Loading files
# Please note that this is only a sample, we recommend you to change it to fit
# your needs.
# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
# See http://buildroot.org/manual.html#rootfs-custom
# and http://elinux.org/RPiconfig for a description of config.txt syntax
start_file=start.elf
fixup_file=fixup.dat
kernel=zImage
# To use an external initramfs file
#initramfs rootfs.cpio.gz
# Disable overscan assuming the display supports displaying the full resolution
# If the text shown on the screen disappears off the edge, comment this out
disable_overscan=1
# How much memory in MB to assign to the GPU on Pi models having
# 256, 512 or 1024 MB total memory
gpu_mem_256=100
gpu_mem_512=100
gpu_mem_1024=100
# fixes rpi (3B, 3B+, 3A+, 4B ,zero W and zero 2) ttyAMA0 serial console
# dtoverlay=miniuart-bt (BT off for boot speed)
# enable autoprobing of Bluetooth driver without need of hciattach/btattach
# dtparam=krnbt=on (BT off)
# ===== OptoCam: camera =====
camera_auto_detect=0
dtoverlay=imx708
# ===== OptoCam: boot speed (safe, known-good) =====
disable_splash=1
hdmi_blanking=2
hdmi_ignore_hotplug=1
arm_freq=1200
over_voltage=2
initial_turbo=30
dtoverlay=disable-bt
gpio=24=op,dh
dtparam=spi=on
dtparam=audio=off
boot_delay=0
force_eeprom_read=0
disable_poe_fan=1
dtoverlay=cma,cma-128
d9772fbc4This file is pinned to the selected release. Download the original to open it in your design tool.