Open-source 4-in-1 AM32 ESC for FPV drones. 30.5x30.5 mm, 2-8S, one MCU per motor, CERN-OHL-S-2.0.
Loading README and project media…
Open source 4-in-1 BLDC ESC with a 30.5 x 30.5 mm mounting pattern, part of the incutec OpenDrone line. Four independent motor controllers, each with its own MCU, gate driver and six MOSFETs, running AM32 and taking DShot over the standard 8-pin connector.
Maintained by @Just4Stan.
| Continuous | 60 A / channel |
| Firmware | AM32 |
| ESC protocol | DShot, bidirectional |
| Telemetry | Extended DShot |
| Input | 2-8S LiPo (6.0-33.6 V) |
| BEC | None |
| MCU | One per motor |
| MOSFETs | 6 per motor |
| Current sense | On-board, 330 A |
| FC connector | JST-SH 8-pin |
| Mounting | 30.5 x 30.5 mm, 4.0 mm holes |
| Dimensions | 41.6 x 42.5 mm |
| PCB | 6-layer, 1.6 mm, 2 oz copper |
Technical write-up, part list and layout constraints: AGENTS.md.
What pairs with what, and what is available: opendrone.be.
See CONTRIBUTING.md.
Hardware licensed under CERN-OHL-S-2.0, see LICENSE.