/get character reg.
MOVE _VGA$X, R5 ; R5: SW X-register
MOVE _VGA$Y, R6 ; R6: SW Y-register
CMP @R2, 0 ; cursor already at leftmost pos.?
RBRA _IO$GETS_BSLUP, Z ; yes: scroll one line up
SUB 1, @R2 ; cursor one position to the left
SUB 1, @R5
_IO$GETS_BSX MOVE 0x0020, @R4 ; delete char on the screen
RBRA _IO$GETS_LOOP, 1 ; next char/key
_IO$GETS_BSLUP CMP @R3, VGA$MAX_Y ; cursor already bottom line?
RBRA _IO$GETS_BSSUP, Z ; yes: scroll screen up
SUB 1, @R3 ; cursor one line up
SUB 1, @R6
_IO$GETS_BSXLU MOVE VGA$MAX_X, @R2 ; cursor to the rightpost pos.
MOVE VGA$MAX_X, @R5
RBRA _IO$GETS_BSX, 1 ; delete char on screen and go on
_IO$GETS_BSSUP MOVE VGA$OFFS_DISPLAY, R7 ; if RW > DISP then do not
MOVE VGA$OFFS_RW, R8 ; scroll up the screen
CMP @R8, @R7 ; see VGA$SCROLL_UP_1 for
RBRA _IO$GETS_BSUPSP, N ; an explanation
SUB VGA$CHARS_PER_LINE, @R7 ; do the visual scrolling
_IO$GETS_BSUPSP SUB VGA$CHARS_PER_LINE, @R8 ; scroll the RW window
CMP @R7, @R8 ; if after the scrolling
RBRA _IO$GETS_NOCRS, !Z ; RW = DISP then show
MOVE VGA$STATE, R8 ; the cursor
OR VGA$EN_HW_CURSOR, @R8
_IO$GETS_NOCRS MOVE VGA$MAX_Y, @R3 ; cursor to bottom
MOVE VGA$MAX_Y, @R6
RBRA _IO$GETS_BSXLU, 1 ; cursor to rightmost pos.
;===================== REUSABLE CODE FOR MONITOR ENDS HERE ===================
#include "../monitor/variables.asm"