OCCT

// Created on: 1993-07-06
// Created by: Remi LEQUETTE
// Copyright (c) 1993-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#ifndef _BRepLib_MakeEdge_HeaderFile
#define _BRepLib_MakeEdge_HeaderFile

#include <Standard.hxx>
#include <Standard_DefineAlloc.hxx>
#include <Standard_Handle.hxx>

#include <BRepLib_EdgeError.hxx>
#include <TopoDS_Vertex.hxx>
#include <BRepLib_MakeShape.hxx>
class gp_Pnt;
class gp_Lin;
class gp_Circ;
class gp_Elips;
class gp_Hypr;
class gp_Parab;
class Geom_Curve;
class Geom2d_Curve;
class Geom_Surface;
class TopoDS_Edge;

//! Provides methods to build edges.
//!
//! The methods have the following syntax, where
//! TheCurve is one of Lin, Circ, ...
//!
//! Create(C : TheCurve)
//!
//! Makes an edge on the whole curve. Add vertices
//! on finite curves.
//!
//! Create(C : TheCurve; p1,p2 : Real)
//!
//! Make an edge on the curve between parameters p1
//! and p2. if p2 < p1 the edge will be REVERSED. If
//! p1 or p2 is infinite the curve will be open in
//! that direction. Vertices are created for finite
//! values of p1 and p2.
//!
//! Create(C : TheCurve; P1, P2 : Pnt from gp)
//!
//! Make an edge on the curve between the points P1
//! and P2. The points are projected on the curve
//! and the previous method is used. An error is
//! raised if the points are not on the curve.
//!
//! Create(C : TheCurve; V1, V2 : Vertex from TopoDS)
//!
//! Make an edge on the curve between the vertices
//! V1 and V2. Same as the previous but no vertices
//! are created. If a vertex is Null the curve will
//! be open in this direction.
class BRepLib_MakeEdge : public BRepLib_MakeShape
{
public:
  DEFINE_STANDARD_ALLOC

  Standard_EXPORT BRepLib_MakeEdge();

  Standard_EXPORT BRepLib_MakeEdge(const TopoDS_Vertex& V1, const TopoDS_Vertex& V2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Pnt& P1, const gp_Pnt& P2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Lin& L);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Lin& L, const double p1, const double p2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Lin& L, const gp_Pnt& P1, const gp_Pnt& P2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Lin&        L,
                                   const TopoDS_Vertex& V1,
                                   const TopoDS_Vertex& V2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Circ& L);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Circ& L, const double p1, const double p2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Circ& L, const gp_Pnt& P1, const gp_Pnt& P2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Circ&       L,
                                   const TopoDS_Vertex& V1,
                                   const TopoDS_Vertex& V2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Elips& L);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Elips& L, const double p1, const double p2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Elips& L, const gp_Pnt& P1, const gp_Pnt& P2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Elips&      L,
                                   const TopoDS_Vertex& V1,
                                   const TopoDS_Vertex& V2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Hypr& L);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Hypr& L, const double p1, const double p2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Hypr& L, const gp_Pnt& P1, const gp_Pnt& P2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Hypr&       L,
                                   const TopoDS_Vertex& V1,
                                   const TopoDS_Vertex& V2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Parab& L);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Parab& L, const double p1, const double p2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Parab& L, const gp_Pnt& P1, const gp_Pnt& P2);

  Standard_EXPORT BRepLib_MakeEdge(const gp_Parab&      L,
                                   const TopoDS_Vertex& V1,
                                   const TopoDS_Vertex& V2);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom_Curve>& L);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom_Curve>& L,
                                   const double                   p1,
                                   const double                   p2);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom_Curve>& L,
                                   const gp_Pnt&                  P1,
                                   const gp_Pnt&                  P2);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom_Curve>& L,
                                   const TopoDS_Vertex&           V1,
                                   const TopoDS_Vertex&           V2);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom_Curve>& L,
                                   const gp_Pnt&                  P1,
                                   const gp_Pnt&                  P2,
                                   const double                   p1,
                                   const double                   p2);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom_Curve>& L,
                                   const TopoDS_Vertex&           V1,
                                   const TopoDS_Vertex&           V2,
                                   const double                   p1,
                                   const double                   p2);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                   const occ::handle<Geom_Surface>& S);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                   const occ::handle<Geom_Surface>& S,
                                   const double                     p1,
                                   const double                     p2);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                   const occ::handle<Geom_Surface>& S,
                                   const gp_Pnt&                    P1,
                                   const gp_Pnt&                    P2);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                   const occ::handle<Geom_Surface>& S,
                                   const TopoDS_Vertex&             V1,
                                   const TopoDS_Vertex&             V2);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                   const occ::handle<Geom_Surface>& S,
                                   const gp_Pnt&                    P1,
                                   const gp_Pnt&                    P2,
                                   const double                     p1,
                                   const double                     p2);

  Standard_EXPORT BRepLib_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                   const occ::handle<Geom_Surface>& S,
                                   const TopoDS_Vertex&             V1,
                                   const TopoDS_Vertex&             V2,
                                   const double                     p1,
                                   const double                     p2);

  Standard_EXPORT void Init(const occ::handle<Geom_Curve>& C);

  Standard_EXPORT void Init(const occ::handle<Geom_Curve>& C, const double p1, const double p2);

  Standard_EXPORT void Init(const occ::handle<Geom_Curve>& C, const gp_Pnt& P1, const gp_Pnt& P2);

  Standard_EXPORT void Init(const occ::handle<Geom_Curve>& C,
                            const TopoDS_Vertex&           V1,
                            const TopoDS_Vertex&           V2);

  Standard_EXPORT void Init(const occ::handle<Geom_Curve>& C,
                            const gp_Pnt&                  P1,
                            const gp_Pnt&                  P2,
                            const double                   p1,
                            const double                   p2);

  Standard_EXPORT void Init(const occ::handle<Geom_Curve>& C,
                            const TopoDS_Vertex&           V1,
                            const TopoDS_Vertex&           V2,
                            const double                   p1,
                            const double                   p2);

  Standard_EXPORT void Init(const occ::handle<Geom2d_Curve>& C, const occ::handle<Geom_Surface>& S);

  Standard_EXPORT void Init(const occ::handle<Geom2d_Curve>& C,
                            const occ::handle<Geom_Surface>& S,
                            const double                     p1,
                            const double                     p2);

  Standard_EXPORT void Init(const occ::handle<Geom2d_Curve>& C,
                            const occ::handle<Geom_Surface>& S,
                            const gp_Pnt&                    P1,
                            const gp_Pnt&                    P2);

  Standard_EXPORT void Init(const occ::handle<Geom2d_Curve>& C,
                            const occ::handle<Geom_Surface>& S,
                            const TopoDS_Vertex&             V1,
                            const TopoDS_Vertex&             V2);

  Standard_EXPORT void Init(const occ::handle<Geom2d_Curve>& C,
                            const occ::handle<Geom_Surface>& S,
                            const gp_Pnt&                    P1,
                            const gp_Pnt&                    P2,
                            const double                     p1,
                            const double                     p2);

  Standard_EXPORT void Init(const occ::handle<Geom2d_Curve>& C,
                            const occ::handle<Geom_Surface>& S,
                            const TopoDS_Vertex&             V1,
                            const TopoDS_Vertex&             V2,
                            const double                     p1,
                            const double                     p2);

  //! Returns the error description when NotDone.
  Standard_EXPORT BRepLib_EdgeError Error() const;

  Standard_EXPORT const TopoDS_Edge& Edge();
  Standard_EXPORT                    operator TopoDS_Edge();

  //! Returns the first vertex of the edge. May be Null.
  Standard_EXPORT const TopoDS_Vertex& Vertex1() const;

  //! Returns the second vertex of the edge. May be Null.
  Standard_EXPORT const TopoDS_Vertex& Vertex2() const;

private:
  BRepLib_EdgeError myError;
  TopoDS_Vertex     myVertex1;
  TopoDS_Vertex     myVertex2;
};

#endif // _BRepLib_MakeEdge_HeaderFile