Loading files
// Created on: 1998-05-18
// Created by: Philippe NOUAILLE
// Copyright (c) 1998-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.
#include <Blend_CurvPointFuncInv.hxx>
#include <Blend_FuncInv.hxx>
#include <BRepBlend_Line.hxx>
#include <BRepTopAdaptor_TopolTool.hxx>
#include <ChFi3d_Builder.hxx>
#include <ChFiDS_ElSpine.hxx>
#include <ChFiDS_Spine.hxx>
#include <ChFiDS_SurfData.hxx>
#include <TopOpeBRepBuild_HBuilder.hxx>
//=================================================================================================
void ChFi3d_Builder::SimulSurf(occ::handle<ChFiDS_SurfData>&,
const occ::handle<ChFiDS_ElSpine>&,
const occ::handle<ChFiDS_Spine>&,
const int,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const occ::handle<BRepAdaptor_Curve2d>&,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<BRepAdaptor_Curve2d>&,
bool&,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const TopAbs_Orientation,
const double,
const double,
double&,
double&,
const bool,
const bool,
const bool,
const bool,
const bool,
const bool,
const math_Vector&)
{
throw Standard_Failure("SimulSurf Not Implemented");
}
//=================================================================================================
void ChFi3d_Builder::SimulSurf(occ::handle<ChFiDS_SurfData>&,
const occ::handle<ChFiDS_ElSpine>&,
const occ::handle<ChFiDS_Spine>&,
const int,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const TopAbs_Orientation,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const occ::handle<BRepAdaptor_Curve2d>&,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<BRepAdaptor_Curve2d>&,
bool&,
const double,
const double,
double&,
double&,
const bool,
const bool,
const bool,
const bool,
const bool,
const bool,
const math_Vector&)
{
throw Standard_Failure("SimulSurf Not Implemented");
}
//=================================================================================================
void ChFi3d_Builder::SimulSurf(occ::handle<ChFiDS_SurfData>&,
const occ::handle<ChFiDS_ElSpine>&,
const occ::handle<ChFiDS_Spine>&,
const int,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const occ::handle<BRepAdaptor_Curve2d>&,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<BRepAdaptor_Curve2d>&,
bool&,
const TopAbs_Orientation,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const occ::handle<BRepAdaptor_Curve2d>&,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<BRepAdaptor_Curve2d>&,
bool&,
const TopAbs_Orientation,
const double,
const double,
double&,
double&,
const bool,
const bool,
const bool,
const bool,
const bool,
const bool,
const bool,
const math_Vector&)
{
throw Standard_Failure("SimulSurf Not Implemented");
}
//=================================================================================================
void ChFi3d_Builder::PerformSurf(NCollection_Sequence<occ::handle<ChFiDS_SurfData>>&,
const occ::handle<ChFiDS_ElSpine>&,
const occ::handle<ChFiDS_Spine>&,
const int,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const occ::handle<BRepAdaptor_Curve2d>&,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<BRepAdaptor_Curve2d>&,
bool&,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const TopAbs_Orientation,
const double,
const double,
const double,
double&,
double&,
const bool,
const bool,
const bool,
const bool,
const bool,
const bool,
const math_Vector&)
{
throw Standard_Failure("PerformSurf Not Implemented");
}
//=================================================================================================
void ChFi3d_Builder::PerformSurf(NCollection_Sequence<occ::handle<ChFiDS_SurfData>>&,
const occ::handle<ChFiDS_ElSpine>&,
const occ::handle<ChFiDS_Spine>&,
const int,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const TopAbs_Orientation,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const occ::handle<BRepAdaptor_Curve2d>&,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<BRepAdaptor_Curve2d>&,
bool&,
const double,
const double,
const double,
double&,
double&,
const bool,
const bool,
const bool,
const bool,
const bool,
const bool,
const math_Vector&)
{
throw Standard_Failure("PerformSurf Not Implemented");
}
//=================================================================================================
void ChFi3d_Builder::PerformSurf(NCollection_Sequence<occ::handle<ChFiDS_SurfData>>&,
const occ::handle<ChFiDS_ElSpine>&,
const occ::handle<ChFiDS_Spine>&,
const int,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const occ::handle<BRepAdaptor_Curve2d>&,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<BRepAdaptor_Curve2d>&,
bool&,
const TopAbs_Orientation,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<Adaptor3d_TopolTool>&,
const occ::handle<BRepAdaptor_Curve2d>&,
const occ::handle<BRepAdaptor_Surface>&,
const occ::handle<BRepAdaptor_Curve2d>&,
bool&,
const TopAbs_Orientation,
const double,
const double,
const double,
double&,
double&,
const bool,
const bool,
const bool,
const bool,
const bool,
const bool,
const bool,
const math_Vector&)
{
throw Standard_Failure("PerformSurf Not Implemented");
}
3d097a032This file is pinned to the selected release. Download the original to open it in your design tool.