OCCT

// Created on: 1995-05-30
// Created by: Stagiaire Flore Lantheaume
// Copyright (c) 1995-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#include <Adaptor3d_Surface.hxx>
#include <ChFiDS_Spine.hxx>
#include <ChFiDS_SurfData.hxx>
#include <ChFiKPart_ComputeData.hxx>
#include <ChFiKPart_ComputeData_ChAsymPlnCon.hxx>
#include <ChFiKPart_ComputeData_Fcts.hxx>
#include <ElCLib.hxx>
#include <ElSLib.hxx>
#include <gp_Ax3.hxx>
#include <gp_Circ.hxx>
#include <gp_Dir.hxx>
#include <gp_Pnt.hxx>
#include <gp_Vec.hxx>
#include <Precision.hxx>
#include <TopOpeBRepDS_DataStructure.hxx>

//=======================================================================
// function : MakeChamfer
// purpose  : Compute the chamfer in the particular case Plane/Cone or
//           Cylinder/Plane
//           Compute the SurfData <Data> of the chamfer build on the <Spine>
//           between the plane <Pln> and the cone <Con>, with the
//           distances <Dis1> on <Pln> and <Dis2> on <Con>.
//           <Or1> and <Or2> are the orientations of <Pln> and <Con>
//           and <Ofpl> this of the face carried by <Pln>.
//           <First> is the start point on the <Spine>
//           <Plandab> is equal to True if the plane is the surface S1
//           <fu> and <lu> are the first and last u parameters of the
//           cone
// out      : True if the chanfer has been computed
//           False else
//=======================================================================
bool ChFiKPart_MakeChamfer(TopOpeBRepDS_DataStructure&         DStr,
                           const occ::handle<ChFiDS_SurfData>& Data,
                           const ChFiDS_ChamfMode              theMode,
                           const gp_Pln&                       Pln,
                           const gp_Cone&                      Con,
                           const double                        fu,
                           const double                        lu,
                           const TopAbs_Orientation            Or1,
                           const TopAbs_Orientation            Or2,
                           const double                        theDis1,
                           const double                        theDis2,
                           const gp_Circ&                      Spine,
                           const double                        First,
                           const TopAbs_Orientation            Ofpl,
                           const bool                          plandab)
{

  double angcon = Con.SemiAngle();

  double Dis1 = theDis1, Dis2 = theDis2;
  double Alpha        = M_PI / 2 - angcon;
  double CosHalfAlpha = std::cos(Alpha / 2);
  if (theMode == ChFiDS_ConstThroatChamfer)
  {
    Dis1 = Dis2 = theDis1 / CosHalfAlpha;
  }
  else if (theMode == ChFiDS_ConstThroatWithPenetrationChamfer)
  {
    double aDis1    = std::min(theDis1, theDis2);
    double aDis2    = std::max(theDis1, theDis2);
    double dis1dis1 = aDis1 * aDis1, dis2dis2 = aDis2 * aDis2;
    double SinAlpha   = std::sin(Alpha);
    double CosAlpha   = std::cos(Alpha);
    double CotanAlpha = CosAlpha / SinAlpha;
    Dis1              = sqrt(dis2dis2 - dis1dis1) - aDis1 * CotanAlpha;
    double CosBeta    = sqrt(1 - dis1dis1 / dis2dis2) * CosAlpha + aDis1 / aDis2 * SinAlpha;
    double FullDist1  = aDis2 / CosBeta;
    Dis2              = FullDist1 - aDis1 / SinAlpha;
  }

  double sincon = std::abs(std::sin(angcon));
  double angle;
  bool   IsResol;

  gp_Ax3 PosPl = Pln.Position();
  gp_Dir Dpl   = PosPl.XDirection().Crossed(PosPl.YDirection());
  if (Or1 == TopAbs_REVERSED)
  {
    Dpl.Reverse();
  }

  // compute the origin of the conical chamfer PtPl
  gp_Pnt Or = Con.Location();
  double u, v;
  ElSLib::PlaneParameters(PosPl, Or, u, v);
#ifdef OCCT_DEBUG
  gp_Pnt2d pt2dPln(u, v);
#endif
  ElSLib::PlaneD0(u, v, PosPl, Or);

  gp_Pnt PtSp;
  gp_Vec DSp;
  ElCLib::D1(First, Spine, PtSp, DSp);
#ifdef OCCT_DEBUG
  gp_Dir Dx(gp_Vec(Or, PtSp));
#endif
  // compute the normal to the cone in PtSp
  gp_Vec deru, derv;
  gp_Pnt PtCon;
  ElSLib::Parameters(Con, PtSp, u, v);
  ElSLib::D1(u, v, Con, PtCon, deru, derv);
  gp_Dir Dcon(deru.Crossed(derv));
  if (Or2 == TopAbs_REVERSED)
  {
    Dcon.Reverse();
  }

  bool ouvert = (Dpl.Dot(Dcon) >= 0.);

  if (!ouvert)
  {
    if (std::abs(Dis1 - Dis2 * sincon) > Precision::Confusion())
    {
      double abscos = std::abs(Dis2 - Dis1 * sincon);
      angle         = std::atan((Dis1 * std::cos(angcon)) / abscos);
    }
    else
    {
      angle = angcon;
    }
  }
  else
  {
    angle = std::atan((Dis1 * std::cos(angcon)) / (Dis2 + Dis1 * sincon));
  }

  bool DisOnP = false;

  IsResol = ChFiKPart_MakeChAsym(DStr,
                                 Data,
                                 Pln,
                                 Con,
                                 fu,
                                 lu,
                                 Or1,
                                 Or2,
                                 Dis2,
                                 angle,
                                 Spine,
                                 First,
                                 Ofpl,
                                 plandab,
                                 DisOnP);

  return IsResol;
}

/*
 // Compute the chamfer surface(cone)
  gp_Ax3 PosPl = Pln.Position();
  gp_Dir Dpl = PosPl.XDirection().Crossed(PosPl.YDirection());
  gp_Dir norf = Dpl;
  if (Ofpl == TopAbs_REVERSED ) norf.Reverse();
  if ( Or1 == TopAbs_REVERSED ) Dpl.Reverse();

    // compute the origin of the conical chamfer PtPl
  gp_Pnt Or = Con.Location();
  double u,v;
  ElSLib::PlaneParameters(PosPl,Or,u,v);
  gp_Pnt2d pt2dPln(u,v);
  ElSLib::PlaneD0(u,v,PosPl,Or);
  gp_Pnt PtPl = Or;

  gp_Pnt PtSp;
  gp_Vec DSp;
  ElCLib::D1(First,Spine,PtSp,DSp);
  gp_Dir Dx(gp_Vec(PtPl,PtSp));

    //compute the normal to the cone in PtSp
  gp_Vec deru,derv;
  gp_Pnt PtCon;
  ElSLib::Parameters(Con,PtSp,u,v);
  ElSLib::D1(u,v,Con,PtCon ,deru,derv);
  gp_Dir Dcon( deru.Crossed(derv) );
  if ( Or2 == TopAbs_REVERSED ) Dcon.Reverse();

  bool dedans = ( Dx.Dot(Dcon) <= 0.);
  bool ouvert = ( Dpl.Dot(Dcon) >= 0.);

    // variables used to compute the semiangle of the chamfer
  double angle = Con.SemiAngle();
  double move = Dis2 * std::cos(angle);
  Or.SetCoord( Or.X()+ move*Dpl.X(),
           Or.Y()+ move*Dpl.Y(),
           Or.Z()+ move*Dpl.Z());

  gp_Dir Vec1(Or.X()-PtPl.X(), Or.Y()-PtPl.Y(), Or.Z()-PtPl.Z());
  double Dis;
  if (ouvert)
    Dis = Dis1 + Dis2*std::abs(std::sin(angle));
  else
    Dis = Dis1 - Dis2*std::abs(std::sin(angle));

  gp_Pnt Pt(Or.X()+Dis*PosPl.XDirection().X(),
        Or.Y()+Dis*PosPl.XDirection().Y(),
        Or.Z()+Dis*PosPl.XDirection().Z());
  gp_Dir Vec2( Pt.X()-PtPl.X(), Pt.Y()-PtPl.Y(), Pt.Z()-PtPl.Z());

    // compute the parameters of the conical chamfer
  double ChamfRad,SemiAngl;
  bool pointu = false;

  if (dedans) {
    ChamfRad = Spine.Radius() - Dis1;
    if ( std::abs(ChamfRad)<=Precision::Confusion() ) pointu = true;
    if( ChamfRad < 0 ) {
#ifdef OCCT_DEBUG
      std::cout<<"le chanfrein ne passe pas"<<std::endl;
#endif
      return false;
    }
  }
  else {
    ChamfRad = Spine.Radius() + Dis1;
    gp_Dir Dplr = Dpl.Reversed();
    Dpl = Dplr;
  }

  gp_Ax3 ChamfAx3(PtPl,Dpl,Dx);
  SemiAngl = Vec1.Angle(Vec2);

  Handle (Geom_ConicalSurface)
    gcon = new Geom_ConicalSurface( ChamfAx3, SemiAngl, ChamfRad );

    // changes due to the fact the parameters of the chamfer must go increasing
    // from surface S1 to surface S2
  if ( (dedans && !plandab) || (!dedans && plandab) ) {
    gcon->VReverse();// be careful : the SemiAngle was changed
    ChamfAx3 = gcon->Position();
    SemiAngl = gcon->SemiAngle();
  }

    // changes due to the fact we have reversed the V direction of
    // parametrization
  if (ChamfAx3.YDirection().Dot(DSp) <= 0.) {
    ChamfAx3.YReverse();
    gcon->SetPosition(ChamfAx3);
  }

  Data->ChangeSurf(ChFiKPart_IndexSurfaceInDS(gcon,DStr));

  //compute the chamfer's orientation according to the orientation
  // of the faces

    //search the normal to the conical chamfer
  gp_Pnt P;
  u=0.;
  if (plandab)
    v = sqrt(Dis*Dis + move*move);
  else
    v = - sqrt(Dis*Dis + move*move);
  ElSLib::ConeD1(u,v,ChamfAx3,ChamfRad,SemiAngl,P,deru,derv);
  gp_Dir norchamf(deru.Crossed(derv));

  bool toreverse = (norf.Dot(norchamf)<= 0.);

  if (toreverse)
    Data->ChangeOrientation() = TopAbs_REVERSED;
  else
    Data->ChangeOrientation() = TopAbs_FORWARD;

  //we load the faceInterference with the pcurves and
  // the 3d curves

    // Case of the plane face
    // NB: in the case 'pointu', no pcurve on the plane surface
    // and no intersection plane-chamfer are needed

    // intersection plane-chamfer
  occ::handle<Geom_Circle> GCirPln;
  occ::handle<Geom2d_Circle> GCir2dPln;
  gp_Ax2 CirAx2 = ChamfAx3.Ax2();
  CirAx2.SetLocation(PtPl);

  if (!pointu) {
    Pt.SetCoord(PtPl.X()+ChamfRad*Dx.X(),
        PtPl.Y()+ChamfRad*Dx.Y(),
        PtPl.Z()+ChamfRad*Dx.Z());
    gp_Circ CirPln(CirAx2,ChamfRad);
    GCirPln = new Geom_Circle(CirPln);

      //pcurve on the plane
    ElSLib::PlaneParameters(PosPl,Pt ,u,v);
    gp_Pnt2d p2dPln(u,v);
    gp_Dir2d d2d(DSp.Dot(PosPl.XDirection()),DSp.Dot(PosPl.YDirection()));
    gp_Ax22d ax2dPln(pt2dPln, gp_Dir2d(gp_Vec2d(pt2dPln,p2dPln)),d2d);
    gp_Circ2d cir2dPln(ax2dPln,ChamfRad);
    GCir2dPln = new Geom2d_Circle(cir2dPln);
  }

      //pcurve on chamfer
  gp_Pnt2d p2dch;
  p2dch.SetCoord(0.,0.);
  ElSLib::ConeD1(0.,0.,ChamfAx3,ChamfRad,SemiAngl,Pt,deru,derv);
  gp_Lin2d lin2dch(p2dch,gp::DX2d());
  occ::handle<Geom2d_Line> GLin2dCh1 = new Geom2d_Line(lin2dch);

      //orientation
  TopAbs_Orientation trans;
  gp_Dir norpl = PosPl.XDirection().Crossed(PosPl.YDirection());
  if (!pointu)
    norchamf.SetXYZ (deru.Crossed(derv).XYZ());
  toreverse = ( norchamf.Dot(norpl) <= 0. );
  if ((toreverse && plandab) || (!toreverse && !plandab)){
    trans = TopAbs_FORWARD;
  }
  else {
    trans = TopAbs_REVERSED;
  }

  if(plandab){
    Data->ChangeInterferenceOnS1().
      SetInterference(ChFiKPart_IndexCurveInDS(GCirPln,DStr),
              trans,GCir2dPln,GLin2dCh1);
  }
  else{
    Data->ChangeInterferenceOnS2().
      SetInterference(ChFiKPart_IndexCurveInDS(GCirPln,DStr),
              trans,GCir2dPln,GLin2dCh1);
  }

    // Case of the conical face

      //intersection cone-chamfer
  double Rad;
  if (dedans)
    Rad = ChamfRad + Dis;
  else
    Rad = ChamfRad - Dis;

  CirAx2.SetLocation(Or);
  gp_Circ CirCon(CirAx2, Rad);
  occ::handle<Geom_Circle> GCirCon = new Geom_Circle(CirCon);

      //pcurve on chamfer
  if (plandab)
    v = sqrt(Dis*Dis + move*move);
  else
    v = - sqrt(Dis*Dis + move*move);
  p2dch.SetCoord(0.,v);
  ElSLib::ConeD1(0.,v,ChamfAx3,ChamfRad,SemiAngl,Pt,deru,derv);
  lin2dch.SetLocation(p2dch);
  occ::handle<Geom2d_Line> GLin2dCh2 = new Geom2d_Line(lin2dch);

      //pcurve on cone
  norchamf.SetXYZ (deru.Crossed(derv).XYZ());

  Pt.SetCoord(Or.X()+Rad*Dx.X(),
          Or.Y()+Rad*Dx.Y(),
          Or.Z()+Rad*Dx.Z());
  ElSLib::Parameters(Con,Pt ,u,v);
  double tol = Precision::PConfusion();
  if(u >= 2*M_PI - tol && u <= 2*M_PI) u = 0.;
  if(u >= fu - tol && u < fu) u = fu;
  if(u <= lu + tol && u > lu) u = lu;
  if(u < fu || u > lu) u = ElCLib::InPeriod(u,fu,fu + 2*M_PI);
  ElSLib::D1(u,v,Con,Pt,deru,derv);
  gp_Pnt2d p2dCon(u,v);
  gp_Dir2d d2dCon;
  if ( deru.Dot(DSp)<=0. )
    d2dCon = - gp::DX2d();
  else
    d2dCon = gp::DX2d();
  gp_Lin2d lin2dCon(p2dCon,d2dCon);
  occ::handle<Geom2d_Line> GLin2dCon = new Geom2d_Line(lin2dCon);

      //orientation
  gp_Dir norcon = deru.Crossed(derv);
  toreverse = ( norchamf.Dot(norcon) <= 0. );
  if ((toreverse && plandab) || (!toreverse && !plandab) ) {
    trans = TopAbs_REVERSED;
  }
  else {
    trans = TopAbs_FORWARD;
  }

  if(plandab){
    Data->ChangeInterferenceOnS2().
      SetInterference(ChFiKPart_IndexCurveInDS(GCirCon,DStr),
              trans,GLin2dCon,GLin2dCh2);
  }
  else{
    Data->ChangeInterferenceOnS1().
      SetInterference(ChFiKPart_IndexCurveInDS(GCirCon,DStr),
              trans,GLin2dCon,GLin2dCh2);
  }

  return true;
}

*/