Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
// SPDX-License-Identifier: Apache-2.0
/*
* Copyright (C) 2019 Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
*/
#ifndef SRC_CABLE_HPP_
#define SRC_CABLE_HPP_
#include <map>
#include <string>
#include <cstdint>
/*!
* \brief define type of communication
*/
enum communication_type {
MODE_ANLOGICCABLE = 0, /*! JTAG probe from Anlogic */
MODE_CH552_JTAG, /*! ch552_jtag firmware */
MODE_FTDI_BITBANG, /*! used with ft232RL/ft231x */
MODE_FTDI_SERIAL, /*! ft2232, ft232H */
MODE_JLINK, /*! ft2232, ft232H */
MODE_DIRTYJTAG, /*! JTAG probe firmware for STM32F1 */
MODE_USBBLASTER, /*! JTAG probe firmware for USBBLASTER */
MODE_CMSISDAP, /*! CMSIS-DAP JTAG probe */
MODE_DFU, /*! DFU based probe */
MODE_XVC_CLIENT, /*! Xilinx Virtual Cable client */
MODE_LIBGPIOD_BITBANG, /*! Bitbang gpio pins */
MODE_JETSONNANO_BITBANG, /*! Bitbang gpio pins */
MODE_REMOTEBITBANG, /*! Remote Bitbang mode */
MODE_CH347, /*! CH347 JTAG mode */
MODE_GWU2X, /*! Gowin GWU2X JTAG mode */
};
/*!
* \brief FTDI specific configuration structure
*/
typedef struct {
int interface; /*! FTDI interface (A, B, C, D) */
int bit_low_val; /*! xDBUS 0-7 default value */
int bit_low_dir; /*! xDBUS 0-7 default direction (0: in, 1: out) */
int bit_high_val; /*! xCBUS 0-7 default value */
int bit_high_dir; /*! xCBUS 0-7 default direction (0: in, 1: out) */
int index;
int status_pin;
} mpsse_bit_config;
/*!
* \brief FTDI interface ID
*/
enum ftdi_if {
FTDI_INTF_A = 1,
FTDI_INTF_B = 2,
FTDI_INTF_C = 3,
FTDI_INTF_D = 4
};
/*!
* \brief cable characteristics
*/
struct cable_t {
communication_type type; /*! see enum communication_type */
int vid; /*! Vendor ID */
int pid; /*! Product ID */
uint8_t bus_addr; /*! bus number (must be set to 0: user defined */
uint8_t device_addr; /*! device number (must be set 0: user defined */
mpsse_bit_config config; /*! FTDI specific configurations */
};
/* FTDI serial (MPSSE) configuration */
#define FTDI_SER(_vid, _pid, _intf, _blv, _bld, _bhv, _bhd) \
{MODE_FTDI_SERIAL, _vid, _pid, 0, 0, {_intf, _blv, _bld, _bhv, _bhd, 0, -1}}
/* FTDI bitbang configuration */
#define FTDI_BB(_vid, _pid, _intf, _blv, _bld, _bhv, _bhd) \
{MODE_FTDI_BITBANG, _vid, _pid, 0, 0, {_intf, _blv, _bld, _bhv, _bhd, 0, -1}}
/* CMSIS DAP configuration */
#define CMSIS_CL(_vid, _pid) \
{MODE_CMSISDAP, _vid, _pid, 0, 0, {}}
/* Others cable configuration */
#define CABLE_DEF(_type, _vid, _pid) \
{_type, _vid, _pid, 0, 0, {}}
#define CABLE_DEF_FULL(_type, _vid, _pid, _blv, _bld, _bhv, _bhd) \
{_type, _vid, _pid, 0, 0, {0, _blv, _bld, _bhv, _bhd, 0, -1}}
static std::map <std::string, cable_t> cable_list = {
// last 4 bytes are ADBUS7-0 value, ADBUS7-0 direction, ACBUS7-0 value, ACBUS7-0 direction
// some cables requires explicit values on some of the I/Os
{"anlogicCable", CABLE_DEF(MODE_ANLOGICCABLE, 0x0547, 0x1002)},
{"arm-usb-ocd-h", FTDI_SER(0x15ba, 0x002b, FTDI_INTF_A, 0x08, 0x1B, 0x09, 0x0B)},
{"bus_blaster", FTDI_SER(0x0403, 0x6010, FTDI_INTF_A, 0x08, 0x1B, 0x08, 0x0B)},
{"bus_blaster_b", FTDI_SER(0x0403, 0x6010, FTDI_INTF_B, 0x08, 0x0B, 0x08, 0x0B)},
{"ch552_jtag", FTDI_SER(0x0403, 0x6010, FTDI_INTF_A, 0x08, 0x0B, 0x08, 0x0B)},
{"ch347_jtag", CABLE_DEF(MODE_CH347, 0x1a86, 0x55dd )},
{"cmsisdap", CMSIS_CL(0x0d28, 0x0204 )},
{"gatemate_pgm", FTDI_SER(0x0403, 0x6014, FTDI_INTF_A, 0x10, 0x9B, 0x14, 0x17)},
{"gatemate_evb_jtag", FTDI_SER(0x0403, 0x6010, FTDI_INTF_A, 0x10, 0x1B, 0x00, 0x01)},
{"gatemate_evb_spi", FTDI_SER(0x0403, 0x6010, FTDI_INTF_B, 0x00, 0x1B, 0x00, 0x01)},
{"dfu", CABLE_DEF(MODE_DFU, 0, 0 )},
{"digilent", FTDI_SER(0x0403, 0x6010, FTDI_INTF_A, 0xe8, 0xeb, 0x00, 0x60)},
{"digilent_b", FTDI_SER(0x0403, 0x6010, FTDI_INTF_B, 0xe8, 0xeb, 0x00, 0x60)},
{"digilent_hs2", FTDI_SER(0x0403, 0x6014, FTDI_INTF_A, 0xe8, 0xeb, 0x00, 0x60)},
{"digilent_hs3", FTDI_SER(0x0403, 0x6014, FTDI_INTF_A, 0x88, 0x8B, 0x20, 0x30)},
{"digilent_ad", FTDI_SER(0x0403, 0x6014, FTDI_INTF_A, 0x08, 0x0B, 0x80, 0x80)},
{"dirtyJtag", CABLE_DEF(MODE_DIRTYJTAG, 0x1209, 0xC0CA )},
{"efinix_spi_ft4232", FTDI_SER(0x0403, 0x6011, FTDI_INTF_A, 0x08, 0x8B, 0x00, 0x00)},
{"efinix_jtag_ft4232", FTDI_SER(0x0403, 0x6011, FTDI_INTF_B, 0x08, 0x8B, 0x00, 0x00)},
{"efinix_spi_ft2232", FTDI_SER(0x0403, 0x6010, FTDI_INTF_A, 0x08, 0x8B, 0x00, 0x00)},
{"efinix_jtag_ft2232", FTDI_SER(0x0403, 0x6010, FTDI_INTF_B, 0x08, 0x8B, 0x00, 0x00)},
{"ft2232", FTDI_SER(0x0403, 0x6010, FTDI_INTF_A, 0x08, 0x0B, 0x08, 0x0B)},
{"ft2232_b", FTDI_SER(0x0403, 0x6010, FTDI_INTF_B, 0x08, 0x0B, 0x00, 0x00)},
{"ft231X", FTDI_BB (0x0403, 0x6015, FTDI_INTF_A, 0x00, 0x00, 0x00, 0x00)},
{"ft232", FTDI_SER(0x0403, 0x6014, FTDI_INTF_A, 0x08, 0x0B, 0x08, 0x0B)},
{"ft232RL", FTDI_BB( 0x0403, 0x6001, FTDI_INTF_A, 0x08, 0x0B, 0x08, 0x0B)},
{"ft4232", FTDI_SER(0x0403, 0x6011, FTDI_INTF_A, 0x08, 0x0B, 0x08, 0x0B)},
{"ft4232hp", FTDI_SER(0x0403, 0x6043, FTDI_INTF_A, 0x08, 0x0B, 0x00, 0x00)},
{"ft4232hp_b", FTDI_SER(0x0403, 0x6043, FTDI_INTF_B, 0x08, 0x0B, 0x00, 0x00)},
{"gwu2x", CABLE_DEF_FULL(MODE_GWU2X, 0x33AA, 0x0120, 0x02, 0x07, 0x0, 0x0)},
{"ecpix5-debug", FTDI_SER(0x0403, 0x6010, FTDI_INTF_A, 0xF8, 0xFB, 0xFF, 0xFF)},
{"jlink", CABLE_DEF(MODE_JLINK, 0x1366, 0x0105 )},
{"jlink_base", CABLE_DEF(MODE_JLINK, 0x1366, 0x0101 )},
{"jtrace_pro", CABLE_DEF(MODE_JLINK, 0x1366, 0x1020 )},
{"jtag-smt2-nc", FTDI_SER(0x0403, 0x6014, FTDI_INTF_A, 0xe8, 0xeb, 0x00, 0x60)},
{"lpc-link2", CMSIS_CL(0x1fc9, 0x0090 )},
{"numato", FTDI_SER(0x2a19, 0x1009, FTDI_INTF_B, 0x08, 0x4b, 0x00, 0x00)},
{"orbtrace", CMSIS_CL(0x1209, 0x3443 )},
{"papilio", FTDI_SER(0x0403, 0x6010, FTDI_INTF_A, 0x08, 0x0B, 0x09, 0x0B)},
{"steppenprobe", FTDI_SER(0x0403, 0x6010, FTDI_INTF_A, 0x58, 0xFB, 0x00, 0x99)},
{"tigard", FTDI_SER(0x0403, 0x6010, FTDI_INTF_B, 0x08, 0x3B, 0x00, 0x00)},
{"usb-blaster", CABLE_DEF(MODE_USBBLASTER, 0x09Fb, 0x6001 )},
{"usb-blasterII", CABLE_DEF(MODE_USBBLASTER, 0x09Fb, 0x6810 )},
{"xvc-client", CABLE_DEF(MODE_XVC_CLIENT, 0x0000, 0x0000 )},
#ifdef ENABLE_LIBGPIOD
{"libgpiod", CABLE_DEF(MODE_LIBGPIOD_BITBANG, 0, 0x0000 )},
#endif
#ifdef ENABLE_JETSONNANOGPIO
{"jetson-nano-gpio", {MODE_JETSONNANO_BITBANG, {}}},
#endif
#ifdef ENABLE_REMOTEBITBANG
{"remote-bitbang", CABLE_DEF(MODE_REMOTEBITBANG, 0x0000, 0x0000 )},
#endif
};
#endif // SRC_CABLE_HPP_
23cbdbf0eThis file is pinned to the selected release. Download the original to open it in your design tool.