🍕 PIZZAbite 🍕

A cheaper and open-hardware version of the blasoned Sensepeek's PCBite, perfect for holding your PCB while soldering or inspection. 📰BlogPost: https://www.whid.ninja/blog/pizzabite-bruschetta-board-the-hardware-hackers-tools-you-need-to-kickstart-your-own-lab 📺Video Review: https://www.youtube.com/watch?v=r7BOBPbq83M

The full kit is composed of:

• A commercially-available PCB holder from Aliexpress can be found here: https://s.click.aliexpress.com/e/_c3CCwTV5
• The PCBite probes PCBs:
• M4 Screws 6mm: - https://s.click.aliexpress.com/e/_c4mdpHoF
• Pogo Pings:
  • P50-B1 (Diameter 0.5mm) for the Small PIZZABite PCB- https://s.click.aliexpress.com/e/_c3kCEFgF
  • PA100-B1 (Diameter 1mm) for the Large PIZZABite PCB- https://s.click.aliexpress.com/e/_c2RIOBsF

The PIZZAbite PCBs be printed on JLCPCB: I tried 3 types of thicknesses... 1mm (white), 1.2mm (red) and 1.6mm (green). All of them works fine and even the 1mm thick version is robust! Just upload the gerber.zip file on JLCPCB and you almost done ordering it. 👍

The PIZZAbite PCB probes are mounted on flexible metal arm and a powerful magnet in the base for easy positioning. The one of the kind "lift and drop" function takes away the need for annoying and complicated set screws. Thanks to the extreme flexibility of the arms connected to the PIZZAbite PCBs, the compressible needle (a.k.a. PogoPin) maintain constant pressure at the probing point so even if the board is bumped into the probe tip will always stay in position.

Wanna Become a CERTIFIED HARDWARE HACKER?

The 𝙊𝙛𝙛𝙚𝙣𝙨𝙞𝙫𝙚 𝙃𝙖𝙧𝙙𝙬𝙖𝙧𝙚 𝙃𝙖𝙘𝙠𝙞𝙣𝙜 𝙏𝙧𝙖𝙞𝙣𝙞𝙣𝙜 is a Self-Paced training including Videos, a printed Workbook and a cool Hardware Hackit Kit. And... you get everything shipped home Worldwide! 🌍🔥😎 For more info... ➡ https://www.whid.ninja/store

Open-Hardware & KiCAD

Since someone may want to tweak PIZZAbite size... Attached you can find the KiCAD PCB design file. You are welcome! 😃

PCB Workstation 3D Printed

Here you can find a DIY PCB Workstation compatible with PIZZAbite! If you sit in Europe and do not have a 3D printer... I recommend this service for printing: https://craftrum.eu/ https://www.thingiverse.com/thing:6508356 [Based on the great work of https://www.thingiverse.com/giufini/designs ]

Screws and Nuts needed for the Hex Base + Holders:

• x4 Hex Screw M5x12mm https://s.click.aliexpress.com/e/_DC7sqYT
• x4 Washer M5 https://s.click.aliexpress.com/e/_DDbUWLD
• x4 Wing Nut M5 https://s.click.aliexpress.com/e/_DmdrBUf

Screws and Nuts needed for 6x Arms:

• x6 Hex Screw M5x12mm https://s.click.aliexpress.com/e/_DC7sqYT
• x6 Washer M5 https://s.click.aliexpress.com/e/_DDbUWLD
• x6 Wing Nut M5 https://s.click.aliexpress.com/e/_DmdrBUf
• x6 Wood Screw 2x6mm https://it.aliexpress.com/item/1005002306042593.html
• x6 Thumb Screw M2x10mm https://s.click.aliexpress.com/e/_DDPk1I3
• x6 Thumb Nut M2 https://it.aliexpress.com/item/4000284851766.html