Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
0aeef0924This file is pinned to the selected release. Download the original to open it in your design tool.
use glam::dvec3;
use opencascade::{
primitives::{Direction, Shape},
workplane::Workplane,
};
pub fn shape() -> Shape {
// The origin of the coordinate system is the closest bottom left corner of
// the PC box, when viewing its ports from behind.
let case_thickness = 2.0;
let case_width = 212.0;
let case_height = 60.0;
let case_depth = 64.0; // Not measured, arbitrary value
let hook_thickness = 3.0;
let wire_gap = 2.6;
let case_box = Shape::box_with_dimensions(case_width, case_height, case_depth);
let back_face = case_box.faces().farthest(Direction::PosY);
let case_box = case_box.hollow(case_thickness, [back_face]);
let port_cutout = Workplane::xz()
.sketch()
.move_to(10.0, 9.0)
.line_to(10.0, 55.0)
.line_to(200.0, 55.0)
.line_to(200.0, 9.0)
.close()
.to_face();
let cutout = port_cutout.extrude(dvec3(0.0, -case_thickness, 0.0)).into();
let mut case_box = case_box.subtract(&cutout);
// Add the back hooks
let bottom_face = case_box.faces().farthest(Direction::NegZ);
for x_offset in [-75.0, -25.0, 25.0, 75.0] {
let mut hook: Shape = bottom_face
.workplane()
.translated(dvec3(x_offset, -20.0, 0.0))
.rect(40.0, 20.0)
.to_face()
.extrude(dvec3(0.0, 0.0, -(hook_thickness + wire_gap)))
.into();
let hook_bottom = hook.faces().farthest(Direction::NegY);
let hook_descent = hook_bottom
.workplane()
.translated(dvec3(0.0, -(hook_thickness + wire_gap) / 2.0 + hook_thickness / 2.0, 0.0))
.rect(40.0, hook_thickness)
.to_face()
.extrude(dvec3(0.0, -20.0, 0.0))
.into();
hook = hook.union(&hook_descent).into();
let bottom_hook_edges =
hook.faces().farthest(Direction::NegY).edges().parallel_to(Direction::PosZ);
hook = hook.fillet_edges(10.0, bottom_hook_edges);
case_box = case_box.union(&hook);
}
// Punch some holes in the back for optional zipties
for x_offset in [-100.0, -50.0, 0.0, 50.0, 100.0] {
let ziptie_hole = bottom_face
.workplane()
.translated(dvec3(x_offset, -20.0, 0.0))
.circle(0.0, 0.0, 2.25)
.to_face()
.extrude(dvec3(0.0, 0.0, 10.0))
.into();
case_box = case_box.subtract(&ziptie_hole)
}
// Cut out a circle on the front
let front_face = case_box
.faces()
.farthest(Direction::PosZ)
.workplane()
.translated(dvec3(0.0, 75.0, 0.0))
.circle(0.0, 0.0, 100.0)
.to_face();
front_face.subtractive_extrude(&case_box, -case_thickness)
}