OCCT

// Created on: 1993-07-23
// Created by: Remi LEQUETTE
// Copyright (c) 1993-1999 Matra Datavision
// Copyright (c) 1999-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#include <BRepBuilderAPI_MakeEdge.hxx>
#include <Geom2d_Curve.hxx>
#include <Geom_Surface.hxx>
#include <gp_Circ.hxx>
#include <gp_Elips.hxx>
#include <gp_Hypr.hxx>
#include <gp_Parab.hxx>
#include <gp_Pnt.hxx>
#include <TopoDS_Edge.hxx>
#include <TopoDS_Vertex.hxx>

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge() = default;

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const TopoDS_Vertex& V1, const TopoDS_Vertex& V2)
    : myMakeEdge(V1, V2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Pnt& P1, const gp_Pnt& P2)
    : myMakeEdge(P1, P2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Lin& L)
    : myMakeEdge(L)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Lin& L, const double p1, const double p2)
    : myMakeEdge(L, p1, p2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Lin& L,
                                                 const gp_Pnt& P1,
                                                 const gp_Pnt& P2)
    : myMakeEdge(L, P1, P2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Lin&        L,
                                                 const TopoDS_Vertex& V1,
                                                 const TopoDS_Vertex& V2)
    : myMakeEdge(L, V1, V2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Circ& C)
    : myMakeEdge(C)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Circ& C, const double p1, const double p2)
    : myMakeEdge(C, p1, p2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Circ& C,
                                                 const gp_Pnt&  P1,
                                                 const gp_Pnt&  P2)
    : myMakeEdge(C, P1, P2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Circ&       C,
                                                 const TopoDS_Vertex& V1,
                                                 const TopoDS_Vertex& V2)
    : myMakeEdge(C, V1, V2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Elips& E)
    : myMakeEdge(E)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Elips& E,
                                                 const double    p1,
                                                 const double    p2)
    : myMakeEdge(E, p1, p2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Elips& E,
                                                 const gp_Pnt&   P1,
                                                 const gp_Pnt&   P2)
    : myMakeEdge(E, P1, P2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Elips&      E,
                                                 const TopoDS_Vertex& V1,
                                                 const TopoDS_Vertex& V2)
    : myMakeEdge(E, V1, V2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Hypr& H)
    : myMakeEdge(H)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Hypr& H, const double p1, const double p2)
    : myMakeEdge(H, p1, p2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Hypr& H,
                                                 const gp_Pnt&  P1,
                                                 const gp_Pnt&  P2)
    : myMakeEdge(H, P1, P2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Hypr&       H,
                                                 const TopoDS_Vertex& V1,
                                                 const TopoDS_Vertex& V2)
    : myMakeEdge(H, V1, V2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Parab& P)
    : myMakeEdge(P)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Parab& P,
                                                 const double    p1,
                                                 const double    p2)
    : myMakeEdge(P, p1, p2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Parab& P,
                                                 const gp_Pnt&   P1,
                                                 const gp_Pnt&   P2)
    : myMakeEdge(P, P1, P2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const gp_Parab&      P,
                                                 const TopoDS_Vertex& V1,
                                                 const TopoDS_Vertex& V2)
    : myMakeEdge(P, V1, V2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom_Curve>& L)
    : myMakeEdge(L)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom_Curve>& L,
                                                 const double                   p1,
                                                 const double                   p2)
    : myMakeEdge(L, p1, p2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom_Curve>& L,
                                                 const gp_Pnt&                  P1,
                                                 const gp_Pnt&                  P2)
    : myMakeEdge(L, P1, P2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom_Curve>& L,
                                                 const TopoDS_Vertex&           V1,
                                                 const TopoDS_Vertex&           V2)
    : myMakeEdge(L, V1, V2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom_Curve>& L,
                                                 const gp_Pnt&                  P1,
                                                 const gp_Pnt&                  P2,
                                                 const double                   p1,
                                                 const double                   p2)
    : myMakeEdge(L, P1, P2, p1, p2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom_Curve>& L,
                                                 const TopoDS_Vertex&           V1,
                                                 const TopoDS_Vertex&           V2,
                                                 const double                   p1,
                                                 const double                   p2)
    : myMakeEdge(L, V1, V2, p1, p2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                                 const occ::handle<Geom_Surface>& S)
    : myMakeEdge(L, S)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                                 const occ::handle<Geom_Surface>& S,
                                                 const double                     p1,
                                                 const double                     p2)
    : myMakeEdge(L, S, p1, p2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                                 const occ::handle<Geom_Surface>& S,
                                                 const gp_Pnt&                    P1,
                                                 const gp_Pnt&                    P2)
    : myMakeEdge(L, S, P1, P2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                                 const occ::handle<Geom_Surface>& S,
                                                 const TopoDS_Vertex&             V1,
                                                 const TopoDS_Vertex&             V2)
    : myMakeEdge(L, S, V1, V2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                                 const occ::handle<Geom_Surface>& S,
                                                 const gp_Pnt&                    P1,
                                                 const gp_Pnt&                    P2,
                                                 const double                     p1,
                                                 const double                     p2)
    : myMakeEdge(L, S, P1, P2, p1, p2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::BRepBuilderAPI_MakeEdge(const occ::handle<Geom2d_Curve>& L,
                                                 const occ::handle<Geom_Surface>& S,
                                                 const TopoDS_Vertex&             V1,
                                                 const TopoDS_Vertex&             V2,
                                                 const double                     p1,
                                                 const double                     p2)
    : myMakeEdge(L, S, V1, V2, p1, p2)
{
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom_Curve>& C)
{
  myMakeEdge.Init(C);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom_Curve>& C,
                                   const double                   p1,
                                   const double                   p2)
{
  myMakeEdge.Init(C, p1, p2);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom_Curve>& C,
                                   const gp_Pnt&                  P1,
                                   const gp_Pnt&                  P2)
{
  myMakeEdge.Init(C, P1, P2);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom_Curve>& C,
                                   const TopoDS_Vertex&           V1,
                                   const TopoDS_Vertex&           V2)
{
  myMakeEdge.Init(C, V1, V2);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom_Curve>& C,
                                   const gp_Pnt&                  P1,
                                   const gp_Pnt&                  P2,
                                   const double                   p1,
                                   const double                   p2)
{
  myMakeEdge.Init(C, P1, P2, p1, p2);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom_Curve>& CC,
                                   const TopoDS_Vertex&           VV1,
                                   const TopoDS_Vertex&           VV2,
                                   const double                   pp1,
                                   const double                   pp2)
{
  myMakeEdge.Init(CC, VV1, VV2, pp1, pp2);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom2d_Curve>& C,
                                   const occ::handle<Geom_Surface>& S)
{
  myMakeEdge.Init(C, S);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom2d_Curve>& C,
                                   const occ::handle<Geom_Surface>& S,
                                   const double                     p1,
                                   const double                     p2)
{
  myMakeEdge.Init(C, S, p1, p2);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom2d_Curve>& C,
                                   const occ::handle<Geom_Surface>& S,
                                   const gp_Pnt&                    P1,
                                   const gp_Pnt&                    P2)
{
  myMakeEdge.Init(C, S, P1, P2);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom2d_Curve>& C,
                                   const occ::handle<Geom_Surface>& S,
                                   const TopoDS_Vertex&             V1,
                                   const TopoDS_Vertex&             V2)
{
  myMakeEdge.Init(C, S, V1, V2);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom2d_Curve>& C,
                                   const occ::handle<Geom_Surface>& S,
                                   const gp_Pnt&                    P1,
                                   const gp_Pnt&                    P2,
                                   const double                     p1,
                                   const double                     p2)
{
  myMakeEdge.Init(C, S, P1, P2, p1, p2);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

void BRepBuilderAPI_MakeEdge::Init(const occ::handle<Geom2d_Curve>& CC,
                                   const occ::handle<Geom_Surface>& S,
                                   const TopoDS_Vertex&             VV1,
                                   const TopoDS_Vertex&             VV2,
                                   const double                     pp1,
                                   const double                     pp2)
{
  myMakeEdge.Init(CC, S, VV1, VV2, pp1, pp2);
  if (myMakeEdge.IsDone())
  {
    Done();
    myShape = myMakeEdge.Shape();
  }
}

//=================================================================================================

bool BRepBuilderAPI_MakeEdge::IsDone() const
{
  return myMakeEdge.IsDone();
}

//=================================================================================================

BRepBuilderAPI_EdgeError BRepBuilderAPI_MakeEdge::Error() const
{
  switch (myMakeEdge.Error())
  {

    case BRepLib_EdgeDone:
      return BRepBuilderAPI_EdgeDone;

    case BRepLib_PointProjectionFailed:
      return BRepBuilderAPI_PointProjectionFailed;

    case BRepLib_ParameterOutOfRange:
      return BRepBuilderAPI_ParameterOutOfRange;

    case BRepLib_DifferentPointsOnClosedCurve:
      return BRepBuilderAPI_DifferentPointsOnClosedCurve;

    case BRepLib_PointWithInfiniteParameter:
      return BRepBuilderAPI_PointWithInfiniteParameter;

    case BRepLib_DifferentsPointAndParameter:
      return BRepBuilderAPI_DifferentsPointAndParameter;

    case BRepLib_LineThroughIdenticPoints:
      return BRepBuilderAPI_LineThroughIdenticPoints;
  }

  // portage WNT
  return BRepBuilderAPI_EdgeDone;
}

//=================================================================================================

const TopoDS_Edge& BRepBuilderAPI_MakeEdge::Edge()
{
  return myMakeEdge.Edge();
}

//=================================================================================================

const TopoDS_Vertex& BRepBuilderAPI_MakeEdge::Vertex1() const
{
  return myMakeEdge.Vertex1();
}

//=================================================================================================

const TopoDS_Vertex& BRepBuilderAPI_MakeEdge::Vertex2() const
{
  return myMakeEdge.Vertex2();
}

//=================================================================================================

BRepBuilderAPI_MakeEdge::operator TopoDS_Edge()
{
  return Edge();
}