Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
// Created on: 1995-04-20
// Created by: Bruno DUMORTIER
// Copyright (c) 1995-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.
// Modified by skv - Fri Jul 8 11:21:38 2005 OCC9145
#include <Adaptor3d_Curve.hxx>
#include <Adaptor2d_OffsetCurve.hxx>
#include <BRep_Builder.hxx>
#include <BRep_GCurve.hxx>
#include <BRep_TEdge.hxx>
#include <BRep_Tool.hxx>
#include <BRep_TVertex.hxx>
#include <BRepAdaptor_Curve.hxx>
#include <BRepAdaptor_Surface.hxx>
#include <BRepFill_DataMapOfNodeShape.hxx>
#include <BRepFill_DataMapOfShapeSequenceOfPnt.hxx>
#include <BRepFill_DataMapOfShapeSequenceOfReal.hxx>
#include <BRepFill_OffsetWire.hxx>
#include <BRepFill_TrimEdgeTool.hxx>
#include <BRepLib.hxx>
#include <BRepLib_MakeEdge.hxx>
#include <BRepLib_MakeVertex.hxx>
#include <BRepLib_MakeWire.hxx>
#include <BRepMAT2d_BisectingLocus.hxx>
#include <BRepMAT2d_Explorer.hxx>
#include <BRepMAT2d_LinkTopoBilo.hxx>
#include <BRepTools.hxx>
#include <BRepTools_Substitution.hxx>
#include <BRepTools_WireExplorer.hxx>
#include <Geom2d_Circle.hxx>
#include <Geom2d_Curve.hxx>
#include <Geom2d_Line.hxx>
#include <Geom2d_OffsetCurve.hxx>
#include <Geom2d_TrimmedCurve.hxx>
#include <Geom2dAdaptor_Curve.hxx>
#include <Geom2dLProp_CLProps2d.hxx>
#include <Geom_Circle.hxx>
#include <Geom_Line.hxx>
#include <Geom_OffsetCurve.hxx>
#include <Geom_Plane.hxx>
#include <Geom_Surface.hxx>
#include <Geom_TrimmedCurve.hxx>
#include <gp.hxx>
#include <gp_Dir2d.hxx>
#include <gp_Pln.hxx>
#include <gp_Vec.hxx>
#include <MAT2d_CutCurve.hxx>
#include <MAT_Arc.hxx>
#include <MAT_Graph.hxx>
#include <MAT_Node.hxx>
#include <Precision.hxx>
#include <Standard_ConstructionError.hxx>
#include <Standard_ErrorHandler.hxx>
#include <Standard_NotImplemented.hxx>
#include <TColgp_SequenceOfPnt.hxx>
#include <TColStd_SequenceOfReal.hxx>
#include <TopExp.hxx>
#include <TopExp_Explorer.hxx>
#include <TopoDS.hxx>
#include <TopoDS_Compound.hxx>
#include <TopoDS_Face.hxx>
#include <TopoDS_Iterator.hxx>
#include <TopoDS_Shape.hxx>
#include <TopoDS_Wire.hxx>
#include <TopTools_DataMapOfShapeListOfShape.hxx>
#include <TopTools_DataMapOfShapeSequenceOfShape.hxx>
#include <TopTools_IndexedDataMapOfShapeListOfShape.hxx>
#include <TopTools_IndexedMapOfShape.hxx>
#include <TopTools_ListOfShape.hxx>
#include <TopTools_MapOfShape.hxx>
#include <TopTools_SequenceOfShape.hxx>
#include <stdio.h>
#ifdef OCCT_DEBUG
// #define DRAW
#ifdef DRAW
#include <Draw.hxx>
#include <DrawTrSurf.hxx>
#include <DrawTrSurf_Curve2d.hxx>
#include <DBRep.hxx>
#include <Geom_Curve.hxx>
static Standard_Boolean AffichGeom = Standard_False;
static Standard_Boolean Affich2d = Standard_False;
static Standard_Boolean AffichEdge = Standard_False;
static Standard_Integer NbTRIMEDGES = 0;
static Standard_Integer NbOFFSET = 0;
static Standard_Integer NbEDGES = 0;
static Standard_Integer NbBISSEC = 0;
#endif
#endif
// Modified by Sergey KHROMOV - Thu Nov 16 17:24:39 2000 Begin
static void QuasiFleche(const Adaptor3d_Curve& C,
const Standard_Real Deflection2,
const Standard_Real Udeb,
const gp_Pnt& Pdeb,
const gp_Vec& Vdeb,
const Standard_Real Ufin,
const gp_Pnt& Pfin,
const gp_Vec& Vfin,
const Standard_Integer Nbmin,
const Standard_Real Eps,
TColStd_SequenceOfReal& Parameters,
TColgp_SequenceOfPnt& Points);
static Standard_Boolean PerformCurve(TColStd_SequenceOfReal& Parameters,
TColgp_SequenceOfPnt& Points,
const Adaptor3d_Curve& C,
const Standard_Real Deflection,
const Standard_Real U1,
const Standard_Real U2,
const Standard_Real EPSILON,
const Standard_Integer Nbmin);
static void CheckBadEdges(const TopoDS_Face& Spine,
const Standard_Real Offset,
const BRepMAT2d_BisectingLocus& Locus,
const BRepMAT2d_LinkTopoBilo& Link,
TopTools_ListOfShape& BadEdges);
static Standard_Integer CutEdge(const TopoDS_Edge& E,
const TopoDS_Face& F,
Standard_Integer ForceCut,
TopTools_ListOfShape& Cuts);
static void CutCurve(const Handle(Geom2d_TrimmedCurve)& C,
const Standard_Integer nbParts,
TColGeom2d_SequenceOfCurve& theCurves);
// Modified by Sergey KHROMOV - Thu Nov 16 17:24:47 2000 End
static void EdgeVertices(const TopoDS_Edge& E, TopoDS_Vertex& V1, TopoDS_Vertex& V2)
{
if (E.Orientation() == TopAbs_REVERSED)
{
TopExp::Vertices(E, V2, V1);
}
else
{
TopExp::Vertices(E, V1, V2);
}
}
static Standard_Boolean VertexFromNode(const Handle(MAT_Node)& aNode,
const Standard_Real Offset,
gp_Pnt2d& PN,
BRepFill_DataMapOfNodeShape& MapNodeVertex,
TopoDS_Vertex& VN);
static void StoreInMap(const TopoDS_Shape& V1,
const TopoDS_Shape& V2,
TopTools_IndexedDataMapOfShapeShape& MapVV);
static void TrimEdge(const TopoDS_Edge& CurrentEdge,
const TopoDS_Shape& CurrentSpine,
const TopoDS_Face& AllSpine,
const TopTools_ListOfShape& D,
TopTools_SequenceOfShape& Sv,
TColStd_SequenceOfReal& MapverPar,
TopTools_SequenceOfShape& S,
TopTools_IndexedDataMapOfShapeShape& MapVV,
const Standard_Integer IndOfE);
static Standard_Boolean IsInnerEdge(const TopoDS_Shape& ProE,
const TopoDS_Face& AllSpine,
Standard_Real& TrPar1,
Standard_Real& TrPar2);
static Standard_Boolean DoubleOrNotInside(const TopTools_ListOfShape& EC, const TopoDS_Vertex& V);
static Standard_Boolean IsSmallClosedEdge(const TopoDS_Edge& anEdge, const TopoDS_Vertex& aVertex);
static void MakeCircle(const TopoDS_Edge& E,
const TopoDS_Vertex& V,
const TopoDS_Face& F,
const Standard_Real Offset,
BRepFill_IndexedDataMapOfOrientedShapeListOfShape& Map,
const Handle(Geom_Plane)& RefPlane);
static void MakeOffset(const TopoDS_Edge& E,
const TopoDS_Face& F,
const Standard_Real Offset,
BRepFill_IndexedDataMapOfOrientedShapeListOfShape& Map,
const Handle(Geom_Plane)& RefPlane,
const Standard_Boolean IsOpenResult,
const GeomAbs_JoinType theJoinType,
const TopoDS_Vertex* Ends);
Standard_Boolean CheckSmallParamOnEdge(const TopoDS_Edge& anEdge);
//=================================================================================================
static Standard_Boolean KPartCircle(const TopoDS_Face& mySpine,
const Standard_Real myOffset,
const Standard_Boolean IsOpenResult,
const Standard_Real Alt,
TopoDS_Shape& myShape,
BRepFill_IndexedDataMapOfOrientedShapeListOfShape& myMap,
Standard_Boolean& myIsDone)
{
TopoDS_Edge E;
for (TopExp_Explorer anEdgeIter(mySpine, TopAbs_EDGE); anEdgeIter.More(); anEdgeIter.Next())
{
if (!E.IsNull())
{
return Standard_False;
}
E = TopoDS::Edge(anEdgeIter.Current());
}
if (E.IsNull())
{
return Standard_False;
}
Standard_Real f, l;
TopLoc_Location L;
Handle(Geom_Curve) C = BRep_Tool::Curve(E, L, f, l);
if (C.IsNull())
{
return Standard_False;
}
if (C->IsKind(STANDARD_TYPE(Geom_TrimmedCurve)))
{
Handle(Geom_TrimmedCurve) Ct = Handle(Geom_TrimmedCurve)::DownCast(C);
C = Ct->BasisCurve();
}
if ((C->IsKind(STANDARD_TYPE(Geom_Circle)) && BRep_Tool::IsClosed(E)) || // closed circle
IsOpenResult)
{
Standard_Real anOffset = myOffset;
Handle(Geom2d_Curve) aPCurve = BRep_Tool::CurveOnSurface(E, mySpine, f, l);
Handle(Geom2dAdaptor_Curve) AHC = new Geom2dAdaptor_Curve(aPCurve, f, l);
Handle(Geom2d_Curve) OC;
if (AHC->GetType() == GeomAbs_Line)
{
if (E.Orientation() == TopAbs_FORWARD)
anOffset *= -1;
Adaptor2d_OffsetCurve Off(AHC, anOffset);
OC = new Geom2d_Line(Off.Line());
}
else if (AHC->GetType() == GeomAbs_Circle)
{
if (E.Orientation() == TopAbs_FORWARD)
anOffset *= -1;
if (!BRep_Tool::IsClosed(E))
{
anOffset *= -1;
}
gp_Circ2d theCirc = AHC->Circle();
if (anOffset > 0. || Abs(anOffset) < theCirc.Radius())
OC = new Geom2d_Circle(theCirc.Position(), theCirc.Radius() + anOffset);
else
{
myIsDone = Standard_False;
return Standard_False;
}
}
else
{
if (E.Orientation() == TopAbs_FORWARD)
anOffset *= -1;
Handle(Geom2d_TrimmedCurve) G2dT = new Geom2d_TrimmedCurve(aPCurve, f, l);
OC = new Geom2d_OffsetCurve(G2dT, anOffset);
}
Handle(Geom_Surface) aSurf = BRep_Tool::Surface(mySpine);
Handle(Geom_Plane) aPlane = Handle(Geom_Plane)::DownCast(aSurf);
myShape = BRepLib_MakeEdge(OC, aPlane, f, l);
BRepLib::BuildCurve3d(TopoDS::Edge(myShape));
myShape.Orientation(E.Orientation());
myShape.Location(L);
if (fabs(Alt) > gp::Resolution())
{
BRepAdaptor_Surface S(mySpine, 0);
gp_Ax1 Nor = S.Plane().Axis();
gp_Trsf T;
gp_Vec Trans(Nor.Direction());
Trans = Alt * Trans;
T.SetTranslation(Trans);
myShape.Move(TopLoc_Location(T));
}
TopTools_ListOfShape LL;
LL.Append(myShape);
myMap.Add(E, LL);
TopoDS_Edge myEdge = TopoDS::Edge(myShape);
myShape = BRepLib_MakeWire(myEdge);
myIsDone = Standard_True;
return Standard_True;
}
return Standard_False;
}
//=================================================================================================
BRepFill_OffsetWire::BRepFill_OffsetWire()
: myIsOpenResult(Standard_False),
myIsDone(Standard_False)
{
}
//=================================================================================================
BRepFill_OffsetWire::BRepFill_OffsetWire(const TopoDS_Face& Spine,
const GeomAbs_JoinType Join,
const Standard_Boolean IsOpenResult)
{
Init(Spine, Join, IsOpenResult);
}
//=================================================================================================
void BRepFill_OffsetWire::Init(const TopoDS_Face& Spine,
const GeomAbs_JoinType Join,
const Standard_Boolean IsOpenResult)
{
myIsDone = Standard_False;
TopoDS_Shape aLocalShape = Spine.Oriented(TopAbs_FORWARD);
mySpine = TopoDS::Face(aLocalShape);
// mySpine = TopoDS::Face(Spine.Oriented(TopAbs_FORWARD));
myJoinType = Join;
myIsOpenResult = IsOpenResult;
myMap.Clear();
myMapSpine.Clear();
//------------------------------------------------------------------
// cut the spine for bissectors.
//------------------------------------------------------------------
BRepMAT2d_Explorer Exp;
Exp.Perform(mySpine);
mySpine = TopoDS::Face(Exp.ModifiedShape(mySpine));
PrepareSpine();
TopoDS_Shape aShape;
BRepFill_IndexedDataMapOfOrientedShapeListOfShape aMap;
Standard_Boolean Done;
if (KPartCircle(myWorkSpine, 1., myIsOpenResult, 0., aShape, aMap, Done))
return;
//-----------------------------------------------------
// Calculate the map of bissectors to the left.
// and Links Topology -> base elements of the map.
//-----------------------------------------------------
Exp.Perform(myWorkSpine);
myBilo.Compute(Exp, 1, MAT_Left, myJoinType, myIsOpenResult);
myLink.Perform(Exp, myBilo);
}
//=================================================================================================
Standard_Boolean BRepFill_OffsetWire::IsDone() const
{
return myIsDone;
}
//=================================================================================================
const TopoDS_Face& BRepFill_OffsetWire::Spine() const
{
return mySpine;
}
//=================================================================================================
const TopoDS_Shape& BRepFill_OffsetWire::Shape() const
{
return myShape;
}
//=================================================================================================
const TopTools_ListOfShape& BRepFill_OffsetWire::GeneratedShapes(const TopoDS_Shape& SpineShape)
{
if (!myCallGen)
{
if (!myMapSpine.IsEmpty())
{
// myMapSpine can be empty if passed by PerformWithBilo.
TopTools_DataMapIteratorOfDataMapOfShapeShape it(myMapSpine);
for (; it.More(); it.Next())
{
if (myMap.Contains(it.Key()))
{
if (!myMap.Contains(it.Value()))
{
TopTools_ListOfShape L;
myMap.Add(it.Value(), L);
}
if (!it.Value().IsSame(it.Key()))
{
myMap.ChangeFromKey(it.Value()).Append(myMap.ChangeFromKey(it.Key()));
myMap.RemoveKey(it.Key());
}
}
if (myMap.Contains(it.Key().Reversed()))
{
if (!myMap.Contains(it.Value().Reversed()))
{
TopTools_ListOfShape L;
myMap.Add(it.Value().Reversed(), L);
}
if (!it.Value().IsSame(it.Key()))
{
myMap.ChangeFromKey(it.Value().Reversed())
.Append(myMap.ChangeFromKey(it.Key().Reversed()));
myMap.RemoveKey(it.Key().Reversed());
}
}
}
}
myCallGen = Standard_True;
}
if (myMap.Contains(SpineShape))
{
return myMap.FindFromKey(SpineShape);
}
else
{
static TopTools_ListOfShape Empty;
return Empty;
}
}
//=================================================================================================
GeomAbs_JoinType BRepFill_OffsetWire::JoinType() const
{
return myJoinType;
}
//=================================================================================================
void BRepFill_OffsetWire::Perform(const Standard_Real Offset, const Standard_Real Alt)
{
// Modified by skv - Fri Jul 8 11:21:38 2005 OCC9145 Begin
try
{
OCC_CATCH_SIGNALS
myCallGen = Standard_False;
if (KPartCircle(myWorkSpine, Offset, myIsOpenResult, Alt, myShape, myMap, myIsDone))
return;
TopoDS_Face oldWorkSpain = myWorkSpine;
TopTools_ListOfShape BadEdges;
CheckBadEdges(myWorkSpine, Offset, myBilo, myLink, BadEdges);
if (!BadEdges.IsEmpty())
{
// Modification of myWorkSpine;
// std::cout << "Modification of myWorkSpine : " << BadEdges.Extent() << std::endl;
BRepTools_Substitution aSubst;
TopTools_ListIteratorOfListOfShape it(BadEdges);
TopTools_ListOfShape aL;
Standard_Real aDefl = .01 * Abs(Offset);
TColStd_SequenceOfReal Parameters;
TColgp_SequenceOfPnt Points;
for (; it.More(); it.Next())
{
aL.Clear();
Parameters.Clear();
Points.Clear();
const TopoDS_Shape& anE = it.Value();
TopoDS_Vertex Vf, Vl;
TopExp::Vertices(TopoDS::Edge(anE), Vf, Vl);
Standard_Real f, l;
Handle(Geom_Curve) G3d = BRep_Tool::Curve(TopoDS::Edge(anE), f, l);
GeomAdaptor_Curve AC(G3d, f, l);
PerformCurve(Parameters, Points, AC, aDefl, f, l, Precision::Confusion(), 2);
Standard_Integer NPnts = Points.Length();
if (NPnts > 2)
{
// std::cout << NPnts << " points " << std::endl;
TopoDS_Vertex FV = Vf;
TopoDS_Vertex LV;
TopoDS_Edge newE;
Standard_Integer np;
for (np = 2; np < NPnts; np++)
{
gp_Pnt LP = Points(np);
LV = BRepLib_MakeVertex(LP);
newE = BRepLib_MakeEdge(FV, LV);
aL.Append(newE);
FV = LV;
}
LV = Vl;
newE = BRepLib_MakeEdge(FV, LV);
aL.Append(newE);
}
else
{
// std::cout << " 2 points " << std::endl;
TopoDS_Edge newE = BRepLib_MakeEdge(Vf, Vl);
aL.Append(newE);
}
// Update myMapSpine
if (myMapSpine.IsBound(anE))
{
TopTools_ListIteratorOfListOfShape newit(aL);
for (; newit.More(); newit.Next())
{
TopoDS_Edge NewEdge = TopoDS::Edge(newit.Value());
myMapSpine.Bind(NewEdge, myMapSpine(anE));
TopoDS_Vertex NewV1, NewV2;
EdgeVertices(NewEdge, NewV1, NewV2);
if (!myMapSpine.IsBound(NewV1))
myMapSpine.Bind(NewV1, myMapSpine(anE));
if (!myMapSpine.IsBound(NewV2))
myMapSpine.Bind(NewV2, myMapSpine(anE));
}
myMapSpine.UnBind(anE);
}
///////////////////
aSubst.Substitute(anE, aL);
}
TopTools_DataMapOfShapeListOfShape wwmap;
TopoDS_Iterator itws(myWorkSpine);
for (; itws.More(); itws.Next())
{
const TopoDS_Shape& aWire = itws.Value();
aSubst.Build(aWire);
if (aSubst.IsCopied(aWire))
{
TopoDS_Wire NewWire = TopoDS::Wire(aSubst.Copy(aWire).First());
NewWire.Closed(aWire.Closed());
TopTools_ListOfShape Lw;
Lw.Append(NewWire);
wwmap.Bind(aWire, Lw);
}
}
aSubst.Clear();
TopTools_DataMapIteratorOfDataMapOfShapeListOfShape itmap(wwmap);
for (; itmap.More(); itmap.Next())
aSubst.Substitute(itmap.Key(), itmap.Value());
aSubst.Build(myWorkSpine);
if (aSubst.IsCopied(myWorkSpine))
{
myWorkSpine = TopoDS::Face(aSubst.Copy(myWorkSpine).First());
BRepMAT2d_Explorer newExp;
newExp.Perform(myWorkSpine);
BRepMAT2d_BisectingLocus newBilo;
BRepMAT2d_LinkTopoBilo newLink;
newBilo.Compute(newExp, 1, MAT_Left, myJoinType, myIsOpenResult);
if (!newBilo.IsDone())
{
myShape.Nullify();
myIsDone = Standard_False;
return;
}
newLink.Perform(newExp, newBilo);
PerformWithBiLo(myWorkSpine, Offset, newBilo, newLink, myJoinType, Alt);
myWorkSpine = oldWorkSpain;
}
else
{
PerformWithBiLo(myWorkSpine, Offset, myBilo, myLink, myJoinType, Alt);
}
}
else
{
PerformWithBiLo(myWorkSpine, Offset, myBilo, myLink, myJoinType, Alt);
}
}
catch (Standard_Failure const& anException)
{
#ifdef OCCT_DEBUG
std::cout << "An exception was caught in BRepFill_OffsetWire::Perform : ";
anException.Print(std::cout);
std::cout << std::endl;
#endif
(void)anException;
myShape.Nullify();
myIsDone = Standard_False;
return;
}
// Modified by skv - Fri Jul 8 11:21:38 2005 OCC9145 End
// Modified by Sergey KHROMOV - Thu Mar 14 10:48:15 2002 Begin
if (!myIsOpenResult)
{
TopExp_Explorer anExp(myShape, TopAbs_WIRE);
for (; anExp.More(); anExp.Next())
{
const TopoDS_Shape& aWire = anExp.Current();
if (!aWire.Closed())
{
myShape.Nullify();
myIsDone = Standard_False;
throw Standard_ConstructionError("Offset wire is not closed.");
}
}
}
// Modified by Sergey KHROMOV - Thu Mar 14 10:48:16 2002 End
}
//=================================================================================================
void Compute(const TopoDS_Face& Spine,
TopoDS_Shape& aShape,
BRepFill_IndexedDataMapOfOrientedShapeListOfShape& Map,
const Standard_Real Alt)
{
BRep_Builder B;
B.MakeCompound(TopoDS::Compound(aShape));
Standard_Real ALT = Alt;
if (Spine.Orientation() == TopAbs_REVERSED)
ALT = -Alt;
gp_Trsf T;
T.SetTranslation(gp_Vec(0., 0., ALT));
TopLoc_Location L(T);
for (TopExp_Explorer exp(Spine, TopAbs_WIRE); exp.More(); exp.Next())
{
const TopoDS_Wire& CurW = TopoDS::Wire(exp.Current());
TopoDS_Shape aLocalShape = CurW.Moved(L);
TopoDS_Wire NewW = TopoDS::Wire(aLocalShape);
// TopoDS_Wire NewW = TopoDS::Wire(CurW.Moved(L));
B.Add(aShape, NewW);
// update Map.
TopoDS_Iterator it1(CurW);
TopoDS_Iterator it2(NewW);
for (; it1.More(); it1.Next(), it2.Next())
{
TopTools_ListOfShape List;
List.Append(it2.Value());
Map.Add(it1.Value(), List);
}
}
}
//=================================================================================================
void BRepFill_OffsetWire::PerformWithBiLo(const TopoDS_Face& Spine,
const Standard_Real Offset,
const BRepMAT2d_BisectingLocus& Locus,
BRepMAT2d_LinkTopoBilo& Link,
const GeomAbs_JoinType Join,
const Standard_Real Alt)
{
myIsDone = Standard_False;
TopoDS_Shape aLocalShapeWork = Spine.Oriented(TopAbs_FORWARD);
myWorkSpine = TopoDS::Face(aLocalShapeWork);
// myWorkSpine = TopoDS::Face(Spine.Oriented(TopAbs_FORWARD));
myJoinType = Join;
myOffset = Offset;
myShape.Nullify();
if (mySpine.IsNull())
{
TopoDS_Shape aLocalShape = Spine.Oriented(TopAbs_FORWARD);
mySpine = TopoDS::Face(aLocalShape);
// mySpine = TopoDS::Face(Spine.Oriented(TopAbs_FORWARD));
}
myMap.Clear();
if (Abs(myOffset) < Precision::Confusion())
{
Compute(mySpine, myShape, myMap, Alt);
myIsDone = Standard_True;
return;
}
//********************************
// Calculate for a non null offset
//********************************
if (KPartCircle(myWorkSpine, Offset, myIsOpenResult, Alt, myShape, myMap, myIsDone))
return;
BRep_Builder myBuilder;
//---------------------------------------------------------------------
// MapNodeVertex : associate to each node of the map (key1) and to
// each element of the profile (key2) a vertex (item).
// MapBis : all edges or vertices (item) generated by
// a bisectrice on a face or an edge (key) of revolution tubes.
// MapVerPar : Map of parameters of vertices on parallel edges
// the list contained in MapVerPar (E) corresponds to
// parameters on E of vertices contained in MapBis(E);
//---------------------------------------------------------------------
BRepFill_DataMapOfNodeShape MapNodeVertex;
TopTools_DataMapOfShapeSequenceOfShape MapBis;
BRepFill_DataMapOfShapeSequenceOfReal MapVerPar;
TopTools_DataMapOfShapeShape EmptyMap;
TopTools_SequenceOfShape EmptySeq;
TopTools_ListOfShape EmptyList;
TColStd_SequenceOfReal EmptySeqOfReal;
Handle(Geom_Plane) RefPlane = Handle(Geom_Plane)::DownCast(BRep_Tool::Surface(myWorkSpine));
if (fabs(Alt) > gp::Resolution())
{
Standard_Real anAlt = Alt;
if (myWorkSpine.Orientation() == TopAbs_REVERSED)
anAlt = -Alt;
RefPlane = Handle(Geom_Plane)::DownCast(
RefPlane->Translated(anAlt * gp_Vec(RefPlane->Axis().Direction())));
}
//---------------------------------------------------------------
// Construction of Circles and OffsetCurves
//---------------------------------------------------------------
TopoDS_Vertex Ends[2];
if (myIsOpenResult)
{
TopoDS_Wire theWire;
TopoDS_Iterator iter(mySpine);
theWire = TopoDS::Wire(iter.Value());
TopExp::Vertices(theWire, Ends[0], Ends[1]);
}
if (Locus.NumberOfContours() == 0)
{
return;
}
for (Standard_Integer ic = 1; ic <= Locus.NumberOfContours(); ic++)
{
TopoDS_Shape PEE = Link.GeneratingShape(Locus.BasicElt(ic, Locus.NumberOfElts(ic)));
TopoDS_Shape& PE = PEE;
for (Standard_Integer ie = 1; ie <= Locus.NumberOfElts(ic); ie++)
{
const TopoDS_Shape& SE = Link.GeneratingShape(Locus.BasicElt(ic, ie));
if (SE.ShapeType() == TopAbs_VERTEX)
{
if (!SE.IsSame(Ends[0]) && !SE.IsSame(Ends[1]))
MakeCircle(TopoDS::Edge(PE), TopoDS::Vertex(SE), myWorkSpine, myOffset, myMap, RefPlane);
}
else
{
MakeOffset(TopoDS::Edge(SE),
myWorkSpine,
myOffset,
myMap,
RefPlane,
myIsOpenResult,
myJoinType,
Ends);
PE = SE;
}
}
}
// Remove possible hanging arcs on vertices
if (myIsOpenResult && myJoinType == GeomAbs_Arc)
{
if (!myMap.IsEmpty() && myMap.FindKey(1).ShapeType() == TopAbs_VERTEX)
{
myMap.RemoveFromIndex(1);
}
if (!myMap.IsEmpty() && myMap.FindKey(myMap.Extent()).ShapeType() == TopAbs_VERTEX)
myMap.RemoveLast();
}
#ifdef OCCT_DEBUG
#ifdef DRAW
if (AffichEdge)
{
std::cout << " End Construction of geometric primitives " << std::endl;
}
#endif
#endif
//---------------------------------------------------
// Construction of offset vertices.
//---------------------------------------------------
BRepFill_DataMapOfOrientedShapeListOfShape Detromp;
Handle(MAT_Arc) CurrentArc;
Handle(Geom2d_Curve) Bis, PCurve1, PCurve2;
Handle(Geom_Curve) CBis;
Standard_Boolean Reverse;
TopoDS_Edge CurrentEdge;
TopoDS_Shape S[2];
TopoDS_Edge E[2];
TopLoc_Location L;
Standard_Integer j, k;
for (Standard_Integer i = 1; i <= Locus.Graph()->NumberOfArcs(); i++)
{
CurrentArc = Locus.Graph()->Arc(i);
Bisector_Bisec Bisec = Locus.GeomBis(CurrentArc, Reverse);
#ifdef OCCT_DEBUG
#ifdef DRAW
if (AffichGeom)
{
char name[256];
sprintf(name, "BISSEC_%d", NbBISSEC++);
DrawTrSurf::Set(name, Bisec.Value());
}
#endif
#endif
//-------------------------------------------------------------------
// Return elements of the spine corresponding to separate basicElts.
//-------------------------------------------------------------------
S[0] = Link.GeneratingShape(CurrentArc->FirstElement());
S[1] = Link.GeneratingShape(CurrentArc->SecondElement());
TopTools_SequenceOfShape Vertices;
TColgp_SequenceOfPnt Params;
TopTools_DataMapOfShapeSequenceOfShape MapSeqVer;
BRepFill_DataMapOfShapeSequenceOfPnt MapSeqPar;
//-----------------------------------------------------------
// Return parallel edges on each face.
// If no offset generated => move to the next bissectrice.
//--------------------------------------------------------------
if (myMap.Contains(S[0]) && myMap.Contains(S[1]))
{
E[0] = TopoDS::Edge(myMap.FindFromKey(S[0]).First());
E[1] = TopoDS::Edge(myMap.FindFromKey(S[1]).First());
}
else
continue;
//-----------------------------------------------------------
// Construction of vertices corresponding to the node of the map.
// if they are on the offset.
//-----------------------------------------------------------
TopoDS_Vertex VS, VE;
Handle(MAT_Node) Node1, Node2;
if (Reverse)
{
Node1 = CurrentArc->SecondNode();
Node2 = CurrentArc->FirstNode();
}
else
{
Node1 = CurrentArc->FirstNode();
Node2 = CurrentArc->SecondNode();
}
Standard_Boolean StartOnEdge = 0, EndOnEdge = 0;
if (!Node1->Infinite())
{
gp_Pnt2d aLocalPnt2d = Locus.GeomElt(Node1);
StartOnEdge = VertexFromNode(Node1, myOffset, aLocalPnt2d, MapNodeVertex, VS);
// StartOnEdge = VertexFromNode(Node1, myOffset, Locus.GeomElt(Node1),
// MapNodeVertex,VS);
}
if (!Node2->Infinite())
{
gp_Pnt2d aLocalPnt2d = Locus.GeomElt(Node2);
EndOnEdge = VertexFromNode(Node2, myOffset, aLocalPnt2d, MapNodeVertex, VE);
// EndOnEdge = VertexFromNode(Node2, myOffset, Locus.GeomElt(Node2),
// MapNodeVertex,VE);
}
if (myJoinType == GeomAbs_Intersection)
StartOnEdge = EndOnEdge = 0;
//---------------------------------------------
// Construction of geometries.
//---------------------------------------------
BRepFill_TrimEdgeTool Trim(Bisec,
Locus.GeomElt(CurrentArc->FirstElement()),
Locus.GeomElt(CurrentArc->SecondElement()),
myOffset);
//-----------------------------------------------------------
// Construction of vertices on edges parallel to the spine.
//-----------------------------------------------------------
Trim
.IntersectWith(E[0], E[1], S[0], S[1], Ends[0], Ends[1], myJoinType, myIsOpenResult, Params);
for (Standard_Integer s = 1; s <= Params.Length(); s++)
{
TopoDS_Vertex VC;
myBuilder.MakeVertex(VC);
gp_Pnt2d P2 = Bisec.Value()->Value(Params.Value(s).X());
gp_Pnt PVC(P2.X(), P2.Y(), 0.);
myBuilder.UpdateVertex(VC, PVC, Precision::Confusion());
Vertices.Append(VC);
}
if (StartOnEdge)
{
Standard_Boolean Start = 1;
Trim.AddOrConfuse(Start, E[0], E[1], Params);
if (Params.Length() == Vertices.Length() && Params.Length() != 0)
Vertices.SetValue(1, VS);
else
// the point was not found by IntersectWith
Vertices.Prepend(VS);
}
if (EndOnEdge)
{
Standard_Boolean Start = 0;
Trim.AddOrConfuse(Start, E[0], E[1], Params);
if (Params.Length() == Vertices.Length() && Params.Length() != 0)
Vertices.SetValue(Params.Length(), VE);
else
// the point was not found by IntersectWith
Vertices.Append(VE);
}
//------------------------------------------------------------
// Update Detromp.
// Detromp allows to remove vertices on the offset
// corresponding to tangency zones
// Detromp ranks the vertices that limit
// the parts of the bissectrices located between the spine and the
// offset.
//------------------------------------------------------------
if (!Detromp.IsBound(S[0]))
Detromp.Bind(S[0], EmptyList);
if (!Detromp.IsBound(S[1]))
Detromp.Bind(S[1], EmptyList);
UpdateDetromp(Detromp, S[0], S[1], Vertices, Params, Bisec, StartOnEdge, EndOnEdge, Trim);
//----------------------------------------------
// Storage of vertices on parallel edges.
// fill MapBis and MapVerPar.
//----------------------------------------------
if (!Vertices.IsEmpty() && Params.Length() == Vertices.Length())
{
for (k = 0; k <= 1; k++)
{
if (!MapBis.IsBound(E[k]))
{
MapBis.Bind(E[k], EmptySeq);
MapVerPar.Bind(E[k], EmptySeqOfReal);
}
for (Standard_Integer ii = 1; ii <= Vertices.Length(); ii++)
{
MapBis(E[k]).Append(Vertices.Value(ii));
if (k == 0)
MapVerPar(E[k]).Append(Params.Value(ii).Y());
else
MapVerPar(E[k]).Append(Params.Value(ii).Z());
}
}
}
else
{
//------------------------------------------------------------
// FOR COMPLETE CIRCLES. the parallel line can be contained
// in the zone without intersection with the border
// no intersection
// if myoffset is < distance of nodes the parallel can be valid.
//-------------------------------------------------------------
for (k = 0; k <= 1; k++)
{
if (!MapBis.IsBound(E[k]))
{
if (Node1->Distance() > myOffset && Node2->Distance() > myOffset)
{
MapBis.Bind(E[k], EmptySeq);
MapVerPar.Bind(E[k], EmptySeqOfReal);
}
}
}
}
}
#ifdef OCCT_DEBUG
#ifdef DRAW
if (AffichEdge)
{
std::cout << " End Construction of vertices on offsets" << std::endl;
}
#endif
#endif
//----------------------------------
// Construction of parallel edges.
//----------------------------------
TopTools_IndexedDataMapOfShapeShape MapVV;
TopoDS_Shape CurrentSpine;
// BRepFill_DataMapIteratorOfDataMapOfOrientedShapeListOfShape ite1;
for (j = 1; j <= myMap.Extent(); j++)
{
CurrentSpine = myMap.FindKey(j);
CurrentEdge = TopoDS::Edge(myMap(j).First());
myMap(j).Clear();
if (MapBis.IsBound(CurrentEdge))
{
TopTools_SequenceOfShape aSeqOfShape;
if (!MapBis(CurrentEdge).IsEmpty())
{
Standard_Integer IndOfE = 0;
if (myIsOpenResult)
{
if (j == 1)
IndOfE = 1;
else if (j == myMap.Extent())
IndOfE = -1;
}
TrimEdge(CurrentEdge,
CurrentSpine,
mySpine,
Detromp(CurrentSpine),
MapBis(CurrentEdge),
MapVerPar(CurrentEdge),
aSeqOfShape,
MapVV,
IndOfE);
for (k = 1; k <= aSeqOfShape.Length(); k++)
{
myMap(j).Append(aSeqOfShape.Value(k));
}
}
else
{
//-----------------
// Complete circles
//-----------------
myMap(j).Append(CurrentEdge);
}
}
}
Standard_Integer ind;
for (ind = 1; ind <= MapVV.Extent(); ind++)
{
TopoDS_Vertex OldV = TopoDS::Vertex(MapVV.FindKey(ind));
TopoDS_Vertex NewV = TopoDS::Vertex(MapVV(ind));
gp_Pnt P1 = BRep_Tool::Pnt(OldV);
gp_Pnt P2 = BRep_Tool::Pnt(NewV);
myBuilder.UpdateVertex(NewV, P1.Distance(P2));
TopTools_ListOfShape LV;
LV.Append(NewV.Oriented(TopAbs_FORWARD));
BRepTools_Substitution aSubst;
aSubst.Substitute(OldV, LV);
for (j = 1; j <= myMap.Extent(); j++)
{
TopTools_ListIteratorOfListOfShape itl(myMap(j));
for (; itl.More(); itl.Next())
{
aSubst.Build(itl.Value());
if (aSubst.IsCopied(itl.Value()))
{
const TopTools_ListOfShape& listSh = aSubst.Copy(itl.Value());
TopAbs_Orientation SaveOr = itl.Value().Orientation();
itl.ChangeValue() = listSh.First();
itl.ChangeValue().Orientation(SaveOr);
}
}
}
}
//----------------------------------
// Construction of offset wires.
//----------------------------------
MakeWires();
// Update vertices ( Constructed in the plane Z = 0) !!!
TopTools_MapOfShape MapVertex;
for (TopExp_Explorer exp(myShape, TopAbs_VERTEX); exp.More(); exp.Next())
{
TopoDS_Vertex V = TopoDS::Vertex(exp.Current());
if (MapVertex.Add(V))
{
gp_Pnt P = BRep_Tool::Pnt(V);
P = RefPlane->Value(P.X(), P.Y());
myBuilder.UpdateVertex(V, P, Precision::Confusion());
}
}
// Construction of curves 3d.
BRepLib::BuildCurves3d(myShape);
MapVertex.Clear();
TopExp_Explorer Explo(myShape, TopAbs_EDGE);
for (; Explo.More(); Explo.Next())
{
TopoDS_Edge anEdge = TopoDS::Edge(Explo.Current());
TopoDS_Vertex V1, V2;
TopExp::Vertices(anEdge, V1, V2);
Handle(BRep_TVertex)& TV1 = *((Handle(BRep_TVertex)*)&(V1).TShape());
Handle(BRep_TVertex)& TV2 = *((Handle(BRep_TVertex)*)&(V2).TShape());
TopLoc_Location loc;
Standard_Real f, l;
Handle(Geom_Curve) theCurve = BRep_Tool::Curve(anEdge, loc, f, l);
theCurve = Handle(Geom_Curve)::DownCast(theCurve->Copy());
theCurve->Transform(loc.Transformation());
gp_Pnt f3d = theCurve->Value(f);
gp_Pnt l3d = theCurve->Value(l);
Standard_Real dist1, dist2;
dist1 = f3d.Distance(TV1->Pnt());
dist2 = l3d.Distance(TV2->Pnt());
if (!MapVertex.Contains(V1))
{
TV1->Pnt(f3d);
MapVertex.Add(V1);
}
else
TV1->UpdateTolerance(1.5 * dist1);
if (!MapVertex.Contains(V2))
{
TV2->Pnt(l3d);
MapVertex.Add(V2);
}
else
TV2->UpdateTolerance(1.5 * dist2);
}
if (!myIsOpenResult)
FixHoles();
myIsDone = Standard_True;
}
//=================================================================================================
BRepFill_IndexedDataMapOfOrientedShapeListOfShape& BRepFill_OffsetWire::Generated()
{
return myMap;
}
//=================================================================================================
void BRepFill_OffsetWire::PrepareSpine()
{
BRep_Builder B;
TopTools_ListOfShape Cuts;
TopTools_ListIteratorOfListOfShape IteCuts;
TopoDS_Vertex V1, V2;
myWorkSpine.Nullify();
myMapSpine.Clear();
TopLoc_Location L;
const Handle(Geom_Surface)& S = BRep_Tool::Surface(mySpine, L);
Standard_Real TolF = BRep_Tool::Tolerance(mySpine);
B.MakeFace(myWorkSpine, S, L, TolF);
for (TopoDS_Iterator IteF(mySpine); IteF.More(); IteF.Next())
{
TopoDS_Wire NW;
B.MakeWire(NW);
// Modified by Sergey KHROMOV - Thu Nov 16 17:29:55 2000 Begin
Standard_Integer ForcedCut = 0;
Standard_Integer nbResEdges = -1;
TopTools_IndexedMapOfShape EdgeMap;
TopExp::MapShapes(IteF.Value(), TopAbs_EDGE, EdgeMap);
Standard_Integer nbEdges = EdgeMap.Extent();
if (nbEdges == 1 && !myIsOpenResult) // in case of open wire there's no need to do it
ForcedCut = 2;
// Modified by Sergey KHROMOV - Thu Nov 16 17:29:48 2000 End
for (TopoDS_Iterator IteW(IteF.Value()); IteW.More(); IteW.Next())
{
const TopoDS_Edge& E = TopoDS::Edge(IteW.Value());
EdgeVertices(E, V1, V2);
myMapSpine.Bind(V1, V1);
myMapSpine.Bind(V2, V2);
Cuts.Clear();
// Cut
TopoDS_Shape aLocalShape = E.Oriented(TopAbs_FORWARD);
// Modified by Sergey KHROMOV - Thu Nov 16 17:29:29 2000 Begin
Handle(BRep_TEdge) TEdge = Handle(BRep_TEdge)::DownCast(E.TShape());
const Standard_Integer aNumCurvesInEdge = TEdge->Curves().Size();
if (nbEdges == 2 && nbResEdges == 0 && aNumCurvesInEdge > 1)
ForcedCut = 1;
// Modified by Sergey KHROMOV - Thu Nov 16 17:29:33 2000 End
nbResEdges = CutEdge(TopoDS::Edge(aLocalShape), mySpine, ForcedCut, Cuts);
if (Cuts.IsEmpty())
{
B.Add(NW, E);
myMapSpine.Bind(E, E);
}
else
{
for (IteCuts.Initialize(Cuts); IteCuts.More(); IteCuts.Next())
{
TopoDS_Edge NE = TopoDS::Edge(IteCuts.Value());
NE.Orientation(E.Orientation());
B.Add(NW, NE);
myMapSpine.Bind(NE, E);
EdgeVertices(NE, V1, V2);
if (!myMapSpine.IsBound(V1))
myMapSpine.Bind(V1, E);
if (!myMapSpine.IsBound(V2))
myMapSpine.Bind(V2, E);
}
}
}
// Modified by Sergey KHROMOV - Thu Mar 7 09:17:41 2002 Begin
TopoDS_Vertex aV1;
TopoDS_Vertex aV2;
TopExp::Vertices(NW, aV1, aV2);
NW.Closed(aV1.IsSame(aV2));
// Modified by Sergey KHROMOV - Thu Mar 7 09:17:43 2002 End
B.Add(myWorkSpine, NW);
}
#ifdef OCCT_DEBUG
#ifdef DRAW
if (AffichEdge)
{
DBRep::Set("WS", myWorkSpine);
DBRep::Set("MS", mySpine);
BRepTools::Write(myWorkSpine, "WS");
BRepTools::Write(mySpine, "MS");
}
#endif
#endif
}
//=======================================================================
// function : UpdateDetromp
// purpose : For each interval on bissectrice defined by parameters
// test if the medium point is at a distance > offset
// in this case vertices corresponding to the extremities of the interval
// are ranked in the proofing.
// => If the same vertex appears in the proofing, the
// border of the zone of proximity is tangent to the offset .
//=======================================================================
void BRepFill_OffsetWire::UpdateDetromp(BRepFill_DataMapOfOrientedShapeListOfShape& Detromp,
const TopoDS_Shape& Shape1,
const TopoDS_Shape& Shape2,
const TopTools_SequenceOfShape& Vertices,
const TColgp_SequenceOfPnt& Params,
const Bisector_Bisec& Bisec,
const Standard_Boolean SOnE,
const Standard_Boolean EOnE,
const BRepFill_TrimEdgeTool& Trim) const
{
Standard_Integer ii = 1;
if (myJoinType == GeomAbs_Intersection)
{
for (; ii <= Vertices.Length(); ii++)
{
const TopoDS_Vertex& aVertex = TopoDS::Vertex(Vertices.Value(ii));
Detromp(Shape1).Append(aVertex);
Detromp(Shape2).Append(aVertex);
}
}
else // myJoinType == GeomAbs_Arc
{
Standard_Real U1, U2;
TopoDS_Vertex V1, V2;
const Handle(Geom2d_Curve)& Bis = Bisec.Value();
Standard_Boolean ForceAdd = Standard_False;
Handle(Geom2d_TrimmedCurve) aTC = Handle(Geom2d_TrimmedCurve)::DownCast(Bis);
if (!aTC.IsNull() && aTC->BasisCurve()->IsPeriodic())
{
gp_Pnt2d Pf = Bis->Value(Bis->FirstParameter());
gp_Pnt2d Pl = Bis->Value(Bis->LastParameter());
ForceAdd = Pf.Distance(Pl) <= Precision::Confusion();
}
U1 = Bis->FirstParameter();
if (SOnE)
{
// the first point of the bissectrice is on the offset
V1 = TopoDS::Vertex(Vertices.Value(ii));
ii++;
}
while (ii <= Vertices.Length() && ii <= Params.Length())
{
U2 = Params.Value(ii).X();
V2 = TopoDS::Vertex(Vertices.Value(ii));
gp_Pnt2d P = Bis->Value((U2 + U1) * 0.5);
if (!Trim.IsInside(P) || ForceAdd)
{
if (!V1.IsNull())
{
Detromp(Shape1).Append(V1);
Detromp(Shape2).Append(V1);
}
Detromp(Shape1).Append(V2);
Detromp(Shape2).Append(V2);
}
U1 = U2;
V1 = V2;
ii++;
}
// test medium point between the last parameter and the end of the bissectrice.
U2 = Bis->LastParameter();
if (!EOnE)
{
if (!Precision::IsInfinite(U2))
{
gp_Pnt2d P = Bis->Value((U2 + U1) * 0.5);
if (!Trim.IsInside(P) || ForceAdd)
{
if (!V1.IsNull())
{
Detromp(Shape1).Append(V1);
Detromp(Shape2).Append(V1);
}
}
}
else
{
if (!V1.IsNull())
{
Detromp(Shape1).Append(V1);
Detromp(Shape2).Append(V1);
}
}
}
// else if(myJoinType != GeomAbs_Arc)
//{
// if (!V1.IsNull()) {
// Detromp(Shape1).Append(V1);
// Detromp(Shape2).Append(V1);
// }
// }
} // end of else (myJoinType==GeomAbs_Arc)
}
//=================================================================================================
void BRepFill_OffsetWire::MakeWires()
{
//--------------------------------------------------------
// creation of a single list of created parallel edges.
//--------------------------------------------------------
TopTools_SequenceOfShape TheEdges;
TopTools_ListOfShape TheWires;
TopTools_ListIteratorOfListOfShape itl;
// BRepFill_DataMapIteratorOfDataMapOfOrientedShapeListOfShape ite;
TopTools_IndexedDataMapOfShapeListOfShape MVE;
// TopTools_DataMapIteratorOfDataMapOfShapeListOfShape MVEit;
TopoDS_Vertex V1, V2, VF, CV;
Standard_Integer i;
for (i = 1; i <= myMap.Extent(); i++)
{
for (itl.Initialize(myMap(i)); itl.More(); itl.Next())
{
const TopoDS_Edge& E = TopoDS::Edge(itl.Value());
TopExp::Vertices(E, V1, V2);
if (V1.IsSame(V2) && IsSmallClosedEdge(E, V1))
continue; // remove small closed edges
if (!CheckSmallParamOnEdge(E))
continue;
if (!MVE.Contains(V1))
{
TopTools_ListOfShape empty;
MVE.Add(V1, empty);
}
MVE.ChangeFromKey(V1).Append(E);
if (!MVE.Contains(V2))
{
TopTools_ListOfShape empty;
MVE.Add(V2, empty);
}
MVE.ChangeFromKey(V2).Append(E);
}
}
//--------------------------------------
// Creation of parallel wires.
//--------------------------------------
BRep_Builder B;
// Standard_Integer NbEdges;
// Standard_Boolean NewWire = Standard_True;
// Standard_Boolean AddEdge = Standard_False;
TopoDS_Wire NW;
Standard_Boolean End;
TopoDS_Edge CE;
while (!MVE.IsEmpty())
{
B.MakeWire(NW);
// MVEit.Initialize(MVE);
for (i = 1; i <= MVE.Extent(); i++)
if (MVE(i).Extent() == 1)
break;
// if(!MVEit.More()) MVEit.Initialize(MVE);
if (i > MVE.Extent())
i = 1;
CV = VF = TopoDS::Vertex(MVE.FindKey(i));
CE = TopoDS::Edge(MVE(i).First());
End = Standard_False;
MVE.ChangeFromKey(CV).RemoveFirst();
if (myIsOpenResult && MVE.FindFromKey(CV).IsEmpty())
{
MVE.RemoveKey(CV);
}
// Modified by Sergey KHROMOV - Thu Mar 14 11:29:59 2002 Begin
Standard_Boolean isClosed = Standard_False;
// Modified by Sergey KHROMOV - Thu Mar 14 11:30:00 2002 End
while (!End)
{
//-------------------------------
// Construction of a wire.
//-------------------------------
TopExp::Vertices(CE, V1, V2);
if (!CV.IsSame(V1))
CV = V1;
else
CV = V2;
B.Add(NW, CE);
if (VF.IsSame(CV) || !MVE.Contains(CV))
{
// Modified by Sergey KHROMOV - Thu Mar 14 11:30:14 2002 Begin
isClosed = VF.IsSame(CV);
// Modified by Sergey KHROMOV - Thu Mar 14 11:30:15 2002 End
End = Standard_True;
MVE.RemoveKey(VF);
}
if (!End)
{
if (MVE.FindFromKey(CV).Extent() > 2)
{
// std::cout <<"vertex on more that 2 edges in a face."<<std::endl;
}
for (itl.Initialize(MVE.FindFromKey(CV)); itl.More(); itl.Next())
{
if (itl.Value().IsSame(CE))
{
MVE.ChangeFromKey(CV).Remove(itl);
break;
}
}
if (!MVE.FindFromKey(CV).IsEmpty())
{
CE = TopoDS::Edge(MVE.FindFromKey(CV).First());
MVE.ChangeFromKey(CV).RemoveFirst();
}
else if (myIsOpenResult) // CV was a vertex with one edge
End = Standard_True;
if (MVE.FindFromKey(CV).IsEmpty())
{
MVE.RemoveKey(CV);
}
}
}
// Modified by Sergey KHROMOV - Thu Mar 14 11:29:31 2002 Begin
// NW.Closed(Standard_True);
NW.Closed(isClosed);
// Modified by Sergey KHROMOV - Thu Mar 14 11:29:37 2002 End
TheWires.Append(NW);
}
// update myShape :
// -- if only one wire : myShape is a Wire
// -- if several wires : myShape is a Compound.
if (TheWires.Extent() == 1)
{
myShape = TheWires.First();
}
else
{
TopoDS_Compound R;
B.MakeCompound(R);
TopTools_ListIteratorOfListOfShape it(TheWires);
for (; it.More(); it.Next())
{
B.Add(R, it.Value());
}
myShape = R;
}
}
//=================================================================================================
void BRepFill_OffsetWire::FixHoles()
{
TopTools_SequenceOfShape ClosedWires, UnclosedWires, IsolatedWires;
Standard_Real MaxTol = 0.;
BRep_Builder BB;
TopExp_Explorer Explo(mySpine, TopAbs_VERTEX);
for (; Explo.More(); Explo.Next())
{
const TopoDS_Vertex& aVertex = TopoDS::Vertex(Explo.Current());
Standard_Real Tol = BRep_Tool::Tolerance(aVertex);
if (Tol > MaxTol)
MaxTol = Tol;
}
MaxTol *= 100.;
Explo.Init(myShape, TopAbs_WIRE);
for (; Explo.More(); Explo.Next())
{
TopoDS_Shape aWire = Explo.Current();
// Remove duplicated edges
TopTools_DataMapOfShapeListOfShape EEmap;
TopoDS_Iterator it(aWire);
for (; it.More(); it.Next())
{
const TopoDS_Shape& anEdge = it.Value();
if (!EEmap.IsBound(anEdge))
{
TopTools_ListOfShape LE;
EEmap.Bind(anEdge, LE);
}
else
EEmap(anEdge).Append(anEdge);
}
aWire.Free(Standard_True);
TopTools_DataMapIteratorOfDataMapOfShapeListOfShape mapit(EEmap);
for (; mapit.More(); mapit.Next())
{
const TopTools_ListOfShape& LE = mapit.Value();
TopTools_ListIteratorOfListOfShape itl(LE);
for (; itl.More(); itl.Next())
BB.Remove(aWire, itl.Value());
}
// Sorting
if (aWire.Closed())
ClosedWires.Append(aWire);
else
UnclosedWires.Append(aWire);
}
while (!UnclosedWires.IsEmpty())
{
TopoDS_Wire& Base = TopoDS::Wire(UnclosedWires(1));
TopoDS_Vertex Vf, Vl;
TopExp::Vertices(Base, Vf, Vl);
if (Vf.IsNull() || Vl.IsNull())
{
throw Standard_Failure("BRepFill_OffsetWire::FixHoles(): Wrong wire.");
}
gp_Pnt Pf, Pl;
Pf = BRep_Tool::Pnt(Vf);
Pl = BRep_Tool::Pnt(Vl);
Standard_Real DistF = RealLast(), DistL = RealLast();
Standard_Integer IndexF = 0, IndexL = 0;
Standard_Boolean IsFirstF = Standard_False, IsFirstL = Standard_False;
for (Standard_Integer i = 2; i <= UnclosedWires.Length(); i++)
{
TopoDS_Wire aWire = TopoDS::Wire(UnclosedWires(i));
TopoDS_Vertex V1, V2;
TopExp::Vertices(aWire, V1, V2);
if (V1.IsNull() || V2.IsNull())
{
throw Standard_Failure("BRepFill_OffsetWire::FixHoles(): Wrong wire.");
}
gp_Pnt P1, P2;
P1 = BRep_Tool::Pnt(V1);
P2 = BRep_Tool::Pnt(V2);
Standard_Real dist = Pf.Distance(P1);
if (dist < DistF)
{
DistF = dist;
IndexF = i;
IsFirstF = Standard_True;
}
dist = Pf.Distance(P2);
if (dist < DistF)
{
DistF = dist;
IndexF = i;
IsFirstF = Standard_False;
}
dist = Pl.Distance(P1);
if (dist < DistL)
{
DistL = dist;
IndexL = i;
IsFirstL = Standard_True;
}
dist = Pl.Distance(P2);
if (dist < DistL)
{
DistL = dist;
IndexL = i;
IsFirstL = Standard_False;
}
}
if (DistF > MaxTol)
IndexF = 0;
if (DistL > MaxTol)
IndexL = 0;
TopoDS_Wire theWire;
TopoDS_Edge theEdge;
TopoDS_Vertex theVertex;
Standard_Real CommonTol;
Standard_Boolean TryToClose = Standard_True;
if (DistF <= MaxTol && DistL <= MaxTol && IndexF == IndexL && IsFirstF == IsFirstL)
{
if (DistF < DistL)
{
DistL = RealLast();
IndexL++;
}
else
{
DistF = RealLast();
IndexF++;
}
TryToClose = Standard_False;
}
if (DistF <= MaxTol)
{
theWire = TopoDS::Wire(UnclosedWires(IndexF));
TopoDS_Vertex V1, V2;
TopExp::Vertices(theWire, V1, V2);
TopTools_IndexedDataMapOfShapeListOfShape VEmap;
TopExp::MapShapesAndAncestors(theWire, TopAbs_VERTEX, TopAbs_EDGE, VEmap);
theEdge = (IsFirstF) ? TopoDS::Edge(VEmap.FindFromKey(V1).First())
: TopoDS::Edge(VEmap.FindFromKey(V2).First());
TopoDS_Iterator it(theWire);
for (; it.More(); it.Next())
{
TopoDS_Edge anEdge = TopoDS::Edge(it.Value());
if (IsFirstF)
anEdge.Reverse();
if (!anEdge.IsSame(theEdge))
BB.Add(Base, anEdge);
}
theVertex = (IsFirstF) ? V1 : V2;
CommonTol = Max(BRep_Tool::Tolerance(Vf), BRep_Tool::Tolerance(theVertex));
if (DistF <= CommonTol)
{
theEdge.Free(Standard_True);
Vf.Orientation(theVertex.Orientation());
BB.Remove(theEdge, theVertex);
BB.Add(theEdge, Vf);
BB.UpdateVertex(Vf, CommonTol);
if (IsFirstF)
theEdge.Reverse();
BB.Add(Base, theEdge);
}
else
{
if (IsFirstF)
theEdge.Reverse();
BB.Add(Base, theEdge);
// Creating new edge from theVertex to Vf
TopoDS_Edge NewEdge = BRepLib_MakeEdge(theVertex, Vf);
BB.Add(Base, NewEdge);
}
}
if (DistL <= MaxTol && IndexL != IndexF)
{
theWire = TopoDS::Wire(UnclosedWires(IndexL));
TopoDS_Vertex V1, V2;
TopExp::Vertices(theWire, V1, V2);
TopTools_IndexedDataMapOfShapeListOfShape VEmap;
TopExp::MapShapesAndAncestors(theWire, TopAbs_VERTEX, TopAbs_EDGE, VEmap);
theEdge = (IsFirstL) ? TopoDS::Edge(VEmap.FindFromKey(V1).First())
: TopoDS::Edge(VEmap.FindFromKey(V2).First());
TopoDS_Iterator it(theWire);
for (; it.More(); it.Next())
{
TopoDS_Edge anEdge = TopoDS::Edge(it.Value());
if (!IsFirstL)
anEdge.Reverse();
if (!anEdge.IsSame(theEdge))
BB.Add(Base, anEdge);
}
theVertex = (IsFirstL) ? V1 : V2;
CommonTol = Max(BRep_Tool::Tolerance(Vl), BRep_Tool::Tolerance(theVertex));
if (DistL <= CommonTol)
{
theEdge.Free(Standard_True);
Vl.Orientation(theVertex.Orientation());
BB.Remove(theEdge, theVertex);
BB.Add(theEdge, Vl);
BB.UpdateVertex(Vl, CommonTol);
if (!IsFirstL)
theEdge.Reverse();
BB.Add(Base, theEdge);
}
else
{
if (!IsFirstL)
theEdge.Reverse();
BB.Add(Base, theEdge);
// Creating new edge from Vl to theVertex
TopoDS_Edge NewEdge = BRepLib_MakeEdge(Vl, theVertex);
BB.Add(Base, NewEdge);
}
}
// Check if it is possible to close resulting wire
if (TryToClose)
{
TopExp::Vertices(Base, Vf, Vl);
CommonTol = Max(BRep_Tool::Tolerance(Vf), BRep_Tool::Tolerance(Vl));
TopTools_IndexedDataMapOfShapeListOfShape VEmap;
TopExp::MapShapesAndAncestors(Base, TopAbs_VERTEX, TopAbs_EDGE, VEmap);
TopoDS_Edge Efirst, Elast;
Efirst = TopoDS::Edge(VEmap.FindFromKey(Vf).First());
Elast = TopoDS::Edge(VEmap.FindFromKey(Vl).First());
Pf = BRep_Tool::Pnt(Vf);
Pl = BRep_Tool::Pnt(Vl);
Standard_Real Dist = Pf.Distance(Pl);
if (Dist <= CommonTol)
{
Elast.Free(Standard_True);
Vf.Orientation(Vl.Orientation());
BB.Remove(Elast, Vl);
BB.Add(Elast, Vf);
BB.UpdateVertex(Vf, CommonTol);
Base.Closed(Standard_True);
}
else if (Dist <= MaxTol)
{
// Creating new edge from Vl to Vf
TopoDS_Edge NewEdge = BRepLib_MakeEdge(Vf, Vl);
BB.Add(Base, NewEdge);
Base.Closed(Standard_True);
}
}
// Updating sequences ClosedWires and UnclosedWires
if (DistF <= MaxTol)
UnclosedWires.Remove(IndexF);
if (DistL <= MaxTol && IndexL != IndexF)
{
if (DistF <= MaxTol && IndexL > IndexF)
IndexL--;
UnclosedWires.Remove(IndexL);
}
if (Base.Closed())
{
ClosedWires.Append(Base);
UnclosedWires.Remove(1);
}
else if (DistF > MaxTol && DistL > MaxTol)
{
IsolatedWires.Append(Base);
UnclosedWires.Remove(1);
}
}
// Updating myShape
if (ClosedWires.Length() + IsolatedWires.Length() == 1)
{
if (!ClosedWires.IsEmpty())
myShape = ClosedWires.First();
else
myShape = IsolatedWires.First();
}
else
{
TopoDS_Compound R;
BB.MakeCompound(R);
Standard_Integer i;
for (i = 1; i <= ClosedWires.Length(); i++)
BB.Add(R, ClosedWires(i));
for (i = 1; i <= IsolatedWires.Length(); i++)
BB.Add(R, IsolatedWires(i));
myShape = R;
}
}
//=======================================================================
// function : CutEdge
// purpose : Cut edge at the extrema of curvatures and points of inflexion.
// So, closed circles are cut in two.
// If <Cuts> is empty, the edge is not modified.
// The first and the last vertex of the initial edge
// belong to the first and the last parts respectively.
//=======================================================================
Standard_Integer CutEdge(const TopoDS_Edge& E,
const TopoDS_Face& F,
Standard_Integer ForceCut,
TopTools_ListOfShape& Cuts)
{
Cuts.Clear();
MAT2d_CutCurve Cuter;
TColGeom2d_SequenceOfCurve theCurves;
Standard_Real f, l;
Handle(Geom2d_Curve) C2d;
Handle(Geom2d_TrimmedCurve) CT2d;
// Modified by Sergey KHROMOV - Wed Mar 6 17:36:25 2002 Begin
Standard_Real aTol = BRep_Tool::Tolerance(E);
Handle(Geom_Curve) aC;
// Modified by Sergey KHROMOV - Wed Mar 6 17:36:25 2002 End
TopoDS_Vertex V1, V2, VF, VL;
TopExp::Vertices(E, V1, V2);
BRep_Builder B;
C2d = BRep_Tool::CurveOnSurface(E, F, f, l);
// Modified by Sergey KHROMOV - Wed Mar 6 17:36:54 2002 Begin
aC = BRep_Tool::Curve(E, f, l);
// Modified by Sergey KHROMOV - Wed Mar 6 17:36:54 2002 End
CT2d = new Geom2d_TrimmedCurve(C2d, f, l);
// if (E.Orientation() == TopAbs_REVERSED) CT2d->Reverse();
if (CT2d->BasisCurve()->IsKind(STANDARD_TYPE(Geom2d_Circle)) && (Abs(f - l) >= M_PI))
{
return 0;
}
//-------------------------
// Cut curve.
//-------------------------
Cuter.Perform(CT2d);
// Modified by Sergey KHROMOV - Thu Nov 16 17:28:29 2000 Begin
if (ForceCut == 0)
{
if (Cuter.UnModified())
{
//-----------------------------
// edge not modified => return.
//-----------------------------
return 0;
}
else
{
for (Standard_Integer k = 1; k <= Cuter.NbCurves(); k++)
theCurves.Append(Cuter.Value(k));
}
}
else if (ForceCut == 1)
{
if (Cuter.UnModified())
{
CutCurve(CT2d, 2, theCurves);
}
else
{
for (Standard_Integer k = 1; k <= Cuter.NbCurves(); k++)
theCurves.Append(Cuter.Value(k));
}
}
else if (ForceCut == 2)
{
if (Cuter.UnModified())
{
CutCurve(CT2d, 3, theCurves);
}
else
{
if (Cuter.NbCurves() == 2)
{
Handle(Geom2d_TrimmedCurve) CC = Cuter.Value(1);
if (CC->LastParameter() > (l + f) / 2.)
{
CutCurve(CC, 2, theCurves);
theCurves.Append(Cuter.Value(2));
}
else
{
theCurves.Append(CC);
CutCurve(Cuter.Value(2), 2, theCurves);
}
}
else
{
for (Standard_Integer k = 1; k <= Cuter.NbCurves(); k++)
theCurves.Append(Cuter.Value(k));
}
}
}
// Modified by Sergey KHROMOV - Thu Nov 16 17:28:37 2000 End
//--------------------------------------
// Creation of cut edges.
//--------------------------------------
VF = V1;
for (Standard_Integer k = 1; k <= theCurves.Length(); k++)
{
Handle(Geom2d_TrimmedCurve) CC = Handle(Geom2d_TrimmedCurve)::DownCast(theCurves.Value(k));
if (k == theCurves.Length())
{
VL = V2;
}
else
{
// Modified by Sergey KHROMOV - Wed Mar 6 17:38:02 2002 Begin
gp_Pnt P = aC->Value(CC->LastParameter());
VL = BRepLib_MakeVertex(P);
B.UpdateVertex(VL, aTol);
// Modified by Sergey KHROMOV - Wed Mar 6 17:38:05 2002 End
}
TopoDS_Shape aLocalShape = E.EmptyCopied();
TopoDS_Edge NE = TopoDS::Edge(aLocalShape);
// TopoDS_Edge NE = TopoDS::Edge(E.EmptyCopied());
NE.Orientation(TopAbs_FORWARD);
B.Add(NE, VF.Oriented(TopAbs_FORWARD));
B.Add(NE, VL.Oriented(TopAbs_REVERSED));
B.Range(NE, CC->FirstParameter(), CC->LastParameter());
Cuts.Append(NE.Oriented(E.Orientation()));
VF = VL;
}
return theCurves.Length();
}
// Modified by Sergey KHROMOV - Thu Nov 16 17:27:56 2000 Begin
//=================================================================================================
void CutCurve(const Handle(Geom2d_TrimmedCurve)& C,
const Standard_Integer nbParts,
TColGeom2d_SequenceOfCurve& theCurves)
{
Handle(Geom2d_TrimmedCurve) TrimC;
Standard_Real UF, UL, UC;
Standard_Real Step;
gp_Pnt2d PF, PL, PC;
constexpr Standard_Real PTol = Precision::PConfusion() * 10;
constexpr Standard_Real Tol = Precision::Confusion() * 10;
Standard_Boolean YaCut = Standard_False;
UF = C->FirstParameter();
UL = C->LastParameter();
PF = C->Value(UF);
PL = C->Value(UL);
Step = (UL - UF) / nbParts;
for (Standard_Integer i = 1; i < nbParts; i++)
{
UC = UF + i * Step;
PC = C->Value(UC);
if (UC - UF > PTol && PC.Distance(PF) > Tol)
{
if (UL - UC < PTol || PL.Distance(PC) < Tol)
continue;
TrimC = new Geom2d_TrimmedCurve(C, UF, UC);
theCurves.Append(TrimC);
UF = UC;
PF = PC;
YaCut = Standard_True;
}
}
if (YaCut)
{
TrimC = new Geom2d_TrimmedCurve(C, UF, UL);
theCurves.Append(TrimC);
}
else
theCurves.Append(C);
}
// Modified by Sergey KHROMOV - Thu Nov 16 17:28:13 2000 End
//=================================================================================================
void MakeCircle(const TopoDS_Edge& E,
const TopoDS_Vertex& V,
const TopoDS_Face& F,
const Standard_Real Offset,
BRepFill_IndexedDataMapOfOrientedShapeListOfShape& Map,
const Handle(Geom_Plane)& RefPlane)
{
// evaluate the Axis of the Circle.
Standard_Real f, l;
Handle(Geom2d_Curve) GC = BRep_Tool::CurveOnSurface(E, F, f, l);
gp_Vec2d DX;
gp_Pnt2d P;
if (E.Orientation() == TopAbs_FORWARD)
{
GC->D1(l, P, DX);
DX.Reverse();
}
else
GC->D1(f, P, DX);
gp_Ax2d Axis(P, gp_Dir2d(DX));
Handle(Geom2d_Circle) Circ = new Geom2d_Circle(Axis, Abs(Offset), Offset < 0.);
// Bind the edges in my Map.
TopoDS_Edge OE = BRepLib_MakeEdge(Circ, RefPlane);
TopTools_ListOfShape LL;
LL.Append(OE);
Map.Add(V, LL);
#ifdef OCCT_DEBUG
#ifdef DRAW
if (AffichGeom && !OE.IsNull())
{
char name[256];
sprintf(name, "OFFSET_%d", ++NbOFFSET);
DBRep::Set(name, OE);
}
#endif
#endif
}
//=================================================================================================
void MakeOffset(const TopoDS_Edge& E,
const TopoDS_Face& F,
const Standard_Real Offset,
BRepFill_IndexedDataMapOfOrientedShapeListOfShape& Map,
const Handle(Geom_Plane)& RefPlane,
const Standard_Boolean IsOpenResult,
const GeomAbs_JoinType theJoinType,
const TopoDS_Vertex* Ends)
{
Standard_Real f, l;
Standard_Real anOffset = Offset;
if (E.Orientation() == TopAbs_FORWARD)
anOffset *= -1;
Handle(Geom2d_Curve) G2d = BRep_Tool::CurveOnSurface(E, F, f, l);
Handle(Geom2d_Curve) G2dOC;
Standard_Boolean ToExtendFirstPar = Standard_True;
Standard_Boolean ToExtendLastPar = Standard_True;
if (IsOpenResult)
{
TopoDS_Vertex V1, V2;
TopExp::Vertices(E, V1, V2);
if (V1.IsSame(Ends[0]) || V1.IsSame(Ends[1]))
ToExtendFirstPar = Standard_False;
if (V2.IsSame(Ends[0]) || V2.IsSame(Ends[1]))
ToExtendLastPar = Standard_False;
}
Geom2dAdaptor_Curve AC(G2d, f, l);
if (AC.GetType() == GeomAbs_Circle)
{
// if the offset is greater otr equal to the radius and the side of the
// concavity of the circle => edge null.
gp_Circ2d C1(AC.Circle());
gp_Ax22d axes(C1.Axis());
gp_Dir2d Xd = axes.XDirection();
gp_Dir2d Yd = axes.YDirection();
Standard_Real Crossed = Xd.X() * Yd.Y() - Xd.Y() * Yd.X();
Standard_Real Signe = (Crossed > 0.) ? -1. : 1.;
if (anOffset * Signe < AC.Circle().Radius() - Precision::Confusion())
{
Handle(Geom2dAdaptor_Curve) AHC = new Geom2dAdaptor_Curve(G2d);
Adaptor2d_OffsetCurve Off(AHC, anOffset);
Handle(Geom2d_Circle) CC = new Geom2d_Circle(Off.Circle());
Standard_Real Delta = 2 * M_PI - l + f;
if (theJoinType == GeomAbs_Arc)
{
if (ToExtendFirstPar)
f -= 0.2 * Delta;
if (ToExtendLastPar)
l += 0.2 * Delta;
}
else // GeomAbs_Intersection
{
if (ToExtendFirstPar && ToExtendLastPar)
{
Standard_Real old_l = l;
f = old_l + Delta / 2.;
l = f + 2 * M_PI;
}
else if (ToExtendFirstPar)
{
f = l;
l = f + 2 * M_PI;
}
else if (ToExtendLastPar)
{
l = f + 2 * M_PI;
}
}
G2dOC = new Geom2d_TrimmedCurve(CC, f, l);
}
}
else if (AC.GetType() == GeomAbs_Line)
{
Handle(Geom2dAdaptor_Curve) AHC = new Geom2dAdaptor_Curve(G2d);
Adaptor2d_OffsetCurve Off(AHC, anOffset);
Handle(Geom2d_Line) CC = new Geom2d_Line(Off.Line());
Standard_Real Delta = (l - f);
if (ToExtendFirstPar)
{
if (theJoinType == GeomAbs_Arc)
f -= Delta;
else // GeomAbs_Intersection
f = -Precision::Infinite();
}
if (ToExtendLastPar)
{
if (theJoinType == GeomAbs_Arc)
l += Delta;
else // GeomAbs_Intersection
l = Precision::Infinite();
}
G2dOC = new Geom2d_TrimmedCurve(CC, f, l);
}
else
{
Handle(Geom2d_TrimmedCurve) G2dT = new Geom2d_TrimmedCurve(G2d, f, l);
G2dOC = new Geom2d_OffsetCurve(G2dT, anOffset);
}
// Bind the edges in my Map.
if (!G2dOC.IsNull())
{
TopoDS_Edge OE = BRepLib_MakeEdge(G2dOC, RefPlane);
OE.Orientation(E.Orientation());
TopTools_ListOfShape LL;
LL.Append(OE);
Map.Add(E, LL);
#ifdef OCCT_DEBUG
#ifdef DRAW
if (AffichGeom && !OE.IsNull())
{
char name[256];
sprintf(name, "OFFSET_%d", ++NbOFFSET);
DBRep::Set(name, OE);
// Standard_Real ii = 0;
}
#endif
#endif
}
}
//=================================================================================================
Standard_Boolean VertexFromNode(const Handle(MAT_Node)& aNode,
const Standard_Real Offset,
gp_Pnt2d& PN,
BRepFill_DataMapOfNodeShape& MapNodeVertex,
TopoDS_Vertex& VN)
{
Standard_Boolean Status;
constexpr Standard_Real Tol = Precision::Confusion();
BRep_Builder B;
if (!aNode->Infinite() && Abs(aNode->Distance() - Offset) < Tol)
{
//------------------------------------------------
// the Node gives a vertex on the offset
//------------------------------------------------
if (MapNodeVertex.IsBound(aNode))
{
VN = TopoDS::Vertex(MapNodeVertex(aNode));
}
else
{
gp_Pnt P(PN.X(), PN.Y(), 0.);
B.MakeVertex(VN);
B.UpdateVertex(VN, P, Precision::Confusion());
MapNodeVertex.Bind(aNode, VN);
}
Status = Standard_True;
}
else
Status = Standard_False;
return Status;
}
//=================================================================================================
void StoreInMap(const TopoDS_Shape& V1,
const TopoDS_Shape& V2,
TopTools_IndexedDataMapOfShapeShape& MapVV)
{
TopoDS_Shape OldV = V1, NewV = V2;
Standard_Integer i;
if (MapVV.Contains(V2))
NewV = MapVV.FindFromKey(V2);
if (MapVV.Contains(V1))
MapVV.ChangeFromKey(V1) = NewV;
for (i = 1; i <= MapVV.Extent(); i++)
if (MapVV(i).IsSame(V1))
MapVV(i) = NewV;
MapVV.Add(V1, NewV);
}
//=================================================================================================
void TrimEdge(const TopoDS_Edge& E,
const TopoDS_Shape& ProE,
const TopoDS_Face& AllSpine,
const TopTools_ListOfShape& Detromp,
TopTools_SequenceOfShape& TheVer,
TColStd_SequenceOfReal& ThePar,
TopTools_SequenceOfShape& S,
TopTools_IndexedDataMapOfShapeShape& MapVV,
const Standard_Integer IndOfE)
{
Standard_Boolean Change = Standard_True;
BRep_Builder TheBuilder;
S.Clear();
//-----------------------------------------------------------
// Parse two sequences depending on the parameter on the edge.
//-----------------------------------------------------------
while (Change)
{
Change = Standard_False;
for (Standard_Integer i = 1; i < ThePar.Length(); i++)
{
if (ThePar.Value(i) > ThePar.Value(i + 1))
{
ThePar.Exchange(i, i + 1);
TheVer.Exchange(i, i + 1);
Change = Standard_True;
}
}
}
//----------------------------------------------------------
// If a vertex is not in the proofing, it is eliminated.
//----------------------------------------------------------
if (!BRep_Tool::Degenerated(E))
{
for (Standard_Integer k = 1; k <= TheVer.Length(); k++)
{
if (DoubleOrNotInside(Detromp, TopoDS::Vertex(TheVer.Value(k))))
{
TheVer.Remove(k);
ThePar.Remove(k);
k--;
}
}
}
//----------------------------------------------------------
// If a vertex_double appears twice in the proofing
// the vertex is removed.
// otherwise preserve only one of its representations.
//----------------------------------------------------------
if (!BRep_Tool::Degenerated(E))
{
constexpr Standard_Real aParTol = 2.0 * Precision::PConfusion();
for (Standard_Integer k = 1; k < TheVer.Length(); k++)
{
if (TheVer.Value(k).IsSame(TheVer.Value(k + 1))
|| Abs(ThePar.Value(k) - ThePar.Value(k + 1)) <= aParTol)
{
if (k + 1 == TheVer.Length())
{
StoreInMap(TheVer(k), TheVer(k + 1), MapVV);
TheVer.Remove(k);
ThePar.Remove(k);
}
else
{
StoreInMap(TheVer(k + 1), TheVer(k), MapVV);
TheVer.Remove(k + 1);
ThePar.Remove(k + 1);
}
/*
if ( DoubleOrNotInside (Detromp,
TopoDS::Vertex(TheVer.Value(k)))) {
TheVer.Remove(k);
ThePar.Remove(k);
k--;
}
*/
k--;
}
}
}
//-----------------------------------------------------------
// Creation of edges.
// the number of vertices should be even. The created edges
// go from a vertex with uneven index i to vertex i+1;
//-----------------------------------------------------------
if (IndOfE == 1 || IndOfE == -1) // open result and extreme edges of result
{
TopoDS_Shape aLocalShape = E.EmptyCopied();
TopoDS_Edge NewEdge = TopoDS::Edge(aLocalShape);
TopoDS_Vertex V1, V2;
TopExp::Vertices(E, V1, V2);
Standard_Real fpar, lpar;
Handle(Geom_Surface) aPlane;
TopLoc_Location aLoc;
Handle(Geom2d_Curve) PCurve;
BRep_Tool::CurveOnSurface(E, PCurve, aPlane, aLoc, fpar, lpar);
// BRep_Tool::Range(E, fpar, lpar);
Standard_Real TrPar1, TrPar2;
Standard_Boolean ToTrimAsOrigin = IsInnerEdge(ProE, AllSpine, TrPar1, TrPar2);
if (IndOfE == 1) // first edge of open wire
{
if (NewEdge.Orientation() == TopAbs_FORWARD)
{
if (ToTrimAsOrigin)
{
fpar = TrPar1;
gp_Pnt2d TrPnt2d = PCurve->Value(fpar);
gp_Pnt TrPnt(TrPnt2d.X(), TrPnt2d.Y(), 0.);
V1 = BRepLib_MakeVertex(TrPnt);
}
TheBuilder.Add(NewEdge, V1.Oriented(TopAbs_FORWARD));
TheBuilder.Add(NewEdge, TheVer.First().Oriented(TopAbs_REVERSED));
TheBuilder.Range(NewEdge, fpar, ThePar.First());
}
else
{
if (ToTrimAsOrigin)
{
lpar = TrPar2;
gp_Pnt2d TrPnt2d = PCurve->Value(lpar);
gp_Pnt TrPnt(TrPnt2d.X(), TrPnt2d.Y(), 0.);
V2 = BRepLib_MakeVertex(TrPnt);
}
TheBuilder.Add(NewEdge, TheVer.First().Oriented(TopAbs_REVERSED));
TheBuilder.Add(NewEdge, V2.Oriented(TopAbs_FORWARD));
TheBuilder.Range(NewEdge, ThePar.First(), lpar);
}
}
else // last edge of open wire
{
if (NewEdge.Orientation() == TopAbs_FORWARD)
{
if (ToTrimAsOrigin)
{
lpar = TrPar2;
gp_Pnt2d TrPnt2d = PCurve->Value(lpar);
gp_Pnt TrPnt(TrPnt2d.X(), TrPnt2d.Y(), 0.);
V2 = BRepLib_MakeVertex(TrPnt);
}
TheBuilder.Add(NewEdge, TheVer.First().Oriented(TopAbs_FORWARD));
TheBuilder.Add(NewEdge, V2.Oriented(TopAbs_REVERSED));
TheBuilder.Range(NewEdge, ThePar.First(), lpar);
}
else
{
if (ToTrimAsOrigin)
{
fpar = TrPar1;
gp_Pnt2d TrPnt2d = PCurve->Value(fpar);
gp_Pnt TrPnt(TrPnt2d.X(), TrPnt2d.Y(), 0.);
V1 = BRepLib_MakeVertex(TrPnt);
}
TheBuilder.Add(NewEdge, V1.Oriented(TopAbs_REVERSED));
TheBuilder.Add(NewEdge, TheVer.First().Oriented(TopAbs_FORWARD));
TheBuilder.Range(NewEdge, fpar, ThePar.First());
}
}
S.Append(NewEdge);
}
else
{
for (Standard_Integer k = 1; k < TheVer.Length(); k = k + 2)
{
TopoDS_Shape aLocalShape = E.EmptyCopied();
TopoDS_Edge NewEdge = TopoDS::Edge(aLocalShape);
// TopoDS_Edge NewEdge = TopoDS::Edge(E.EmptyCopied());
if (NewEdge.Orientation() == TopAbs_REVERSED)
{
TheBuilder.Add(NewEdge, TheVer.Value(k).Oriented(TopAbs_REVERSED));
TheBuilder.Add(NewEdge, TheVer.Value(k + 1).Oriented(TopAbs_FORWARD));
}
else
{
TheBuilder.Add(NewEdge, TheVer.Value(k).Oriented(TopAbs_FORWARD));
TheBuilder.Add(NewEdge, TheVer.Value(k + 1).Oriented(TopAbs_REVERSED));
}
TheBuilder.Range(NewEdge, ThePar.Value(k), ThePar.Value(k + 1));
#ifdef OCCT_DEBUG
#ifdef DRAW
if (AffichEdge)
{
char name[256];
sprintf(name, "TRIMEDGE_%d", NbTRIMEDGES);
DBRep::Set(name, NewEdge);
}
if (Affich2d)
{
TopLoc_Location L;
Standard_Real f, l;
Handle(Geom_Surface) Surf;
Handle(Geom2d_Curve) C;
BRep_Tool::CurveOnSurface(NewEdge, C, Surf, L, f, l);
char name[256];
sprintf(name, "OFFSET2d_%d", NbTRIMEDGES++);
Handle(Geom2d_TrimmedCurve) C2d = new Geom2d_TrimmedCurve(C, f, l);
Handle(DrawTrSurf_Curve2d) dr = new DrawTrSurf_Curve2d(C2d, Standard_False);
dr->SetColor(Draw_bleu);
Draw::Set(name, dr);
}
#endif
#endif
S.Append(NewEdge);
}
}
}
//=================================================================================================
static Standard_Boolean IsInnerEdge(const TopoDS_Shape& ProE,
const TopoDS_Face& AllSpine,
Standard_Real& TrPar1,
Standard_Real& TrPar2)
{
if (ProE.ShapeType() != TopAbs_EDGE)
return Standard_False;
TopoDS_Edge anEdge = TopoDS::Edge(ProE);
TopTools_IndexedDataMapOfShapeListOfShape VEmap;
TopExp::MapShapesAndAncestors(AllSpine, TopAbs_VERTEX, TopAbs_EDGE, VEmap);
for (Standard_Integer i = 1; i <= VEmap.Extent(); i++)
{
const TopTools_ListOfShape& LE = VEmap(i);
if (LE.Extent() == 1 && anEdge.IsSame(LE.First()))
return Standard_False;
}
BRep_Tool::Range(anEdge, TrPar1, TrPar2);
return Standard_True;
}
//=======================================================================
// function : DoubleOrNotInside
// purpose : return True if V appears twice in LV or is not inside.
//=======================================================================
Standard_Boolean DoubleOrNotInside(const TopTools_ListOfShape& LV, const TopoDS_Vertex& V)
{
Standard_Boolean Vu = Standard_False;
TopTools_ListIteratorOfListOfShape it(LV);
for (; it.More(); it.Next())
{
if (V.IsSame(it.Value()))
{
if (Vu)
return Standard_True;
else
Vu = Standard_True;
}
}
if (Vu)
return Standard_False;
else
return Standard_True;
}
Standard_Boolean IsSmallClosedEdge(const TopoDS_Edge& anEdge, const TopoDS_Vertex& aVertex)
{
gp_Pnt PV = BRep_Tool::Pnt(aVertex);
gp_Pnt2d PV2d, Pfirst, Plast, Pmid;
PV2d.SetCoord(PV.X(), PV.Y());
Handle(Geom2d_Curve) PCurve;
Handle(BRep_CurveRepresentation) CurveRep =
((Handle(BRep_TEdge)::DownCast(anEdge.TShape()))->Curves()).First();
PCurve = CurveRep->PCurve();
Standard_Real fpar = (Handle(BRep_GCurve)::DownCast(CurveRep))->First();
Standard_Real lpar = (Handle(BRep_GCurve)::DownCast(CurveRep))->Last();
Pfirst = PCurve->Value(fpar);
Plast = PCurve->Value(lpar);
Pmid = PCurve->Value((fpar + lpar) * 0.5);
Standard_Real theTol = BRep_Tool::Tolerance(aVertex);
theTol *= 1.5;
Standard_Real dist1 = Pfirst.Distance(PV2d);
Standard_Real dist2 = Plast.Distance(PV2d);
Standard_Real dist3 = Pmid.Distance(PV2d);
if (dist1 <= theTol && dist2 <= theTol && dist3 <= theTol)
return Standard_True;
return Standard_False;
}
static void CheckBadEdges(const TopoDS_Face& Spine,
const Standard_Real Offset,
const BRepMAT2d_BisectingLocus& Locus,
const BRepMAT2d_LinkTopoBilo& Link,
TopTools_ListOfShape& BadEdges)
{
TopoDS_Face F = TopoDS::Face(Spine.Oriented(TopAbs_FORWARD));
constexpr Standard_Real eps = Precision::Confusion();
Standard_Real LimCurv = 1. / Offset;
TopTools_MapOfShape aMap;
for (Standard_Integer ic = 1; ic <= Locus.NumberOfContours(); ic++)
{
for (Standard_Integer ie = 1; ie <= Locus.NumberOfElts(ic); ie++)
{
const TopoDS_Shape& SE = Link.GeneratingShape(Locus.BasicElt(ic, ie));
if (SE.ShapeType() == TopAbs_EDGE)
{
if (aMap.Contains(SE))
{
// std::cout << "Edge is treated second time" << std::endl;
continue;
}
TopoDS_Edge E = TopoDS::Edge(SE);
Standard_Real f, l;
Handle(Geom2d_Curve) G2d = BRep_Tool::CurveOnSurface(E, F, f, l);
Geom2dAdaptor_Curve AC(G2d, f, l);
GeomAbs_CurveType aCType = AC.GetType();
if (aCType != GeomAbs_Line && aCType != GeomAbs_Circle)
{
Standard_Boolean reverse = Standard_False;
if (E.Orientation() == TopAbs_FORWARD)
reverse = Standard_True;
gp_Pnt2d P, Pc;
gp_Dir2d N;
Geom2dLProp_CLProps2d aCLProps(G2d, 2, eps);
aCLProps.SetParameter(f);
if (!aCLProps.IsTangentDefined())
{
BadEdges.Append(SE);
aMap.Add(SE);
continue;
}
P = aCLProps.Value();
Standard_Real Crv = aCLProps.Curvature();
if (Crv >= eps)
{
aCLProps.Tangent(N);
Standard_Real x = N.Y(), y = -N.X();
N.SetCoord(x, y);
if (reverse)
N.Reverse();
aCLProps.CentreOfCurvature(Pc);
gp_Vec2d Dir(P, Pc);
if (N.Dot(Dir) > 0.)
{
if (LimCurv <= Crv + eps)
{
BadEdges.Append(SE);
aMap.Add(SE);
continue;
}
}
}
aCLProps.SetParameter(l);
if (!aCLProps.IsTangentDefined())
{
BadEdges.Append(SE);
aMap.Add(SE);
continue;
}
P = aCLProps.Value();
Crv = aCLProps.Curvature();
if (Crv >= eps)
{
aCLProps.Tangent(N);
Standard_Real x = N.Y(), y = -N.X();
N.SetCoord(x, y);
if (reverse)
N.Reverse();
aCLProps.CentreOfCurvature(Pc);
gp_Vec2d Dir(P, Pc);
if (N.Dot(Dir) > 0.)
{
if (LimCurv <= Crv + eps)
{
BadEdges.Append(SE);
aMap.Add(SE);
continue;
}
}
}
}
}
}
}
}
//=================================================================================================
static Standard_Boolean PerformCurve(TColStd_SequenceOfReal& Parameters,
TColgp_SequenceOfPnt& Points,
const Adaptor3d_Curve& C,
const Standard_Real Deflection,
const Standard_Real U1,
const Standard_Real U2,
const Standard_Real EPSILON,
const Standard_Integer Nbmin)
{
Standard_Real UU1 = Min(U1, U2);
Standard_Real UU2 = Max(U1, U2);
gp_Pnt Pdeb, Pfin;
gp_Vec Ddeb, Dfin;
C.D1(UU1, Pdeb, Ddeb);
Parameters.Append(UU1);
Points.Append(Pdeb);
C.D1(UU2, Pfin, Dfin);
const Standard_Real aDelta = UU2 - UU1;
const Standard_Real aDist = Pdeb.Distance(Pfin);
if ((aDelta / aDist) > 5.0e-14)
{
QuasiFleche(C,
Deflection * Deflection,
UU1,
Pdeb,
Ddeb,
UU2,
Pfin,
Dfin,
Nbmin,
EPSILON * EPSILON,
Parameters,
Points);
}
return Standard_True;
}
//=================================================================================================
static void QuasiFleche(const Adaptor3d_Curve& C,
const Standard_Real Deflection2,
const Standard_Real Udeb,
const gp_Pnt& Pdeb,
const gp_Vec& Vdeb,
const Standard_Real Ufin,
const gp_Pnt& Pfin,
const gp_Vec& Vfin,
const Standard_Integer Nbmin,
const Standard_Real Eps,
TColStd_SequenceOfReal& Parameters,
TColgp_SequenceOfPnt& Points)
{
Standard_Integer Ptslength = Points.Length();
Standard_Real Udelta = Ufin - Udeb;
gp_Pnt Pdelta;
gp_Vec Vdelta;
if (Nbmin > 2)
{
Udelta /= (Nbmin - 1);
C.D1(Udeb + Udelta, Pdelta, Vdelta);
}
else
{
Pdelta = Pfin;
Vdelta = Vfin;
}
Standard_Real Norme = gp_Vec(Pdeb, Pdelta).SquareMagnitude();
Standard_Real theFleche = 0;
Standard_Boolean flecheok = Standard_False;
if (Norme > Eps)
{
// Evaluation of the arrow by interpolation. See IntWalk_IWalking::TestDeflection
Standard_Real N1 = Vdeb.SquareMagnitude();
Standard_Real N2 = Vdelta.SquareMagnitude();
if (N1 > Eps && N2 > Eps)
{
Standard_Real Normediff =
(Vdeb.Normalized().XYZ() - Vdelta.Normalized().XYZ()).SquareModulus();
if (Normediff > Eps)
{
theFleche = Normediff * Norme / 64.;
flecheok = Standard_True;
}
}
}
if (!flecheok)
{
gp_Pnt Pmid((Pdeb.XYZ() + Pdelta.XYZ()) / 2.);
gp_Pnt Pverif(C.Value(Udeb + Udelta / 2.));
theFleche = Pmid.SquareDistance(Pverif);
}
if (theFleche < Deflection2)
{
Parameters.Append(Udeb + Udelta);
Points.Append(Pdelta);
}
else
{
QuasiFleche(C,
Deflection2,
Udeb,
Pdeb,
Vdeb,
Udeb + Udelta,
Pdelta,
Vdelta,
3,
Eps,
Parameters,
Points);
}
if (Nbmin > 2)
{
QuasiFleche(C,
Deflection2,
Udeb + Udelta,
Pdelta,
Vdelta,
Ufin,
Pfin,
Vfin,
Nbmin - (Points.Length() - Ptslength),
Eps,
Parameters,
Points);
}
}
Standard_Boolean CheckSmallParamOnEdge(const TopoDS_Edge& anEdge)
{
const BRep_ListOfCurveRepresentation& aList =
((Handle(BRep_TEdge)::DownCast(anEdge.TShape()))->Curves());
if (!aList.IsEmpty())
{
Handle(BRep_CurveRepresentation) CRep =
((Handle(BRep_TEdge)::DownCast(anEdge.TShape()))->Curves()).First();
Standard_Real f = (Handle(BRep_GCurve)::DownCast(CRep))->First();
Standard_Real l = (Handle(BRep_GCurve)::DownCast(CRep))->Last();
if (Abs(l - f) < Precision::PConfusion())
return Standard_False;
}
return Standard_True;
}
c5f20409cThis file is pinned to the selected release. Download the original to open it in your design tool.