OCCT

// Created on: 1996-04-09
// Created by: Yves FRICAUD
// Copyright (c) 1996-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#include <BRepBuilderAPI_Collect.hxx>
#include <BRepBuilderAPI_MakeShape.hxx>
#include <TopExp_Explorer.hxx>
#include <TopoDS.hxx>
#include <TopoDS_Shape.hxx>
#include <TopTools_DataMapIteratorOfDataMapOfShapeListOfShape.hxx>
#include <TopTools_DataMapOfShapeShape.hxx>
#include <TopTools_ListOfShape.hxx>
#include <TopTools_MapOfShape.hxx>

#ifdef OCCT_DEBUG
  #include <stdio.h>
Standard_Boolean Affich;
#endif

#ifdef DRAW
  #include <DBRep.hxx>
#endif
//=================================================================================================

static void BuildBack(const TopTools_DataMapOfShapeListOfShape& M1,
                      TopTools_DataMapOfShapeShape&             BM1)
{
  TopTools_DataMapIteratorOfDataMapOfShapeListOfShape it(M1);
  for (; it.More(); it.Next())
  {
    const TopoDS_Shape&                KS = it.Key();
    TopTools_ListIteratorOfListOfShape itl(it.Value());
    for (; itl.More(); itl.Next())
    {
      const TopoDS_Shape& VS = itl.Value();
      BM1.Bind(VS, KS);
    }
  }
}

//=================================================================================================

static void Replace(TopTools_ListOfShape&       L,
                    const TopoDS_Shape&         Old,
                    const TopTools_ListOfShape& New)
{
  //-----------------------------------
  // Suppression de Old dans la liste.
  //-----------------------------------
  TopTools_ListIteratorOfListOfShape it(L);
  while (it.More())
  {
    if (it.Value().IsSame(Old))
    {
      L.Remove(it);
      break;
    }
    if (it.More())
      it.Next();
  }
  //---------------------------
  // Ajout de New a L.
  //---------------------------
  TopTools_ListOfShape copNew;
  copNew = New;
  L.Append(copNew);
}

//=================================================================================================

static void StoreImage(TopTools_DataMapOfShapeListOfShape& MG,
                       const TopoDS_Shape&                 S,
                       const TopTools_DataMapOfShapeShape& MGBack,
                       const TopTools_ListOfShape&         LI)
{
  if (!LI.IsEmpty())
  {
    if (MGBack.IsBound(S))
    {

      Replace(MG.ChangeFind(MGBack(S)), S, LI);
    }
    else
    {
      if (!MG.IsBound(S))
      {
        TopTools_ListOfShape empty;
        MG.Bind(S, empty);
      }
      // Dans tous les cas on copie la liste pour eviter les pb de
      // const& dans BRepBuilderAPI.
      TopTools_ListIteratorOfListOfShape it;
      for (it.Initialize(LI); it.More(); it.Next())
      {
        const TopoDS_Shape& SS = it.Value();
        MG(S).Append(SS);
      }
    }
  }
}

//=================================================================================================

static void Update(TopTools_DataMapOfShapeListOfShape& Mod,
                   TopTools_DataMapOfShapeListOfShape& Gen,
                   const TopTools_DataMapOfShapeShape& ModBack,
                   const TopTools_DataMapOfShapeShape& GenBack,
                   const TopoDS_Shape&                 SI,
                   BRepBuilderAPI_MakeShape&           MKS,
                   const TopAbs_ShapeEnum              ShapeType)
{

  TopTools_MapOfShape DejaVu;
  TopExp_Explorer     exp;

  for (exp.Init(SI, ShapeType); exp.More(); exp.Next())
  {
    const TopoDS_Shape& S = exp.Current();
    if (!DejaVu.Add(S))
      continue;

    //---------------------------------------
    // Recuperation de l image de S par MKS.
    //---------------------------------------
    const TopTools_ListOfShape& LIM = MKS.Modified(S);
    if (!LIM.IsEmpty())
    {
      if (GenBack.IsBound(S))
      {
        // Modif de generation => generation du shape initial
        StoreImage(Gen, S, GenBack, LIM);
      }
      else
      {
        StoreImage(Mod, S, ModBack, LIM);
      }
    }
    const TopTools_ListOfShape& LIG = MKS.Generated(S);
    if (!LIG.IsEmpty())
    {
      if (ModBack.IsBound(S))
      {
        // Generation de modif  => generation du shape initial
        const TopoDS_Shape& IS = ModBack(S);
        StoreImage(Gen, IS, GenBack, LIG);
      }
      else
      {
        StoreImage(Gen, S, GenBack, LIG);
      }
    }
  }
}
#ifdef OCCT_DEBUG
//=================================================================================================

static void DEBControl(const TopTools_DataMapOfShapeListOfShape& MG)
{
  char             name[100];
  Standard_Integer IK = 0;

  TopTools_DataMapIteratorOfDataMapOfShapeListOfShape it(MG);
  for (; it.More(); it.Next())
  {
    const TopoDS_Shape& OS = it.Key();
    sprintf(name, "SK_%d", ++IK);
  #ifdef DRAW
    DBRep::Set(name, OS);
  #endif
    TopTools_ListIteratorOfListOfShape itl(MG(OS));
    Standard_Integer                   IV = 1;
    for (; itl.More(); itl.Next())
    {
      sprintf(name, "SV_%d_%d", IK, IV++);
  #ifdef DRAW
      DBRep::Set(name, NS);
  #endif
    }
  }
}
#endif
//=================================================================================================

BRepBuilderAPI_Collect::BRepBuilderAPI_Collect() {}

//=================================================================================================

void BRepBuilderAPI_Collect::Add(const TopoDS_Shape& SI, BRepBuilderAPI_MakeShape& MKS)

{
  TopTools_DataMapOfShapeShape GenBack;
  TopTools_DataMapOfShapeShape ModBack;
  BuildBack(myGen, GenBack); // Vraiment pas optimum a Revoir
  BuildBack(myMod, ModBack);

  Update(myMod, myGen, ModBack, GenBack, SI, MKS, TopAbs_COMPOUND);
  Update(myMod, myGen, ModBack, GenBack, SI, MKS, TopAbs_COMPSOLID);
  Update(myMod, myGen, ModBack, GenBack, SI, MKS, TopAbs_SOLID);
  Update(myMod, myGen, ModBack, GenBack, SI, MKS, TopAbs_SHELL);
  Update(myMod, myGen, ModBack, GenBack, SI, MKS, TopAbs_FACE);
  Update(myMod, myGen, ModBack, GenBack, SI, MKS, TopAbs_WIRE);
  Update(myMod, myGen, ModBack, GenBack, SI, MKS, TopAbs_EDGE);
  Update(myMod, myGen, ModBack, GenBack, SI, MKS, TopAbs_VERTEX);

#ifdef OCCT_DEBUG
  if (Affich)
  {
    DEBControl(myGen);
    DEBControl(myMod);
  }
#endif
}

//=================================================================================================

void BRepBuilderAPI_Collect::AddGenerated(const TopoDS_Shape& S, const TopoDS_Shape& NS)
{
  TopTools_DataMapOfShapeShape GenBack;
  TopTools_DataMapOfShapeShape ModBack;
  BuildBack(myGen, GenBack);
  BuildBack(myMod, ModBack);

  TopTools_ListOfShape LIG;
  LIG.Append(NS);
  if (ModBack.IsBound(S))
  {
    // Generation de modif  => generation du shape initial
    TopoDS_Shape IS = ModBack(S);
    StoreImage(myGen, IS, GenBack, LIG);
  }
  else
  {
    StoreImage(myGen, S, GenBack, LIG);
  }
}

//=================================================================================================

void BRepBuilderAPI_Collect::AddModif(const TopoDS_Shape& S, const TopoDS_Shape& NS)

{
  TopTools_DataMapOfShapeShape GenBack;
  TopTools_DataMapOfShapeShape ModBack;
  BuildBack(myGen, GenBack);
  BuildBack(myMod, ModBack);

  TopTools_ListOfShape LIG;
  LIG.Append(NS);
  if (GenBack.IsBound(S))
  {
    // Modif de generation => generation du shape initial
    StoreImage(myGen, S, GenBack, LIG);
  }
  else
  {
    StoreImage(myMod, S, ModBack, LIG);
  }
}

//=================================================================================================

static void FilterByShape(TopTools_DataMapOfShapeListOfShape& MG, const TopoDS_Shape& SF)
{
  TopTools_MapOfShape MSF;
  TopExp_Explorer     exp;
  Standard_Boolean    YaEdge   = Standard_False;
  Standard_Boolean    YaVertex = Standard_False;
  for (exp.Init(SF, TopAbs_FACE); exp.More(); exp.Next())
    MSF.Add(exp.Current());

  //-------------------------------------------------------------
  // Suppression de toutes les images qui ne sont pas dans MSF.
  //-------------------------------------------------------------
  TopTools_DataMapIteratorOfDataMapOfShapeListOfShape it(MG);
  for (; it.More(); it.Next())
  {
    const TopoDS_Shape&                OS  = it.Key();
    TopTools_ListOfShape&              LNS = MG.ChangeFind(OS);
    TopTools_ListIteratorOfListOfShape itl(LNS);
    while (itl.More())
    {
      const TopoDS_Shape& NS = itl.Value();
      //-------------------------------------------------------------------
      // Images contiennet des edges => ajout des edges resultat dans MSF.
      //-------------------------------------------------------------------
      if (!YaEdge && NS.ShapeType() == TopAbs_EDGE)
      {
        for (exp.Init(SF, TopAbs_EDGE); exp.More(); exp.Next())
        {
          MSF.Add(exp.Current());
        }
        YaEdge = Standard_True;
      }
      //-------------------------------------------------------------------
      // Images contiennet des vertex => ajout des vertex resultat dans MSF.
      //-------------------------------------------------------------------
      if (!YaVertex && NS.ShapeType() == TopAbs_VERTEX)
      {
        for (exp.Init(SF, TopAbs_VERTEX); exp.More(); exp.Next())
        {
          MSF.Add(exp.Current());
        }
        YaVertex = Standard_True;
      }
      //---------------------------------------
      // Si pas dans MSF suprresion de l image.
      //---------------------------------------
      if (!MSF.Contains(NS))
      {
        LNS.Remove(itl);
      }
      else if (itl.More())
        itl.Next();
    }
  }
#ifdef OCCT_DEBUG
  if (Affich)
  {
    DEBControl(MG);
  }
#endif
}

//=================================================================================================

const TopTools_DataMapOfShapeListOfShape& BRepBuilderAPI_Collect::Modification() const
{
  return myMod;
}

//=================================================================================================

const TopTools_DataMapOfShapeListOfShape& BRepBuilderAPI_Collect::Generated() const
{
  return myGen;
}

//=================================================================================================

void BRepBuilderAPI_Collect::Filter(const TopoDS_Shape& SF)
{
  FilterByShape(myGen, SF);
  FilterByShape(myMod, SF);
}