Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
11c83de97This file is pinned to the selected release. Download the original to open it in your design tool.
# PCB Wrench


## About
PCB Wrench is an open hardware project for electronics kit makers. It was designed to create lots of small M3 wrenches at an affordable price **($0.09 USD per wrench)**. The wrenches are strong and can tighten M3 nuts with a surprising amount of torque.
**Demo video on how this project was started:**
[](http://www.youtube.com/watch?v=X2ZebSj626w "PCB Wrench - Open Hardware Cheap and Easy M3 Wrenches for Electronics Kits")
## Ordering
I used JLCPCB to produce my PCBs but PCB Way or any other fab should work too
- Go to https://jlcpcb.com/
- Click the **Order Now** button
- Upload the **[gerbers.zip](gerbers.zip)** file
- Set the order options to the following settings:

### :rotating_light::rotating_light::rotating_light: - IMPORTANT!!!! Add this comment to PCB Remarks - :rotating_light::rotating_light::rotating_light:
Please V-CUT as indicated in the Eco1_User gerber file.

Even if you specify the PCB to be panellized sometimes technicians will ignore the V-grooving (V-CUT) gerber file so it's important to add that comment.
[JLCPCB wants all of the milling operations in the Edge_Cuts gerber file/layer in KiCad (#7 on this page)](https://support.jlcpcb.com/article/68-instructions-for-ordering), but if you do that KiCad will give you an error if you try to use the 3D previewer.
