OCCT

// Created on: 1994-11-22
// Created by: Laurent BOURESCHE
// Copyright (c) 1994-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#include <Adaptor3d_Surface.hxx>
#include <ChFiDS_Spine.hxx>
#include <ChFiDS_SurfData.hxx>
#include <ChFiKPart_ComputeData.hxx>
#include <ChFiKPart_ComputeData_Fcts.hxx>
#include <ElSLib.hxx>
#include <gce_MakeCirc.hxx>
#include <Geom2d_Curve.hxx>
#include <Geom2d_Line.hxx>
#include <Geom_Circle.hxx>
#include <Geom_Curve.hxx>
#include <Geom_SphericalSurface.hxx>
#include <GeomAdaptor_Curve.hxx>
#include <GeomAdaptor_Surface.hxx>
#include <gp.hxx>
#include <gp_Ax3.hxx>
#include <gp_Circ.hxx>
#include <gp_Dir.hxx>
#include <gp_Lin2d.hxx>
#include <gp_Pnt.hxx>
#include <gp_Pnt2d.hxx>
#include <gp_Vec2d.hxx>
#include <Precision.hxx>
#include <TopOpeBRepDS_DataStructure.hxx>

//=======================================================================
// function : ChFiKPart_Sphere
// purpose  : Construction of a spherical fillet the contours which of
//           are not all isos, from three tops.
//=======================================================================
bool ChFiKPart_Sphere(TopOpeBRepDS_DataStructure&           DStr,
                      const occ::handle<ChFiDS_SurfData>&   Data,
                      const occ::handle<Adaptor3d_Surface>& S1,
                      const occ::handle<Adaptor3d_Surface>& S2,
                      const TopAbs_Orientation              OrFace1,
                      const TopAbs_Orientation /*OrFace2*/,
                      const TopAbs_Orientation Or1,
                      const TopAbs_Orientation,
                      const double    Rad,
                      const gp_Pnt2d& PS1,
                      const gp_Pnt2d& P1S2,
                      const gp_Pnt2d& P2S2)
{
  // Construction of the sphere :
  // - pole south on PS1
  // - origine of u given by P1S2
  // - u+ to P2S2

  double ptol = Precision::Confusion();
  gp_Pnt p1, p2, p3;
  gp_Vec v1, v2;
  S1->D1(PS1.X(), PS1.Y(), p1, v1, v2);
  gp_Dir ds1(v1.Crossed(v2));
  gp_Dir df1   = ds1;
  gp_Dir dnat1 = ds1;
  if (Or1 == TopAbs_REVERSED)
  {
    ds1.Reverse();
  }
  if (OrFace1 == TopAbs_REVERSED)
  {
    df1.Reverse();
  }
  S2->D0(P1S2.X(), P1S2.Y(), p2);
  S2->D0(P2S2.X(), P2S2.Y(), p3);
  gp_Circ ci    = gce_MakeCirc(p1, p2, p3);
  gp_Dir  di    = ci.Axis().Direction();
  gp_Pnt  pp    = ci.Location();
  double  rr    = ci.Radius();
  double  delta = sqrt(Rad * Rad - rr * rr);
  gp_Pnt  cen(pp.X() + delta * di.X(), pp.Y() + delta * di.Y(), pp.Z() + delta * di.Z());
  gp_Dir  dz(gp_Vec(p1, cen));
  if (std::abs(ds1.Dot(dz) - 1.) > ptol)
  {
    cen.SetCoord(pp.X() - delta * di.X(), pp.Y() - delta * di.Y(), pp.Z() - delta * di.Z());
    dz = gp_Dir(gp_Vec(p1, cen));
    if (std::abs(ds1.Dot(dz) - 1.) > ptol)
    {
#ifdef OCCT_DEBUG
      std::cout << "center of the spherical corner not found" << std::endl;
#endif
      return false;
    }
  }
  gp_Dir ddx(gp_Vec(cen, p2));
  gp_Dir dddx = ddx;
  gp_Dir ddy(gp_Vec(cen, p3));
  gp_Dir dx  = dz.Crossed(ddx.Crossed(dz));
  gp_Dir ddz = dz.Reversed();
  gp_Ax3 FilAx3(cen, dz, dx);
  if (FilAx3.YDirection().Dot(ddy) <= 0.)
  {
    FilAx3.YReverse();
    ddz.Reverse();
    dddx.Reverse();
  }
  occ::handle<Geom_SphericalSurface> gsph = new Geom_SphericalSurface(FilAx3, Rad);
  Data->ChangeSurf(ChFiKPart_IndexSurfaceInDS(gsph, DStr));

  // the normal of the sphere is compared to the normal of the face
  // oriented to determine the final orientation of the fillet.
  bool toreverse = (ddz.Dot(df1) <= 0.);
  if (toreverse)
  {
    Data->ChangeOrientation() = TopAbs_REVERSED;
  }
  else
  {
    Data->ChangeOrientation() = TopAbs_FORWARD;
  }

  // Parameters of p2 and p3 are calculated on the Sphere to have
  // ranges of curves.
  double uu1, vv1, uu2, vv2;
  ElSLib::SphereParameters(FilAx3, Rad, p2, uu1, vv1);
  uu1 = 0.;
  ElSLib::SphereParameters(FilAx3, Rad, p3, uu2, vv2);

  // FaceInterferences are loaded with pcurves and curves 3d.

  // Pointed side.

  occ::handle<Geom_Curve>   C;
  occ::handle<Geom2d_Curve> C2d;
  gp_Pnt2d                  p2dFil(0., -M_PI / 2.);
  gp_Lin2d                  lin2dFil(p2dFil, gp::DX2d());
  occ::handle<Geom2d_Curve> C2dFil = new Geom2d_Line(lin2dFil);
  toreverse                        = (ddz.Dot(dnat1) <= 0.);
  TopAbs_Orientation trans         = TopAbs_REVERSED;
  if (toreverse)
  {
    trans = TopAbs_FORWARD;
  }
  Data->ChangeInterferenceOnS1().SetInterference(ChFiKPart_IndexCurveInDS(C, DStr),
                                                 trans,
                                                 C2d,
                                                 C2dFil);

  // The other side.

  double  ang = ddx.Angle(ddy);
  gp_Dir  dci = ddx.Crossed(ddy);
  gp_Ax2  axci(cen, dci, ddx);
  gp_Circ ci2(axci, Rad);
  C = new Geom_Circle(ci2);
  GeomAdaptor_Surface AS(gsph);
  GeomAdaptor_Curve   AC(C, 0., ang);
  ChFiKPart_ProjPC(AC, AS, C2dFil);
  gp_Pnt2d p2dbid = C2dFil->Value(0.);
  gp_Pnt2d pp2dbid(uu1, vv1);
  if (!pp2dbid.IsEqual(p2dbid, ptol))
  {
    gp_Vec2d v2dbid(p2dbid, pp2dbid);
    C2dFil->Translate(v2dbid);
  }
  gp_Vec2d v2d(P1S2, P2S2);
  gp_Dir2d d2d(v2d);
  if (std::abs(v2d.Magnitude() - ang) <= ptol)
  {
    gp_Lin2d l2d(P1S2, d2d);
    C2d = new Geom2d_Line(l2d);
  }
  else
  {
    C2d = ChFiKPart_PCurve(P1S2, P2S2, 0., ang);
  }
  gp_Pnt pp1;
  S2->D1(P1S2.X(), P1S2.Y(), pp1, v1, v2);
  gp_Dir ds2(v1.Crossed(v2));
  toreverse = (ds2.Dot(dddx) <= 0.);
  trans     = TopAbs_REVERSED;
  if (!toreverse)
  {
    trans = TopAbs_FORWARD;
  }
  Data->ChangeInterferenceOnS2().SetInterference(ChFiKPart_IndexCurveInDS(C, DStr),
                                                 trans,
                                                 C2d,
                                                 C2dFil);

  Data->ChangeVertexFirstOnS1().SetPoint(p1);
  Data->ChangeVertexLastOnS1().SetPoint(p1);
  Data->ChangeVertexFirstOnS2().SetPoint(p2);
  Data->ChangeVertexLastOnS2().SetPoint(p3);
  Data->ChangeInterferenceOnS1().SetFirstParameter(0.);
  Data->ChangeInterferenceOnS1().SetLastParameter(uu2);
  Data->ChangeInterferenceOnS2().SetFirstParameter(0.);
  Data->ChangeInterferenceOnS2().SetLastParameter(ang);

  return true;
}