Patternflow

---
title: Build your own.
subtitle: Around US$100–200 and an hour of hands-on work.
meta:
  - label: Available now
    value: "3D print + PCB · breadboard"
  - label: Preparing
    value: "Laser cut"
  - label: Firmware
    value: "Browser flash or Arduino IDE"
cta:
  primary:
    label: "Open the assembly map ->"
    href: "https://github.com/engmung/Patternflow/blob/main/docs/assembly/README.md"
  secondary:
    label: "Current full guide"
    href: "https://github.com/engmung/Patternflow/blob/main/BUILD_GUIDE.md"
---

Patternflow is becoming a build system you can choose your way through: pick an enclosure path, pick an electronics path, then flash firmware.

The current supported combination is the original polished build: PLA 3D printed enclosure, hand-soldered custom PCB, and browser-flashed release firmware.

The breadboard electronics path is now available — wire the same parts with jumpers and a breadboard power rail, no custom PCB or soldering iron. Laser-cut enclosure files are still being prepared, so you can start with the tools you have, then upgrade when you want a more finished object.