Loading files
// Created on: 1995-01-27
// Created by: Jacques GOUSSARD
// Copyright (c) 1995-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.
#include <algorithm>
#include <GeomInt_IntSS.hxx>
#include <Adaptor3d_TopolTool.hxx>
#include <Approx_CurveOnSurface.hxx>
#include <ElSLib.hxx>
#include <Extrema_ExtPS.hxx>
#include <Geom2dAdaptor.hxx>
#include <Geom2dAdaptor_Curve.hxx>
#include <Geom2dInt_GInter.hxx>
#include <Geom2d_BSplineCurve.hxx>
#include <Geom2d_Line.hxx>
#include <Geom2d_TrimmedCurve.hxx>
#include <GeomAdaptor.hxx>
#include <GeomAdaptor_Surface.hxx>
#include <GeomInt.hxx>
#include <GeomInt_LineTool.hxx>
#include <GeomInt_WLApprox.hxx>
#include <GeomLib_Check2dBSplineCurve.hxx>
#include <GeomLib_CheckBSplineCurve.hxx>
#include <GeomProjLib.hxx>
#include <Geom_BSplineCurve.hxx>
#include <Geom_Circle.hxx>
#include <Geom_Ellipse.hxx>
#include <Geom_Hyperbola.hxx>
#include <Geom_Line.hxx>
#include <Geom_Parabola.hxx>
#include <Geom_TrimmedCurve.hxx>
#include <IntPatch_GLine.hxx>
#include <IntPatch_RLine.hxx>
#include <IntPatch_WLine.hxx>
#include <IntRes2d_IntersectionSegment.hxx>
#include <IntSurf_Quadric.hxx>
#include <Precision.hxx>
#include <ApproxInt_KnotTools.hxx>
//=================================================================================================
static void AdjustUPeriodic(const occ::handle<Geom_Surface>& aS,
const occ::handle<Geom2d_Curve>& aC2D)
{
if (aC2D.IsNull() || !aS->IsUPeriodic())
{
return;
}
//
constexpr double aEps = Precision::PConfusion(); // 1.e-9
const double aEpsilon = Epsilon(10.); // 1.77e-15
//
double umin, umax, vmin, vmax;
aS->Bounds(umin, umax, vmin, vmax);
const double aPeriod = aS->UPeriod();
const double aT1 = aC2D->FirstParameter();
const double aT2 = aC2D->LastParameter();
const double aTx = aT1 + 0.467 * (aT2 - aT1);
const gp_Pnt2d aPx = aC2D->Value(aTx);
//
double aUx = aPx.X();
if (fabs(aUx) < aEpsilon)
{
aUx = 0.;
}
if (fabs(aUx - aPeriod) < aEpsilon)
{
aUx = aPeriod;
}
//
double dU = 0.;
while (aUx < (umin - aEps))
{
aUx += aPeriod;
dU += aPeriod;
}
while (aUx > (umax + aEps))
{
aUx -= aPeriod;
dU -= aPeriod;
}
//
if (dU != 0.)
{
gp_Vec2d aV2D(dU, 0.);
aC2D->Translate(aV2D);
}
}
//=================================================================================================
static void GetQuadric(const occ::handle<GeomAdaptor_Surface>& HS1, IntSurf_Quadric& quad1)
{
switch (HS1->GetType())
{
case GeomAbs_Plane:
quad1.SetValue(HS1->Plane());
break;
case GeomAbs_Cylinder:
quad1.SetValue(HS1->Cylinder());
break;
case GeomAbs_Cone:
quad1.SetValue(HS1->Cone());
break;
case GeomAbs_Sphere:
quad1.SetValue(HS1->Sphere());
break;
case GeomAbs_Torus:
quad1.SetValue(HS1->Torus());
break;
default:
throw Standard_ConstructionError("GeomInt_IntSS::MakeCurve");
}
}
//=================================================================================================
static void Parameters(const occ::handle<GeomAdaptor_Surface>& HS1,
const occ::handle<GeomAdaptor_Surface>& HS2,
const gp_Pnt& Ptref,
double& U1,
double& V1,
double& U2,
double& V2)
{
IntSurf_Quadric quad1, quad2;
//
GetQuadric(HS1, quad1);
GetQuadric(HS2, quad2);
//
quad1.Parameters(Ptref, U1, V1);
quad2.Parameters(Ptref, U2, V2);
}
//=================================================================================================
static bool ParametersOfNearestPointOnSurface(const Extrema_ExtPS& theExtr,
double& theU,
double& theV)
{
if (!theExtr.IsDone() || !theExtr.NbExt())
{
return false;
}
int anIndex = 1;
double aMinSQDist = theExtr.SquareDistance(anIndex);
for (int i = 2; i <= theExtr.NbExt(); i++)
{
double aSQD = theExtr.SquareDistance(i);
if (aSQD < aMinSQDist)
{
aMinSQDist = aSQD;
anIndex = i;
}
}
theExtr.Point(anIndex).Parameter(theU, theV);
return true;
}
//=================================================================================================
static void GetSegmentBoundary(const IntRes2d_IntersectionSegment& theSegm,
const occ::handle<Geom2d_Curve>& theCurve,
NCollection_DynamicArray<double>& theArrayOfParameters)
{
double aU1 = theCurve->FirstParameter(), aU2 = theCurve->LastParameter();
if (theSegm.HasFirstPoint())
{
const IntRes2d_IntersectionPoint& anIPF = theSegm.FirstPoint();
aU1 = anIPF.ParamOnFirst();
}
if (theSegm.HasLastPoint())
{
const IntRes2d_IntersectionPoint& anIPL = theSegm.LastPoint();
aU2 = anIPL.ParamOnFirst();
}
theArrayOfParameters.Append(aU1);
theArrayOfParameters.Append(aU2);
}
//=================================================================================================
static void IntersectCurveAndBoundary(const occ::handle<Geom2d_Curve>& theC2d,
const occ::handle<Geom2d_Curve>* const theArrBounds,
const int theNumberOfCurves,
const double theTol,
NCollection_DynamicArray<double>& theArrayOfParameters)
{
if (theC2d.IsNull())
{
return;
}
Geom2dAdaptor_Curve anAC1(theC2d);
for (int aCurID = 0; aCurID < theNumberOfCurves; aCurID++)
{
if (theArrBounds[aCurID].IsNull())
{
continue;
}
Geom2dAdaptor_Curve anAC2(theArrBounds[aCurID]);
Geom2dInt_GInter anIntCC2d(anAC1, anAC2, theTol, theTol);
if (!anIntCC2d.IsDone() || anIntCC2d.IsEmpty())
{
continue;
}
for (int aPntID = 1; aPntID <= anIntCC2d.NbPoints(); aPntID++)
{
const double aParam = anIntCC2d.Point(aPntID).ParamOnFirst();
theArrayOfParameters.Append(aParam);
}
for (int aSegmID = 1; aSegmID <= anIntCC2d.NbSegments(); aSegmID++)
{
GetSegmentBoundary(anIntCC2d.Segment(aSegmID), theC2d, theArrayOfParameters);
}
}
}
//=======================================================================
// function : isDegenerated
// purpose : Check if theAHC2d corresponds to a degenerated edge.
//=======================================================================
static bool isDegenerated(const occ::handle<GeomAdaptor_Surface>& theGAHS,
const occ::handle<Adaptor2d_Curve2d>& theAHC2d,
const double theFirstPar,
const double theLastPar)
{
constexpr double aSqTol = Precision::Confusion() * Precision::Confusion();
gp_Pnt2d aP2d;
gp_Pnt aP1, aP2;
theAHC2d->D0(theFirstPar, aP2d);
theGAHS->D0(aP2d.X(), aP2d.Y(), aP1);
theAHC2d->D0(theLastPar, aP2d);
theGAHS->D0(aP2d.X(), aP2d.Y(), aP2);
if (aP1.SquareDistance(aP2) > aSqTol)
{
return false;
}
theAHC2d->D0(0.5 * (theFirstPar + theLastPar), aP2d);
theGAHS->D0(aP2d.X(), aP2d.Y(), aP2);
return aP1.SquareDistance(aP2) <= aSqTol;
}
//=================================================================================================
void GeomInt_IntSS::MakeCurve(const int Index,
const occ::handle<Adaptor3d_TopolTool>& dom1,
const occ::handle<Adaptor3d_TopolTool>& dom2,
const double Tol,
const bool Approx,
const bool ApproxS1,
const bool ApproxS2)
{
bool myApprox1, myApprox2, myApprox;
double Tolpc, myTolApprox;
IntPatch_IType typl;
occ::handle<Geom2d_BSplineCurve> H1;
occ::handle<Geom_Surface> aS1, aS2;
//
Tolpc = Tol;
myApprox = Approx;
myApprox1 = ApproxS1;
myApprox2 = ApproxS2;
myTolApprox = 0.0000001;
//
aS1 = myHS1->Surface();
aS2 = myHS2->Surface();
//
occ::handle<IntPatch_Line> L = myIntersector.Line(Index);
typl = L->ArcType();
//
if (typl == IntPatch_Walking)
{
occ::handle<IntPatch_WLine> aWLine(occ::down_cast<IntPatch_WLine>(L));
if (aWLine.IsNull())
{
return;
}
L = aWLine;
}
//
// Line Constructor
myLConstruct.Perform(L);
if (!myLConstruct.IsDone() || myLConstruct.NbParts() <= 0)
{
return;
}
// Do the Curve
bool ok;
int i, j, aNbParts;
double fprm, lprm;
occ::handle<Geom_Curve> newc;
switch (typl)
{
// ########################################
// Line, Parabola, Hyperbola
// ########################################
case IntPatch_Lin:
case IntPatch_Parabola:
case IntPatch_Hyperbola: {
if (typl == IntPatch_Lin)
{
newc = new Geom_Line(occ::down_cast<IntPatch_GLine>(L)->Line());
}
else if (typl == IntPatch_Parabola)
{
newc = new Geom_Parabola(occ::down_cast<IntPatch_GLine>(L)->Parabola());
}
else if (typl == IntPatch_Hyperbola)
{
newc = new Geom_Hyperbola(occ::down_cast<IntPatch_GLine>(L)->Hyperbola());
}
//
aNbParts = myLConstruct.NbParts();
for (i = 1; i <= aNbParts; i++)
{
myLConstruct.Part(i, fprm, lprm);
if (!Precision::IsNegativeInfinite(fprm) && !Precision::IsPositiveInfinite(lprm))
{
occ::handle<Geom_TrimmedCurve> aCT3D = new Geom_TrimmedCurve(newc, fprm, lprm);
sline.Append(aCT3D);
//
if (myApprox1)
{
occ::handle<Geom2d_Curve> C2d;
BuildPCurves(fprm, lprm, Tolpc, myHS1->Surface(), newc, C2d);
if (Tolpc > myTolReached2d || myTolReached2d == 0.)
{
myTolReached2d = Tolpc;
}
slineS1.Append(new Geom2d_TrimmedCurve(C2d, fprm, lprm));
}
else
{
slineS1.Append(H1);
}
//
if (myApprox2)
{
occ::handle<Geom2d_Curve> C2d;
BuildPCurves(fprm, lprm, Tolpc, myHS2->Surface(), newc, C2d);
if (Tolpc > myTolReached2d || myTolReached2d == 0.)
{
myTolReached2d = Tolpc;
}
//
slineS2.Append(new Geom2d_TrimmedCurve(C2d, fprm, lprm));
}
else
{
slineS2.Append(H1);
}
} // if (!Precision::IsNegativeInfinite(fprm) && !Precision::IsPositiveInfinite(lprm))
else
{
GeomAbs_SurfaceType typS1 = myHS1->GetType();
GeomAbs_SurfaceType typS2 = myHS2->GetType();
if (typS1 == GeomAbs_SurfaceOfExtrusion || typS1 == GeomAbs_OffsetSurface
|| typS1 == GeomAbs_SurfaceOfRevolution || typS2 == GeomAbs_SurfaceOfExtrusion
|| typS2 == GeomAbs_OffsetSurface || typS2 == GeomAbs_SurfaceOfRevolution)
{
sline.Append(newc);
slineS1.Append(H1);
slineS2.Append(H1);
continue;
}
bool bFNIt, bLPIt;
double aTestPrm, dT = 100.;
double u1, v1, u2, v2, TolX;
//
bFNIt = Precision::IsNegativeInfinite(fprm);
bLPIt = Precision::IsPositiveInfinite(lprm);
aTestPrm = 0.;
if (bFNIt && !bLPIt)
{
aTestPrm = lprm - dT;
}
else if (!bFNIt && bLPIt)
{
aTestPrm = fprm + dT;
}
//
gp_Pnt ptref(newc->Value(aTestPrm));
//
TolX = Precision::Confusion();
Parameters(myHS1, myHS2, ptref, u1, v1, u2, v2);
ok = (dom1->Classify(gp_Pnt2d(u1, v1), TolX) != TopAbs_OUT);
if (ok)
{
ok = (dom2->Classify(gp_Pnt2d(u2, v2), TolX) != TopAbs_OUT);
}
if (ok)
{
sline.Append(newc);
slineS1.Append(H1);
slineS2.Append(H1);
}
}
} // end of for (i=1; i<=myLConstruct.NbParts(); i++)
} // case IntPatch_Lin: case IntPatch_Parabola: case IntPatch_Hyperbola:
break;
// ########################################
// Circle and Ellipse
// ########################################
case IntPatch_Circle:
case IntPatch_Ellipse: {
if (typl == IntPatch_Circle)
{
newc = new Geom_Circle(occ::down_cast<IntPatch_GLine>(L)->Circle());
}
else
{
newc = new Geom_Ellipse(occ::down_cast<IntPatch_GLine>(L)->Ellipse());
}
//
double aPeriod, aRealEpsilon;
//
aRealEpsilon = RealEpsilon();
aPeriod = M_PI + M_PI;
//
aNbParts = myLConstruct.NbParts();
//
for (i = 1; i <= aNbParts; i++)
{
myLConstruct.Part(i, fprm, lprm);
//
if (std::abs(fprm) > aRealEpsilon || std::abs(lprm - aPeriod) > aRealEpsilon)
{
//==============================================
occ::handle<Geom_TrimmedCurve> aTC3D = new Geom_TrimmedCurve(newc, fprm, lprm);
//
sline.Append(aTC3D);
//
fprm = aTC3D->FirstParameter();
lprm = aTC3D->LastParameter();
////
if (myApprox1)
{
occ::handle<Geom2d_Curve> C2d;
BuildPCurves(fprm, lprm, Tolpc, myHS1->Surface(), newc, C2d);
if (Tolpc > myTolReached2d || myTolReached2d == 0.)
{
myTolReached2d = Tolpc;
}
slineS1.Append(C2d);
}
else
{ ////
slineS1.Append(H1);
}
//
if (myApprox2)
{
occ::handle<Geom2d_Curve> C2d;
BuildPCurves(fprm, lprm, Tolpc, myHS2->Surface(), newc, C2d);
if (Tolpc > myTolReached2d || myTolReached2d == 0)
{
myTolReached2d = Tolpc;
}
slineS2.Append(C2d);
}
else
{
slineS2.Append(H1);
}
//==============================================
} // if (std::abs(fprm) > RealEpsilon() || std::abs(lprm-2.*M_PI) > RealEpsilon())
//
else
{ // on regarde si on garde
//
if (aNbParts == 1)
{
if (std::abs(fprm) < RealEpsilon() && std::abs(lprm - 2. * M_PI) < RealEpsilon())
{
occ::handle<Geom_TrimmedCurve> aTC3D = new Geom_TrimmedCurve(newc, fprm, lprm);
//
sline.Append(aTC3D);
fprm = aTC3D->FirstParameter();
lprm = aTC3D->LastParameter();
if (myApprox1)
{
occ::handle<Geom2d_Curve> C2d;
BuildPCurves(fprm, lprm, Tolpc, myHS1->Surface(), newc, C2d);
if (Tolpc > myTolReached2d || myTolReached2d == 0)
{
myTolReached2d = Tolpc;
}
slineS1.Append(C2d);
}
else
{ ////
slineS1.Append(H1);
}
if (myApprox2)
{
occ::handle<Geom2d_Curve> C2d;
BuildPCurves(fprm, lprm, Tolpc, myHS2->Surface(), newc, C2d);
if (Tolpc > myTolReached2d || myTolReached2d == 0)
{
myTolReached2d = Tolpc;
}
slineS2.Append(C2d);
}
else
{
slineS2.Append(H1);
}
break;
}
}
//
double aTwoPIdiv17, u1, v1, u2, v2, TolX;
//
aTwoPIdiv17 = 2. * M_PI / 17.;
//
for (j = 0; j <= 17; j++)
{
gp_Pnt ptref(newc->Value(j * aTwoPIdiv17));
TolX = Precision::Confusion();
Parameters(myHS1, myHS2, ptref, u1, v1, u2, v2);
ok = (dom1->Classify(gp_Pnt2d(u1, v1), TolX) != TopAbs_OUT);
if (ok)
{
ok = (dom2->Classify(gp_Pnt2d(u2, v2), TolX) != TopAbs_OUT);
}
if (ok)
{
sline.Append(newc);
//==============================================
if (myApprox1)
{
occ::handle<Geom2d_Curve> C2d;
BuildPCurves(fprm, lprm, Tolpc, myHS1->Surface(), newc, C2d);
if (Tolpc > myTolReached2d || myTolReached2d == 0)
{
myTolReached2d = Tolpc;
}
slineS1.Append(C2d);
}
else
{
slineS1.Append(H1);
}
if (myApprox2)
{
occ::handle<Geom2d_Curve> C2d;
BuildPCurves(fprm, lprm, Tolpc, myHS2->Surface(), newc, C2d);
if (Tolpc > myTolReached2d || myTolReached2d == 0)
{
myTolReached2d = Tolpc;
}
slineS2.Append(C2d);
}
else
{
slineS2.Append(H1);
}
break;
} // end of if (ok) {
} // end of for (int j=0; j<=17; j++)
} // end of else { on regarde si on garde
} // for (i=1; i<=myLConstruct.NbParts(); i++)
} // IntPatch_Circle: IntPatch_Ellipse
break;
// ########################################
// Analytic
// ########################################
case IntPatch_Analytic:
// This case was processed earlier (in IntPatch_Intersection)
break;
// ########################################
// Walking
// ########################################
case IntPatch_Walking: {
occ::handle<IntPatch_WLine> WL = occ::down_cast<IntPatch_WLine>(L);
#ifdef GEOMINT_INTSS_DEBUG
WL->Dump(0);
#endif
//
int ifprm, ilprm;
//
if (!myApprox)
{
aNbParts = myLConstruct.NbParts();
for (i = 1; i <= aNbParts; i++)
{
myLConstruct.Part(i, fprm, lprm);
ifprm = (int)fprm;
ilprm = (int)lprm;
//
occ::handle<Geom2d_BSplineCurve> aH1, aH2;
if (myApprox1)
{
aH1 = MakeBSpline2d(WL, ifprm, ilprm, true);
}
if (myApprox2)
{
aH2 = MakeBSpline2d(WL, ifprm, ilprm, false);
}
//
occ::handle<Geom_Curve> aBSp = MakeBSpline(WL, ifprm, ilprm);
//
sline.Append(aBSp);
slineS1.Append(aH1);
slineS2.Append(aH2);
}
}
//
else
{
bool bIsDecomposited;
int nbiter, aNbSeqOfL;
GeomInt_WLApprox theapp3d;
NCollection_Sequence<occ::handle<IntPatch_Line>> aSeqOfL;
double tol2d, aTolSS;
//
tol2d = myTolApprox;
aTolSS = 2.e-7;
theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, 30, myHS1 != myHS2);
//
bIsDecomposited =
GeomInt_LineTool::DecompositionOfWLine(WL, myHS1, myHS2, aTolSS, myLConstruct, aSeqOfL);
//
aNbParts = myLConstruct.NbParts();
aNbSeqOfL = aSeqOfL.Length();
//
nbiter = (bIsDecomposited) ? aNbSeqOfL : aNbParts;
//
for (i = 1; i <= nbiter; i++)
{
if (bIsDecomposited)
{
WL = occ::down_cast<IntPatch_WLine>(aSeqOfL.Value(i));
ifprm = 1;
ilprm = WL->NbPnts();
}
else
{
myLConstruct.Part(i, fprm, lprm);
ifprm = (int)fprm;
ilprm = (int)lprm;
}
bool anApprox = myApprox;
bool anApprox1 = myApprox1;
bool anApprox2 = myApprox2;
GeomAbs_SurfaceType typs1, typs2;
typs1 = myHS1->GetType();
typs2 = myHS2->GetType();
if (typs1 == GeomAbs_Plane)
{
anApprox = false;
anApprox1 = true;
}
else if (typs2 == GeomAbs_Plane)
{
anApprox = false;
anApprox2 = true;
}
Approx_ParametrizationType aParType =
ApproxInt_KnotTools::DefineParType(WL, ifprm, ilprm, anApprox, anApprox1, anApprox2);
theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, 30, myHS1 != myHS2, aParType);
//-- lbr :
//-- Si une des surfaces est un plan , on approxime en 2d
//-- sur cette surface et on remonte les points 2d en 3d.
//
if (typs1 == GeomAbs_Plane)
{
theapp3d.Perform(myHS1, myHS2, WL, false, true, myApprox2, ifprm, ilprm);
}
else if (typs2 == GeomAbs_Plane)
{
theapp3d.Perform(myHS1, myHS2, WL, false, myApprox1, true, ifprm, ilprm);
}
else
{
//
if (myHS1 != myHS2)
{
if ((typs1 == GeomAbs_BezierSurface || typs1 == GeomAbs_BSplineSurface)
&& (typs2 == GeomAbs_BezierSurface || typs2 == GeomAbs_BSplineSurface))
{
theapp3d.SetParameters(myTolApprox, tol2d, 4, 8, 0, 30, true, aParType);
}
}
//
theapp3d.Perform(myHS1, myHS2, WL, true, myApprox1, myApprox2, ifprm, ilprm);
}
if (!theapp3d.IsDone())
{
//
occ::handle<Geom2d_BSplineCurve> aH1, aH2;
//
occ::handle<Geom_Curve> aBSp = MakeBSpline(WL, ifprm, ilprm);
if (myApprox1)
{
aH1 = MakeBSpline2d(WL, ifprm, ilprm, true);
}
if (myApprox2)
{
aH2 = MakeBSpline2d(WL, ifprm, ilprm, false);
}
//
sline.Append(aBSp);
slineS1.Append(aH1);
slineS2.Append(aH2);
} // if (!theapp3d.IsDone())
else
{
if (myApprox1 || myApprox2 || (typs1 == GeomAbs_Plane || typs2 == GeomAbs_Plane))
{
if (theapp3d.TolReached2d() > myTolReached2d || myTolReached2d == 0.)
{
myTolReached2d = theapp3d.TolReached2d();
}
}
if (typs1 == GeomAbs_Plane || typs2 == GeomAbs_Plane)
{
myTolReached3d = myTolReached2d;
}
else if (theapp3d.TolReached3d() > myTolReached3d || myTolReached3d == 0.)
{
myTolReached3d = theapp3d.TolReached3d();
}
int aNbMultiCurves, nbpoles;
//
aNbMultiCurves = theapp3d.NbMultiCurves();
for (j = 1; j <= aNbMultiCurves; j++)
{
if (typs1 == GeomAbs_Plane)
{
const AppParCurves_MultiBSpCurve& mbspc = theapp3d.Value(j);
nbpoles = mbspc.NbPoles();
NCollection_Array1<gp_Pnt2d> tpoles2d(1, nbpoles);
NCollection_Array1<gp_Pnt> tpoles(1, nbpoles);
mbspc.Curve(1, tpoles2d);
const gp_Pln& Pln = myHS1->Plane();
//
int ik;
for (ik = 1; ik <= nbpoles; ik++)
{
tpoles.SetValue(
ik,
ElSLib::Value(tpoles2d.Value(ik).X(), tpoles2d.Value(ik).Y(), Pln));
}
//
occ::handle<Geom_BSplineCurve> BS = new Geom_BSplineCurve(tpoles,
mbspc.Knots(),
mbspc.Multiplicities(),
mbspc.Degree());
GeomLib_CheckBSplineCurve Check(BS, myTolCheck, myTolAngCheck);
Check.FixTangent(true, true);
//
sline.Append(BS);
//
if (myApprox1)
{
occ::handle<Geom2d_BSplineCurve> BS1 =
new Geom2d_BSplineCurve(tpoles2d,
mbspc.Knots(),
mbspc.Multiplicities(),
mbspc.Degree());
GeomLib_Check2dBSplineCurve Check1(BS1, myTolCheck, myTolAngCheck);
Check1.FixTangent(true, true);
//
AdjustUPeriodic(aS1, BS1);
//
slineS1.Append(BS1);
}
else
{
slineS1.Append(H1);
}
if (myApprox2)
{
mbspc.Curve(2, tpoles2d);
occ::handle<Geom2d_BSplineCurve> BS2 =
new Geom2d_BSplineCurve(tpoles2d,
mbspc.Knots(),
mbspc.Multiplicities(),
mbspc.Degree());
GeomLib_Check2dBSplineCurve newCheck(BS2, myTolCheck, myTolAngCheck);
newCheck.FixTangent(true, true);
//
AdjustUPeriodic(aS2, BS2);
//
slineS2.Append(BS2);
}
else
{
slineS2.Append(H1);
}
} // if(typs1 == GeomAbs_Plane)
//
else if (typs2 == GeomAbs_Plane)
{
const AppParCurves_MultiBSpCurve& mbspc = theapp3d.Value(j);
nbpoles = mbspc.NbPoles();
NCollection_Array1<gp_Pnt2d> tpoles2d(1, nbpoles);
NCollection_Array1<gp_Pnt> tpoles(1, nbpoles);
mbspc.Curve((myApprox1) ? 2 : 1, tpoles2d);
const gp_Pln& Pln = myHS2->Plane();
//
int ik;
for (ik = 1; ik <= nbpoles; ik++)
{
tpoles.SetValue(
ik,
ElSLib::Value(tpoles2d.Value(ik).X(), tpoles2d.Value(ik).Y(), Pln));
}
//
occ::handle<Geom_BSplineCurve> BS = new Geom_BSplineCurve(tpoles,
mbspc.Knots(),
mbspc.Multiplicities(),
mbspc.Degree());
GeomLib_CheckBSplineCurve Check(BS, myTolCheck, myTolAngCheck);
Check.FixTangent(true, true);
//
sline.Append(BS);
//
if (myApprox2)
{
occ::handle<Geom2d_BSplineCurve> BS1 =
new Geom2d_BSplineCurve(tpoles2d,
mbspc.Knots(),
mbspc.Multiplicities(),
mbspc.Degree());
GeomLib_Check2dBSplineCurve Check1(BS1, myTolCheck, myTolAngCheck);
Check1.FixTangent(true, true);
//
//
AdjustUPeriodic(aS2, BS1);
//
slineS2.Append(BS1);
}
else
{
slineS2.Append(H1);
}
if (myApprox1)
{
mbspc.Curve(1, tpoles2d);
occ::handle<Geom2d_BSplineCurve> BS2 =
new Geom2d_BSplineCurve(tpoles2d,
mbspc.Knots(),
mbspc.Multiplicities(),
mbspc.Degree());
GeomLib_Check2dBSplineCurve Check2(BS2, myTolCheck, myTolAngCheck);
Check2.FixTangent(true, true);
//
//
AdjustUPeriodic(aS1, BS2);
//
slineS1.Append(BS2);
}
else
{
slineS1.Append(H1);
}
} // else if(typs2 == GeomAbs_Plane)
//
else
{ // typs1!=GeomAbs_Plane && typs2!=GeomAbs_Plane
const AppParCurves_MultiBSpCurve& mbspc = theapp3d.Value(j);
nbpoles = mbspc.NbPoles();
NCollection_Array1<gp_Pnt> tpoles(1, nbpoles);
mbspc.Curve(1, tpoles);
occ::handle<Geom_BSplineCurve> BS = new Geom_BSplineCurve(tpoles,
mbspc.Knots(),
mbspc.Multiplicities(),
mbspc.Degree());
GeomLib_CheckBSplineCurve Check(BS, myTolCheck, myTolAngCheck);
Check.FixTangent(true, true);
//
// Check IsClosed()
double aDist = std::max(BS->StartPoint().XYZ().SquareModulus(),
BS->EndPoint().XYZ().SquareModulus());
double eps = Epsilon(aDist);
if (BS->StartPoint().SquareDistance(BS->EndPoint()) < 2. * eps)
{
// Avoid creating B-splines containing two coincident poles only
if (mbspc.Degree() == 1 && nbpoles == 2)
{
continue;
}
if (!BS->IsClosed() && !BS->IsPeriodic())
{
// force Closed()
gp_Pnt aPm((BS->Pole(1).XYZ() + BS->Pole(BS->NbPoles()).XYZ()) / 2.);
BS->SetPole(1, aPm);
BS->SetPole(BS->NbPoles(), aPm);
}
}
sline.Append(BS);
if (myApprox1)
{
NCollection_Array1<gp_Pnt2d> tpoles2d(1, nbpoles);
mbspc.Curve(2, tpoles2d);
occ::handle<Geom2d_BSplineCurve> BS1 =
new Geom2d_BSplineCurve(tpoles2d,
mbspc.Knots(),
mbspc.Multiplicities(),
mbspc.Degree());
GeomLib_Check2dBSplineCurve newCheck(BS1, myTolCheck, myTolAngCheck);
newCheck.FixTangent(true, true);
//
AdjustUPeriodic(aS1, BS1);
//
slineS1.Append(BS1);
}
else
{
slineS1.Append(H1);
}
if (myApprox2)
{
NCollection_Array1<gp_Pnt2d> tpoles2d(1, nbpoles);
mbspc.Curve((myApprox1) ? 3 : 2, tpoles2d);
occ::handle<Geom2d_BSplineCurve> BS2 =
new Geom2d_BSplineCurve(tpoles2d,
mbspc.Knots(),
mbspc.Multiplicities(),
mbspc.Degree());
GeomLib_Check2dBSplineCurve newCheck(BS2, myTolCheck, myTolAngCheck);
newCheck.FixTangent(true, true);
//
AdjustUPeriodic(aS2, BS2);
//
slineS2.Append(BS2);
}
else
{
slineS2.Append(H1);
}
} // else { // typs1!=GeomAbs_Plane && typs2!=GeomAbs_Plane
} // for (j=1; j<=aNbMultiCurves; j++
}
}
}
}
break;
case IntPatch_Restriction: {
occ::handle<IntPatch_RLine> RL = occ::down_cast<IntPatch_RLine>(L);
occ::handle<Geom_Curve> aC3d;
occ::handle<Geom2d_Curve> aC2d1, aC2d2;
double aTolReached;
TreatRLine(RL, myHS1, myHS2, aC3d, aC2d1, aC2d2, aTolReached);
if (aC3d.IsNull())
{
break;
}
Bnd_Box2d aBox1, aBox2;
const double aU1f = myHS1->FirstUParameter(), aV1f = myHS1->FirstVParameter(),
aU1l = myHS1->LastUParameter(), aV1l = myHS1->LastVParameter();
const double aU2f = myHS2->FirstUParameter(), aV2f = myHS2->FirstVParameter(),
aU2l = myHS2->LastUParameter(), aV2l = myHS2->LastVParameter();
aBox1.Add(gp_Pnt2d(aU1f, aV1f));
aBox1.Add(gp_Pnt2d(aU1l, aV1l));
aBox2.Add(gp_Pnt2d(aU2f, aV2f));
aBox2.Add(gp_Pnt2d(aU2l, aV2l));
NCollection_DynamicArray<double> anArrayOfParameters;
// We consider here that the intersection line is same-parameter-line
anArrayOfParameters.Append(aC3d->FirstParameter());
anArrayOfParameters.Append(aC3d->LastParameter());
TrimILineOnSurfBoundaries(aC2d1, aC2d2, aBox1, aBox2, anArrayOfParameters);
const int aNbIntersSolutionsm1 = anArrayOfParameters.Length() - 1;
// Trim RLine found.
for (int anInd = 0; anInd < aNbIntersSolutionsm1; anInd++)
{
const double aParF = anArrayOfParameters(anInd), aParL = anArrayOfParameters(anInd + 1);
if ((aParL - aParF) <= Precision::PConfusion())
{
continue;
}
const double aPar = 0.5 * (aParF + aParL);
gp_Pnt2d aPt;
occ::handle<Geom2d_Curve> aCurv2d1, aCurv2d2;
if (!aC2d1.IsNull())
{
aC2d1->D0(aPar, aPt);
if (aBox1.IsOut(aPt))
{
continue;
}
if (myApprox1)
{
aCurv2d1 = new Geom2d_TrimmedCurve(aC2d1, aParF, aParL);
}
}
if (!aC2d2.IsNull())
{
aC2d2->D0(aPar, aPt);
if (aBox2.IsOut(aPt))
{
continue;
}
if (myApprox2)
{
aCurv2d2 = new Geom2d_TrimmedCurve(aC2d2, aParF, aParL);
}
}
occ::handle<Geom_Curve> aCurv3d = new Geom_TrimmedCurve(aC3d, aParF, aParL);
sline.Append(aCurv3d);
slineS1.Append(aCurv2d1);
slineS2.Append(aCurv2d2);
}
}
break;
}
}
//=================================================================================================
void GeomInt_IntSS::TreatRLine(const occ::handle<IntPatch_RLine>& theRL,
const occ::handle<GeomAdaptor_Surface>& theHS1,
const occ::handle<GeomAdaptor_Surface>& theHS2,
occ::handle<Geom_Curve>& theC3d,
occ::handle<Geom2d_Curve>& theC2d1,
occ::handle<Geom2d_Curve>& theC2d2,
double& theTolReached)
{
occ::handle<GeomAdaptor_Surface> aGAHS;
occ::handle<Adaptor2d_Curve2d> anAHC2d;
double tf, tl;
// It is assumed that 2d curve is 2d line (rectangular surface domain)
if (theRL->IsArcOnS1())
{
aGAHS = theHS1;
anAHC2d = theRL->ArcOnS1();
theRL->ParamOnS1(tf, tl);
theC2d1 = Geom2dAdaptor::MakeCurve(*anAHC2d);
tf = std::max(tf, theC2d1->FirstParameter());
tl = std::min(tl, theC2d1->LastParameter());
theC2d1 = new Geom2d_TrimmedCurve(theC2d1, tf, tl);
}
else if (theRL->IsArcOnS2())
{
aGAHS = theHS2;
anAHC2d = theRL->ArcOnS2();
theRL->ParamOnS2(tf, tl);
theC2d2 = Geom2dAdaptor::MakeCurve(*anAHC2d);
tf = std::max(tf, theC2d2->FirstParameter());
tl = std::min(tl, theC2d2->LastParameter());
theC2d2 = new Geom2d_TrimmedCurve(theC2d2, tf, tl);
}
else
{
return;
}
// Restriction line can correspond to a degenerated edge.
// In this case we return null-curve.
if (isDegenerated(aGAHS, anAHC2d, tf, tl))
{
return;
}
//
// To provide sameparameter it is necessary to get 3d curve as
// approximation of curve on surface.
int aMaxDeg = 8;
int aMaxSeg = 1000;
Approx_CurveOnSurface anApp(anAHC2d, aGAHS, tf, tl, Precision::Confusion());
anApp.Perform(aMaxSeg, aMaxDeg, GeomAbs_C1, true, false);
if (!anApp.HasResult())
{
return;
}
theC3d = anApp.Curve3d();
theTolReached = anApp.MaxError3d();
double aTol = Precision::Confusion();
if (theRL->IsArcOnS1())
{
occ::handle<Geom_Surface> aS = GeomAdaptor::MakeSurface(*theHS2);
BuildPCurves(tf, tl, aTol, aS, theC3d, theC2d2);
}
if (theRL->IsArcOnS2())
{
occ::handle<Geom_Surface> aS = GeomAdaptor::MakeSurface(*theHS1);
BuildPCurves(tf, tl, aTol, aS, theC3d, theC2d1);
}
theTolReached = std::max(theTolReached, aTol);
}
//=================================================================================================
void GeomInt_IntSS::BuildPCurves(const double theFirst,
const double theLast,
const double theUmin,
const double theUmax,
const double theVmin,
const double theVmax,
double& theTol,
const occ::handle<Geom_Surface>& theSurface,
const occ::handle<Geom_Curve>& theCurve,
occ::handle<Geom2d_Curve>& theCurve2d)
{
if (!theCurve2d.IsNull() || theSurface.IsNull())
{
return;
}
//
// in class ProjLib_Function the range of parameters is shrank by 1.e-09
if ((theLast - theFirst) > 2.e-09)
{
theCurve2d = GeomProjLib::Curve2d(theCurve,
theFirst,
theLast,
theSurface,
theUmin,
theUmax,
theVmin,
theVmax,
theTol);
if (theCurve2d.IsNull())
{
// proj. a circle that goes through the pole on a sphere to the sphere
theTol += Precision::Confusion();
theCurve2d = GeomProjLib::Curve2d(theCurve, theFirst, theLast, theSurface, theTol);
}
const occ::handle<Standard_Type>& aType = theCurve2d->DynamicType();
if (aType == STANDARD_TYPE(Geom2d_BSplineCurve))
{
// Check first, last knots to avoid problems with trimming
// First, last knots can differ from f, l because of numerical error
// of projection and approximation
// The same checking as in Geom2d_TrimmedCurve
if ((theCurve2d->FirstParameter() - theFirst > Precision::PConfusion())
|| (theLast - theCurve2d->LastParameter() > Precision::PConfusion()))
{
occ::handle<Geom2d_BSplineCurve> aBspl = occ::down_cast<Geom2d_BSplineCurve>(theCurve2d);
NCollection_Array1<double> aKnots(aBspl->Knots());
BSplCLib::Reparametrize(theFirst, theLast, aKnots);
aBspl->SetKnots(aKnots);
}
}
}
else
{
if ((theLast - theFirst) > Epsilon(std::abs(theFirst)))
{
// The domain of C2d is [Epsilon(std::abs(f)), 2.e-09]
// On this small range C2d can be considered as segment
// of line.
double aU = 0., aV = 0.;
GeomAdaptor_Surface anAS;
anAS.Load(theSurface);
Extrema_ExtPS anExtr;
const gp_Pnt aP3d1 = theCurve->Value(theFirst);
const gp_Pnt aP3d2 = theCurve->Value(theLast);
anExtr.SetAlgo(Extrema_ExtAlgo_Grad);
anExtr.Initialize(anAS,
theUmin,
theUmax,
theVmin,
theVmax,
Precision::Confusion(),
Precision::Confusion());
anExtr.Perform(aP3d1);
if (ParametersOfNearestPointOnSurface(anExtr, aU, aV))
{
const gp_Pnt2d aP2d1(aU, aV);
anExtr.Perform(aP3d2);
if (ParametersOfNearestPointOnSurface(anExtr, aU, aV))
{
const gp_Pnt2d aP2d2(aU, aV);
if (aP2d1.Distance(aP2d2) > gp::Resolution())
{
NCollection_Array1<gp_Pnt2d> poles(1, 2);
NCollection_Array1<double> knots(1, 2);
NCollection_Array1<int> mults(1, 2);
poles(1) = aP2d1;
poles(2) = aP2d2;
knots(1) = theFirst;
knots(2) = theLast;
mults(1) = mults(2) = 2;
theCurve2d = new Geom2d_BSplineCurve(poles, knots, mults, 1);
// Check same parameter in middle point .begin
const gp_Pnt PMid(theCurve->Value(0.5 * (theFirst + theLast)));
const gp_Pnt2d pmidcurve2d(0.5 * (aP2d1.XY() + aP2d2.XY()));
const gp_Pnt aPC(anAS.Value(pmidcurve2d.X(), pmidcurve2d.Y()));
const double aDist = PMid.Distance(aPC);
theTol = std::max(aDist, theTol);
// Check same parameter in middle point .end
}
}
}
}
}
//
if (theSurface->IsUPeriodic() && !theCurve2d.IsNull())
{
// Recadre dans le domaine UV de la face
double aTm, U0, aEps, period, du, U0x;
bool bAdjust;
//
aEps = Precision::PConfusion();
period = theSurface->UPeriod();
//
aTm = .5 * (theFirst + theLast);
gp_Pnt2d pm = theCurve2d->Value(aTm);
U0 = pm.X();
//
bAdjust = GeomInt::AdjustPeriodic(U0, theUmin, theUmax, period, U0x, du, aEps);
if (bAdjust)
{
gp_Vec2d T1(du, 0.);
theCurve2d->Translate(T1);
}
}
}
//=================================================================================================
void GeomInt_IntSS::BuildPCurves(const double f,
const double l,
double& Tol,
const occ::handle<Geom_Surface>& S,
const occ::handle<Geom_Curve>& C,
occ::handle<Geom2d_Curve>& C2d)
{
if (!C2d.IsNull() || S.IsNull())
{
return;
}
//
double umin, umax, vmin, vmax;
//
S->Bounds(umin, umax, vmin, vmax);
BuildPCurves(f, l, umin, umax, vmin, vmax, Tol, S, C, C2d);
}
//=======================================================================
// function : TrimILineOnSurfBoundaries
// purpose : This function finds intersection points of given curves with
// surface boundaries and fills theArrayOfParameters by parameters
// along the given curves corresponding of these points.
//=======================================================================
void GeomInt_IntSS::TrimILineOnSurfBoundaries(
const occ::handle<Geom2d_Curve>& theC2d1,
const occ::handle<Geom2d_Curve>& theC2d2,
const Bnd_Box2d& theBound1,
const Bnd_Box2d& theBound2,
NCollection_DynamicArray<double>& theArrayOfParameters)
{
// Rectangular boundaries of two surfaces: [0]:U=Ufirst, [1]:U=Ulast,
// [2]:V=Vfirst, [3]:V=Vlast
const int aNumberOfCurves = 4;
occ::handle<Geom2d_Curve> aCurS1Bounds[aNumberOfCurves];
occ::handle<Geom2d_Curve> aCurS2Bounds[aNumberOfCurves];
double aU1f = 0.0, aV1f = 0.0, aU1l = 0.0, aV1l = 0.0;
double aU2f = 0.0, aV2f = 0.0, aU2l = 0.0, aV2l = 0.0;
theBound1.Get(aU1f, aV1f, aU1l, aV1l);
theBound2.Get(aU2f, aV2f, aU2l, aV2l);
double aDelta = aV1l - aV1f;
if (std::abs(aDelta) > RealSmall())
{
if (!Precision::IsInfinite(aU1f))
{
aCurS1Bounds[0] = new Geom2d_Line(gp_Pnt2d(aU1f, aV1f), gp_Dir2d(gp_Dir2d::D::Y));
if (!Precision::IsInfinite(aDelta))
{
aCurS1Bounds[0] = new Geom2d_TrimmedCurve(aCurS1Bounds[0], 0, aDelta);
}
}
if (!Precision::IsInfinite(aU1l))
{
aCurS1Bounds[1] = new Geom2d_Line(gp_Pnt2d(aU1l, aV1f), gp_Dir2d(gp_Dir2d::D::Y));
if (!Precision::IsInfinite(aDelta))
{
aCurS1Bounds[1] = new Geom2d_TrimmedCurve(aCurS1Bounds[1], 0, aDelta);
}
}
}
aDelta = aU1l - aU1f;
if (std::abs(aDelta) > RealSmall())
{
if (!Precision::IsInfinite(aV1f))
{
aCurS1Bounds[2] = new Geom2d_Line(gp_Pnt2d(aU1f, aV1f), gp_Dir2d(gp_Dir2d::D::X));
if (!Precision::IsInfinite(aDelta))
{
aCurS1Bounds[2] = new Geom2d_TrimmedCurve(aCurS1Bounds[2], 0, aDelta);
}
}
if (!Precision::IsInfinite(aV1l))
{
aCurS1Bounds[3] = new Geom2d_Line(gp_Pnt2d(aU1f, aV1l), gp_Dir2d(gp_Dir2d::D::X));
if (!Precision::IsInfinite(aDelta))
{
aCurS1Bounds[3] = new Geom2d_TrimmedCurve(aCurS1Bounds[3], 0, aDelta);
}
}
}
aDelta = aV2l - aV2f;
if (std::abs(aDelta) > RealSmall())
{
if (!Precision::IsInfinite(aU2f))
{
aCurS2Bounds[0] = new Geom2d_Line(gp_Pnt2d(aU2f, aV2f), gp_Dir2d(gp_Dir2d::D::Y));
if (!Precision::IsInfinite(aDelta))
{
aCurS2Bounds[0] = new Geom2d_TrimmedCurve(aCurS2Bounds[0], 0, aDelta);
}
}
if (!Precision::IsInfinite(aU2l))
{
aCurS2Bounds[1] = new Geom2d_Line(gp_Pnt2d(aU2l, aV2f), gp_Dir2d(gp_Dir2d::D::Y));
if (!Precision::IsInfinite(aDelta))
{
aCurS2Bounds[1] = new Geom2d_TrimmedCurve(aCurS2Bounds[1], 0, aDelta);
}
}
}
aDelta = aU2l - aU2f;
if (std::abs(aDelta) > RealSmall())
{
if (!Precision::IsInfinite(aV2f))
{
aCurS2Bounds[2] = new Geom2d_Line(gp_Pnt2d(aU2f, aV2f), gp_Dir2d(gp_Dir2d::D::X));
if (!Precision::IsInfinite(aDelta))
{
aCurS2Bounds[2] = new Geom2d_TrimmedCurve(aCurS2Bounds[2], 0, aDelta);
}
}
if (!Precision::IsInfinite(aV2l))
{
aCurS2Bounds[3] = new Geom2d_Line(gp_Pnt2d(aU2f, aV2l), gp_Dir2d(gp_Dir2d::D::X));
if (!Precision::IsInfinite(aDelta))
{
aCurS2Bounds[3] = new Geom2d_TrimmedCurve(aCurS2Bounds[3], 0, aDelta);
}
}
}
constexpr double anIntTol = 10.0 * Precision::Confusion();
IntersectCurveAndBoundary(theC2d1, aCurS1Bounds, aNumberOfCurves, anIntTol, theArrayOfParameters);
IntersectCurveAndBoundary(theC2d2, aCurS2Bounds, aNumberOfCurves, anIntTol, theArrayOfParameters);
std::sort(theArrayOfParameters.begin(), theArrayOfParameters.end());
}
//=================================================================================================
occ::handle<Geom_Curve> GeomInt_IntSS::MakeBSpline(const occ::handle<IntPatch_WLine>& WL,
const int ideb,
const int ifin)
{
const int nbpnt = ifin - ideb + 1;
NCollection_Array1<gp_Pnt> poles(1, nbpnt);
NCollection_Array1<double> knots(1, nbpnt);
NCollection_Array1<int> mults(1, nbpnt);
int i = 1, ipidebm1 = ideb;
for (; i <= nbpnt; ipidebm1++, i++)
{
poles(i) = WL->Point(ipidebm1).Value();
mults(i) = 1;
knots(i) = i - 1;
}
mults(1) = mults(nbpnt) = 2;
return new Geom_BSplineCurve(poles, knots, mults, 1);
}
//=================================================================================================
occ::handle<Geom2d_BSplineCurve> GeomInt_IntSS::MakeBSpline2d(
const occ::handle<IntPatch_WLine>& theWLine,
const int ideb,
const int ifin,
const bool onFirst)
{
const int nbpnt = ifin - ideb + 1;
NCollection_Array1<gp_Pnt2d> poles(1, nbpnt);
NCollection_Array1<double> knots(1, nbpnt);
NCollection_Array1<int> mults(1, nbpnt);
int i = 1, ipidebm1 = ideb;
for (; i <= nbpnt; ipidebm1++, i++)
{
double U, V;
if (onFirst)
{
theWLine->Point(ipidebm1).ParametersOnS1(U, V);
}
else
{
theWLine->Point(ipidebm1).ParametersOnS2(U, V);
}
poles(i).SetCoord(U, V);
mults(i) = 1;
knots(i) = i - 1;
}
mults(1) = mults(nbpnt) = 2;
return new Geom2d_BSplineCurve(poles, knots, mults, 1);
}
b8f597c67This file is pinned to the selected release. Download the original to open it in your design tool.