nimble

<!--
SPDX-FileCopyrightText: 2023 Andreas Kahler <mail@andreaskahler.com>

SPDX-License-Identifier: CERN-OHL-S-2.0
-->

# Installing the components in trays

{{BOM}}
![](svg/baseplate_beams_topplate.svg)

For all of your components:

* find the corresponding 3d printed tray
* install the tray on the rack
* mount the device on the tray

Here are the devices and the trays

* [Netgate SG-1100](DeviceParts.yaml#NetgateSG1100){Qty: 1}
* tray_NetgateSG1100.stl ([preview](models/tray_NetgateSG1100.stl){previewpage}, [download](models/tray_NetgateSG1100.stl))
* [UniFi USW-Flex](DeviceParts.yaml#UniFiUSWFlex){Qty: 1}
* tray_UniFiUSWFlex.stl ([preview](models/tray_UniFiUSWFlex.stl){previewpage}, [download](models/tray_UniFiUSWFlex.stl))
* [Intel NUC10i5FNH](DeviceParts.yaml#NUC10i5FNH){Qty: 1}
* tray_NUC10i5FNH.stl ([preview](models/tray_NUC10i5FNH.stl){previewpage}, [download](models/tray_NUC10i5FNH.stl))
* [Raspberry Pi 4](DeviceParts.yaml#RPi4){Qty: 1}
* tray_RPi4.stl ([preview](models/tray_RPi4.stl){previewpage}, [download](models/tray_RPi4.stl))
![](svg/trays.svg)