OCCT

// Created on: 1998-06-18
// Created by: Philippe NOUAILLE
// Copyright (c) 1998-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#include <Adaptor3d_Surface.hxx>
#include <ChFiDS_SurfData.hxx>
#include <ChFiKPart_ComputeData.hxx>
#include <ChFiKPart_ComputeData_Fcts.hxx>
#include <ElCLib.hxx>
#include <ElSLib.hxx>
#include <Geom2d_Circle.hxx>
#include <Geom2d_Line.hxx>
#include <Geom_Circle.hxx>
#include <Geom_ConicalSurface.hxx>
#include <Geom_CylindricalSurface.hxx>
#include <gp.hxx>
#include <gp_Ax2.hxx>
#include <gp_Ax3.hxx>
#include <gp_Circ.hxx>
#include <gp_Dir.hxx>
#include <gp_Dir2d.hxx>
#include <gp_Lin2d.hxx>
#include <gp_Pnt.hxx>
#include <gp_Pnt2d.hxx>
#include <gp_Vec.hxx>
#include <Precision.hxx>
#include <TopOpeBRepDS_DataStructure.hxx>

//=======================================================================
// function : MakeChAsym
// purpose  : Compute the chamfer in the particular case Plane/Cone or
//           Cylinder/Plane
//           Compute the SurfData <Data> of the chamfer build on the <Spine>
//           between the plane <Pln> and the cone <Con>, with the
//           distances <Dis1> on <Pln> and <Dis2> on <Con>.
//           <Or1> and <Or2> are the orientations of <Pln> and <Con>
//           and <Ofpl> this of the face carried by <Pln>.
//           <First> is the start point on the <Spine>
//           <Plandab> is equal to True if the plane is the surface S1
//           <fu> and <lu> are the first and last u parameters of the
//           cone
// out      : True if the chanfer has been computed
//           False else
//=======================================================================
Standard_Boolean ChFiKPart_MakeChAsym(TopOpeBRepDS_DataStructure&    DStr,
                                      const Handle(ChFiDS_SurfData)& Data,
                                      const gp_Pln&                  Pln,
                                      const gp_Cone&                 Con,
                                      const Standard_Real            fu,
                                      const Standard_Real            lu,
                                      const TopAbs_Orientation       Or1,
                                      const TopAbs_Orientation       Or2,
                                      const Standard_Real            Dis,
                                      const Standard_Real            Angle,
                                      const gp_Circ&                 Spine,
                                      const Standard_Real            First,
                                      const TopAbs_Orientation       Ofpl,
                                      const Standard_Boolean         plandab,
                                      const Standard_Boolean         DisOnP)
{
  // Compute the chamfer surface(cone)
  gp_Ax3 PosPl = Pln.Position();
  gp_Dir Dpl   = PosPl.XDirection().Crossed(PosPl.YDirection());
  gp_Dir norf  = Dpl;
  if (Ofpl == TopAbs_REVERSED)
    norf.Reverse();
  if (Or1 == TopAbs_REVERSED)
    Dpl.Reverse();

  // compute the origin of the conical chamfer PtPl
  gp_Pnt        Or = Con.Location();
  Standard_Real u, v;
  ElSLib::PlaneParameters(PosPl, Or, u, v);
  gp_Pnt2d pt2dPln(u, v);
  ElSLib::PlaneD0(u, v, PosPl, Or);
  gp_Pnt PtPl = Or;

  gp_Pnt PtSp;
  gp_Vec DSp;
  ElCLib::D1(First, Spine, PtSp, DSp);
  gp_Dir Dx(gp_Vec(PtPl, PtSp));

  // compute the normal to the cone in PtSp
  gp_Vec deru, derv;
  gp_Pnt PtCon;
  ElSLib::Parameters(Con, PtSp, u, v);
  ElSLib::D1(u, v, Con, PtCon, deru, derv);
  gp_Dir Dcon(deru.Crossed(derv));
  if (Or2 == TopAbs_REVERSED)
    Dcon.Reverse();

  Standard_Boolean dedans = (Dx.Dot(Dcon) <= 0.);
  Standard_Boolean ouvert = (Dpl.Dot(Dcon) >= 0.);

  // variables used to compute the semiangle of the chamfer
  Standard_Real    angCon = Con.SemiAngle();
  Standard_Real    move;
  Standard_Real    ChamfRad, SemiAngl;
  Standard_Boolean pointu = Standard_False;
  Standard_Real    dis;
  Standard_Boolean iscylinder = Standard_False;
  Standard_Boolean isConPar   = Standard_False;

  if ((plandab && DisOnP) || (!plandab && !DisOnP))
  {
    Standard_Real tgang = Tan(Angle), Dis11;
    Standard_Real tgCon = Abs(Tan(angCon));
    if (ouvert)
    {
      move  = Dis * tgang / (1. - tgCon * tgang);
      Dis11 = move * tgCon;
      dis   = Dis + Dis11;
    }
    else
    {
      move  = Dis * tgang / (1. + tgCon * tgang);
      Dis11 = move * tgCon;
      dis   = Dis - Dis11;
    }

    // compute the parameters of the conical chamfer
    if (dedans)
    {
      ChamfRad = Spine.Radius() - Dis;
      if (Abs(ChamfRad) < Precision::Confusion())
        pointu = Standard_True;
      if (ChamfRad < 0)
      {
#ifdef OCCT_DEBUG
        std::cout << "the chamfer can't pass" << std::endl;
#endif
        return Standard_False;
      }
      SemiAngl = M_PI / 2. - Angle;
    }
    else
    {
      ChamfRad = Spine.Radius() + Dis;
      SemiAngl = Angle - M_PI / 2.;
    }

    if (ouvert)
    {
      if (Abs(angCon) - Abs(SemiAngl) > -Precision::Confusion())
      {
#ifdef OCCT_DEBUG
        std::cout << "wrong choice of angle for the chamfer" << std::endl;
#endif
        return Standard_False;
      }
    }
  }
  else
  {
    Standard_Real Dis1;
    move = Dis * Cos(angCon);
    if (ouvert)
    {
      SemiAngl = Abs(angCon) + Angle;

      if ((M_PI / 2. - SemiAngl) < Precision::Confusion())
      {
#ifdef OCCT_DEBUG
        std::cout << "wrong choice of angle for the chamfer" << std::endl;
#endif
        return Standard_False;
      }
      Dis1 = move * Tan(SemiAngl) - Dis * Abs(Sin(angCon));

      if (!dedans)
        SemiAngl = -SemiAngl;
    }
    else
    {
      SemiAngl = Abs(angCon) - Angle;

      if (Abs(SemiAngl) < Precision::Confusion())
      {
        iscylinder = Standard_True;
        Dis1       = Dis * Abs(Sin(angCon));
      }
      else
      {
        Dis1 = Dis * Abs(Sin(angCon)) - move * Tan(SemiAngl);
      }

      if (SemiAngl > Precision::Confusion())
        isConPar = Standard_True;

      if (dedans)
        SemiAngl = -SemiAngl;
    }

    // compute the parameters of the conical chamfer
    if (dedans)
    {
      ChamfRad = Spine.Radius() - Dis1;

      if (Abs(ChamfRad) < Precision::Confusion())
        pointu = Standard_True;
      if (ChamfRad < 0)
      {
#ifdef OCCT_DEBUG
        std::cout << "the chamfer can't pass" << std::endl;
#endif
        return Standard_False;
      }
    }
    else
    {
      ChamfRad = Spine.Radius() + Dis1;
      // Dpl.Reverse();
    }

    if (ouvert)
      dis = Dis1 + Dis * Abs(Sin(angCon));
    else
      dis = Dis1 - Dis * Abs(Sin(angCon));
  }

  Or.SetCoord(Or.X() + move * Dpl.X(), Or.Y() + move * Dpl.Y(), Or.Z() + move * Dpl.Z());
  gp_Pnt Pt(Or.X() + dis * PosPl.XDirection().X(),
            Or.Y() + dis * PosPl.XDirection().Y(),
            Or.Z() + dis * PosPl.XDirection().Z());

  gp_Ax3 ChamfAx3(PtPl, Dpl, Dx);

  if (iscylinder)
  {
    Handle(Geom_CylindricalSurface) gcyl = new Geom_CylindricalSurface(ChamfAx3, ChamfRad);

    // changes due to the fact the parameters of the chamfer must go increasing
    // from surface S1 to surface S2
    if (!plandab)
    {
      gcyl->VReverse(); // be careful : the SemiAngle was changed
      ChamfAx3 = gcyl->Position();
    }

    // changes due to the fact we have reversed the V direction of
    // parametrization
    if (ChamfAx3.YDirection().Dot(DSp) <= 0.)
    {
      ChamfAx3.YReverse();
      gcyl->SetPosition(ChamfAx3);
    }

    Data->ChangeSurf(ChFiKPart_IndexSurfaceInDS(gcyl, DStr));

    Standard_Boolean torevcha = !ChamfAx3.Direct();
    gp_Dir           cylaxe   = (ChamfAx3.Axis()).Direction();
    torevcha                  = ((torevcha && !plandab) || (!torevcha && plandab));

    if (torevcha)
      cylaxe.Reverse();
    Standard_Boolean toreverse = (norf.Dot(cylaxe) < 0.);

    if ((toreverse && dedans) || (!toreverse && !dedans))
      Data->ChangeOrientation() = TopAbs_REVERSED;
    else
      Data->ChangeOrientation() = TopAbs_FORWARD;

    // we load the faceInterference with the pcurves and
    //  the 3d curves

    // Case of the plane face
    // NB: in the case 'pointu', no pcurve on the plane surface
    // and no intersection plane-chamfer are needed

    // intersection plane-chamfer
    Handle(Geom_Circle)   GCirPln;
    Handle(Geom2d_Circle) GCir2dPln;
    gp_Ax2                CirAx2 = ChamfAx3.Ax2();
    CirAx2.SetLocation(PtPl);

    Pt.SetCoord(PtPl.X() + ChamfRad * Dx.X(),
                PtPl.Y() + ChamfRad * Dx.Y(),
                PtPl.Z() + ChamfRad * Dx.Z());
    gp_Circ CirPln(CirAx2, ChamfRad);
    GCirPln = new Geom_Circle(CirPln);

    // pcurve on the plane
    ElSLib::PlaneParameters(PosPl, Pt, u, v);
    gp_Pnt2d  p2dPln(u, v);
    gp_Dir2d  d2d(DSp.Dot(PosPl.XDirection()), DSp.Dot(PosPl.YDirection()));
    gp_Ax22d  ax2dPln(pt2dPln, gp_Dir2d(gp_Vec2d(pt2dPln, p2dPln)), d2d);
    gp_Circ2d cir2dPln(ax2dPln, ChamfRad);
    GCir2dPln = new Geom2d_Circle(cir2dPln);

    // pcurve on chamfer
    gp_Pnt2d p2dch;
    p2dch.SetCoord(0., 0.);
    // ElSLib::CylinderD1(0.,0.,ChamfAx3,ChamfRad,Pt,deru,derv);
    gp_Lin2d            lin2dch(p2dch, gp::DX2d());
    Handle(Geom2d_Line) GLin2dCh1 = new Geom2d_Line(lin2dch);

    // orientation
    TopAbs_Orientation trans;
    gp_Dir             norpl = PosPl.XDirection().Crossed(PosPl.YDirection());
    toreverse                = (norpl.Dot(cylaxe) < 0.);

    toreverse = (toreverse && plandab) || (!toreverse && !plandab);

    if ((toreverse && dedans) || (!toreverse && !dedans))
    {
      trans = TopAbs_FORWARD;
    }
    else
    {
      trans = TopAbs_REVERSED;
    }

    if (plandab)
    {
      Data->ChangeInterferenceOnS1().SetInterference(ChFiKPart_IndexCurveInDS(GCirPln, DStr),
                                                     trans,
                                                     GCir2dPln,
                                                     GLin2dCh1);
    }
    else
    {
      Data->ChangeInterferenceOnS2().SetInterference(ChFiKPart_IndexCurveInDS(GCirPln, DStr),
                                                     trans,
                                                     GCir2dPln,
                                                     GLin2dCh1);
    }

    // Case of the conical face

    // intersection cone-chamfer
    Standard_Real Rad;
    if (dedans)
      Rad = ChamfRad + dis;
    else
      Rad = ChamfRad - dis;

    CirAx2.SetLocation(Or);
    gp_Circ             CirCon(CirAx2, Rad);
    Handle(Geom_Circle) GCirCon = new Geom_Circle(CirCon);

    // pcurve on chamfer
    if (plandab)
      v = sqrt(dis * dis + move * move);
    else
      v = -sqrt(dis * dis + move * move);
    p2dch.SetCoord(0., v);
    ElSLib::CylinderD1(0., v, ChamfAx3, ChamfRad, Pt, deru, derv);
    lin2dch.SetLocation(p2dch);
    Handle(Geom2d_Line) GLin2dCh2 = new Geom2d_Line(lin2dch);

    // pcurve on cone
    Pt.SetCoord(Or.X() + Rad * Dx.X(), Or.Y() + Rad * Dx.Y(), Or.Z() + Rad * Dx.Z());
    ElSLib::Parameters(Con, Pt, u, v);
    Standard_Real tol = Precision::PConfusion();
    if (u >= 2 * M_PI - tol && u <= 2 * M_PI)
      u = 0.;
    if (u >= fu - tol && u < fu)
      u = fu;
    if (u <= lu + tol && u > lu)
      u = lu;
    if (u < fu || u > lu)
      u = ElCLib::InPeriod(u, fu, fu + 2 * M_PI);
    ElSLib::D1(u, v, Con, Pt, deru, derv);
    gp_Pnt2d p2dCon(u, v);
    gp_Dir2d d2dCon;
    if (deru.Dot(DSp) <= 0.)
      d2dCon = -gp::DX2d();
    else
      d2dCon = gp::DX2d();
    gp_Lin2d            lin2dCon(p2dCon, d2dCon);
    Handle(Geom2d_Line) GLin2dCon = new Geom2d_Line(lin2dCon);

    // orientation
    gp_Dir norcon = deru.Crossed(derv);

    gp_Dir DirCon = (Con.Axis()).Direction();
    if (angCon > Precision::Confusion())
      DirCon.Reverse();
    Standard_Boolean torevcon = (norcon.Dot(DirCon) < 0.);

    if ((torevcon && dedans) || (!torevcon && !dedans))
    {
      trans = TopAbs_REVERSED;
    }
    else
    {
      trans = TopAbs_FORWARD;
    }

    if (plandab)
    {
      Data->ChangeInterferenceOnS2().SetInterference(ChFiKPart_IndexCurveInDS(GCirCon, DStr),
                                                     trans,
                                                     GLin2dCon,
                                                     GLin2dCh2);
    }
    else
    {
      Data->ChangeInterferenceOnS1().SetInterference(ChFiKPart_IndexCurveInDS(GCirCon, DStr),
                                                     trans,
                                                     GLin2dCon,
                                                     GLin2dCh2);
    }
  }
  else
  {
    Handle(Geom_ConicalSurface) gcon = new Geom_ConicalSurface(ChamfAx3, SemiAngl, ChamfRad);

    // changes due to the fact the parameters of the chamfer must go increasing
    // from surface S1 to surface S2
    if (!plandab)
    {
      gcon->VReverse(); // be careful : the SemiAngle was changed
      ChamfAx3 = gcon->Position();
      SemiAngl = gcon->SemiAngle();
    }

    // changes due to the fact we have reversed the V direction of
    // parametrization
    if (ChamfAx3.YDirection().Dot(DSp) <= 0.)
    {
      ChamfAx3.YReverse();
      gcon->SetPosition(ChamfAx3);
    }

    Data->ChangeSurf(ChFiKPart_IndexSurfaceInDS(gcon, DStr));

    // compute the chamfer's orientation according to the orientation
    //  of the faces

    // search the normal to the conical chamfer
    gp_Pnt P;
    u = 0.;
    if (plandab)
      v = sqrt(dis * dis + move * move);
    else
      v = -sqrt(dis * dis + move * move);

    ElSLib::ConeD1(u, v, ChamfAx3, ChamfRad, SemiAngl, P, deru, derv);
    gp_Dir norchamf(deru.Crossed(derv));

    Standard_Boolean toreverse = (norf.Dot(norchamf) < 0.);

    if (isConPar)
      toreverse = !toreverse;

    if (toreverse)
      Data->ChangeOrientation() = TopAbs_REVERSED;
    else
      Data->ChangeOrientation() = TopAbs_FORWARD;

    // we load the faceInterference with the pcurves and
    //  the 3d curves

    // Case of the plane face
    // NB: in the case 'pointu', no pcurve on the plane surface
    // and no intersection plane-chamfer are needed

    // intersection plane-chamfer
    Handle(Geom_Circle)   GCirPln;
    Handle(Geom2d_Circle) GCir2dPln;
    gp_Ax2                CirAx2 = ChamfAx3.Ax2();
    CirAx2.SetLocation(PtPl);

    if (!pointu)
    {
      Pt.SetCoord(PtPl.X() + ChamfRad * Dx.X(),
                  PtPl.Y() + ChamfRad * Dx.Y(),
                  PtPl.Z() + ChamfRad * Dx.Z());
      gp_Circ CirPln(CirAx2, ChamfRad);
      GCirPln = new Geom_Circle(CirPln);

      // pcurve on the plane
      ElSLib::PlaneParameters(PosPl, Pt, u, v);
      gp_Pnt2d  p2dPln(u, v);
      gp_Dir2d  d2d(DSp.Dot(PosPl.XDirection()), DSp.Dot(PosPl.YDirection()));
      gp_Ax22d  ax2dPln(pt2dPln, gp_Dir2d(gp_Vec2d(pt2dPln, p2dPln)), d2d);
      gp_Circ2d cir2dPln(ax2dPln, ChamfRad);
      GCir2dPln = new Geom2d_Circle(cir2dPln);
    }

    // pcurve on chamfer
    gp_Pnt2d p2dch;
    p2dch.SetCoord(0., 0.);
    ElSLib::ConeD1(0., 0., ChamfAx3, ChamfRad, SemiAngl, Pt, deru, derv);
    gp_Lin2d            lin2dch(p2dch, gp::DX2d());
    Handle(Geom2d_Line) GLin2dCh1 = new Geom2d_Line(lin2dch);

    // orientation
    TopAbs_Orientation trans;
    gp_Dir             norpl = PosPl.XDirection().Crossed(PosPl.YDirection());
    if (!pointu)
      norchamf.SetXYZ(deru.Crossed(derv).XYZ());
    toreverse = (norchamf.Dot(norpl) <= 0.);

    if (isConPar)
      toreverse = !toreverse;

    if ((toreverse && plandab) || (!toreverse && !plandab))
    {
      trans = TopAbs_FORWARD;
    }
    else
    {
      trans = TopAbs_REVERSED;
    }

    if (plandab)
    {
      Data->ChangeInterferenceOnS1().SetInterference(ChFiKPart_IndexCurveInDS(GCirPln, DStr),
                                                     trans,
                                                     GCir2dPln,
                                                     GLin2dCh1);
    }
    else
    {
      Data->ChangeInterferenceOnS2().SetInterference(ChFiKPart_IndexCurveInDS(GCirPln, DStr),
                                                     trans,
                                                     GCir2dPln,
                                                     GLin2dCh1);
    }

    // Case of the conical face

    // intersection cone-chamfer
    Standard_Real Rad;
    if (dedans)
      Rad = ChamfRad + dis;
    else
      Rad = ChamfRad - dis;

    CirAx2.SetLocation(Or);
    gp_Circ             CirCon(CirAx2, Rad);
    Handle(Geom_Circle) GCirCon = new Geom_Circle(CirCon);

    // pcurve on chamfer
    if (plandab)
      v = sqrt(dis * dis + move * move);
    else
      v = -sqrt(dis * dis + move * move);
    p2dch.SetCoord(0., v);
    ElSLib::ConeD1(0., v, ChamfAx3, ChamfRad, SemiAngl, Pt, deru, derv);
    lin2dch.SetLocation(p2dch);
    Handle(Geom2d_Line) GLin2dCh2 = new Geom2d_Line(lin2dch);

    // pcurve on cone
    norchamf.SetXYZ(deru.Crossed(derv).XYZ());

    Pt.SetCoord(Or.X() + Rad * Dx.X(), Or.Y() + Rad * Dx.Y(), Or.Z() + Rad * Dx.Z());
    ElSLib::Parameters(Con, Pt, u, v);
    Standard_Real tol = Precision::PConfusion();
    if (u >= 2 * M_PI - tol && u <= 2 * M_PI)
      u = 0.;
    if (u >= fu - tol && u < fu)
      u = fu;
    if (u <= lu + tol && u > lu)
      u = lu;
    if (u < fu || u > lu)
      u = ElCLib::InPeriod(u, fu, fu + 2 * M_PI);
    ElSLib::D1(u, v, Con, Pt, deru, derv);
    gp_Pnt2d p2dCon(u, v);
    gp_Dir2d d2dCon;
    if (deru.Dot(DSp) <= 0.)
      d2dCon = -gp::DX2d();
    else
      d2dCon = gp::DX2d();
    gp_Lin2d            lin2dCon(p2dCon, d2dCon);
    Handle(Geom2d_Line) GLin2dCon = new Geom2d_Line(lin2dCon);

    // orientation
    gp_Dir norcon = deru.Crossed(derv);

    gp_Dir DirCon   = (Con.Axis()).Direction();
    gp_Dir DirChamf = (gcon->Axis()).Direction();
    if (angCon > Precision::Confusion())
      DirCon.Reverse();
    if (SemiAngl > Precision::Confusion())
      DirChamf.Reverse();

    Standard_Boolean torevcon = (norcon.Dot(DirCon) > 0.);
    Standard_Boolean torevcha = (norchamf.Dot(DirChamf) > 0.);

    toreverse = ((torevcon && !torevcha) || (!torevcon && torevcha));

    if ((toreverse && plandab) || (!toreverse && !plandab))
    {
      trans = TopAbs_REVERSED;
    }
    else
    {
      trans = TopAbs_FORWARD;
    }

    if (plandab)
    {
      Data->ChangeInterferenceOnS2().SetInterference(ChFiKPart_IndexCurveInDS(GCirCon, DStr),
                                                     trans,
                                                     GLin2dCon,
                                                     GLin2dCh2);
    }
    else
    {
      Data->ChangeInterferenceOnS1().SetInterference(ChFiKPart_IndexCurveInDS(GCirCon, DStr),
                                                     trans,
                                                     GLin2dCon,
                                                     GLin2dCh2);
    }
  }
  return Standard_True;
}