MultiSensor

esphome:
  name: "sensore_${area}_${stanza}".lower()  # es: sensore_piano4_studio
  friendly_name: "Sensore ${area} ${stanza}"  # es: Sensore Piano4 Studio
  platformio_options:
    board_build.flash_mode: dio

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf

substitutions:
  area: "Piano4"          ## just for example, change at your use
  stanza: "Studio"        ## just for example, change at your use

ota:
  - platform: esphome
    password: ""

ethernet:
  type: W5500
  clk_pin: GPIO43
  mosi_pin: GPIO44
  miso_pin: GPIO42
  cs_pin: GPIO41
  interrupt_pin: GPIO2
  reset_pin: GPIO1
  manual_ip:
    static_ip: 192.168.1.69     ## just for example, change at your use
    gateway: 192.168.1.1
    subnet: 255.255.255.0

web_server:
  port: 80
  version: 3

logger:
  hardware_uart: USB_SERIAL_JTAG

mqtt:
  broker: 192.168.1.42          ## just for example, change at your use
  port: 1883

i2c:
  sda: GPIO08
  scl: GPIO18
  scan: true
  frequency: 400kHz
  id: bus_a

uart:
  tx_pin: GPIO16
  rx_pin: GPIO15
  baud_rate: 256000
  parity: NONE
  stop_bits: 1

ld2410:

binary_sensor:
  - platform: ld2410
    has_target:
      name: Presence
      id: bs_presence
      internal: false
      on_press:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Presence"
            payload: "ON"
      on_release:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Presence"
            payload: "OFF"
    has_moving_target:
      name: Moving Target
      id: bs_moving
      internal: false
      on_press:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Moving_target"
            payload: "ON"
      on_release:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Moving_target"
            payload: "OFF"
    has_still_target:
        name: Still Target
        id: bs_still
        internal: false
        on_press:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Still_target"
              payload: "ON"
        on_release:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Still_target"
              payload: "OFF"
    out_pin_presence_status:
      name: Out Pin Presence Status
      id: bs_out_pin
      internal: false
      on_press:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Out_pin"
            payload: "ON"
      on_release:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Out_pin"
            payload: "OFF"

sensor:
  - platform: bme280_i2c
    temperature:
      name: "BME280 Temperature"
      id: bme280_temp
      internal: true
      oversampling: 16x    
    pressure:
      name: "BME280 Pressure"
      id: bme280_press
      internal: true
    humidity:
      name: "BME280 Humidity"
      id: bme280_hum
      internal: true
    address: 0x76
    i2c_id: bus_a
    update_interval: 30s

  - platform: template
    name: "BME280 Temperatura"
    id: bme280_temp_template
    unit_of_measurement: "°C"
    lambda: |-
      return id(bme280_temp).state;
    update_interval: 30s
    state_topic: "${area}/${stanza}/Ambiente/Temperatura"
  - platform: template
    name: "BME280 Umidità"
    id: bme280_hum_template
    unit_of_measurement: "%"
    lambda: |-
      return id(bme280_hum).state;
    update_interval: 30s
    state_topic: "${area}/${stanza}/Ambiente/Umidita"
  - platform: template
    name: "BME280 Pressione"
    id: bme280_press_template
    unit_of_measurement: "hPa"
    lambda: |-
      return id(bme280_press).state;
    update_interval: 30s
    state_topic: "${area}/${stanza}/Ambiente/Pressione"

  - platform: bh1750
    name: "Luce BH1750"
    id: lux_sens
    internal: true
    address: 0x23
    i2c_id: bus_a
    update_interval: 30s
  - platform: template
    name: "Luce BH1750"
    id: lux_sens_template
    unit_of_measurement: "lx"
    lambda: |-
      return id(lux_sens).state;
    update_interval: 30s
    state_topic: "${area}/${stanza}/Luce/Lux"

  - platform: scd4x
    co2:
      name: "CO2 SCD41"
      id: scd41_co2
      internal: true
    temperature:
      name: "Temperatura SCD41"
      id: scd41_temp
      internal: true
    humidity:
      name: "Umidità SCD41"
      id: scd41_hum
      internal: true
    update_interval: 60s
    i2c_id: bus_a
  - platform: template
    name: "CO2 SCD41"
    id: scd41_co2_template
    unit_of_measurement: "ppm"
    lambda: |-
      return id(scd41_co2).state;
    state_topic: "${area}/${stanza}/Aria/CO2"
  - platform: template
    name: "Temperatura SCD41"
    id: scd41_temp_template
    unit_of_measurement: "°C"
    lambda: |-
      return id(scd41_temp).state;
    state_topic: "${area}/${stanza}/Aria/Temperatura"
  - platform: template
    name: "Umidità SCD41"
    id: scd41_hum_template
    unit_of_measurement: "%"
    lambda: |-
      return id(scd41_hum).state;
    state_topic: "${area}/${stanza}/Aria/Umidita"

  - platform: ld2410
    light:
      name: Light
      id: ld_light
      internal: true
    moving_distance:
      name : Moving Distance
      id: ld_move_dist
      internal: true
    still_distance:
      name: Still Distance
      id: ld_still_dist
      internal: true
    moving_energy:
      name: Move Energy
      id: ld_move_energy
      internal: true
    still_energy:
      name: Still Energy
      id: ld_still_energy
      internal: true
    detection_distance:
      name: Detection Distance
      id: ld_detect_dist
      internal: true
    g0:
      move_energy:
        name: g0 move energy
        id: g0_move_energy
      still_energy:
        name: g0 still energy
        id: g0_still_energy
    g1:
      move_energy:
        name: g1 move energy
        id: g1_move_energy
      still_energy:
        name: g1 still energy
        id: g1_still_energy
    g2:
      move_energy:
        name: g2 move energy
        id: g2_move_energy        
      still_energy:
        name: g2 still energy
        id: g2_still_energy
    g3:
      move_energy:
        name: g3 move energy
        id: g3_move_energy
      still_energy:
        name: g3 still energy
        id: g3_still_energy
    g4:
      move_energy:
        name: g4 move energy
        id: g4_move_energy
      still_energy:
        name: g4 still energy
        id: g4_still_energy
    g5:
      move_energy:
        name: g5 move energy
        id: g5_move_energy
      still_energy:
        name: g5 still energy
        id: g5_still_energy
    g6:
      move_energy:
        name: g6 move energy
        id: g6_move_energy
      still_energy:
        name: g6 still energy
        id: g6_still_energy
    g7:
      move_energy:
        name: g7 move energy
        id: g7_move_energy
      still_energy:
        name: g7 still energy
        id: g7_still_energy
    g8:
      move_energy:
        name: g8 move energy
        id: g8_move_energy
      still_energy:
        name: g8 still energy
        id: g8_still_energy
  - platform: template
    name: "LD2410 Light"
    id: ld_light_template
    unit_of_measurement: "lx"
    lambda: |-
      return id(ld_light).state;
    state_topic: "${area}/${stanza}/Presenza/Light"     
  - platform: template
    name: "Moving Distance"
    id: ld_move_dist_template
    unit_of_measurement: "cm"
    lambda: |-
      return id(ld_move_dist).state;
    state_topic: "${area}/${stanza}/Presenza/Moving distance"       
  - platform: template
    name: "Still Distance"
    id: ld_still_dist_template
    unit_of_measurement: "cm"
    lambda: |-
      return id(ld_still_dist).state;
    state_topic: "${area}/${stanza}/Presenza/Still distance"
  - platform: template
    name: "Move Energy"
    id: ld_move_energy_template
    lambda: |-
      return id(ld_move_energy).state;
    state_topic: "${area}/${stanza}/Presenza/Move energy"
  - platform: template
    name: "Still Energy"
    id: ld_still_energy_template
    lambda: |-
      return id(ld_still_energy).state;
    state_topic: "${area}/${stanza}/Presenza/Still energy"
  - platform: template
    name: "Detection Distance"
    id: ld_detect_dist_template
    unit_of_measurement: "cm"
    lambda: |-
      return id(ld_detect_dist).state;
    state_topic: "${area}/${stanza}/Presenza/Detection distance"
  - platform: template
    name: "G0 Move Energy"
    lambda: |-
      return id(g0_move_energy).state;
    id: g0_move_energy_template
    state_topic: "${area}/${stanza}/Presenza/G0/Move_Energy"
  - platform: template
    name: "G0 Still Energy"
    lambda: |-
      return id(g0_still_energy).state;
    id: g0_still_energy_template
    state_topic: "${area}/${stanza}/Presenza/G0/Still_Energy"
  - platform: template
    name: "G1 Move Energy"
    lambda: |-
      return id(g1_move_energy).state;
    id: g1_move_energy_template
    state_topic: "${area}/${stanza}/Presenza/G1/Move_Energy"
  - platform: template
    name: "G1 Still Energy"
    lambda: |-
      return id(g1_still_energy).state;
    id: g1_still_energy_template
    state_topic: "${area}/${stanza}/Presenza/G1/Still_Energy"
  - platform: template
    name: "G2 Move Energy"
    lambda: |-
      return id(g2_move_energy).state;
    id: g2_move_energy_template
    state_topic: "${area}/${stanza}/Presenza/G2/Move_Energy"
  - platform: template
    name: "G2 Still Energy"
    lambda: |-
      return id(g2_still_energy).state;
    id: g2_still_energy_template
    state_topic: "${area}/${stanza}/Presenza/G2/Still_Energy"
  - platform: template
    name: "G3 Move Energy"
    lambda: |-
      return id(g3_move_energy).state;
    id: g3_move_energy_template
    state_topic: "${area}/${stanza}/Presenza/G3/Move_Energy"
  - platform: template
    name: "G3 Still Energy"
    lambda: |-
      return id(g3_still_energy).state;
    id: g3_still_energy_template
    state_topic: "${area}/${stanza}/Presenza/G3/Still_Energy"
  - platform: template
    name: "G4 Move Energy"
    lambda: |-
      return id(g4_move_energy).state;
    id: g4_move_energy_template
    state_topic: "${area}/${stanza}/Presenza/G4/Move_Energy"
  - platform: template
    name: "G4 Still Energy"
    lambda: |-
      return id(g4_still_energy).state;
    id: g4_still_energy_template
    state_topic: "${area}/${stanza}/Presenza/G4/Still_Energy"
  - platform: template
    name: "G5 Move Energy"
    lambda: |-
      return id(g5_move_energy).state;
    id: g5_move_energy_template
    state_topic: "${area}/${stanza}/Presenza/G5/Move_Energy"
  - platform: template
    name: "G5 Still Energy"
    lambda: |-
      return id(g5_still_energy).state;
    id: g5_still_energy_template
    state_topic: "${area}/${stanza}/Presenza/G5/Still_Energy"
  - platform: template
    name: "G6 Move Energy"
    lambda: |-
      return id(g6_move_energy).state;
    id: g6_move_energy_template
    state_topic: "${area}/${stanza}/Presenza/G6/Move_Energy"
  - platform: template
    name: "G6 Still Energy"
    lambda: |-
      return id(g6_still_energy).state;
    id: g6_still_energy_template
    state_topic: "${area}/${stanza}/Presenza/G6/Still_Energy"
  - platform: template
    name: "G7 Move Energy"
    lambda: |-
      return id(g7_move_energy).state;
    id: g7_move_energy_template
    state_topic: "${area}/${stanza}/Presenza/G7/Move_Energy"
  - platform: template
    name: "G7 Still Energy"
    lambda: |-
      return id(g7_still_energy).state;
    id: g7_still_energy_template
    state_topic: "${area}/${stanza}/Presenza/G7/Still_Energy"
  - platform: template
    name: "G8 Move Energy"
    lambda: |-
      return id(g8_move_energy).state;
    id: g8_move_energy_template
    state_topic: "${area}/${stanza}/Presenza/G8/Move_Energy"
  - platform: template
    name: "G8 Still Energy"
    lambda: |-
      return id(g8_still_energy).state;
    id: g8_still_energy_template
    state_topic: "${area}/${stanza}/Presenza/G8/Still_Energy"

  - platform: internal_temperature
    name: ESP Temperature
    id: esp_temp
    internal: true
    unit_of_measurement: °C
    device_class: TEMPERATURE
    update_interval: 30s
    entity_category: "diagnostic"
  - platform: template
    name: "ESP Temperature"
    id: esp_temp_template
    unit_of_measurement: "°C"
    lambda: |-
      return id(esp_temp).state;
    update_interval: 60s
    state_topic: "${area}/${stanza}/Diagnostica/Esp temperatura"
    
  - platform: uptime
    name: Uptime
    id: sys_uptime
    update_interval: 10s
  - platform: template
    name: "Uptime"
    id: uptime_sensor_template
    unit_of_measurement: "s"
    lambda: |-
      return id(sys_uptime).state;
    update_interval: 10s
    state_topic: "${area}/${stanza}/Diagnostica/Uptime"

switch:
  - platform: ld2410
    engineering_mode:
      name: "LD2410 Engineering Mode"
      id: engineering_mode
      on_turn_on:
        - mqtt.publish:
            topic: "${area}/${stanza}/Diagnostica/Engineering Mode"
            payload: "ON"
      on_turn_off:
        - mqtt.publish:
            topic: "${area}/${stanza}/Diagnostica/Engineering Mode"
            payload: "OFF"
    bluetooth:
      name: "LD2410 Bluetooth"
      id: bluetooth
      on_turn_on:
        - mqtt.publish:
            topic: "${area}/${stanza}/Diagnostica/Bluetooth"
            payload: "ON"
      on_turn_off:
        - mqtt.publish:
            topic: "${area}/${stanza}/Diagnostica/Bluetooth"
            payload: "OFF"

remote_transmitter:
  pin: GPIO4
  carrier_duty_percent: 50%

number:
  - platform: ld2410
    timeout:
      name: Timeout
      id: timeout
      on_value:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Parametri/Timeout"
            payload: !lambda 'return to_string(x);'
    light_threshold:
      name: Light Threshold
      id: light_threshold
      on_value:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Parametri/Light Threshold"
            payload: !lambda 'return to_string(x);'      
    max_move_distance_gate:
      name: Max Move Distance Gate
      id: max_move_distance_gate
      on_value:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Parametri/Max Move Distance"
            payload: !lambda 'return to_string(x);'      
    max_still_distance_gate:
      name: Max Still Distance Gate
      id: max_still_distance_gate
      on_value:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Parametri/Max Still Distance"
            payload: !lambda 'return to_string(x);'      
    g0:
      move_threshold:
        name: g0 move threshold
        id: g0_move_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G0/Move Threshold"
              payload: !lambda 'return to_string(x);'
      still_threshold:
        name: g0 still threshold
        id: g0_still_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G0/Still Threshold"
              payload: !lambda 'return to_string(x);'
    g1:
      move_threshold:
        name: g1 move threshold
        id: g1_move_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G1/Move Threshold"
              payload: !lambda 'return to_string(x);'
      still_threshold:
        name: g1 still threshold
        id: g1_still_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G1/Still Threshold"
              payload: !lambda 'return to_string(x);'
    g2:
      move_threshold:
        name: g2 move threshold
        id: g2_move_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G2/Move Threshold"
              payload: !lambda 'return to_string(x);'
      still_threshold:
        name: g2 still threshold
        id: g2_still_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G2/Still Threshold"
              payload: !lambda 'return to_string(x);'
    g3:
      move_threshold:
        name: g3 move threshold
        id: g3_move_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G3/Move Threshold"
              payload: !lambda 'return to_string(x);'
      still_threshold:
        name: g3 still threshold
        id: g3_still_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G3/Still Threshold"
              payload: !lambda 'return to_string(x);'
    g4:
      move_threshold:
        name: g4 move threshold
        id: g4_move_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G4/Move Threshold"
              payload: !lambda 'return to_string(x);'
      still_threshold:
        name: g4 still threshold
        id: g4_still_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G4/Still Threshold"
              payload: !lambda 'return to_string(x);'
    g5:
      move_threshold:
        name: g5 move threshold
        id: g5_move_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G5/Move Threshold"
              payload: !lambda 'return to_string(x);'
      still_threshold:
        name: g5 still threshold
        id: g5_still_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G5/Still Threshold"
              payload: !lambda 'return to_string(x);'
    g6:
      move_threshold:
        name: g6 move threshold
        id: g6_move_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G6/Move Threshold"
              payload: !lambda 'return to_string(x);'
      still_threshold:
        name: g6 still threshold
        id: g6_still_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G6/Still Threshold"
              payload: !lambda 'return to_string(x);'
    g7:
      move_threshold:
        name: g7 move threshold
        id: g7_move_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G7/Move Threshold"
              payload: !lambda 'return to_string(x);'
      still_threshold:
        name: g7 still threshold
        id: g7_still_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G7/Still Threshold"
              payload: !lambda 'return to_string(x);'
    g8:
      move_threshold:
        name: g8 move threshold
        id: g8_move_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G8/Move Threshold"
              payload: !lambda 'return to_string(x);'
      still_threshold:
        name: g8 still threshold
        id: g8_still_threshold
        on_value:
          - mqtt.publish:
              topic: "${area}/${stanza}/Presenza/Parametri/G8/Still Threshold"
              payload: !lambda 'return to_string(x);'

button:
  - platform: ld2410
    factory_reset:
      name: "LD2410 Factory Reset"
      on_press:
        - mqtt.publish:
            topic: "${area}/${stanza}/Diagnostica/Reset"
            payload: "PRESSED"
    restart:
      name: "LD2410 Reboot"
      on_press:
        - mqtt.publish:
            topic: "${area}/${stanza}/Diagnostica/Reboot"
            payload: "PRESSED"
    query_params:
      name: "LD2410 Query Params"
      on_press:
        - mqtt.publish:
            topic: "${area}/${stanza}/Diagnostica/Query"
            payload: "PRESSED"
  - platform: restart
    icon: mdi:power-cycle
    name: "ESP Reboot"
    on_press:
      - mqtt.publish:
          topic: "${area}/${stanza}/Diagnostica/ESP_Reboot"
          payload: "PRESSED"

  - platform: template
    name: "Accendi TV"
    on_press:
      - remote_transmitter.transmit_nec:
          address: 0x10EF
          command: 0xA25D
          repeat:
            times: 3
            wait_time: 40ms    
      - mqtt.publish:
          topic: "${area}/${stanza}/IR/Accendi_TV"
          payload: "PRESSED"      

select:
  - platform: ld2410
    distance_resolution:
      name: Distance Resolution
      id: distance_resolution
      on_value:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Parametri/Distance Resolution"
            payload: !lambda 'return x;'      
    baud_rate:
      name: Baud Rate
      id: baud_rate
      on_value:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Parametri/Baud Rate"
            payload: !lambda 'return x;'      
    light_function:
      name: Light Function
      id: light_function
      on_value:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Parametri/Light Function"
            payload: !lambda 'return x;'      
    out_pin_level:
      name: Out Pin Level
      id: out_pin_level
      on_value:
        - mqtt.publish:
            topic: "${area}/${stanza}/Presenza/Parametri/Out Pin Level"
            payload: !lambda 'return x;'      

# Text sensors with general information.
text_sensor:
  # Expose ESPHome version as sensor.
  - platform: version
    name: "${area} ${stanza} Versione"
    id: versione_esphome
    on_value:
      then:
        - mqtt.publish:
            topic: "${area}/${stanza}/Diagnostica/Versione"
            payload: !lambda 'return x;'

  # Expose WiFi information as sensors
  - platform: ethernet_info
    ip_address:
      name: "${area} ${stanza} IP"
      id: ip_address
      on_value:
        then:
          - mqtt.publish:
              topic: "${area}/${stanza}/Diagnostica/IP"
              payload: !lambda 'return x;'
    dns_address:
      name: "${area} ${stanza} DNS"
      id: dns_address
      on_value:
        then:
          - mqtt.publish:
              topic: "${area}/${stanza}/Diagnostica/DNS"
              payload: !lambda 'return x;'
    mac_address:
      name: "${area} ${stanza} MAC"
      id: mac_address    
      on_value:
        then:
          - mqtt.publish:
              topic: "${area}/${stanza}/Diagnostica/MAC"
              payload: !lambda 'return x;'