Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
e75c46856This file is pinned to the selected release. Download the original to open it in your design tool.
anlogicCable:
- Name: anlogic JTAG adapter
Description: JTAG adapter firmware for stm32
URL: https://github.com/AnlogicInfo/anlogic-usbjtag
arm-usb-ocd-h:
- Name: Olimex ARM-USB-OCD-H adapter
Description: High-speed 3-IN-1 fast USB ARM JTAG, USB-to-RS232 virtual port and power supply 5VDC device
URL: https://www.olimex.com/Products/ARM/JTAG/ARM-USB-OCD-H/
arm-usb-tiny-h:
- Name: Olimex ARM-USB-TINY-H adapter
Description: Low-cost high-speed ARM USB JTAG
URL: https://www.olimex.com/Products/ARM/JTAG/ARM-USB-TINY-H/
bus_blaster:
- Name: Dangerousprototypes Bus Blaster
Description: Jtag adapter based on ft2232
URL: http://dangerousprototypes.com/docs/Bus_Blaster
bus_blaster_b:
- Name: Dangerousprototypes Bus Blaster
Description: Jtag adapter based on ft2232 (interface B)
URL: http://dangerousprototypes.com/docs/Bus_Blaster
ch347_jtag:
- Name: ch347 JTAG adapter
Description: QinHeng Electronics USB To UART+JTAG (mode 3)
URL: https://www.wch-ic.com/products/CH347.html
ch552_jtag:
- Name: ch552 JTAG adapter
Description: Tang Nano USB-JTAG interface. FT2232C clone firmware for CH552 microcontroler
URL: https://github.com/diodep/ch55x_jtag
cmsisdap:
- Name: ARM CMSIS DAP protocol interface
Description: ARM CMSIS DAP protocol interface (hid only)
URL: https://os.mbed.com/docs/mbed-os/v6.11/debug-test/daplink.html
gatemate_pgm:
- Name: gatemate pgm
Description: Cologne Chip GateMate FPGA Programmer. FT232H-based JTAG/SPI programmer cable
URL: https://colognechip.com/programmable-logic/gatemate/
gatemate_evb_jtag:
- Name: gatemate evb JTAG
Description: Cologne Chip GateMate JTAG programmer
URL: https://colognechip.com/programmable-logic/gatemate/
gatemate_evb_spi:
- Name: gatemate evb spi
Description: Cologne Chip GateMate SPI programmer
URL: https://colognechip.com/programmable-logic/gatemate/
gwu2x:
- Name: gwu2x
Description: Gowin GWUX2X
URL: https://www.gowinsemi.com/en/product/detail/55/
dfu:
- Name: DFU interface
Description: DFU (Device Firmware Upgrade) USB device compatible with DFU protocol
URL: http://www.usb.org/developers/docs/devclass_docs/DFU_1.1.pdf
digilent:
- Name: digilent cable
Description: FT2232 JTAG / UART cable
diglent_b:
- Name: digilent cable
Description: digilent FT2232 JTAG / UART cable (interface B)
digilent_hs2:
- Name: digilent hs2 cable
Description: FT232H JTAG programmer cable from digilent
URL: https://store.digilentinc.com/jtag-hs2-programming-cable/
digilent_hs3:
- Name: digilent hs3
Description: JTAG programmer cable from digilent
URL: https://digilent.com/shop/jtag-hs3-programming-cable/
dirtyJtag:
- Name: dirty Jtag
Description: JTAG probe firmware for STM32F1
URL: https://github.com/jeanthom/DirtyJTAG
Note: Best to use release (1.4 or newer) or limit the --freq to 600000 with older releases.
New version `dirtyjtag2 <https://github.com/jeanthom/DirtyJTAG/tree/dirtyjtag2>`__ is also supported
efinix_spi_ft4232:
- Name: efinix SPI (ft4232)
Description: efinix SPI interface (FTDI4232 interface A)
efinix_jtag_ft4232:
- Name: efinix JTAG (ft4232)
Description: efinix JTAG interface (FTDI4232 interface B)
efinix_spi_ft2232:
- Name: efinix SPI (ft2232)
Description: efinix SPI interface (FTDI2232 interface A)
efinix_jtag_ft2232:
- Name: efinix JTAG (ft2232)
Description: efinix JTAG interface (FTDI2232 interface B)
ft2232:
- Name: FT2232 C/D/H
Description: generic programmer cable based on Ftdi FT2232 (interface A)
- Name: Tang Nano (1k, 4k, 8k) USB-JTAG interface
Description: USB-JTAG/UART debugger based on BL702 microcontroler.
URL: https://github.com/sipeed/RV-Debugger-BL702
- Name: Sipeed RV-Debugger-BL702
Description: RV-Debugger-BL702 is an opensource project that implement a JTAG+UART debugger with BL702C-A0.
URL: https://github.com/sipeed/RV-Debugger-BL702
- Name: honeycomb USB-JTAG interface.
Description: FT2232C clone based on STM32F042 microcontroler
URL: https://github.com/Disasm/f042-ftdi
ft2232_b:
- Name: FT2232 C/D/H
Description: generic programmer cable based on Ftdi FT2232 (interface B)
ft231X:
- Name: FT231X
Description: generic USB<->UART converters in bitbang mode (with some limitations and workaround)
URL: https://www.ftdichip.com/old2020/Products/ICs/FT231X.html
ft232:
- Name: FT232H
Description: generic programmer cable based on Ftdi FT232Hx. One interface, MPSSE capable
URL: https://ftdichip.com/products/ft232hl/
ft232RL:
- Name: FT232RL
Description: generic USB<->UART converters in bitbang mode (with some limitations and workaround)
URL: https://ftdichip.com/products/ft232rl/
ft4232:
- Name: FT4232
Description: quad interface programmer cable. MPSSE capable.
URL: https://ftdichip.com/products/ft4232h-56q/
ft4232hp:
- Name: FT4232HP (interface A)
Description: quad interface programmer cable. MPSSE capable. High Speed USB Bridge with Type-C/PD3.0 Controller
URL: https://ftdichip.com/wp-content/uploads/2023/02/DS_FT4233HP.pdf
ft4232hp_b:
- Name: FT4232HP (interface B)
Description: quad interface programmer cable. MPSSE capable. High Speed USB Bridge with Type-C/PD3.0 Controller
URL: https://ftdichip.com/wp-content/uploads/2023/02/DS_FT4233HP.pdf
ecpix5-debug:
- Name: ecpix5-debug
Description: LambdaConcept ECPIX5 (45k/85k) UART/JTAG interface
URL: https://shop.lambdaconcept.com/home/46-ecpix-5.html
jlink:
- Name: jlink
Description: SEGGER J-Link Debug Probes
URL: https://www.segger.com/products/debug-probes/j-link
- Name: jlink_base
Description: SEGGER J-Link BASE Debug Probes
- Name: jtrace_pro
Description: SEGGER J-Trace PRO Debug Probes
jtag-smt2-nc:
- Name: jtag-smt2-nc
Description: JTAG-SMT2-NC Surface-mount Programming Module
URL: https://digilent.com/shop/jtag-smt2-nc-surface-mount-programming-module
lpc-link2:
- Name: lpc-link2
Description: LPC-Link2 (OM13054) cmsisDAP firmware
URL: https://www.nxp.com/design/microcontrollers-developer-resources/lpc-link2:OM13054
numato:
- Name: numato
Description: Embedded cable for Numato Systems Mimas-A7 board
orbtrace:
- Name: orbtrace interface
Description: Open source FPGA-based debug and trace interface
URL: https://github.com/orbcode/orbtrace
papilio:
- Name: papilio
Description: Papilio FPGA Platform
URL: https://papilio.cc/
steppenprobe:
- Name: steppenprobe
Description: Open Source Hardware JTAG/SWD/UART/SWO interface board based on FTDI FT2232H
URL: https://github.com/diegoherranz/steppenprobe
remote-bitgang:
- Name: OpenOCD remote bitbang
Description: The remote_bitbang JTAG driver is used to drive JTAG from a remote (TCP) process
URL: https://github.com/openocd-org/openocd/blob/master/doc/manual/jtag/drivers/remote_bitbang.txt
tigard:
- Name: tigard
Description: SWD/JTAG/UART/SPI programmer based on Ftdi FT2232HQ
URL: https://www.crowdsupply.com/securinghw/tigard
usb-blaster:
- Name: intel USB Blaster I interface
Description: JTAG programmer cable from intel/altera (FT245 + EPM7064)
usb-blasterII:
- Name: intel USB Blaster II interface
Description: JTAG programmer cable from intel/altera (EZ-USB FX2 + EPM570)
URL: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr_ii_cable.pdf
usb-blasterIII:
- Name: intel USB Blaster III interface
Description: JTAG programmer cable from intel/altera (FTDI2232 with custom VID/PID)
URL: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr_ii_cable.pdf
xvc-client:
- Name: Xilinx Virtual Cable
Description: Xilinx Virtual Cable (XVC) is a TCP/IP-based protocol that acts like a JTAG cable.
URL: https://github.com/Xilinx/XilinxVirtualCable
xvc-server:
- Name: Xilinx Virtual Cable (server side)
Description: Xilinx Virtual Cable (XVC) is a TCP/IP-based protocol that acts like a JTAG cable.
URL: https://github.com/Xilinx/XilinxVirtualCable
libgpiod:
- Name: Bitbang GPIO
Description: Bitbang GPIO pins on Linux host.
URL: https://git.kernel.org/pub/scm/libs/libgpiod/libgpiod.git/
jetson-nano-gpio:
- Name: Bitbang GPIO
Description: Bitbang GPIO pins on Jetson Nano Linux host. Use /dev/mem to have a faster clock.
URL: https://github.com/jwatte/jetson-gpio-example
ch347:
- Name: CH347
Description: CH347 is a USB HS bus converter with UART, I2C, SPI and JTAG interfaces
URL: https://github.com/wuxx/USB-HS-Bridge