OCCT

// Created on: 1993-07-22
// Created by: Remi LEQUETTE
// Copyright (c) 1993-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#include <stdio.h>
#include <BRepTest.hxx>
#include <GeometryTest.hxx>

#include <DrawTrSurf.hxx>
#include <DBRep.hxx>
#include <Draw_Interpretor.hxx>
#include <Draw_Appli.hxx>

#include <BRepLib.hxx>
#include <BRepTools_Quilt.hxx>
#include <BRepAdaptor_Curve.hxx>
#include <BRepBuilderAPI_MakeFace.hxx>
#include <BRepBuilderAPI_MakeShell.hxx>
#include <BRepBuilderAPI_Sewing.hxx>
#include <BRepOffsetAPI_FindContigousEdges.hxx>
#include <TopExp_Explorer.hxx>
#include <TopoDS.hxx>
#include <TCollection_AsciiString.hxx>
#include <Geom_Surface.hxx>
#include <Geom2d_TrimmedCurve.hxx>
#include <TopTools_SequenceOfShape.hxx>
#include <Precision.hxx>
#include <Draw_ProgressIndicator.hxx>
#include <BRepBuilderAPI_FastSewing.hxx>

#include <GeomAPI_ProjectPointOnSurf.hxx>
#include <Message.hxx>

//-----------------------------------------------------------------------
// suppressarg : suppress a[d],modifie na--
//-----------------------------------------------------------------------
static void suppressarg(Standard_Integer& na, const char** a, const Standard_Integer d)
{
  for (Standard_Integer i = d; i < na; i++)
  {
    a[i]     = a[i + 1];
    a[i + 1] = NULL;
  }
  na--;
}

//=======================================================================
// mkface
//=======================================================================

static Standard_Integer mkface(Draw_Interpretor&, Standard_Integer n, const char** a)
{
  if (n < 3)
    return 1;

  Handle(Geom_Surface) S = DrawTrSurf::GetSurface(a[2]);
  if (S.IsNull())
  {
    Message::SendFail() << a[2] << " is not a surface";
    return 1;
  }

  Standard_Boolean mkface = a[0][2] == 'f';
  TopoDS_Shape     res;

  Standard_Boolean Segment = Standard_False;
  if (!mkface && (n == 4 || n == 8))
  {
    Segment = !strcmp(a[n - 1], "1");
    n--;
  }

  if (n == 3)
  {
    if (mkface)
      res = BRepBuilderAPI_MakeFace(S, Precision::Confusion());
    else
      res = BRepBuilderAPI_MakeShell(S, Segment);
  }
  else if (n <= 5)
  {
    if (!mkface)
      return 1;
    Standard_Boolean orient = (n == 4);
    TopoDS_Shape     W      = DBRep::Get(a[3], TopAbs_WIRE);
    if (W.IsNull())
      return 1;
    res = BRepBuilderAPI_MakeFace(S, TopoDS::Wire(W), orient);
  }
  else
  {
    if (mkface)
      res = BRepBuilderAPI_MakeFace(S,
                                    Draw::Atof(a[3]),
                                    Draw::Atof(a[4]),
                                    Draw::Atof(a[5]),
                                    Draw::Atof(a[6]),
                                    Precision::Confusion());
    else
      res = BRepBuilderAPI_MakeShell(S,
                                     Draw::Atof(a[3]),
                                     Draw::Atof(a[4]),
                                     Draw::Atof(a[5]),
                                     Draw::Atof(a[6]),
                                     Segment);
  }

  DBRep::Set(a[1], res);
  return 0;
}

//=======================================================================
// quilt
//=======================================================================

static Standard_Integer quilt(Draw_Interpretor&, Standard_Integer n, const char** a)
{
  if (n < 4)
    return 1;
  BRepTools_Quilt Q;

  Standard_Integer i = 2;
  while (i < n)
  {
    TopoDS_Shape S = DBRep::Get(a[i]);
    if (!S.IsNull())
    {
      if (S.ShapeType() == TopAbs_EDGE)
      {
        if (i + 1 < n)
        {
          TopoDS_Shape E = DBRep::Get(a[i + 1]);
          if (!E.IsNull())
          {
            if (E.ShapeType() == TopAbs_EDGE)
            {
              i++;
              Q.Bind(TopoDS::Edge(S), TopoDS::Edge(E));
            }
          }
        }
      }
      if (S.ShapeType() == TopAbs_VERTEX)
      {
        if (i + 1 < n)
        {
          TopoDS_Shape E = DBRep::Get(a[i + 1]);
          if (!E.IsNull())
          {
            if (E.ShapeType() == TopAbs_VERTEX)
            {
              i++;
              Q.Bind(TopoDS::Vertex(S), TopoDS::Vertex(E));
            }
          }
        }
      }
      else
      {
        Q.Add(S);
      }
    }
    i++;
  }

  DBRep::Set(a[1], Q.Shells());
  return 0;
}

//=======================================================================
// mksurface
//=======================================================================

static Standard_Integer mksurface(Draw_Interpretor&, Standard_Integer n, const char** a)
{
  if (n < 3)
    return 1;

  TopoDS_Shape S = DBRep::Get(a[2], TopAbs_FACE);
  if (S.IsNull())
    return 1;
  TopLoc_Location      L;
  Handle(Geom_Surface) C = BRep_Tool::Surface(TopoDS::Face(S), L);

  DrawTrSurf::Set(a[1], C->Transformed(L.Transformation()));
  return 0;
}

//=======================================================================
// mkplane
//=======================================================================

static Standard_Integer mkplane(Draw_Interpretor& theDI, Standard_Integer n, const char** a)
{
  if (n < 3)
    return 1;

  TopoDS_Shape S = DBRep::Get(a[2], TopAbs_WIRE);
  if (S.IsNull())
    return 1;

  Standard_Boolean OnlyPlane = Standard_False;
  if (n == 4)
  {
    OnlyPlane = !strcmp(a[3], "1");
  }

  BRepBuilderAPI_MakeFace aMF(TopoDS::Wire(S), OnlyPlane);

  switch (aMF.Error())
  {
    case BRepBuilderAPI_FaceDone:
      DBRep::Set(a[1], aMF.Face());
      break;
    case BRepBuilderAPI_NoFace:
      theDI << "Error. mkplane has been finished with \"No Face\" status.\n";
      break;
    case BRepBuilderAPI_NotPlanar:
      theDI << "Error. mkplane has been finished with \"Not Planar\" status.\n";
      break;
    case BRepBuilderAPI_CurveProjectionFailed:
      theDI << "Error. mkplane has been finished with \"Fail in projection curve\" status.\n";
      break;
    case BRepBuilderAPI_ParametersOutOfRange:
      theDI << "Error. mkplane has been finished with \"Parameters are out of range\" status.\n";
      break;
    default:
      theDI << "Error. Undefined status. Please check the code.\n";
      break;
  }

  return 0;
}

//=======================================================================
// pcurve
//=======================================================================
Standard_IMPORT Draw_Color DrawTrSurf_CurveColor(const Draw_Color col);
Standard_IMPORT void       DBRep_WriteColorOrientation();
Standard_IMPORT Draw_Color DBRep_ColorOrientation(const TopAbs_Orientation Or);

static Standard_Integer pcurve(Draw_Interpretor&, Standard_Integer n, const char** a)
{
  Standard_Boolean mute = Standard_False;
  for (Standard_Integer ia = 1; ia < n; ia++)
  {
    if (!strcasecmp(a[ia], "-mute"))
    {
      suppressarg(n, a, ia);
      mute = Standard_True;
    }
  }

  if (n == 2)
  {
    // pcurves of a face
    TopoDS_Shape S = DBRep::Get(a[1], TopAbs_FACE);
    if (S.IsNull())
      return 1;

    if (!mute)
      DBRep_WriteColorOrientation();
    Draw_Color col, savecol = DrawTrSurf_CurveColor(Draw_rouge);

    char*         name = new char[100];
    Standard_Real f, l;
    S.Orientation(TopAbs_FORWARD);
    TopExp_Explorer ex(S, TopAbs_EDGE);
    for (Standard_Integer i = 1; ex.More(); ex.Next(), i++)
    {
      const Handle(Geom2d_Curve) c =
        BRep_Tool::CurveOnSurface(TopoDS::Edge(ex.Current()), TopoDS::Face(S), f, l);
      if (c.IsNull())
      {
        std::cout << "Error: Edge " << i << " does not have pcurve" << std::endl;
        continue;
      }
      col = DBRep_ColorOrientation(ex.Current().Orientation());
      DrawTrSurf_CurveColor(col);

      Sprintf(name, "%s_%d", a[1], i);
      Standard_Real    fr = c->FirstParameter(), lr = c->LastParameter();
      Standard_Boolean IsPeriodic = c->IsPeriodic();
      if (c->DynamicType() == STANDARD_TYPE(Geom2d_TrimmedCurve))
      {
        const Handle(Geom2d_Curve)& aC = Handle(Geom2d_TrimmedCurve)::DownCast(c)->BasisCurve();
        IsPeriodic                     = aC->IsPeriodic();
        fr                             = aC->FirstParameter();
        lr                             = aC->LastParameter();
      }
      if (!IsPeriodic && ((fr - f > Precision::PConfusion()) || (l - lr > Precision::PConfusion())))
      {
        DrawTrSurf::Set(name, c);
      }
      else
      {
        DrawTrSurf::Set(name, new Geom2d_TrimmedCurve(c, f, l));
      }
    }
    DrawTrSurf_CurveColor(savecol);
  }
  else if (n >= 4)
  {
    TopoDS_Shape SE = DBRep::Get(a[2], TopAbs_EDGE);
    if (SE.IsNull())
      return 1;
    TopoDS_Shape SF = DBRep::Get(a[3], TopAbs_FACE);
    if (SF.IsNull())
      return 1;

    Draw_Color                 col, savecol = DrawTrSurf_CurveColor(Draw_rouge);
    Standard_Real              f, l;
    const Handle(Geom2d_Curve) c =
      BRep_Tool::CurveOnSurface(TopoDS::Edge(SE), TopoDS::Face(SF), f, l);
    Standard_Real    fr = c->FirstParameter(), lr = c->LastParameter();
    Standard_Boolean IsPeriodic = c->IsPeriodic();
    if (c->DynamicType() == STANDARD_TYPE(Geom2d_TrimmedCurve))
    {
      const Handle(Geom2d_Curve)& aC = Handle(Geom2d_TrimmedCurve)::DownCast(c)->BasisCurve();
      IsPeriodic                     = aC->IsPeriodic();
      fr                             = aC->FirstParameter();
      lr                             = aC->LastParameter();
    }

    col = DBRep_ColorOrientation(SE.Orientation());
    DrawTrSurf_CurveColor(col);
    if (!IsPeriodic && ((fr - f > Precision::PConfusion()) || (l - lr > Precision::PConfusion())))
    {
      DrawTrSurf::Set(a[1], c);
    }
    else
    {
      DrawTrSurf::Set(a[1], new Geom2d_TrimmedCurve(c, f, l));
    }
    DrawTrSurf_CurveColor(savecol);
  }
  else
  {
    return 1;
  }

  return 0;
}

//=======================================================================
// sewing
//=======================================================================

static Standard_Integer sewing(Draw_Interpretor& theDi,
                               Standard_Integer  theArgc,
                               const char**      theArgv)
{
  BRepBuilderAPI_Sewing    aSewing;
  Standard_Integer         aPar = 1;
  TopTools_SequenceOfShape aSeq;

  Standard_Real    aTol               = 1.0e-06;
  Standard_Boolean aSewingMode        = Standard_True;
  Standard_Boolean anAnalysisMode     = Standard_True;
  Standard_Boolean aCuttingMode       = Standard_True;
  Standard_Boolean aNonManifoldMode   = Standard_False;
  Standard_Boolean aSameParameterMode = Standard_True;
  Standard_Boolean aFloatingEdgesMode = Standard_False;
  Standard_Boolean aFaceMode          = Standard_True;
  Standard_Boolean aSetMinTol         = Standard_False;
  Standard_Real    aMinTol            = 0.;
  Standard_Real    aMaxTol            = Precision::Infinite();

  for (Standard_Integer i = 2; i < theArgc; i++)
  {
    if (theArgv[i][0] == '-' || theArgv[i][0] == '+')
    {
      Standard_Boolean aVal = (theArgv[i][0] == '+' ? Standard_True : Standard_False);
      switch (tolower(theArgv[i][1]))
      {
        case 'm': {
          if (tolower(theArgv[i][2]) == 'i' && i + 1 < theArgc)
          {
            if (Draw::Atof(theArgv[i + 1]))
            {
              aMinTol    = Draw::Atof(theArgv[++i]);
              aSetMinTol = Standard_True;
            }
            else
            {
              theDi << "Error! min tolerance can't possess the null value\n";
              return (1);
            }
          }
          if (tolower(theArgv[i][2]) == 'a' && i + 1 < theArgc)
          {
            if (Draw::Atof(theArgv[i + 1]))
              aMaxTol = Draw::Atof(theArgv[++i]);
            else
            {
              theDi << "Error! max tolerance can't possess the null value\n";
              return (1);
            }
          }
        }
        break;
        case 's':
          aSewingMode = aVal;
          break;
        case 'a':
          anAnalysisMode = aVal;
          break;
        case 'c':
          aCuttingMode = aVal;
          break;
        case 'n':
          aNonManifoldMode = aVal;
          break;
        case 'p':
          aSameParameterMode = aVal;
          break;
        case 'e':
          aFloatingEdgesMode = aVal;
          break;
        case 'f':
          aFaceMode = aVal;
          break;
      }
    }
    else
    {
      TopoDS_Shape aShape = DBRep::Get(theArgv[i]);
      if (!aShape.IsNull())
      {
        aSeq.Append(aShape);
        aPar++;
      }
      else
      {
        if (Draw::Atof(theArgv[i]))
          aTol = Draw::Atof(theArgv[i]);
      }
    }
  }

  if (aPar < 2)
  {
    theDi << "Use: " << theArgv[0]
          << " result [tolerance] shape1 shape2 ... [min tolerance] [max tolerance] [switches]\n";
    theDi << "To set user's value of min/max tolerances the following syntax is used: +<parameter> "
             "<value>\n";
    theDi << "- parameters are identified by letters:\n";
    theDi << "  mint - min tolerance\n";
    theDi << "  maxt - max tolerance\n";
    theDi << "Switches allow to tune other parameters of Sewing\n";
    theDi << "The following syntax is used: <symbol><parameter>\n";
    theDi << "- symbol may be - to set parameter off, + to set on\n";
    theDi << "- parameters are identified by letters:\n";
    theDi << "  s - mode for creating sewed shape\n";
    theDi << "  a - mode for analysis of input shapes\n";
    theDi << "  c - mode for cutting of free edges\n";
    theDi << "  n - mode for non manifold processing\n";
    theDi << "  p - mode for same parameter processing for edges\n";
    theDi << "  e - mode for sewing floating edges\n";
    theDi << "  f - mode for sewing faces\n";
    return (1);
  }

  if (!aSetMinTol)
    aMinTol = aTol * 1e-4;
  if (aTol < Precision::Confusion())
    aTol = Precision::Confusion();
  if (aMinTol < Precision::Confusion())
    aMinTol = Precision::Confusion();
  if (aMinTol > aTol)
  {
    theDi << "Error! min tolerance can't exceed working tolerance\n";
    return (1);
  }
  if (aMaxTol < aTol)
  {
    theDi << "Error! max tolerance can't be less than working tolerance\n";
    return (1);
  }

  aSewing.Init(aTol, aSewingMode, anAnalysisMode, aCuttingMode, aNonManifoldMode);
  aSewing.SetSameParameterMode(aSameParameterMode);
  aSewing.SetFloatingEdgesMode(aFloatingEdgesMode);
  aSewing.SetFaceMode(aFaceMode);
  aSewing.SetMinTolerance(aMinTol);
  aSewing.SetMaxTolerance(aMaxTol);

  for (Standard_Integer i = 1; i <= aSeq.Length(); i++)
    aSewing.Add(aSeq.Value(i));

  Handle(Draw_ProgressIndicator) aProgress = new Draw_ProgressIndicator(theDi, 1);
  aSewing.Perform(aProgress->Start());
  aSewing.Dump();

  const TopoDS_Shape& aRes = aSewing.SewedShape();
  if (!aRes.IsNull())
    DBRep::Set(theArgv[1], aRes);
  return 0;
}

//=================================================================================================

Standard_Integer fastsewing(Draw_Interpretor& theDI,
                            Standard_Integer  theNArg,
                            const char**      theArgVal)
{
  if (theNArg < 3)
  {
    //                0         1       2     3         4
    theDI << "Use: fastsewing result [-tol <value>] <list_of_faces>\n";
    return 1;
  }

  BRepBuilderAPI_FastSewing aFS;

  Standard_Integer aStartIndex = 2;

  if (!strcmp(theArgVal[aStartIndex], "-tol"))
  {
    aFS.SetTolerance(Draw::Atof(theArgVal[aStartIndex + 1]));
    aStartIndex = 4;
  }

  for (Standard_Integer i = aStartIndex; i < theNArg; i++)
  {
    TopoDS_Shape aS = DBRep::Get(theArgVal[i]);

    if (!aFS.Add(aS))
    {
      theDI << "Face is not added. See statuses.\n";
    }
  }

  BRepBuilderAPI_FastSewing::FS_VARStatuses aStatus = aFS.GetStatuses();

  if (aStatus)
  {
    theDI << "Error: There are some problems while adding ("
          << (static_cast<Standard_Integer>(aStatus)) << ")\n";
    aFS.GetStatuses(&std::cout);
  }

  aFS.Perform();

  aStatus = aFS.GetStatuses();

  if (aStatus)
  {
    theDI << "Error: There are some problems while performing ("
          << (static_cast<Standard_Integer>(aStatus)) << ")\n";
    aFS.GetStatuses(&std::cout);
  }

  DBRep::Set(theArgVal[1], aFS.GetResult());

  return 0;
}

//=======================================================================
// continuity
//=======================================================================

static Standard_Integer continuity(Draw_Interpretor&, Standard_Integer n, const char** a)
{
  if (n < 2)
    return (1);

  BRepOffsetAPI_FindContigousEdges aFind;

  TopoDS_Shape     sh = DBRep::Get(a[1]);
  Standard_Integer i  = 1;
  if (sh.IsNull())
  {
    if (n < 3)
      return (1);
    Standard_Real tol = Draw::Atof(a[1]);
    aFind.Init(tol, Standard_False);
    i = 2;
  }

  while (i < n)
  {
    sh = DBRep::Get(a[i]);
    aFind.Add(sh);
    i++;
  }

  aFind.Perform();
  aFind.Dump();

  return 0;
}

//=======================================================================
// encoderegularity
//=======================================================================
static Standard_Integer encoderegularity(Draw_Interpretor&, Standard_Integer n, const char** a)

{
  if (n < 2)
    return 1;
  TopoDS_Shape sh = DBRep::Get(a[1]);
  if (sh.IsNull())
    return 1;
  if (n == 2)
    BRepLib::EncodeRegularity(sh);
  else
  {
    Standard_Real Tol = Draw::Atof(a[2]);
    Tol *= M_PI / 180.;
    BRepLib::EncodeRegularity(sh, Tol);
  }
  return 0;
}

static Standard_Integer getedgeregul(Draw_Interpretor& di, Standard_Integer argc, const char** argv)
{
  if (argc < 3)
  {
    Message::SendFail()
      << "Invalid number of arguments. Should be: checkedgeregularity edge face1 [face2]";
    return 1;
  }

  TopoDS_Shape anEdge = DBRep::Get(argv[1], TopAbs_EDGE);
  TopoDS_Shape aFace1 = DBRep::Get(argv[2], TopAbs_FACE);
  TopoDS_Shape aFace2 = (argc > 3 ? DBRep::Get(argv[3], TopAbs_FACE) : aFace1);
  if (anEdge.IsNull() || aFace1.IsNull() || aFace2.IsNull())
  {
    Message::SendFail()
      << "Invalid number of arguments. Should be: getedgeregularity edge face1 [face2]";
    return 1;
  }

  GeomAbs_Shape aRegularity =
    BRep_Tool::Continuity(TopoDS::Edge(anEdge), TopoDS::Face(aFace1), TopoDS::Face(aFace2));
  TCollection_AsciiString aStrReg("Regularity of edge : ");
  switch (aRegularity)
  {
    default:
    case GeomAbs_C0:
      aStrReg += "C0";
      break;
    case GeomAbs_G1:
      aStrReg += "G1";
      break;
    case GeomAbs_C1:
      aStrReg += "C1";
      break;
    case GeomAbs_G2:
      aStrReg += "G2";
      break;
    case GeomAbs_C2:
      aStrReg += "C2";
      break;
    case GeomAbs_C3:
      aStrReg += "C3";
      break;
    case GeomAbs_CN:
      aStrReg += "CN";
      break;
  };

  di << aStrReg.ToCString() << "\n";
  return 0; // Done
}

//=================================================================================================

static Standard_Integer projponf(Draw_Interpretor& di, Standard_Integer n, const char** a)
{
  if (n < 3 || n > 5)
  {
    di << "Project point on the face.\n";
    di << "Usage: projponf face pnt [extrema flag: -min/-max/-minmax] [extrema algo: "
          "-g(grad)/-t(tree)]\n";
    return 1;
  }
  // get face
  TopoDS_Shape aS = DBRep::Get(a[1]);
  if (aS.IsNull())
  {
    di << "the face is a null shape\n";
    return 0;
  }
  //
  if (aS.ShapeType() != TopAbs_FACE)
  {
    di << "not a face\n";
    return 0;
  }
  //
  const TopoDS_Face& aFace = *(TopoDS_Face*)&aS;
  //
  // get point
  gp_Pnt aP;
  DrawTrSurf::GetPoint(a[2], aP);
  //
  // get projection options
  // default values;
  Extrema_ExtAlgo anExtAlgo = Extrema_ExtAlgo_Grad;
  Extrema_ExtFlag anExtFlag = Extrema_ExtFlag_MINMAX;
  //
  for (Standard_Integer i = 3; i < n; ++i)
  {
    if (!strcasecmp(a[i], "-min"))
    {
      anExtFlag = Extrema_ExtFlag_MIN;
    }
    else if (!strcasecmp(a[i], "-max"))
    {
      anExtFlag = Extrema_ExtFlag_MAX;
    }
    else if (!strcasecmp(a[i], "-minmax"))
    {
      anExtFlag = Extrema_ExtFlag_MINMAX;
    }
    else if (!strcasecmp(a[i], "-t"))
    {
      anExtAlgo = Extrema_ExtAlgo_Tree;
    }
    else if (!strcasecmp(a[i], "-g"))
    {
      anExtAlgo = Extrema_ExtAlgo_Grad;
    }
  }
  //
  // get surface
  TopLoc_Location             aLoc;
  const Handle(Geom_Surface)& aSurf = BRep_Tool::Surface(aFace, aLoc);
  // move point to surface location
  aP.Transform(aLoc.Transformation().Inverted());
  //
  // get bounds of the surface
  Standard_Real aUMin, aUMax, aVMin, aVMax;
  aSurf->Bounds(aUMin, aUMax, aVMin, aVMax);
  //
  // initialize projector
  GeomAPI_ProjectPointOnSurf aProjPS;
  aProjPS.Init(aSurf, aUMin, aUMax, aVMin, aVMax);
  // set the options
  aProjPS.SetExtremaAlgo(anExtAlgo);
  aProjPS.SetExtremaFlag(anExtFlag);
  // perform projection
  aProjPS.Perform(aP);
  //
  if (aProjPS.NbPoints())
  {
    // lower distance
    Standard_Real aDist = aProjPS.LowerDistance();
    // lower distance parameters
    Standard_Real U, V;
    aProjPS.LowerDistanceParameters(U, V);
    // nearest point
    gp_Pnt aPProj = aProjPS.NearestPoint();
    // translate projection point to face location
    aPProj.Transform(aLoc.Transformation());
    //
    // print the projection values
    di << "proj dist = " << aDist << "\n";
    di << "uvproj = " << U << " " << V << "\n";
    di << "pproj = " << aPProj.X() << " " << aPProj.Y() << " " << aPProj.Z() << "\n";
  }
  else
  {
    if (!aProjPS.IsDone())
    {
      di << "projection failed\n";
    }
    else
    {
      di << "no projection found\n";
    }
  }
  return 0;
}

//=================================================================================================

void BRepTest::SurfaceCommands(Draw_Interpretor& theCommands)
{
  static Standard_Boolean done = Standard_False;
  if (done)
    return;
  done = Standard_True;

  DBRep::BasicCommands(theCommands);
  GeometryTest::SurfaceCommands(theCommands);

  const char* g = "Surface topology commands";

  theCommands.Add("mkface",
                  "mkface facename surfacename [ufirst ulast vfirst vlast] [wire [norient]]",
                  __FILE__,
                  mkface,
                  g);

  theCommands.Add("mkshell",
                  "mkshell shellname surfacename [ufirst ulast vfirst vlast] [segment 0/1]",
                  __FILE__,
                  mkface,
                  g);

  theCommands.Add("quilt",
                  "quilt compoundname shape1 edgeshape2  edgeshape1... shape2  edgeshape3 "
                  "edgeshape1or2 ... shape3 ...",
                  __FILE__,
                  quilt,
                  g);

  theCommands.Add("mksurface", "mksurface surfacename facename", __FILE__, mksurface, g);

  theCommands.Add("mkplane", "mkplane facename wirename [OnlyPlane 0/1]", __FILE__, mkplane, g);

  theCommands.Add("pcurve", "pcurve [name edgename] facename", __FILE__, pcurve, g);

  theCommands.Add(
    "sewing",
    "sewing result [tolerance] shape1 shape2 ... [min tolerance] [max tolerance] [switches]",
    __FILE__,
    sewing,
    g);

  theCommands.Add("continuity",
                  "continuity [tolerance] shape1 shape2 ...",
                  __FILE__,
                  continuity,
                  g);

  theCommands.Add("encoderegularity",
                  "encoderegularity shape [tolerance (in degree)]",
                  __FILE__,
                  encoderegularity,
                  g);

  theCommands.Add("fastsewing",
                  "fastsewing result [-tol <value>] <list_of_faces>",
                  __FILE__,
                  fastsewing,
                  g);
  theCommands.Add("getedgeregularity",
                  "getedgeregularity edge face1 [face2]",
                  __FILE__,
                  getedgeregul,
                  g);

  theCommands.Add(
    "projponf",
    "projponf face pnt [extrema flag: -min/-max/-minmax] [extrema algo: -g(grad)/-t(tree)]\n"
    "\t\tProject point on the face.",
    __FILE__,
    projponf,
    g);
}