OCCT

// Created on: 1995-06-16
// Created by: Jacques GOUSSARD
// Copyright (c) 1995-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#include <Draw_Interpretor.hxx>
#include <Draw_Appli.hxx>
#include <DrawTrSurf.hxx>
#include <Draw_ProgressIndicator.hxx>

#include <TopExp_Explorer.hxx>

#include <Geom_RectangularTrimmedSurface.hxx>
#include <Geom_Plane.hxx>
#include <Geom_CylindricalSurface.hxx>

// #include <BRepFeat_LocalOperation.hxx>
#include <BRepFeat_MakeCylindricalHole.hxx>
#include <BRepFeat_SplitShape.hxx>
#include <BRepFeat_Gluer.hxx>

#include <BRepFeat.hxx>
#include <BRepFeat_MakePrism.hxx>
#include <BRepFeat_MakeRevol.hxx>
#include <BRepFeat_MakePipe.hxx>
#include <BRepFeat_MakeDPrism.hxx>
#include <BRepFeat_MakeLinearForm.hxx>
#include <BRepFeat_MakeRevolutionForm.hxx>

#include <LocOpe_FindEdges.hxx>
#include <LocOpe_FindEdgesInFace.hxx>

#include <BRepOffset_MakeOffset.hxx>
#include <BRepOffsetAPI_MakeOffsetShape.hxx>
#include <BRepOffset_MakeSimpleOffset.hxx>
#include <BRep_Builder.hxx>
#include <DBRep.hxx>
#include <DBRep_DrawableShape.hxx>
#include <BRepTest.hxx>
#include <BRepTest_Objects.hxx>

#include <BRepFilletAPI_MakeFillet.hxx>
#include <ChFi3d_FilletShape.hxx>
#include <Message.hxx>

#include <Precision.hxx>

#ifdef _WIN32
Standard_IMPORT Draw_Viewer dout;
#endif

static BRepFeat_MakeCylindricalHole& getHole()
{
  static BRepFeat_MakeCylindricalHole theHole;
  return theHole;
}

static Standard_Boolean WithControl = Standard_True;

Standard_Boolean DownCastingEnforcing = Standard_False;

static BRepFeat_MakePrism& getPrism()
{
  static BRepFeat_MakePrism thePrism;
  return thePrism;
}

static BRepFeat_MakeDPrism& getDPrism()
{
  static BRepFeat_MakeDPrism theDPrism;
  return theDPrism;
}

static BRepFeat_MakeRevol& getRevol()
{
  static BRepFeat_MakeRevol theRevol;
  return theRevol;
}

static BRepFeat_MakePipe& getPipe()
{
  static BRepFeat_MakePipe thePipe;
  return thePipe;
}

static BRepFeat_MakeLinearForm& getLienarForm()
{
  static BRepFeat_MakeLinearForm theLF;
  return theLF;
}

static BRepFeat_MakeRevolutionForm& getRevolutionForm()
{
  static BRepFeat_MakeRevolutionForm theRF;
  return theRF;
}

// Input shapes for Prism, DPrism, Revol, Pipe
static TopoDS_Shape theSbase, thePbase;
static TopoDS_Face  theSkface;

static Standard_Boolean dprdef = Standard_False;
static Standard_Boolean prdef  = Standard_False;
static Standard_Boolean rvdef  = Standard_False;
static Standard_Boolean pidef  = Standard_False;
static Standard_Boolean lfdef  = Standard_False;
static Standard_Boolean rfdef  = Standard_False;

static Standard_Real             tesp       = 1.0e-4;
static Standard_Real             t3d        = 1.e-4;
static Standard_Real             t2d        = 1.e-5;
static Standard_Real             ta         = 1.e-2;
static Standard_Real             fl         = 1.e-3;
static Standard_Real             tapp_angle = 1.e-2;
static GeomAbs_Shape             blend_cont = GeomAbs_C1;
static BRepFilletAPI_MakeFillet* Rakk       = 0;

static void Print(Draw_Interpretor& di, const BRepFeat_Status St)
{
  di << "  Error Status : ";
  switch (St)
  {
    case BRepFeat_NoError:
      di << "No error";
      break;

    case BRepFeat_InvalidPlacement:
      di << "Invalid placement";
      break;

    case BRepFeat_HoleTooLong:
      di << "Hole too long";
      break;
  }
}

static Standard_Integer Loc(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{
  if (narg < 6)
    return 1;
  TopoDS_Shape S = DBRep::Get(a[2]);
  TopoDS_Shape T = DBRep::Get(a[3]);

  Standard_Boolean Fuse;
  if (!strcasecmp("F", a[4]))
  {
    Fuse = Standard_True;
  }
  else if (!strcasecmp("C", a[4]))
  {
    Fuse = Standard_False;
  }
  else
  {
    return 1;
  }

  TopTools_ListOfShape LF;
  for (Standard_Integer i = 0; i <= narg - 6; i++)
  {
    TopoDS_Shape aLocalShape(DBRep::Get(a[i + 5], TopAbs_FACE));
    LF.Append(aLocalShape);
    //    LF.Append(TopoDS::Face(DBRep::Get(a[i+5],TopAbs_FACE)));
  }

  // BRepFeat_LocalOperation BLoc(S);
  // BLoc.Perform(T,LF,Fuse);
  // BLoc.BuildPartsOfTool();
  TopTools_ListOfShape parts;
  BRepFeat_Builder     BLoc;
  BLoc.Init(S, T);
  BLoc.SetOperation(Fuse);
  // BRepFeat_LocalOperation BLoc;
  // BLoc.Init(S,T,Fuse);
  BLoc.Perform();
  BLoc.PartsOfTool(parts);

#if 0
  char newname[1024];
  strcpy(newname, a[1]);
  char* p = newname;
  while (*p != '\0') p++;
  *p = '_';
  p++;
  TopTools_ListIteratorOfListOfShape its(parts);
  dout.Clear();
  i = 0;
  for (; its.More(); its.Next()) {
    i++;
    Sprintf(p, "%d", i);
    DBRep::Set(newname, its.Value());
  }
  if (i >= 2) {
    dout.Flush();
    Standard_Integer qq, ww, ee, button;
    TopoDS_Shell S;
    do {
      TopoDS_Shape aLocalShape(DBRep::Get(".", TopAbs_SHELL));
      S = TopoDS::Shell(aLocalShape);
      //      S = TopoDS::Shell(DBRep::Get(".",TopAbs_SHELL));
      Draw::LastPick(qq, ww, ee, button);
      if (!S.IsNull()) {

        switch (button) {
        case 1:
          //BLoc.RemovePart(S);
          break;
        case 2:
          BLoc.KeepPart(S);
          break;
        default:
        {}
        }
      }
      else {
        button = 3;
      }

    } while (button != 3);
  }
#endif
  BLoc.PerformResult();
  if (!BLoc.HasErrors())
  {
    //    dout.Clear();
    DBRep::Set(a[1], BLoc.Shape());
    dout.Flush();
    return 0;
  }
  theCommands << "Local operation not done";
  return 1;
}

static Standard_Integer HOLE1(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{
  if (narg < 10 || narg == 11)
    return 1;
  TopoDS_Shape S = DBRep::Get(a[2]);

  gp_Pnt Or(Draw::Atof(a[3]), Draw::Atof(a[4]), Draw::Atof(a[5]));
  gp_Dir Di(Draw::Atof(a[6]), Draw::Atof(a[7]), Draw::Atof(a[8]));

  Standard_Real Radius = Draw::Atof(a[9]);

  getHole().Init(S, gp_Ax1(Or, Di));

  if (narg <= 10)
  {
    getHole().Perform(Radius);
  }
  else
  {
    Standard_Real pfrom = Draw::Atof(a[10]);
    Standard_Real pto   = Draw::Atof(a[11]);
    getHole().Perform(Radius, pfrom, pto, WithControl);
  }

  getHole().Build();
  if (!getHole().HasErrors())
  {
    //    dout.Clear();
    DBRep::Set(a[1], getHole().Shape());
    dout.Flush();
    return 0;
  }
  theCommands << "Echec de MakeCylindricalHole";
  Print(theCommands, getHole().Status());
  return 1;
}

static Standard_Integer HOLE2(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{
  if (narg < 10)
    return 1;
  TopoDS_Shape S = DBRep::Get(a[2]);

  gp_Pnt Or(Draw::Atof(a[3]), Draw::Atof(a[4]), Draw::Atof(a[5]));
  gp_Dir Di(Draw::Atof(a[6]), Draw::Atof(a[7]), Draw::Atof(a[8]));

  Standard_Real Radius = Draw::Atof(a[9]);

  getHole().Init(S, gp_Ax1(Or, Di));
  getHole().PerformThruNext(Radius, WithControl);

  getHole().Build();
  if (!getHole().HasErrors())
  {
    //    dout.Clear();
    DBRep::Set(a[1], getHole().Shape());
    dout.Flush();
    return 0;
  }
  theCommands << "Echec de MakeCylindricalHole";
  Print(theCommands, getHole().Status());
  return 1;
}

static Standard_Integer HOLE3(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{
  if (narg < 10)
    return 1;
  TopoDS_Shape S = DBRep::Get(a[2]);

  gp_Pnt Or(Draw::Atof(a[3]), Draw::Atof(a[4]), Draw::Atof(a[5]));
  gp_Dir Di(Draw::Atof(a[6]), Draw::Atof(a[7]), Draw::Atof(a[8]));

  Standard_Real Radius = Draw::Atof(a[9]);

  getHole().Init(S, gp_Ax1(Or, Di));
  getHole().PerformUntilEnd(Radius, WithControl);
  getHole().Build();
  if (!getHole().HasErrors())
  {
    //    dout.Clear();
    DBRep::Set(a[1], getHole().Shape());
    dout.Flush();
    return 0;
  }
  theCommands << "Echec de MakeCylindricalHole";
  Print(theCommands, getHole().Status());
  return 1;
}

static Standard_Integer HOLE4(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{
  if (narg < 11)
    return 1;
  TopoDS_Shape S = DBRep::Get(a[2]);

  gp_Pnt Or(Draw::Atof(a[3]), Draw::Atof(a[4]), Draw::Atof(a[5]));
  gp_Dir Di(Draw::Atof(a[6]), Draw::Atof(a[7]), Draw::Atof(a[8]));

  Standard_Real Radius = Draw::Atof(a[9]);
  Standard_Real Length = Draw::Atof(a[10]);

  getHole().Init(S, gp_Ax1(Or, Di));
  getHole().PerformBlind(Radius, Length, WithControl);
  getHole().Build();
  if (!getHole().HasErrors())
  {
    //    dout.Clear();
    DBRep::Set(a[1], getHole().Shape());
    dout.Flush();
    return 0;
  }
  theCommands << "Echec de MakeCylindricalHole";
  Print(theCommands, getHole().Status());
  return 1;
}

static Standard_Integer CONTROL(Draw_Interpretor& theCommands,
                                Standard_Integer  narg,
                                const char**      a)
{
  if (narg >= 2)
  {
    WithControl = strcmp("0", a[1]) != 0;
  }
  if (WithControl)
  {
    theCommands << "Mode avec controle";
  }
  else
  {
    theCommands << "Mode sans controle";
  }
  return 0;
}

//=======================================================================
// function : reportOffsetState
// purpose  : Print state of offset operation by error code.
//=======================================================================
static void reportOffsetState(Draw_Interpretor& theCommands, const BRepOffset_Error theErrorCode)
{
  switch (theErrorCode)
  {
    case BRepOffset_NoError: {
      theCommands << "OK. Offset performed successfully.";
      break;
    }
    case BRepOffset_BadNormalsOnGeometry: {
      theCommands << "ERROR. Degenerated normal on input data.";
      break;
    }
    case BRepOffset_C0Geometry: {
      theCommands << "ERROR. C0 continuity of input data.";
      break;
    }
    case BRepOffset_NullOffset: {
      theCommands << "ERROR. Null offset of all faces.";
      break;
    }
    case BRepOffset_NotConnectedShell: {
      theCommands
        << "ERROR. Incorrect set of faces to remove, the remaining shell is not connected.";
      break;
    }
    case BRepOffset_CannotTrimEdges: {
      theCommands << "ERROR. Can not trim edges.";
      break;
    }
    case BRepOffset_CannotFuseVertices: {
      theCommands << "ERROR. Can not fuse vertices.";
      break;
    }
    case BRepOffset_CannotExtentEdge: {
      theCommands << "ERROR. Can not extent edge.";
      break;
    }
    case BRepOffset_MixedConnectivity: {
      theCommands << "ERROR. Mixed connectivity of faces.";
      break;
    }
    default: {
      theCommands << "ERROR. offsetperform operation not done.";
      break;
    }
  }
}

//=================================================================================================

static Standard_Integer PRW(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{
  if (narg < 9)
    return 1;
  TopoDS_Shape       S = DBRep::Get(a[3]);
  BRepFeat_MakePrism thePFace;
  gp_Vec             V;
  TopoDS_Shape       FFrom, FUntil;
  Standard_Integer   borne;
  Standard_Boolean   fuse;
  if (a[1][0] == 'f' || a[1][0] == 'F')
  {
    fuse = Standard_True;
  }
  else if (a[1][0] == 'c' || a[1][0] == 'C')
  {
    fuse = Standard_False;
  }
  else
  {
    return 1;
  }

  if (a[4][0] == '.' || IsAlphabetic(a[4][0]))
  {
    if (narg < 10)
    {
      return 1;
    }
    if (a[5][0] == '.' || IsAlphabetic(a[5][0]))
    {
      if (narg < 11)
      {
        return 1;
      }
      V.SetCoord(Draw::Atof(a[6]), Draw::Atof(a[7]), Draw::Atof(a[8]));
      FFrom  = DBRep::Get(a[4], TopAbs_SHAPE);
      FUntil = DBRep::Get(a[5], TopAbs_SHAPE);
      borne  = 9;
    }
    else
    {
      V.SetCoord(Draw::Atof(a[5]), Draw::Atof(a[6]), Draw::Atof(a[7]));
      FUntil = DBRep::Get(a[4], TopAbs_SHAPE);
      borne  = 8;
    }
  }
  else
  {
    V.SetCoord(Draw::Atof(a[4]), Draw::Atof(a[5]), Draw::Atof(a[6]));
    borne = 7;
  }
  Standard_Real Length = V.Magnitude();
  if (Length < Precision::Confusion())
  {
    return 1;
  }

  TopoDS_Shape aLocalShape(DBRep::Get(a[borne], TopAbs_FACE));
  TopoDS_Face  F = TopoDS::Face(aLocalShape);
  //  TopoDS_Face F  = TopoDS::Face(DBRep::Get(a[borne],TopAbs_FACE));
  BRepFeat_SplitShape Spls(F);
  for (Standard_Integer i = borne + 1; i < narg; i++)
  {
    TopoDS_Wire wir;
    if (a[i][0] != '-')
    {
      aLocalShape = DBRep::Get(a[i], TopAbs_WIRE);
      wir         = TopoDS::Wire(aLocalShape);
      //      wir = TopoDS::Wire(DBRep::Get(a[i],TopAbs_WIRE));
    }
    else
    {
      if (a[i][1] == '\0')
        return 1;
      const char* Temp = a[i] + 1;
      aLocalShape      = DBRep::Get(Temp, TopAbs_WIRE);
      wir              = TopoDS::Wire(aLocalShape);
      //      wir = TopoDS::Wire(DBRep::Get(Temp,TopAbs_WIRE));
      wir.Reverse();
    }
    Spls.Add(wir, F);
  }
  Spls.Build();

  TopoDS_Shape                ToPrism;
  const TopTools_ListOfShape& lleft = Spls.DirectLeft();
  if (lleft.Extent() == 1)
  {
    thePFace.Init(S, lleft.First(), F, V, fuse, Standard_True);
    ToPrism = lleft.First();
  }
  else
  {
    BRep_Builder B;
    TopoDS_Shell Sh;
    B.MakeShell(Sh);
    TopTools_ListIteratorOfListOfShape it;
    for (it.Initialize(lleft); it.More(); it.Next())
    {
      B.Add(Sh, TopoDS::Face(it.Value()));
    }
    Sh.Closed(BRep_Tool::IsClosed(Sh));
    thePFace.Init(S, Sh, F, V, fuse, Standard_True);
    ToPrism = Sh;
  }

  // Recherche des faces de glissement, si on n`a pas sketche sur une face
  // du shape de depart

  //  for (TopExp_Explorer exp(S,TopAbs_FACE);exp.More();exp.Next()) {
  TopExp_Explorer exp(S, TopAbs_FACE);
  for (; exp.More(); exp.Next())
  {
    if (exp.Current().IsSame(F))
    {
      break;
    }
  }

  if (!exp.More())
  {
    LocOpe_FindEdgesInFace FEIF;
    for (exp.Init(S, TopAbs_FACE); exp.More(); exp.Next())
    {
      const TopoDS_Face&   fac = TopoDS::Face(exp.Current());
      Handle(Geom_Surface) Su  = BRep_Tool::Surface(fac);
      if (Su->DynamicType() == STANDARD_TYPE(Geom_RectangularTrimmedSurface))
      {
        Su = Handle(Geom_RectangularTrimmedSurface)::DownCast(Su)->BasisSurface();
      }
      if (Su->DynamicType() == STANDARD_TYPE(Geom_Plane))
      {
        gp_Pln pl = Handle(Geom_Plane)::DownCast(Su)->Pln();
        if (pl.Contains(gp_Lin(pl.Location(), V), Precision::Confusion(), Precision::Angular()))
        {
          FEIF.Set(ToPrism, fac);
          for (FEIF.Init(); FEIF.More(); FEIF.Next())
          {
            thePFace.Add(FEIF.Edge(), fac);
          }
        }
      }
      else if (Su->DynamicType() == STANDARD_TYPE(Geom_CylindricalSurface))
      {
        gp_Cylinder cy = Handle(Geom_CylindricalSurface)::DownCast(Su)->Cylinder();
        if (V.IsParallel(cy.Axis().Direction(), Precision::Angular()))
        {
          FEIF.Set(ToPrism, fac);
          for (FEIF.Init(); FEIF.More(); FEIF.Next())
          {
            thePFace.Add(FEIF.Edge(), fac);
          }
        }
      }
    }
  }

  if (borne == 7)
  {
    thePFace.Perform(Length);
  }
  else if (borne == 8)
  {
    thePFace.Perform(FUntil);
  }
  else if (borne == 9)
  {
    if (!(FFrom.IsNull() || FUntil.IsNull()))
    {
      thePFace.Perform(FFrom, FUntil);
    }
    else if (FFrom.IsNull())
    {
      if (!FUntil.IsNull())
      {
        thePFace.PerformFromEnd(FUntil);
      }
      else
      {
        thePFace.PerformThruAll();
      }
    }
    else
    {
      // il faudrait inverser V et appeler PerfomFromEnd...
      // std::cout << "Not Implemented" << std::endl;
      theCommands << "Not Implemented\n";
    }
  }
  if (!thePFace.IsDone())
  {
    theCommands << "Local operation not done";
    return 1;
  }

  DBRep::Set(a[2], thePFace);
  dout.Flush();
  return 0;
}

//=================================================================================================

static Standard_Integer PRF(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{
  if (narg < 8)
    return 1;
  TopoDS_Shape       S = DBRep::Get(a[3]);
  BRepFeat_MakePrism thePFace;
  Standard_Integer   borne;
  gp_Vec             V;
  TopoDS_Shape       FFrom, FUntil;
  Standard_Boolean   fuse;
  if (a[1][0] == 'f' || a[1][0] == 'F')
  {
    fuse = Standard_True;
  }
  else if (a[1][0] == 'c' || a[1][0] == 'C')
  {
    fuse = Standard_False;
  }
  else
  {
    return 1;
  }

  if (a[4][0] == '.' || IsAlphabetic(a[4][0]))
  {
    if (narg < 9)
    {
      return 1;
    }
    if (a[5][0] == '.' || IsAlphabetic(a[5][0]))
    {
      if (narg < 10)
      {
        return 1;
      }
      borne = 9;
      V.SetCoord(Draw::Atof(a[6]), Draw::Atof(a[7]), Draw::Atof(a[8]));
      FFrom  = DBRep::Get(a[4], TopAbs_SHAPE);
      FUntil = DBRep::Get(a[5], TopAbs_SHAPE);
    }
    else
    {
      borne = 8;
      V.SetCoord(Draw::Atof(a[5]), Draw::Atof(a[6]), Draw::Atof(a[7]));
      FUntil = DBRep::Get(a[4], TopAbs_SHAPE);
    }
  }
  else
  {
    borne = 7;
    V.SetCoord(Draw::Atof(a[4]), Draw::Atof(a[5]), Draw::Atof(a[6]));
  }
  Standard_Real Length = V.Magnitude();
  if (Length < Precision::Confusion())
  {
    return 1;
  }

  TopoDS_Shape ToPrism;
  if (narg == borne + 1)
  {
    TopoDS_Shape aLocalShape(DBRep::Get(a[borne], TopAbs_FACE));
    TopoDS_Face  F = TopoDS::Face(aLocalShape);
    //    TopoDS_Face F  = TopoDS::Face(DBRep::Get(a[borne],TopAbs_FACE));
    thePFace.Init(S, F, F, V, fuse, Standard_True);
    ToPrism = F;
  }
  else
  {
    TopoDS_Shell She;
    BRep_Builder B;
    B.MakeShell(She);
    for (Standard_Integer i = borne; i < narg; i++)
    {
      TopoDS_Shape aLocalShape(DBRep::Get(a[i], TopAbs_FACE));
      TopoDS_Face  F = TopoDS::Face(aLocalShape);
      //      TopoDS_Face F  = TopoDS::Face(DBRep::Get(a[i],TopAbs_FACE));
      if (!F.IsNull())
      {
        B.Add(She, F);
      }
    }
    She.Closed(BRep_Tool::IsClosed(She));
    thePFace.Init(S, She, TopoDS_Face(), V, fuse, Standard_False);
    ToPrism = She;
  }

  // Recherche des faces de glissement, on ne prisme pas une face
  // du shape de depart

  //  for (TopExp_Explorer exp(ToPrism,TopAbs_FACE);exp.More();exp.Next()) {
  TopExp_Explorer exp(ToPrism, TopAbs_FACE);
  for (; exp.More(); exp.Next())
  {
    //    for (TopExp_Explorer exp2(S,TopAbs_FACE);exp2.More();exp2.Next()) {
    TopExp_Explorer exp2(S, TopAbs_FACE);
    for (; exp2.More(); exp2.Next())
    {
      if (exp2.Current().IsSame(exp.Current()))
      {
        break;
      }
    }
    if (exp2.More())
    {
      break;
    }
  }

  if (!exp.More())
  {
    LocOpe_FindEdgesInFace FEIF;
    for (exp.Init(S, TopAbs_FACE); exp.More(); exp.Next())
    {
      const TopoDS_Face&   fac = TopoDS::Face(exp.Current());
      Handle(Geom_Surface) Su  = BRep_Tool::Surface(fac);
      if (Su->DynamicType() == STANDARD_TYPE(Geom_RectangularTrimmedSurface))
      {
        Su = Handle(Geom_RectangularTrimmedSurface)::DownCast(Su)->BasisSurface();
      }
      if (Su->DynamicType() == STANDARD_TYPE(Geom_Plane))
      {
        gp_Pln pl = Handle(Geom_Plane)::DownCast(Su)->Pln();
        if (pl.Contains(gp_Lin(pl.Location(), V), Precision::Confusion(), Precision::Angular()))
        {
          FEIF.Set(ToPrism, fac);
          for (FEIF.Init(); FEIF.More(); FEIF.Next())
          {
            thePFace.Add(FEIF.Edge(), fac);
          }
        }
      }
      else if (Su->DynamicType() == STANDARD_TYPE(Geom_CylindricalSurface))
      {
        gp_Cylinder cy = Handle(Geom_CylindricalSurface)::DownCast(Su)->Cylinder();
        if (V.IsParallel(cy.Axis().Direction(), Precision::Angular()))
        {
          FEIF.Set(ToPrism, fac);
          for (FEIF.Init(); FEIF.More(); FEIF.Next())
          {
            thePFace.Add(FEIF.Edge(), fac);
          }
        }
      }
    }
  }

  if (borne == 7)
  {
    thePFace.Perform(Length);
  }
  else if (borne == 8)
  {
    thePFace.Perform(FUntil);
  }
  else if (borne == 9)
  {
    if (!(FFrom.IsNull() || FUntil.IsNull()))
    {
      thePFace.Perform(FFrom, FUntil);
    }
    else if (FFrom.IsNull())
    {
      if (!FUntil.IsNull())
      {
        thePFace.PerformFromEnd(FUntil);
      }
      else
      {
        thePFace.PerformThruAll();
      }
    }
    else
    { // FUntil.IsNull()
      // il faudrait inverser V et appeler PerfomFromEnd...
      // std::cout << "Not Implemented" << std::endl;
      theCommands << "Not Implemented\n";
    }
  }
  if (!thePFace.IsDone())
  {
    theCommands << "Local operation not done";
    return 1;
  }

  DBRep::Set(a[2], thePFace);
  dout.Flush();
  return 0;
}

//=================================================================================================

static Standard_Integer SPLS(Draw_Interpretor&, Standard_Integer narg, const char** a)
{
  Standard_Integer newnarg;

  if (narg < 3)
  {
    Message::SendFail()
      << "Invalid number of arguments. Should be : splitshape result shape [splitedges] "
         "[face wire/edge/compound [wire/edge/compound ...] "
         "[face wire/edge/compound [wire/edge/compound...] ...] "
         "[@ edgeonshape edgeonwire [edgeonshape edgeonwire...]]";
    return 1;
  }
  TopoDS_Shape S = DBRep::Get(a[2]);
  if (S.IsNull())
  {
    Message::SendFail() << "Invalid input shape " << a[2];
    return 1;
  }
  BRepFeat_SplitShape Spls(S);
  Standard_Boolean    pick = Standard_False;
  TopoDS_Shape        EF;
  Standard_Real       u, v;
  Standard_Integer    i = 3;

  for (newnarg = 3; newnarg < narg; newnarg++)
  {
    if (a[newnarg][0] == '@')
    {
      break;
    }
  }

  if (newnarg == 3 || (newnarg != narg && ((narg - newnarg) <= 2 || (narg - newnarg) % 2 != 1)))
  {
    return 1;
  }
  Standard_Boolean         isSplittingEdges = Standard_False;
  TopTools_SequenceOfShape aSplitEdges;
  if (i < newnarg)
  {
    pick = (a[i][0] == '.');

    TopoDS_Shape aSh = DBRep::Get(a[i]);
    if (aSh.IsNull())
    {
      Message::SendFail() << "Invalid input shape " << a[i];
      return 1;
    }

    if (aSh.ShapeType() == TopAbs_FACE)
      EF = TopoDS::Face(aSh);
    else
    {
      if (aSh.ShapeType() == TopAbs_COMPOUND || aSh.ShapeType() == TopAbs_WIRE
          || aSh.ShapeType() == TopAbs_EDGE)
      {
        TopExp_Explorer aExpE(aSh, TopAbs_EDGE, TopAbs_FACE);
        for (; aExpE.More(); aExpE.Next())
          aSplitEdges.Append(aExpE.Current());

        isSplittingEdges = !aSplitEdges.IsEmpty();
      }
    }
  }
  i++;
  while (i < newnarg)
  {
    if (pick)
    {
      DBRep_DrawableShape::LastPick(EF, u, v);
    }
    if (!isSplittingEdges && !EF.IsNull() && EF.ShapeType() == TopAbs_FACE)
    {
      // face wire/edge ...

      while (i < newnarg)
      {
        TopoDS_Shape     W;
        Standard_Boolean rever = Standard_False;
        if (a[i][0] == '-')
        {
          if (a[i][1] == '\0')
            return 1;
          pick             = (a[i][1] == '.');
          const char* Temp = a[i] + 1;
          W                = DBRep::Get(Temp, TopAbs_SHAPE, Standard_False);
          rever            = Standard_True;
        }
        else
        {
          pick = (a[i][0] == '.');
          W    = DBRep::Get(a[i], TopAbs_SHAPE, Standard_False);
        }
        if (W.IsNull())
        {
          return 1; // on n`a rien recupere
        }
        TopAbs_ShapeEnum wtyp = W.ShapeType();
        if (wtyp != TopAbs_WIRE && wtyp != TopAbs_EDGE && wtyp != TopAbs_COMPOUND && pick)
        {
          DBRep_DrawableShape::LastPick(W, u, v);
          wtyp = W.ShapeType();
        }
        if (wtyp != TopAbs_WIRE && wtyp != TopAbs_EDGE && wtyp != TopAbs_COMPOUND)
        {
          EF = DBRep::Get(a[i]);
          break;
        }
        else
        {
          if (rever)
          {
            W.Reverse();
          }
          if (wtyp == TopAbs_WIRE)
          {
            Spls.Add(TopoDS::Wire(W), TopoDS::Face(EF));
          }
          else if (wtyp == TopAbs_EDGE)
          {
            Spls.Add(TopoDS::Edge(W), TopoDS::Face(EF));
          }
          else
          {
            Spls.Add(TopoDS::Compound(W), TopoDS::Face(EF));
          }
        }
        i++;
      }
    }
    else
    {
      if (isSplittingEdges)
      {
        TopoDS_Shape aSh = DBRep::Get(a[i]);
        if (aSh.IsNull())
        {
          Message::SendFail() << "Invalid input shape " << a[i];
          return 1;
        }
        TopExp_Explorer aExpE(aSh, TopAbs_EDGE, TopAbs_FACE);
        for (; aExpE.More(); aExpE.Next())
          aSplitEdges.Append(aExpE.Current());
      }
      else
      {
        Message::SendFail()
          << "Invalid input arguments. Should be : splitshape result shape [splitedges] "
             "[face wire/edge/compound [wire/edge/compound ...] "
             "[face wire/edge/compound [wire/edge/compound...] ...] "
             "[@ edgeonshape edgeonwire [edgeonshape edgeonwire...]]";
        return 1;
      }
    }
    i++;
  }

  if (isSplittingEdges)
    Spls.Add(aSplitEdges);

  // ici, i vaut newnarg
  for (; i < narg; i += 2)
  {
    TopoDS_Shape Ew, Es;
    TopoDS_Shape aLocalShape(DBRep::Get(a[i], TopAbs_EDGE));
    Es = TopoDS::Edge(aLocalShape);
    //    Es = TopoDS::Edge(DBRep::Get(a[i],TopAbs_EDGE));
    if (Es.IsNull())
    {
      return 1;
    }
    aLocalShape = DBRep::Get(a[i + 1], TopAbs_EDGE);
    Ew          = TopoDS::Edge(aLocalShape);
    //    Ew = TopoDS::Edge(DBRep::Get(a[i+1],TopAbs_EDGE));
    if (Ew.IsNull())
    {
      Message::SendFail() << "Invalid input shape " << a[i + 1];
      return 1;
    }
    Spls.Add(TopoDS::Edge(Ew), TopoDS::Edge(Es));
  }

  DBRep::Set(a[1], Spls);
  return 0;
}

//=================================================================================================

Standard_Integer thickshell(Draw_Interpretor& theCommands, Standard_Integer n, const char** a)
{
  if (n < 4)
    return 1;
  TopoDS_Shape S = DBRep::Get(a[2]);
  if (S.IsNull())
    return 1;

  Standard_Real Of = Draw::Atof(a[3]);

  GeomAbs_JoinType JT = GeomAbs_Arc;
  if (n > 4)
  {
    if (!strcmp(a[4], "i"))
      JT = GeomAbs_Intersection;
    if (!strcmp(a[4], "t"))
      JT = GeomAbs_Tangent;
  }

  Standard_Boolean Inter = Standard_False; // Standard_True;
  Standard_Real    Tol   = Precision::Confusion();
  if (n > 5)
    Tol = Draw::Atof(a[5]);

  Handle(Draw_ProgressIndicator) aProgress = new Draw_ProgressIndicator(theCommands, 1);

  BRepOffset_MakeOffset B;
  B.Initialize(S, Of, Tol, BRepOffset_Skin, Inter, 0, JT, Standard_True);

  B.MakeOffsetShape(aProgress->Start());

  const BRepOffset_Error aRetCode = B.Error();
  reportOffsetState(theCommands, aRetCode);

  if (!B.Shape().IsNull())
  {
    DBRep::Set(a[1], B.Shape());
  }
  return 0;
}

//=================================================================================================

static Standard_Integer mkoffsetshape(Draw_Interpretor& theDI,
                                      Standard_Integer  theArgNb,
                                      const char**      theArgVec)
{
  if (theArgNb < 4)
  {
    return 0;
  }
  TopoDS_Shape aShape = DBRep::Get(theArgVec[2]);
  if (aShape.IsNull())
  {
    theDI << "Shape is null";
    return 1;
  }
  Standard_Real                 anOffVal = Draw::Atof(theArgVec[3]);
  BRepOffsetAPI_MakeOffsetShape aMaker;
  if (theArgNb == 4)
  {
    aMaker.PerformBySimple(aShape, anOffVal);
  }
  else
  {
    Standard_Real aTol = Draw::Atof(theArgVec[4]);

    Standard_Boolean anInt = Standard_False;
    if (theArgNb > 5)
    {
      if ((Draw::Atof(theArgVec[5]) == 1))
      {
        anInt = Standard_True;
      }
    }

    Standard_Boolean aSelfInt = Standard_False;
    if (theArgNb > 6)
    {
      if (Draw::Atof(theArgVec[6]) == 1)
      {
        aSelfInt = Standard_True;
      }
    }

    GeomAbs_JoinType aJoin = GeomAbs_Arc;
    if (theArgNb > 7)
    {
      if (!strcmp(theArgVec[7], "i"))
      {
        aJoin = GeomAbs_Intersection;
      }
    }

    Standard_Boolean aRemIntEdges = Standard_False;
    if (theArgNb > 8)
    {
      if (Draw::Atof(theArgVec[8]) == 1)
      {
        aRemIntEdges = Standard_True;
      }
    }
    aMaker
      .PerformByJoin(aShape, anOffVal, aTol, BRepOffset_Skin, anInt, aSelfInt, aJoin, aRemIntEdges);
  }

  if (!aMaker.IsDone())
  {
    theDI << " Error: Offset is not done.\n";
    return 1;
  }
  DBRep::Set(theArgVec[1], aMaker.Shape());
  return 0;
}

//=================================================================================================

Standard_Integer offsetshape(Draw_Interpretor& theCommands, Standard_Integer n, const char** a)
{
  if (n < 4)
    return 1;
  TopoDS_Shape S = DBRep::Get(a[2]);
  if (S.IsNull())
    return 1;

  Standard_Real    Of    = Draw::Atof(a[3]);
  Standard_Boolean Inter = (!strcmp(a[0], "offsetcompshape"));
  GeomAbs_JoinType JT    = GeomAbs_Arc;
  if (!strcmp(a[0], "offsetinter"))
  {
    JT    = GeomAbs_Intersection;
    Inter = Standard_True;
  }

  BRepOffset_MakeOffset B;
  Standard_Integer      IB  = 4;
  Standard_Real         Tol = Precision::Confusion();
  if (n > 4)
  {
    TopoDS_Shape SF = DBRep::Get(a[4], TopAbs_FACE);
    if (SF.IsNull())
    {
      IB  = 5;
      Tol = Draw::Atof(a[4]);
    }
  }
  B.Initialize(S, Of, Tol, BRepOffset_Skin, Inter, 0, JT);
  //------------------------------------------
  // recuperation et chargement des bouchons.
  //----------------------------------------
  Standard_Boolean YaBouchon = Standard_False;

  for (Standard_Integer i = IB; i < n; i++)
  {
    TopoDS_Shape SF = DBRep::Get(a[i], TopAbs_FACE);
    if (!SF.IsNull())
    {
      YaBouchon = Standard_True;
      B.AddFace(TopoDS::Face(SF));
    }
  }

  Handle(Draw_ProgressIndicator) aProgress = new Draw_ProgressIndicator(theCommands, 1);
  if (!YaBouchon)
    B.MakeOffsetShape(aProgress->Start());
  else
    B.MakeThickSolid(aProgress->Start());

  const BRepOffset_Error aRetCode = B.Error();
  reportOffsetState(theCommands, aRetCode);

  if (!B.Shape().IsNull())
  {
    DBRep::Set(a[1], B.Shape());
  }

  return 0;
}

static BRepOffset_MakeOffset TheOffset;
static Standard_Real         TheRadius;
static Standard_Boolean      theYaBouchon;
static Standard_Real         TheTolerance   = Precision::Confusion();
static Standard_Boolean      TheInter       = Standard_False;
static GeomAbs_JoinType      TheJoin        = GeomAbs_Arc;
static Standard_Boolean      RemoveIntEdges = Standard_False;

Standard_Integer offsetparameter(Draw_Interpretor& di, Standard_Integer n, const char** a)
{
  if (n == 1)
  {
    di << " offsetparameter Tol Inter(c/p) JoinType(a/i/t) [RemoveInternalEdges(r/k)]\n";
    di << " Current Values\n";
    di << "   --> Tolerance : " << TheTolerance << "\n";
    di << "   --> TheInter  : ";
    if (TheInter)
    {
      di << "Complete";
    }
    else
    {
      di << "Partial";
    }
    di << "\n   --> TheJoin   : ";

    switch (TheJoin)
    {
      case GeomAbs_Arc:
        di << "Arc";
        break;
      case GeomAbs_Intersection:
        di << "Intersection";
        break;
      default:
        break;
    }
    //
    di << "\n   --> Internal Edges : ";
    if (RemoveIntEdges)
    {
      di << "Remove";
    }
    else
    {
      di << "Keep";
    }
    di << "\n";
    //
    return 0;
  }

  if (n < 4)
    return 1;
  //
  TheTolerance = Draw::Atof(a[1]);
  TheInter     = strcmp(a[2], "p") != 0;
  //
  if (!strcmp(a[3], "a"))
    TheJoin = GeomAbs_Arc;
  else if (!strcmp(a[3], "i"))
    TheJoin = GeomAbs_Intersection;
  else if (!strcmp(a[3], "t"))
    TheJoin = GeomAbs_Tangent;
  //
  RemoveIntEdges = (n >= 5) ? !strcmp(a[4], "r") : Standard_False;
  //
  return 0;
}

//=================================================================================================

Standard_Integer offsetload(Draw_Interpretor&, Standard_Integer n, const char** a)
{
  if (n < 2)
    return 1;
  TopoDS_Shape S = DBRep::Get(a[1]);
  if (S.IsNull())
    return 1;

  Standard_Real Of = Draw::Atof(a[2]);
  TheRadius        = Of;
  //  Standard_Boolean Inter = Standard_True;

  TheOffset.Initialize(S,
                       Of,
                       TheTolerance,
                       BRepOffset_Skin,
                       TheInter,
                       0,
                       TheJoin,
                       Standard_False,
                       RemoveIntEdges);
  //------------------------------------------
  // recuperation et chargement des bouchons.
  //----------------------------------------
  for (Standard_Integer i = 3; i < n; i++)
  {
    TopoDS_Shape SF = DBRep::Get(a[i], TopAbs_FACE);
    if (!SF.IsNull())
    {
      TheOffset.AddFace(TopoDS::Face(SF));
    }
  }
  if (n < 4)
    theYaBouchon = Standard_False; // B.MakeOffsetShape();
  else
    theYaBouchon = Standard_True; // B.MakeThickSolid ();

  return 0;
}

//=================================================================================================

Standard_Integer offsetonface(Draw_Interpretor&, Standard_Integer n, const char** a)
{
  if (n < 3)
    return 1;

  for (Standard_Integer i = 1; i < n; i += 2)
  {
    TopoDS_Shape SF = DBRep::Get(a[i], TopAbs_FACE);
    if (!SF.IsNull())
    {
      Standard_Real Of = Draw::Atof(a[i + 1]);
      TheOffset.SetOffsetOnFace(TopoDS::Face(SF), Of);
    }
  }

  return 0;
}

//=================================================================================================

Standard_Integer offsetperform(Draw_Interpretor& theCommands,
                               Standard_Integer  theNArg,
                               const char**      a)
{
  if (theNArg < 2)
    return 1;

  Handle(Draw_ProgressIndicator) aProgress = new Draw_ProgressIndicator(theCommands, 1);
  if (theYaBouchon)
    TheOffset.MakeThickSolid(aProgress->Start());
  else
    TheOffset.MakeOffsetShape(aProgress->Start());

  if (TheOffset.IsDone())
  {
    DBRep::Set(a[1], TheOffset.Shape());
  }
  else
  {
    const BRepOffset_Error aRetCode = TheOffset.Error();
    reportOffsetState(theCommands, aRetCode);
  }

  // Store the history of Boolean operation into the session
  if (BRepTest_Objects::IsHistoryNeeded())
  {
    TopTools_ListOfShape aLA;
    aLA.Append(TheOffset.InitShape());
    BRepTest_Objects::SetHistory<BRepOffset_MakeOffset>(aLA, TheOffset);
  }

  return 0;
}

//=================================================================================================

static Standard_Integer ROW(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{
  if (narg < 13)
    return 1;
  TopoDS_Shape       S = DBRep::Get(a[3]);
  BRepFeat_MakeRevol theRFace;
  gp_Dir             D;
  gp_Pnt             Or;
  Standard_Real      Angle = 0;
  TopoDS_Shape       FFrom, FUntil;
  Standard_Integer   i, borne;
  Standard_Boolean   fuse;

  if (a[1][0] == 'f' || a[1][0] == 'F')
  {
    fuse = Standard_True;
  }
  else if (a[1][0] == 'c' || a[1][0] == 'C')
  {
    fuse = Standard_False;
  }
  else
  {
    return 1;
  }

  FFrom = DBRep::Get(a[4], TopAbs_SHAPE);
  if (FFrom.IsNull())
  {
    Angle = Draw::Atof(a[4]);
    Angle *= M_PI / 180.;
    i = 5;
  }
  else
  {
    FUntil = DBRep::Get(a[5], TopAbs_SHAPE);
    if (FUntil.IsNull())
    {
      i      = 5;
      FUntil = FFrom;
      FFrom.Nullify();
    }
    else
    {
      if (narg < 14)
      {
        return 1;
      }
      i = 6;
    }
  }
  borne = i + 6;

  Or.SetCoord(Draw::Atof(a[i]), Draw::Atof(a[i + 1]), Draw::Atof(a[i + 2]));
  D.SetCoord(Draw::Atof(a[i + 3]), Draw::Atof(a[i + 4]), Draw::Atof(a[i + 5]));
  gp_Ax1 theAxis(Or, D);

  TopoDS_Shape aLocalShape(DBRep::Get(a[borne], TopAbs_FACE));
  TopoDS_Face  F = TopoDS::Face(aLocalShape);
  //  TopoDS_Face F  = TopoDS::Face(DBRep::Get(a[borne],TopAbs_FACE));
  BRepFeat_SplitShape Spls(F);
  for (i = borne + 1; i < narg; i++)
  {
    TopoDS_Wire wir;
    if (a[i][0] != '-')
    {
      aLocalShape = DBRep::Get(a[i], TopAbs_WIRE);
      wir         = TopoDS::Wire(aLocalShape);
      //      wir = TopoDS::Wire(DBRep::Get(a[i],TopAbs_WIRE));
    }
    else
    {
      if (a[i][1] == '\0')
        return 1;
      const char* Temp = a[i] + 1;
      aLocalShape      = DBRep::Get(Temp, TopAbs_WIRE);
      wir              = TopoDS::Wire(aLocalShape);
      //      wir = TopoDS::Wire(DBRep::Get(Temp,TopAbs_WIRE));
      wir.Reverse();
    }
    Spls.Add(wir, F);
  }
  Spls.Build();

  TopoDS_Shape                ToRotate;
  const TopTools_ListOfShape& lleft = Spls.DirectLeft();
  if (lleft.Extent() == 1)
  {
    theRFace.Init(S, lleft.First(), F, theAxis, fuse, Standard_True);
    ToRotate = lleft.First();
  }
  else
  {
    BRep_Builder B;
    TopoDS_Shell Sh;
    B.MakeShell(Sh);
    TopTools_ListIteratorOfListOfShape it;
    for (it.Initialize(lleft); it.More(); it.Next())
    {
      B.Add(Sh, TopoDS::Face(it.Value()));
    }
    Sh.Closed(BRep_Tool::IsClosed(Sh));
    theRFace.Init(S, Sh, F, theAxis, fuse, Standard_True);
    ToRotate = Sh;
  }

  // Recherche des faces de glissement
  //  for (TopExp_Explorer exp(S,TopAbs_FACE);exp.More();exp.Next()) {
  TopExp_Explorer exp(S, TopAbs_FACE);
  for (; exp.More(); exp.Next())
  {
    if (exp.Current().IsSame(F))
    {
      break;
    }
  }

  if (!exp.More())
  {
    LocOpe_FindEdgesInFace FEIF;
    for (exp.Init(S, TopAbs_FACE); exp.More(); exp.Next())
    {
      const TopoDS_Face&   fac = TopoDS::Face(exp.Current());
      Handle(Geom_Surface) Su  = BRep_Tool::Surface(fac);
      if (Su->DynamicType() == STANDARD_TYPE(Geom_RectangularTrimmedSurface))
      {
        Su = Handle(Geom_RectangularTrimmedSurface)::DownCast(Su)->BasisSurface();
      }
      if (Su->DynamicType() == STANDARD_TYPE(Geom_Plane))
      {
        gp_Pln pl = Handle(Geom_Plane)::DownCast(Su)->Pln();
        if (pl.Axis().IsParallel(theAxis, Precision::Angular()))
        {
          FEIF.Set(ToRotate, fac);
          for (FEIF.Init(); FEIF.More(); FEIF.Next())
          {
            theRFace.Add(FEIF.Edge(), fac);
          }
        }
      }
      else if (Su->DynamicType() == STANDARD_TYPE(Geom_CylindricalSurface))
      {
        gp_Cylinder cy = Handle(Geom_CylindricalSurface)::DownCast(Su)->Cylinder();
        if (cy.Axis().IsCoaxial(theAxis, Precision::Angular(), Precision::Confusion()))
        {
          FEIF.Set(ToRotate, fac);
          for (FEIF.Init(); FEIF.More(); FEIF.Next())
          {
            theRFace.Add(FEIF.Edge(), fac);
          }
        }
      }
    }
  }

  if (borne == 11)
  {
    if (FUntil.IsNull())
    {
      theRFace.Perform(Angle);
    }
    else
    {
      theRFace.Perform(FUntil);
    }
  }
  else
  { // borne == 12
    theRFace.Perform(FFrom, FUntil);
  }

  if (!theRFace.IsDone())
  {
    theCommands << "Local operation not done";
    return 1;
  }

  DBRep::Set(a[2], theRFace);
  dout.Flush();
  return 0;
}

//=================================================================================================

static Standard_Integer ROF(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{
  if (narg < 12)
    return 1;
  TopoDS_Shape       S = DBRep::Get(a[3]);
  BRepFeat_MakeRevol theRFace;
  gp_Dir             D;
  gp_Pnt             Or;
  Standard_Real      Angle = 0;
  TopoDS_Shape       FFrom, FUntil;
  Standard_Integer   i, borne;
  Standard_Boolean   fuse;

  if (a[1][0] == 'f' || a[1][0] == 'F')
  {
    fuse = Standard_True;
  }
  else if (a[1][0] == 'c' || a[1][0] == 'C')
  {
    fuse = Standard_False;
  }
  else
  {
    return 1;
  }

  FFrom = DBRep::Get(a[4], TopAbs_SHAPE);
  if (FFrom.IsNull())
  {
    Angle = Draw::Atof(a[4]);
    Angle *= M_PI / 180.;
    i = 5;
  }
  else
  {
    FUntil = DBRep::Get(a[5], TopAbs_SHAPE);
    if (FUntil.IsNull())
    {
      i      = 5;
      FUntil = FFrom;
      FFrom.Nullify();
    }
    else
    {
      if (narg < 13)
      {
        return 1;
      }
      i = 6;
    }
  }

  borne = i + 6;
  Or.SetCoord(Draw::Atof(a[i]), Draw::Atof(a[i + 1]), Draw::Atof(a[i + 2]));
  D.SetCoord(Draw::Atof(a[i + 3]), Draw::Atof(a[i + 4]), Draw::Atof(a[i + 5]));
  gp_Ax1 theAxis(Or, D);

  TopoDS_Shape ToRotate;
  if (narg == borne + 1)
  {
    TopoDS_Shape aLocalShape(DBRep::Get(a[borne], TopAbs_FACE));
    TopoDS_Face  F = TopoDS::Face(aLocalShape);
    //    TopoDS_Face F  = TopoDS::Face(DBRep::Get(a[borne],TopAbs_FACE));
    theRFace.Init(S, F, F, theAxis, fuse, Standard_True);
    ToRotate = F;
  }
  else
  {
    TopoDS_Shell She;
    BRep_Builder B;
    B.MakeShell(She);

    for (i = borne; i < narg; i++)
    {
      TopoDS_Shape aLocalShape(DBRep::Get(a[i], TopAbs_FACE));
      TopoDS_Face  F = TopoDS::Face(aLocalShape);
      //      TopoDS_Face F  = TopoDS::Face(DBRep::Get(a[i],TopAbs_FACE));
      if (!F.IsNull())
      {
        B.Add(She, F);
      }
    }
    She.Closed(BRep_Tool::IsClosed(She));
    theRFace.Init(S, She, TopoDS_Face(), theAxis, fuse, Standard_False);
    ToRotate = She;
  }

  //  for (TopExp_Explorer exp(ToRotate,TopAbs_FACE);exp.More();exp.Next()) {
  TopExp_Explorer exp(ToRotate, TopAbs_FACE);
  for (; exp.More(); exp.Next())
  {
    //    for (TopExp_Explorer exp2(S,TopAbs_FACE);exp2.More();exp2.Next()) {
    TopExp_Explorer exp2(S, TopAbs_FACE);
    for (; exp2.More(); exp2.Next())
    {
      if (exp2.Current().IsSame(exp.Current()))
      {
        break;
      }
    }
    if (exp2.More())
    {
      break;
    }
  }

  if (!exp.More())
  {
    LocOpe_FindEdgesInFace FEIF;
    for (exp.Init(S, TopAbs_FACE); exp.More(); exp.Next())
    {
      const TopoDS_Face&   fac = TopoDS::Face(exp.Current());
      Handle(Geom_Surface) Su  = BRep_Tool::Surface(fac);
      if (Su->DynamicType() == STANDARD_TYPE(Geom_RectangularTrimmedSurface))
      {
        Su = Handle(Geom_RectangularTrimmedSurface)::DownCast(Su)->BasisSurface();
      }
      if (Su->DynamicType() == STANDARD_TYPE(Geom_Plane))
      {
        gp_Pln pl = Handle(Geom_Plane)::DownCast(Su)->Pln();
        if (pl.Axis().IsParallel(theAxis, Precision::Angular()))
        {
          FEIF.Set(ToRotate, fac);
          for (FEIF.Init(); FEIF.More(); FEIF.Next())
          {
            theRFace.Add(FEIF.Edge(), fac);
          }
        }
      }
      else if (Su->DynamicType() == STANDARD_TYPE(Geom_CylindricalSurface))
      {
        gp_Cylinder cy = Handle(Geom_CylindricalSurface)::DownCast(Su)->Cylinder();
        if (cy.Axis().IsCoaxial(theAxis, Precision::Angular(), Precision::Confusion()))
        {
          FEIF.Set(ToRotate, fac);
          for (FEIF.Init(); FEIF.More(); FEIF.Next())
          {
            theRFace.Add(FEIF.Edge(), fac);
          }
        }
      }
    }
  }

  if (borne == 11)
  {
    if (FUntil.IsNull())
    {
      theRFace.Perform(Angle);
    }
    else
    {
      theRFace.Perform(FUntil);
    }
  }
  else
  { // borne == 12
    theRFace.Perform(FFrom, FUntil);
  }

  if (!theRFace.IsDone())
  {
    theCommands << "Local operation not done";
    return 1;
  }

  DBRep::Set(a[2], theRFace);
  dout.Flush();
  return 0;
}

//=======================================================================
// function : GLU
// purpose  : Commande glue
//=======================================================================

static Standard_Integer GLU(Draw_Interpretor&, Standard_Integer narg, const char** a)
{
  if (narg < 6 || narg % 2 != 0)
    return 1;
  TopoDS_Shape Sne = DBRep::Get(a[2]);
  TopoDS_Shape Sba = DBRep::Get(a[3]);

  Standard_Boolean pick;

  BRepFeat_Gluer theGl(Sne, Sba);
  TopoDS_Shape   Fne, Fba;

  LocOpe_FindEdges fined;

  Standard_Integer i     = 4;
  Standard_Boolean first = Standard_True;
  while (i < narg)
  {
    pick = (a[i][0] == '.');
    Fne  = DBRep::Get(a[i]);
    if (Fne.IsNull())
    {
      return 1;
    }
    TopAbs_ShapeEnum sht = Fne.ShapeType();
    if (pick && sht != TopAbs_FACE && sht != TopAbs_EDGE)
    {
      Standard_Real u, v;
      DBRep_DrawableShape::LastPick(Fne, u, v);
      sht = Fne.ShapeType();
    }
    if (first && sht != TopAbs_FACE)
    {
      return 1;
    }
    first = Standard_False;
    pick  = (a[i + 1][0] == '.');
    Fba   = DBRep::Get(a[i + 1]);
    if (Fba.IsNull())
    {
      return 1;
    }
    if (pick && Fba.ShapeType() != sht)
    {
      Standard_Real u, v;
      DBRep_DrawableShape::LastPick(Fba, u, v);
    }
    if (Fba.ShapeType() != sht)
    {
      return 1;
    }
    if (sht == TopAbs_FACE)
    {
      const TopoDS_Face& f1 = TopoDS::Face(Fne);
      const TopoDS_Face& f2 = TopoDS::Face(Fba);
      theGl.Bind(f1, f2);
      fined.Set(Fne, Fba);
      for (fined.InitIterator(); fined.More(); fined.Next())
      {
        theGl.Bind(fined.EdgeFrom(), fined.EdgeTo());
      }
    }
    else
    {
      theGl.Bind(TopoDS::Edge(Fne), TopoDS::Edge(Fba));
    }
    i += 2;
  }

  DBRep::Set(a[1], theGl);
  dout.Flush();
  return 0;
}

static Standard_Integer DEFIN(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{

  if (strcasecmp(a[0], "FEATPRISM") && strcasecmp(a[0], "FEATDPRISM")
      && strcasecmp(a[0], "FEATREVOL") && strcasecmp(a[0], "FEATPIPE") && strcasecmp(a[0], "FEATLF")
      && strcasecmp(a[0], "FEATRF"))
  {
    return 1;
  }

  if ((!strcasecmp(a[0], "FEATPRISM") && narg != 9)
      || (!strcasecmp(a[0], "FEATREVOL") && narg != 12)
      || (!strcasecmp(a[0], "FEATDPRISM") && narg != 7)
      || (!strcasecmp(a[0], "FEATPIPE") && narg != 7) || (!strcasecmp(a[0], "FEATLF") && narg != 12)
      || (!strcasecmp(a[0], "FEATRF") && narg != 14))
  {
    theCommands << "invalid number of arguments";
    return 1;
  }

  TopoDS_Shape Sbase = DBRep::Get(a[1]);
  if (Sbase.IsNull())
  {
    theCommands << "null basis shape";
    return 1;
  }
  Standard_Integer Ifuse  = Draw::Atoi(a[narg - 2]);
  Standard_Integer Imodif = Draw::Atoi(a[narg - 1]);

  Standard_Integer Fuse   = Ifuse;
  Standard_Boolean Modify = (Imodif != 0);

  TopoDS_Shape Pbase;
  TopoDS_Face  Skface;
  TopoDS_Wire  W;

  Handle(Geom_Plane) P;

  BRepFeat_StatusError se;

  if (strcasecmp(a[0], "FEATLF") && strcasecmp(a[0], "FEATRF"))
  {
    Pbase = DBRep::Get(a[2]);
    if (Pbase.IsNull())
    {
      theCommands << "null shape to transform";
      return 1;
    }
    TopoDS_Shape aLocalShape(DBRep::Get(a[3], TopAbs_FACE));
    Skface = TopoDS::Face(aLocalShape);
    //    Skface = TopoDS::Face(DBRep::Get(a[3],TopAbs_FACE));
    if (Skface.IsNull())
    {
      theCommands << "null face of Sketch";
      return 1;
    }
  }
  else
  {
    TopoDS_Shape aLocalShape(DBRep::Get(a[2], TopAbs_WIRE));
    W = TopoDS::Wire(aLocalShape);
    //    W = TopoDS::Wire(DBRep::Get(a[2], TopAbs_WIRE));
    if (W.IsNull())
    {
      theCommands << "null profile for rib or slot";
      return 1;
    }
    Handle(Geom_Surface) s = DrawTrSurf::GetSurface(a[3]);
    P                      = Handle(Geom_Plane)::DownCast(s);
    if (P.IsNull())
    {
      theCommands << "null plane to transform";
      return 1;
    }
  }
  if (narg == 9 || narg == 12 || narg == 14)
  {
    //    Standard_Real X,Y,Z,X1,Y1,Z1;
    Standard_Real X, Y, Z;
    X = Draw::Atof(a[4]);
    Y = Draw::Atof(a[5]);
    Z = Draw::Atof(a[6]);

    if (narg == 9)
    { // prism
      prdef     = Standard_True;
      theSbase  = Sbase;
      thePbase  = Pbase;
      theSkface = Skface;
      getPrism().Init(Sbase, Pbase, Skface, gp_Dir(X, Y, Z), Fuse, Modify);
    }
    else if (narg == 14)
    {
      rfdef = Standard_True;
      gp_Pnt Or(X, Y, Z);
      X                = Draw::Atof(a[7]);
      Y                = Draw::Atof(a[8]);
      Z                = Draw::Atof(a[9]);
      Standard_Real H1 = Draw::Atof(a[10]);
      Standard_Real H2 = Draw::Atof(a[11]);
      gp_Ax1        ax1(Or, gp_Dir(X, Y, Z));
      getRevolutionForm().Init(Sbase, W, P, ax1, H1, H2, Fuse, Modify);
      if (!getRevolutionForm().IsDone())
      {
        se = getRevolutionForm().CurrentStatusError();
        // BRepFeat::Print(se,std::cout) << std::endl;
        Standard_SStream aSStream;
        BRepFeat::Print(se, aSStream);
        theCommands << aSStream << "\n";
        return 1;
      }
    }
    else if (narg == 12 && strcasecmp(a[0], "FEATLF"))
    {
      rvdef = Standard_True;
      gp_Pnt Or(X, Y, Z);
      X         = Draw::Atof(a[7]);
      Y         = Draw::Atof(a[8]);
      Z         = Draw::Atof(a[9]);
      theSbase  = Sbase;
      thePbase  = Pbase;
      theSkface = Skface;
      getRevol().Init(Sbase, Pbase, Skface, gp_Ax1(Or, gp_Dir(X, Y, Z)), Fuse, Modify);
    }
    else
    {
      lfdef = Standard_True;
      gp_Vec Direct(X, Y, Z);
      X = Draw::Atof(a[7]);
      Y = Draw::Atof(a[8]);
      Z = Draw::Atof(a[9]);
      getLienarForm().Init(Sbase, W, P, Direct, gp_Vec(X, Y, Z), Fuse, Modify);
      if (!getLienarForm().IsDone())
      {
        se = getLienarForm().CurrentStatusError();
        // BRepFeat::Print(se,std::cout) << std::endl;
        Standard_SStream aSStream;
        BRepFeat::Print(se, aSStream);
        theCommands << aSStream << "\n";
        return 1;
      }
    }
  }
  else if (narg == 7)
  {
    if (!strcasecmp(a[0], "FEATDPRISM"))
    {
      if (Pbase.ShapeType() != TopAbs_FACE)
      {
        theCommands << "Invalid DPrism base";
        return 1;
      }
      Standard_Real Angle = Draw::Atof(a[4]) * M_PI / 360;
      dprdef              = Standard_True;
      theSbase            = Sbase;
      thePbase            = Pbase;
      theSkface           = Skface;
      getDPrism().Init(Sbase, TopoDS::Face(Pbase), Skface, Angle, Fuse, Modify);
    }
    else
    { // FEATPIPE
      TopoDS_Shape aLocalShape(DBRep::Get(a[4], TopAbs_WIRE));
      TopoDS_Wire  Spine = TopoDS::Wire(aLocalShape);
      //      TopoDS_Wire Spine = TopoDS::Wire(DBRep::Get(a[4],TopAbs_WIRE));
      if (Spine.IsNull())
      {
        TopoDS_Shape Edspine = DBRep::Get(a[4], TopAbs_EDGE);
        if (Edspine.IsNull())
        {
          theCommands << "null spine";
          return 1;
        }
        BRep_Builder B;
        B.MakeWire(Spine);
        B.Add(Spine, Edspine);
      }
      pidef     = Standard_True;
      theSbase  = Sbase;
      thePbase  = Pbase;
      theSkface = Skface;
      getPipe().Init(Sbase, Pbase, Skface, Spine, Fuse, Modify);
    }
  }
  return 0;
}

static Standard_Integer ADD(Draw_Interpretor&, Standard_Integer narg, const char** a)
{
  Standard_Integer i;
  if (narg < 4 || narg % 2 != 0)
  {
    return 1;
  }
  if (!strcasecmp("PRISM", a[1]))
  {
    if (!prdef)
    {
      return 1;
    }
    for (i = 2; i < narg; i += 2)
    {
      TopoDS_Shape aLocalShape(DBRep::Get(a[i], TopAbs_EDGE));
      TopoDS_Edge  edg = TopoDS::Edge(aLocalShape);
      //      TopoDS_Edge edg = TopoDS::Edge(DBRep::Get(a[i],TopAbs_EDGE));
      if (edg.IsNull())
      {
        return 1;
      }
      aLocalShape     = DBRep::Get(a[i + 1], TopAbs_FACE);
      TopoDS_Face fac = TopoDS::Face(aLocalShape);
      //      TopoDS_Face fac = TopoDS::Face(DBRep::Get(a[i+1],TopAbs_FACE));
      if (fac.IsNull())
      {
        return 1;
      }
      getPrism().Add(edg, fac);
    }
  }
  else if (!strcasecmp("REVOL", a[1]))
  {
    if (!rvdef)
    {
      return 1;
    }
    for (i = 2; i < narg; i += 2)
    {
      TopoDS_Shape aLocalShape(DBRep::Get(a[i], TopAbs_EDGE));
      TopoDS_Edge  edg = TopoDS::Edge(aLocalShape);
      //      TopoDS_Edge edg = TopoDS::Edge(DBRep::Get(a[i],TopAbs_EDGE));
      if (edg.IsNull())
      {
        return 1;
      }
      aLocalShape     = DBRep::Get(a[i + 1], TopAbs_FACE);
      TopoDS_Face fac = TopoDS::Face(aLocalShape);
      //      TopoDS_Face fac = TopoDS::Face(DBRep::Get(a[i+1],TopAbs_FACE));
      if (fac.IsNull())
      {
        return 1;
      }
      getRevol().Add(edg, fac);
    }
  }
  else if (!strcasecmp("PIPE", a[1]))
  {
    if (!pidef)
    {
      return 1;
    }
    for (i = 2; i < narg; i += 2)
    {
      TopoDS_Shape aLocalShape(DBRep::Get(a[i], TopAbs_EDGE));
      TopoDS_Edge  edg = TopoDS::Edge(aLocalShape);
      //      TopoDS_Edge edg = TopoDS::Edge(DBRep::Get(a[i],TopAbs_EDGE));
      if (edg.IsNull())
      {
        return 1;
      }
      aLocalShape     = DBRep::Get(a[i + 1], TopAbs_FACE);
      TopoDS_Face fac = TopoDS::Face(aLocalShape);
      //      TopoDS_Face fac = TopoDS::Face(DBRep::Get(a[i+1],TopAbs_FACE));
      if (fac.IsNull())
      {
        return 1;
      }
      getPipe().Add(edg, fac);
    }
  }
  else
  {
    return 1;
  }
  return 0;
}

static Standard_Integer PERF(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{
  if (narg < 3)
  {
    return 1;
  }
  if (strcasecmp(a[0], "FEATPERFORM") && strcasecmp(a[0], "FEATPERFORMVAL"))
  {
    return 1;
  }

  TopTools_ListOfShape anArgs;
  Standard_Integer     Kas;
  if (!strcasecmp("PRISM", a[1]))
  {
    Kas = 1;
    if (!prdef)
    {
      theCommands << "prism not defined";
      return 1;
    }
  }
  else if (!strcasecmp("REVOL", a[1]))
  {
    Kas = 2;
    if (!rvdef)
    {
      theCommands << "revol not defined";
      return 1;
    }
  }
  else if (!strcasecmp("PIPE", a[1]))
  {
    Kas = 3;
    if (!pidef)
    {
      theCommands << "pipe not defined";
      return 1;
    }
    if (!strcasecmp(a[0], "FEATPERFORMVAL"))
    {
      theCommands << "invalid command for pipe";
      return 1;
    }
  }
  else if (!strcasecmp("DPRISM", a[1]))
  {
    Kas = 4;
    if (!dprdef)
    {
      theCommands << "dprism not defined";
      return 1;
    }
  }
  else if (!strcasecmp("LF", a[1]))
  {
    Kas = 5;
    if (!lfdef)
    {
      theCommands << "lf not defined";
      return 1;
    }
    if (!strcasecmp(a[0], "FEATPERFORMVAL"))
    {
      theCommands << "invalid command for lf";
      return 1;
    }
  }
  else if (!strcasecmp("RF", a[1]))
  {
    Kas = 6;
    if (!rfdef)
    {
      theCommands << "rf not defined";
      return 1;
    }
    if (!strcasecmp(a[0], "FEATPERFORMVAL"))
    {
      theCommands << "invalid command for rf";
      return 1;
    }
  }
  else
  {
    theCommands << "unknown argument : " << a[1];
    return 1;
  }

  if (!strcasecmp(a[0], "FEATPERFORMVAL"))
  {
    if (narg != 4 && narg != 5)
    {
      theCommands << "invalid number of arguments";
      return 1;
    }
    if (narg == 4)
    {
      Standard_Real Val = Draw::Atof(a[3]);
      if (Kas == 1)
      {
        getPrism().Perform(Val);
      }
      else if (Kas == 2)
      {
        Val *= (M_PI / 180.);
        getRevol().Perform(Val);
      }
      else if (Kas == 4)
      {
        getDPrism().Perform(Val);
      }
      else if (Kas == 5)
      {
        theCommands << "invalid command for lf";
        return 1;
      }
      else if (Kas == 6)
      {
        theCommands << "invalid command for rf";
        return 1;
      }
    }
    else if (narg == 5)
    {
      Standard_Real Val    = Draw::Atof(a[3]);
      TopoDS_Shape  FUntil = DBRep::Get(a[4], TopAbs_SHAPE);
      if (Kas == 1)
      {
        getPrism().PerformUntilHeight(FUntil, Val);
      }
      else if (Kas == 2)
      {
        Val *= (M_PI / 180.);
        getRevol().PerformUntilAngle(FUntil, Val);
      }
      else if (Kas == 4)
      {
        getDPrism().PerformUntilHeight(FUntil, Val);
      }
      else
      {
        theCommands << "invalid command for ribs or slots";
        return 1;
      }
    }
  }
  else if (!strcasecmp(a[0], "FEATPERFORM"))
  {
    if (narg == 3)
    { // Thru all
      switch (Kas)
      {
        case 1:
          getPrism().PerformThruAll();
          break;
        case 2:
          getRevol().PerformThruAll();
          break;
        case 3:
          getPipe().Perform();
          break;
        case 4:
          getDPrism().PerformThruAll();
          break;
        case 5:
          getLienarForm().Perform();
          break;
        case 6:
          getRevolutionForm().Perform();
          break;
        default:

          return 1;
      }
    }
    else if (narg == 4)
    { // Until
      TopoDS_Shape Funtil = DBRep::Get(a[3], TopAbs_SHAPE);
      switch (Kas)
      {
        case 1: {
          if (Funtil.IsNull())
          {
            getPrism().PerformUntilEnd();
          }
          else
          {
            getPrism().Perform(Funtil);
          }
        }
        break;
        case 2: {
          if (!Funtil.IsNull())
          {
            getRevol().Perform(Funtil);
          }
          else
          {
            return 1;
          }
        }
        break;
        case 3: {
          if (!Funtil.IsNull())
          {
            getPipe().Perform(Funtil);
          }
          else
          {
            theCommands << "invalid command for ribs pipe";
            return 1;
          }
        }
        break;
        case 4: {
          if (!Funtil.IsNull())
          {
            getDPrism().Perform(Funtil);
          }
          else
          {
            getDPrism().PerformUntilEnd();
          }
        }
        break;
        case 5: {
          theCommands << "invalid command for lf";
          return 1;
        }
        break;
        case 6: {
          theCommands << "invalid command for rf";
          return 1;
        }
        break;
        default:
          return 1;
      }
    }
    else if (narg == 5)
    {
      TopoDS_Shape Ffrom  = DBRep::Get(a[3], TopAbs_SHAPE);
      TopoDS_Shape Funtil = DBRep::Get(a[4], TopAbs_SHAPE);
      if (Funtil.IsNull())
      {
        return 1;
      }
      switch (Kas)
      {
        case 1: {
          if (Ffrom.IsNull())
          {
            getPrism().PerformFromEnd(Funtil);
          }
          else
          {
            getPrism().Perform(Ffrom, Funtil);
          }
        }
        break;
        case 2: {
          if (Ffrom.IsNull())
          {
            return 1;
          }
          getRevol().Perform(Ffrom, Funtil);
        }
        break;
        case 3: {
          if (Ffrom.IsNull())
          {
            return 1;
          }
          getPipe().Perform(Ffrom, Funtil);
        }
        break;
        case 4: {
          if (Ffrom.IsNull())
          {
            getDPrism().PerformFromEnd(Funtil);
          }
          else
          {
            getDPrism().Perform(Ffrom, Funtil);
          }
        }
        break;

        default:
          return 1;
      }
    }
  }

  BRepFeat_StatusError se;
  switch (Kas)
  {
    case 1:
      if (!getPrism().IsDone())
      {
        se = getPrism().CurrentStatusError();
        // BRepFeat::Print(se,std::cout) << std::endl;
        Standard_SStream aSStream;
        BRepFeat::Print(se, aSStream);
        theCommands << aSStream << "\n";
        return 1;
      }
      DBRep::Set(a[2], getPrism());
      dout.Flush();
      // History
      if (BRepTest_Objects::IsHistoryNeeded())
      {
        anArgs.Clear();
        anArgs.Append(theSbase);
        anArgs.Append(thePbase);
        anArgs.Append(theSkface);
        BRepTest_Objects::SetHistory(anArgs, getPrism());
      }
      return 0;
    case 2:
      if (!getRevol().IsDone())
      {
        se = getRevol().CurrentStatusError();
        // BRepFeat::Print(se,std::cout) << std::endl;
        Standard_SStream aSStream;
        BRepFeat::Print(se, aSStream);
        theCommands << aSStream << "\n";
        return 1;
      }
      // History
      if (BRepTest_Objects::IsHistoryNeeded())
      {
        anArgs.Clear();
        anArgs.Append(theSbase);
        anArgs.Append(thePbase);
        anArgs.Append(theSkface);
        BRepTest_Objects::SetHistory(anArgs, getRevol());
      }
      DBRep::Set(a[2], getRevol());
      dout.Flush();
      return 0;
    case 3:
      if (!getPipe().IsDone())
      {
        se = getPipe().CurrentStatusError();
        // BRepFeat::Print(se,std::cout) << std::endl;
        Standard_SStream aSStream;
        BRepFeat::Print(se, aSStream);
        theCommands << aSStream << "\n";
        return 1;
      }
      // History
      if (BRepTest_Objects::IsHistoryNeeded())
      {
        anArgs.Clear();
        anArgs.Append(theSbase);
        anArgs.Append(thePbase);
        anArgs.Append(theSkface);
        BRepTest_Objects::SetHistory(anArgs, getPipe());
      }
      DBRep::Set(a[2], getPipe());
      dout.Flush();
      return 0;
    case 4:
      if (!getDPrism().IsDone())
      {
        se = getDPrism().CurrentStatusError();
        // BRepFeat::Print(se,std::cout) << std::endl;
        Standard_SStream aSStream;
        BRepFeat::Print(se, aSStream);
        theCommands << aSStream << "\n";
        return 1;
      }
      // History
      if (BRepTest_Objects::IsHistoryNeeded())
      {
        anArgs.Clear();
        anArgs.Append(theSbase);
        anArgs.Append(thePbase);
        anArgs.Append(theSkface);
        BRepTest_Objects::SetHistory(anArgs, getDPrism());
      }
      DBRep::Set(a[2], getDPrism());
      dout.Flush();
      return 0;
    case 5:
      if (!getLienarForm().IsDone())
      {
        se = getLienarForm().CurrentStatusError();
        // BRepFeat::Print(se,std::cout) << std::endl;
        Standard_SStream aSStream;
        BRepFeat::Print(se, aSStream);
        theCommands << aSStream << "\n";
        return 1;
      }
      DBRep::Set(a[2], getLienarForm());
      dout.Flush();
      return 0;
    case 6:
      if (!getRevolutionForm().IsDone())
      {
        se = getRevolutionForm().CurrentStatusError();
        // BRepFeat::Print(se,std::cout) << std::endl;
        Standard_SStream aSStream;
        BRepFeat::Print(se, aSStream);
        theCommands << aSStream << "\n";
        return 1;
      }
      DBRep::Set(a[2], getRevolutionForm());
      dout.Flush();
      return 0;
    default:
      return 1;
  }
}

static Standard_Integer BOSS(Draw_Interpretor& theCommands, Standard_Integer narg, const char** a)
{
  if (strcasecmp(a[0], "ENDEDGES") && strcasecmp(a[0], "FILLET") && strcasecmp(a[0], "BOSSAGE"))
  {
    return 1;
  }

  if ((!strcasecmp(a[0], "ENDEDGES") && narg != 5)
      || (!strcasecmp(a[0], "FILLET") && (narg < 5 || narg % 2 != 1))
      || (!strcasecmp(a[0], "BOSSAGE") && narg != 6))
  {
    theCommands.PrintHelp(a[0]);
    return 1;
  }

  Standard_Integer Kas    = 0;
  Standard_Integer dprsig = 0;
  if (!strcasecmp("ENDEDGES", a[0]))
  {
    Kas    = 1;
    dprsig = Draw::Atoi(a[4]);
  }
  else if (!strcasecmp("FILLET", a[0]))
  {
    Kas = 2;
  }
  else if (!strcasecmp("BOSSAGE", a[0]))
  {
    Kas    = 3;
    dprsig = Draw::Atoi(a[5]);
  }

  TopoDS_Shape theShapeTop;
  TopoDS_Shape theShapeBottom;

  if (Kas == 1 || Kas == 3)
  {
    if (!strcasecmp("DPRISM", a[1]))
    {
      if (!dprdef)
      {
        theCommands << "dprism not defined";
        return 1;
      }
    }
    else
    {
      theCommands << "unknown argument : " << a[1];
      return 1;
    }

    getDPrism().BossEdges(dprsig);

    TopTools_ListOfShape theTopEdges, theLatEdges;
    theTopEdges = getDPrism().TopEdges();
    theLatEdges = getDPrism().LatEdges();

    TopTools_ListIteratorOfListOfShape it;
    BRep_Builder                       B;

    B.MakeCompound(TopoDS::Compound(theShapeTop));
    it.Initialize(theTopEdges);
    for (; it.More(); it.Next())
    {
      TopExp_Explorer exp;
      for (exp.Init(it.Value(), TopAbs_EDGE); exp.More(); exp.Next())
      {
        B.Add(theShapeTop, exp.Current());
      }
    }
    DBRep::Set(a[2], theShapeTop);
    dout.Flush();

    B.MakeCompound(TopoDS::Compound(theShapeBottom));
    it.Initialize(theLatEdges);
    for (; it.More(); it.Next())
    {
      B.Add(theShapeBottom, it.Value());
    }
    DBRep::Set(a[3], theShapeBottom);
    dout.Flush();
    if (Kas == 1)
      return 0;
  }

  if (Kas == 2 || Kas == 3)
  {

    //    Standard_Integer nrad;
    TopoDS_Shape V;
    if (Kas == 2)
    {
      V = DBRep::Get(a[2], TopAbs_SHAPE);
    }
    else if (Kas == 3)
    {
      V = getDPrism();
    }

    if (V.IsNull())
      return 1;
    ChFi3d_FilletShape FSh = ChFi3d_Rational;
    if (Rakk)
      delete Rakk;
    Rakk = new BRepFilletAPI_MakeFillet(V, FSh);
    Rakk->SetParams(ta, tesp, t2d, t3d, t2d, fl);
    Rakk->SetContinuity(blend_cont, tapp_angle);
    Standard_Real    Rad;
    TopoDS_Shape     S;
    TopoDS_Edge      E;
    Standard_Integer nbedge = 0;

    if (Kas == 2)
    {
      for (Standard_Integer ii = 1; ii < (narg - 1) / 2; ii++)
      {
        Rad = Draw::Atof(a[2 * ii + 1]);
        if (Rad == 0.)
          continue;
        S = DBRep::Get(a[(2 * ii + 2)], TopAbs_SHAPE);
        TopExp_Explorer exp;
        for (exp.Init(S, TopAbs_EDGE); exp.More(); exp.Next())
        {
          E = TopoDS::Edge(exp.Current());
          if (!E.IsNull())
          {
            Rakk->Add(Rad, E);
            nbedge++;
          }
        }
      }
    }
    else if (Kas == 3)
    {
      Rad = Draw::Atof(a[3]);
      if (Rad != 0.)
      {
        S = theShapeTop;
        TopExp_Explorer exp;
        for (exp.Init(S, TopAbs_EDGE); exp.More(); exp.Next())
        {
          E = TopoDS::Edge(exp.Current());
          if (!E.IsNull())
          {
            Rakk->Add(Rad, E);
            nbedge++;
          }
        }
      }
      Rad = Draw::Atof(a[4]);
      if (Rad != 0.)
      {
        S = theShapeBottom;
        TopExp_Explorer exp;
        for (exp.Init(S, TopAbs_EDGE); exp.More(); exp.Next())
        {
          E = TopoDS::Edge(exp.Current());
          if (!E.IsNull())
          {
            Rakk->Add(Rad, E);
            nbedge++;
          }
        }
      }
    }

    if (!nbedge)
      return 1;
    Rakk->Build();
    if (!Rakk->IsDone())
      return 1;
    TopoDS_Shape res = Rakk->Shape();

    if (Kas == 2)
    {
      DBRep::Set(a[1], res);
    }
    else if (Kas == 3)
    {
      DBRep::Set(a[2], res);
    }
    dout.Flush();

    // Save history for fillet
    if (BRepTest_Objects::IsHistoryNeeded())
    {
      TopTools_ListOfShape anArg;
      anArg.Append(V);
      BRepTest_Objects::SetHistory(anArg, *Rakk);
    }

    return 0;
  }

  return 1;
}

//=============================================================================
// function : ComputeSimpleOffset
// purpose  : Computes simple offset.
//=============================================================================
static Standard_Integer ComputeSimpleOffset(Draw_Interpretor& theCommands,
                                            Standard_Integer  narg,
                                            const char**      a)
{
  if (narg < 4)
  {
    theCommands << "offsetshapesimple result shape offsetvalue [solid] [tolerance=1e-7]\n";
    return 1;
  }

  // Input data.
  TopoDS_Shape aShape = DBRep::Get(a[2]);
  if (aShape.IsNull())
  {
    theCommands << "Input shape is null";
    return 0;
  }
  const Standard_Real anOffsetValue = Draw::Atof(a[3]);
  if (Abs(anOffsetValue) < gp::Resolution())
  {
    theCommands << "Null offset value";
    return 0;
  }

  Standard_Boolean makeSolid = (narg > 4 && !strcasecmp(a[4], "solid"));
  int              iTolArg   = (makeSolid ? 5 : 4);
  Standard_Real    aTol      = (narg > iTolArg ? Draw::Atof(a[iTolArg]) : Precision::Confusion());

  BRepOffset_MakeSimpleOffset aMaker(aShape, anOffsetValue);
  aMaker.SetTolerance(aTol);
  aMaker.SetBuildSolidFlag(makeSolid);
  aMaker.Perform();

  if (!aMaker.IsDone())
  {
    theCommands << "ERROR:" << aMaker.GetErrorMessage() << "\n";
    return 0;
  }

  DBRep::Set(a[1], aMaker.GetResultShape());

  return 0;
}

//=================================================================================================

void BRepTest::FeatureCommands(Draw_Interpretor& theCommands)
{
  static Standard_Boolean done = Standard_False;
  if (done)
    return;
  done = Standard_True;

  DBRep::BasicCommands(theCommands);

  const char* g = "TOPOLOGY Feature commands";

  theCommands.Add(
    "localope",
    " Performs a local top. operation : localope result shape tool F/C (fuse/cut) face [face...]",
    __FILE__,
    Loc,
    g);

  theCommands.Add(
    "hole",
    " Performs a hole : hole result shape Or.X Or.Y Or.Z Dir.X Dir.Y Dir.Z Radius [Pfrom Pto]",
    __FILE__,
    HOLE1,
    g);

  theCommands.Add(
    "firsthole",
    " Performs the first hole : firsthole result shape Or.X Or.Y Or.Z Dir.X Dir.Y Dir.Z Radius",
    __FILE__,
    HOLE2,
    g);

  theCommands.Add(
    "holend",
    " Performs the hole til end : holend result shape Or.X Or.Y Or.Z Dir.X Dir.Y Dir.Z Radius",
    __FILE__,
    HOLE3,
    g);

  theCommands.Add("blindhole",
                  " Performs the blind hole : blindhole result shape Or.X Or.Y Or.Z Dir.X Dir.Y "
                  "Dir.Z Radius Length",
                  __FILE__,
                  HOLE4,
                  g);

  theCommands.Add("holecontrol",
                  "Sets/Unsets or display controls on holes : holecontrol [0/1]",
                  __FILE__,
                  CONTROL,
                  g);

  theCommands.Add("wprism",
                  "Prisms wires on a face : wprism f[use]/c[ut] result shape [[FaceFrom] "
                  "FaceUntil] VecX VecY VecZ  SkecthFace wire1 [wire2 ....]",
                  __FILE__,
                  PRW,
                  g);

  theCommands.Add("fprism",
                  "Prisms a set of faces of a shape : fprism f[use]/c[ut] result shape [[FaceFrom] "
                  "FaceUntil] VecX VecY VecZ face1 [face2...]",
                  __FILE__,
                  PRF,
                  g);

  theCommands.Add("wrotate",
                  "Rotates wires on a face : wrotate f[use]/c[ut] result shape Angle/[FFrom] "
                  "FUntil OX OY OZ DX DY DZ SkecthFace wire1 [wire2 ....]",
                  __FILE__,
                  ROW,
                  g);

  theCommands.Add("frotate",
                  "Rotates a set of faces of a shape : frotate f[use]/c[ut] result shape "
                  "Angle/[FaceFrom] FaceUntil OX OY OZ DX DY DZ face1 [face2...]",
                  __FILE__,
                  ROF,
                  g);

  theCommands.Add("splitshape",
                  "splitshape result shape [splitedges] [face wire/edge/compound "
                  "[wire/edge/compound ...][face wire/edge/compound [wire/edge/compound...] ...] "
                  "[@ edgeonshape edgeonwire [edgeonshape edgeonwire...]]",
                  __FILE__,
                  SPLS,
                  g);

  theCommands.Add("thickshell",
                  "thickshell r shape offset [jointype [tol] ]",
                  __FILE__,
                  thickshell,
                  g);

  theCommands.Add("mkoffsetshape",
                  "mkoffsetshape r shape offset [Tol] [Intersection(0/1)] [SelfInter(0/1)] "
                  "[JoinType(a/i)] [RemoveInternalEdges(0/1)]",
                  __FILE__,
                  mkoffsetshape,
                  g);

  theCommands.Add("offsetshape",
                  "offsetshape r shape offset [tol] [face ...]",
                  __FILE__,
                  offsetshape,
                  g);

  theCommands.Add("offsetcompshape",
                  "offsetcompshape r shape offset [face ...]",
                  __FILE__,
                  offsetshape,
                  g);

  theCommands.Add("offsetparameter",
                  "offsetparameter Tol Inter(c/p) JoinType(a/i/t) [RemoveInternalEdges(r/k)]",
                  __FILE__,
                  offsetparameter,
                  g);

  theCommands.Add("offsetload",
                  "offsetload shape offset bouchon1 bouchon2 ...",
                  __FILE__,
                  offsetload,
                  g);

  theCommands.Add("offsetonface",
                  "offsetonface face1 offset1 face2 offset2 ...",
                  __FILE__,
                  offsetonface,
                  g);

  theCommands.Add("offsetperform", "offsetperform result", __FILE__, offsetperform, g);

  theCommands.Add("glue",
                  "glue result shapenew shapebase facenew facebase [facenew facebase...] [edgenew "
                  "edgebase [edgenew edgebase...]]",
                  __FILE__,
                  GLU,
                  g);

  theCommands.Add("featprism",
                  "Defines the arguments for a prism : featprism shape element skface  Dirx Diry "
                  "Dirz Fuse(0/1/2) Modify(0/1)",
                  __FILE__,
                  DEFIN,
                  g);

  theCommands.Add("featrevol",
                  "Defines the arguments for a revol : featrevol shape element skface  Ox Oy Oz Dx "
                  "Dy Dz Fuse(0/1/2) Modify(0/1)",
                  __FILE__,
                  DEFIN,
                  g);

  theCommands.Add("featpipe",
                  "Defines the arguments for a pipe : featpipe shape element skface  spine "
                  "Fuse(0/1/2) Modify(0/1)",
                  __FILE__,
                  DEFIN,
                  g);

  theCommands.Add("featdprism",
                  "Defines the arguments for a drafted prism : featdprism shape face skface angle "
                  "Fuse(0/1/2) Modify(0/1)",
                  __FILE__,
                  DEFIN,
                  g);

  theCommands.Add("featlf",
                  "Defines the arguments for a linear rib or slot : featlf shape wire plane DirX "
                  "DirY DirZ DirX DirY DirZ Fuse(0/1/2) Modify(0/1)",
                  __FILE__,
                  DEFIN,
                  g);

  theCommands.Add("featrf",
                  "Defines the arguments for a rib or slot of revolution : featrf shape wire plane "
                  "X Y Z DirX DirY DirZ Size Size Fuse(0/1/2) Modify(0/1)",
                  __FILE__,
                  DEFIN,
                  g);

  theCommands.Add("addslide",
                  " Adds sliding elements : addslide prism/revol/pipe edge face [edge face...]",
                  __FILE__,
                  ADD,
                  g);

  theCommands.Add("featperform",
                  " Performs the prism revol dprism linform or pipe :featperform "
                  "prism/revol/pipe/dprism/lf result [[Ffrom] Funtil]",
                  __FILE__,
                  PERF,
                  g);

  theCommands.Add("featperformval",
                  " Performs the prism revol dprism or linform with a value :featperformval "
                  "prism/revol/dprism/lf result value",
                  __FILE__,
                  PERF,
                  g);

  theCommands.Add("endedges",
                  " Return top and bottom edges of dprism :endedges dprism shapetop shapebottom "
                  "First/LastShape (1/2)",
                  __FILE__,
                  BOSS,
                  g);

  theCommands.Add(
    "fillet",
    " Perform fillet on compounds of edges :fillet result object rad1 comp1 rad2 comp2 ...",
    __FILE__,
    BOSS,
    g);

  theCommands.Add("bossage",
                  " Perform fillet on top and bottom edges of dprism :bossage dprism result radtop "
                  "radbottom First/LastShape (1/2)",
                  __FILE__,
                  BOSS,
                  g);

  theCommands.Add("offsetshapesimple",
                  "offsetshapesimple result shape offsetvalue [solid] [tolerance=1e-7]",
                  __FILE__,
                  ComputeSimpleOffset,
                  g);
}