Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
# v3.0.0 Launch Checklist
> **Historical (2026-07).** The one-off checklist used for the v3.0.0 release. The current procedure is [`docs/RELEASING.md`](../RELEASING.md); release notes since 3.2 live on [GitHub Releases](https://github.com/engmung/Patternflow/releases).
Everything for the v3.0.0 release is **pre-loaded**. When the final gate below passes, run the steps top to bottom — each is copy-paste. (Windows: run the PowerShell blocks in PowerShell, everything else in any terminal with `git` + `gh`.)
## Gate 0 — the one thing left (hardware)
- [x] **PASSED (2026-07-19).** The v3 `encloser.stl` printed, assembled with a v3.0 board, and works — documented end to end in the [assembly video](https://youtu.be/J9C9bZgkNKs), §9 checks included.
## Gate 1 — swap the two v2.1-twin photos
- [x] **Resolved differently (2026-07-19):** the stale v2.1-twin photos were removed from the guide entirely — the [assembly video](https://youtu.be/J9C9bZgkNKs) covers those steps. No re-shoot needed.
## Gate 2 — last-minute text
- [ ] `CHANGELOG.md`: the `## [3.0.0] - 2026-07` date — correct it if the month changed.
- [ ] Optional: rebuild firmware once so the flashed image reports `3.0.0` over Improv (`PF_IMPROV_FW_VERSION` is already bumped in `net_config.h`); copy the fresh `build/esp32.esp32.esp32s3/patternflow.ino*.bin` files over `web/public/flash/bin/v2/`. Skipping this is fine — the shipped image works identically, it just self-reports 2.0.0.
## Launch
```sh
# 1. Commit the photo/text changes and merge to main
git add -A -- BUILD_GUIDE.md CHANGELOG.md docs/build-guide/images/v3 web/public/flash
git commit -m "release: v3.0.0"
git push origin dev
gh pr create --base main --head dev --title "Release v3.0.0" --body "Final gate passed: v3 unit built and checked. Tag + release to follow."
gh pr merge --merge
```
```powershell
# 2. Build the release assets (PowerShell, from the repo root)
$s = "$env:TEMP\pf-release"; Remove-Item -Recurse -Force $s -ErrorAction SilentlyContinue; New-Item -ItemType Directory "$s\stl","$s\fw" | Out-Null
Copy-Item -Recurse hardware\case\bed_256mm,hardware\case\bed_330mm,hardware\case\knobs "$s\stl\"
Compress-Archive -Path "$s\stl\*" -DestinationPath "$s\patternflow_v3_case_stl_pack.zip" -Force
Copy-Item web\public\flash\bin\v2\patternflow.ino.bin,web\public\flash\bin\v2\patternflow.ino.bootloader.bin,web\public\flash\bin\v2\patternflow.ino.partitions.bin "$s\fw\"
@"
Patternflow v3.0.0 firmware - prebuilt ESP32-S3 binaries
(the same image served by the browser flasher at patternflow.work;
one image works on both v2.x and v3.0 boards)
Easiest: use the browser flasher (Chrome/Edge) at https://patternflow.work
Manual flash with esptool:
esptool.py --chip esp32s3 write_flash \
0x0 patternflow.ino.bootloader.bin \
0x8000 patternflow.ino.partitions.bin \
0x10000 patternflow.ino.bin
"@ | Out-File "$s\fw\README.txt" -Encoding utf8
Compress-Archive -Path "$s\fw\*" -DestinationPath "$s\patternflow_v3_firmware.zip" -Force
```
```sh
# 3. Tag + publish (run from the repo root; $env:TEMP\pf-release on Windows = use the full path below)
gh release create v3.0.0 --target main \
--title "Patternflow v3.0.0 — the hybrid-power generation" \
--notes-file docs/releases/v3.0.0.md \
"$TEMP/pf-release/patternflow_v3_case_stl_pack.zip" \
"$TEMP/pf-release/patternflow_v3_firmware.zip" \
hardware/pcb/gerber/patternflow_v3.0_gerber.zip \
hardware/case/source/patternflow_case.blend
```
> The `.blend` must be attached (it's the one LFS file — *Download ZIP* gives people a pointer instead of the real file). Verify after publishing: the release page should list **4 assets** and show `patternflow_case.blend` at ~45 MB, not ~130 bytes.
## After publishing
- [ ] Open the release page and sanity-check the rendered notes + 4 assets.
- [ ] Close [#190](https://github.com/engmung/Patternflow/issues/190) (build-guide tracker) — everything in it is done at this point.
- [ ] Announce wherever feels right (Discord, Instagram, journal). The README release badge updates itself.
- [ ] Someday, not urgent: the pattern-creation guide (deliberately decoupled from this release).
07e931b46This file is pinned to the selected release. Download the original to open it in your design tool.