proximity

# this is an example config file for pcb2gcode.
# place this in the same directory as your gerber files to save typing


# You may want to uncomment and change those in local project files
front=../gerber/proximity-Front.gtl
#back=../gerber/board.back.gbr
outline=../gerber/proximity-PCB_Edges.gbr
drill=../gerber/proximity.drl


# The board outline is 10mil wide, no holes
fill-outline = yes
outline-width = 0.016

# parameters for isolation routing / engraving / etching
#offset=1			# uncomment for voronoi regions
offset=0.008		# uncomment for 20mil isolator
zwork=0.001
zsafe=1.0
mill-feed=2
mill-speed=2000


# parameters for cutting out boards
cutter-diameter=0.004
zcut=0.001
cut-feed=2
cut-speed=2000
cut-infeed=0.1


# drilling parameters
zdrill=0.001
zchange=1.0
drill-feed=1
drill-speed=300
mirror-absolute=1
drill-front=1