OCCT

// Created on: 1998-04-08
// Created by: Philippe MANGIN
// Copyright (c) 1998-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.


#include <BRepFill_PipeShell.hxx>
#include <BRepOffsetAPI_MakePipeShell.hxx>
#include <GeomFill_PipeError.hxx>
#include <gp_Ax2.hxx>
#include <gp_Dir.hxx>
#include <Law_Function.hxx>
#include <StdFail_NotDone.hxx>
#include <TopoDS_Shape.hxx>
#include <TopoDS_Vertex.hxx>
#include <TopoDS_Wire.hxx>

//=======================================================================
//function :
//purpose  : 
//=======================================================================
BRepOffsetAPI_MakePipeShell::BRepOffsetAPI_MakePipeShell(const TopoDS_Wire& Spine)
{
  myPipe = new (BRepFill_PipeShell) (Spine);
  SetTolerance();
  SetTransitionMode();
  NotDone();
}

//=======================================================================
//function : SetMode
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::SetMode(const Standard_Boolean IsFrenet) 
{
  myPipe->Set(IsFrenet);
}

//=======================================================================
//function : SetDiscreteMode
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::SetDiscreteMode() 
{
  myPipe->SetDiscrete();
}

//=======================================================================
//function : SetMode
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::SetMode(const gp_Ax2& Axe) 
{
  myPipe->Set(Axe);
}

//=======================================================================
//function : SetMode
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::SetMode(const gp_Dir& BiNormal) 
{
  myPipe->Set(BiNormal);
}

//=======================================================================
//function : SetMode
//purpose  : 
//=======================================================================
 Standard_Boolean BRepOffsetAPI_MakePipeShell::SetMode(const TopoDS_Shape& SpineSupport) 
{
  return myPipe->Set(SpineSupport);
}

//=======================================================================
//function : SetMode
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::SetMode(const TopoDS_Wire& AuxiliarySpine,
                                           const Standard_Boolean CurvilinearEquivalence,
                                           const BRepFill_TypeOfContact KeepContact) 
{
   myPipe->Set(AuxiliarySpine, CurvilinearEquivalence, KeepContact);
}

//=======================================================================
//function :Add
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::Add(const TopoDS_Shape& Profile,
				       const Standard_Boolean WithContact,
				       const Standard_Boolean WithCorrection) 
{
  myPipe->Add(Profile, WithContact, WithCorrection);
}

//=======================================================================
//function : Add
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::Add(const TopoDS_Shape& Profile,
				       const TopoDS_Vertex& Location,
				       const Standard_Boolean WithContact,
				       const Standard_Boolean WithCorrection) 
{
  myPipe->Add(Profile, Location, WithContact, WithCorrection);
}

//=======================================================================
//function : SetLaw
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::SetLaw(const TopoDS_Shape& Profile,
					  const Handle(Law_Function)& L,
					  const Standard_Boolean WithContact,
					  const Standard_Boolean WithCorrection) 
{
  myPipe->SetLaw(Profile, L, WithContact, WithCorrection);
}

//=======================================================================
//function : SetLaw
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::SetLaw(const TopoDS_Shape& Profile,
					  const Handle(Law_Function)& L,
					  const TopoDS_Vertex& Location,
					  const Standard_Boolean WithContact,
					  const Standard_Boolean WithCorrection) 
{
  myPipe->SetLaw(Profile, L, Location, WithContact, WithCorrection);
}

//=======================================================================
//function : Delete
//purpose  : 
//=======================================================================

void BRepOffsetAPI_MakePipeShell::Delete( const TopoDS_Shape& Profile)
{
  myPipe->DeleteProfile(Profile);
}


//=======================================================================
//function : IsReady
//purpose  : 
//=======================================================================
 Standard_Boolean BRepOffsetAPI_MakePipeShell::IsReady() const
{
  return myPipe->IsReady();
}

//=======================================================================
//function : GetStatus
//purpose  : 
//=======================================================================
 BRepBuilderAPI_PipeError BRepOffsetAPI_MakePipeShell::GetStatus() const
{
  GeomFill_PipeError stat;
  stat = myPipe->GetStatus();
  switch (stat) {
  case GeomFill_PipeOk :
    {
      return BRepBuilderAPI_PipeDone;
    }
  case  GeomFill_PlaneNotIntersectGuide :
    {
      return BRepBuilderAPI_PlaneNotIntersectGuide;
    }
  case  GeomFill_ImpossibleContact :
    {
      return BRepBuilderAPI_ImpossibleContact;
    }
    default :
      return BRepBuilderAPI_PipeNotDone;
  }
}

//=======================================================================
//function : SetTolerance
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::SetTolerance(const Standard_Real Tol3d,
					 const Standard_Real BoundTol,
					 const Standard_Real TolAngular)
{
 myPipe->SetTolerance(Tol3d, BoundTol, TolAngular);
}

//=======================================================================
//function : SetMaxDegree
//purpose  : 
//=======================================================================
void BRepOffsetAPI_MakePipeShell::SetMaxDegree(const Standard_Integer NewMaxDegree)
{
  myPipe->SetMaxDegree(NewMaxDegree);
}

//=======================================================================
//function : SetMaxSegments
//purpose  : 
//=======================================================================
void BRepOffsetAPI_MakePipeShell::SetMaxSegments(const Standard_Integer NewMaxSegments)
{
  myPipe->SetMaxSegments(NewMaxSegments);
}

//=======================================================================
//function : SetForceApproxC1
//purpose  : Set the flag that indicates attempt to approximate
//           a C1-continuous surface if a swept surface proved
//           to be C0.
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::SetForceApproxC1(const Standard_Boolean ForceApproxC1)
{
  myPipe->SetForceApproxC1(ForceApproxC1);
}

//=======================================================================
//function : SetTransitionMode
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::SetTransitionMode(const BRepBuilderAPI_TransitionMode Mode)
{
  myPipe->SetTransition( (BRepFill_TransitionStyle)Mode );
}

//=======================================================================
//function :Simulate
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::Simulate(const Standard_Integer N,
				     TopTools_ListOfShape& R) 
{
 myPipe->Simulate(N, R); 
}

//=======================================================================
//function :Build() 
//purpose  : 
//=======================================================================
 void BRepOffsetAPI_MakePipeShell::Build(const Message_ProgressRange& /*theRange*/)
{
  Standard_Boolean Ok;
  Ok = myPipe->Build();
  if (Ok) {
    myShape = myPipe->Shape();
    Done();
  }
  else NotDone(); 
}

//=======================================================================
//function : MakeSolid
//purpose  : 
//=======================================================================
 Standard_Boolean BRepOffsetAPI_MakePipeShell::MakeSolid() 
{
  if (!IsDone()) throw StdFail_NotDone("BRepOffsetAPI_MakePipeShell::MakeSolid");
  Standard_Boolean Ok;
  Ok = myPipe->MakeSolid();
  if (Ok) myShape = myPipe->Shape();
  return Ok;
}

//=======================================================================
//function :FirstShape()
//purpose  : 
//=======================================================================
 TopoDS_Shape BRepOffsetAPI_MakePipeShell::FirstShape() 
{
  return myPipe->FirstShape();
}

//=======================================================================
//function : LastShape()
//purpose  : 
//=======================================================================
 TopoDS_Shape BRepOffsetAPI_MakePipeShell::LastShape() 
{
  return myPipe->LastShape();
}

//=======================================================================
//function : Generated
//purpose  : 
//=======================================================================
const TopTools_ListOfShape& 
BRepOffsetAPI_MakePipeShell::Generated(const TopoDS_Shape& S) 
{
  myPipe->Generated(S, myGenerated);
  return myGenerated;
}

//=======================================================================
//function : ErrorOnSurface
//purpose  : 
//=======================================================================

Standard_Real BRepOffsetAPI_MakePipeShell::ErrorOnSurface() const
{
  return myPipe->ErrorOnSurface();
}