mujoco

// Copyright 2022 DeepMind Technologies Limited
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

// DO NOT EDIT. THIS FILE IS AUTOMATICALLY GENERATED.
// Error: C reference not found
// NOLINTBEGIN

typedef struct mjPreContact_ {     // contact parameters set by narrowphase collision functions
  mjtNum dist;
  mjtNum pos[3];
  mjtNum normal[3];                // contact normal of the collision
  mjtNum tangent[3];               // first tangent direction
} mjPreContact;
typedef struct mjContact_ {        // result of collision detection functions
  // contact parameters set by narrowphase collision function
  mjtNum  dist;                    // distance between nearest points; neg: penetration
  mjtNum  pos[3];                  // position of contact point: midpoint between geoms
  mjtNum  frame[9];                // normal is in [0-2], points from geom[0] to geom[1]

  // contact parameters set by mj_collideGeoms
  mjtNum  includemargin;           // margin for force generation
  mjtNum  friction[5];             // tangent1, 2, spin, roll1, 2
  mjtNum  solref[mjNREF];          // constraint solver reference, normal direction
  mjtNum  solreffriction[mjNREF];  // constraint solver reference, friction directions
  mjtNum  solimp[mjNIMP];          // constraint solver impedance
  mjtNum  adhesion;                // adhesive force along the contact normal

  // internal storage used by solver
  mjtNum  mu;                      // friction of regularized cone, set by mj_makeConstraint
  mjtNum  H[36];                   // cone Hessian, set by mj_constraintUpdate

  // contact descriptors set by mj_collideXXX
  int     dim;                     // contact space dimensionality: 1, 3, 4 or 6
  int     geom1;                   // id of geom 1; deprecated, use geom[0]
  int     geom2;                   // id of geom 2; deprecated, use geom[1]
  int     geom[2];                 // geom ids; -1 for flex
  int     flex[2];                 // flex ids; -1 for geom
  int     elem[2];                 // element ids; -1 for geom or flex vertex
  int     vert[2];                 // vertex ids;  -1 for geom or flex element

  // flag set by mj_setContact or mj_instantiateContact
  int     exclude;                 // 0: include, 1: in gap, 2: fused, 3: no dofs, 4: passive

  // address computed by mj_instantiateContact
  int     efc_address;             // address in efc; -1: not included
} mjContact;
typedef struct mjWarningStat_ {  // warning statistics
  int     lastinfo;              // info from last warning
  int     number;                // how many times was warning raised
} mjWarningStat;
typedef struct mjTimerStat_ {  // timer statistics
  mjtNum  duration;            // cumulative duration
  int     number;              // how many times was timer called
} mjTimerStat;
typedef struct mjSolverStat_ {  // per-iteration solver statistics
  mjtNum  improvement;          // cost reduction, scaled by 1/trace(M(qpos0))
  mjtNum  gradient;             // gradient norm (primal only, scaled)
  mjtNum  lineslope;            // slope in linesearch
  int     nactive;              // number of active constraints
  int     nchange;              // number of constraint state changes
  int     neval;                // number of cost evaluations in line search
  int     nupdate;              // number of Cholesky updates in line search
} mjSolverStat;
typedef struct mjData_ {
  // constant sizes
  mjtSize narena;            // size of the arena in bytes (inclusive of the stack)
  mjtSize nbuffer;           // size of main buffer in bytes
  int     nplugin;           // number of plugin instances

  // stack pointer
  size_t  pstack;            // first available byte in stack (mutable)
  size_t  pbase;             // value of pstack when mj_markStack was last called (mutable)

  // arena pointer
  size_t  parena;            // first available byte in arena

  // threading
  uintptr_t threadpool;      // thread pool pointer
  mjtBool threadlock;        // disable stack freeing during threaded execution

  // memory utilization statistics
  mjtSize maxuse_stack;                       // maximum stack allocation in bytes (mutable)
  mjtSize maxuse_arena;                       // maximum arena allocation in bytes
  int     maxuse_con;                         // maximum number of contacts
  int     maxuse_efc;                         // maximum number of scalar constraints

  // solver statistics
  mjSolverStat  solver[mjNISLAND*mjNSOLVER];  // solver statistics per island, per iteration
  int           solver_niter[mjNISLAND];      // number of solver iterations, per island
  int           solver_nnz[mjNISLAND];        // number of nonzeros in solver matrix, per island
  mjtNum        solver_fwdinv[2];             // forward-inverse comparison: qfrc, efc

  // diagnostics
  mjWarningStat warning[mjNWARNING];          // warning statistics (mutable)
  mjTimerStat   timer[mjNTIMER];              // timer statistics

  // variable sizes
  int     ncon;              // number of detected contacts
  int     ne;                // number of equality constraints
  int     nf;                // number of friction constraints
  int     nl;                // number of limit constraints
  int     nefc;              // number of constraints
  int     nJ;                // number of non-zeros in constraint Jacobian

  // effective metric: per-step activity flag and sizes, set by mjd_effBuild
  int     efm_active;        // implicit effective metric M+K is active (see mjd_effBuild)
  int     nefmK;             // number of non-zeros in effective-stiffness CSR
  int     nefmcon;           // packed length of the contact rank-1 rows
  int     nefmT;             // number of tendons with terms in the metric
  int     nefmA;             // number of actuators with terms in the metric
  int     nefmdof;           // number of 3x3 blocks in the effective-metric preconditioner
  int     nefmL;             // size of the effective-metric block storage (9*nefmdof)

  // variable sizes, continued
  int     nY;                // number of non-zeros in constraint inverse inertia square root
  int     nA;                // number of non-zeros in constraint inverse inertia matrix
  int     nisland;           // number of detected constraint islands
  int     nidof;             // number of dofs in all islands
  int     ntree_awake;       // number of awake trees
  int     nbody_awake;       // number of awake dynamic and static bodies
  int     nparent_awake;     // number of bodies with awake parents
  int     nv_awake;          // number of awake dofs

  // flags marking lazily evaluated stages
  mjtBool flg_energypos;     // has mj_energyPos been called
  mjtBool flg_energyvel;     // has mj_energyVel been called
  mjtBool flg_subtreevel;    // has mj_subtreeVel been called
  mjtBool flg_rnepost;       // has mj_rnePostConstraint been called

  // global properties
  mjtNum  time;              // simulation time
  mjtNum  energy[2];         // potential, kinetic energy

  //-------------------- end of info header

  // buffers
  void*   buffer;            // main buffer; all pointers point in it            (nbuffer bytes)
  void*   arena;             // arena+stack buffer                               (narena bytes)

  //-------------------- main inputs and outputs of the computation

  // state
  mjtNum* qpos;              // position                                         (nq x 1)
  mjtNum* qvel;              // velocity                                         (nv x 1)
  mjtNum* act;               // actuator activation                              (na x 1)
  mjtNum* history;           // history buffer                                   (nhistory x 1)
  mjtNum* qacc_warmstart;    // acceleration used for warmstart                  (nv x 1)
  mjtNum* plugin_state;      // plugin state                                     (npluginstate x 1)

  // control
  mjtNum* ctrl;              // control                                          (nu x 1)
  mjtNum* qfrc_applied;      // applied generalized force                        (nv x 1)
  mjtNum* xfrc_applied;      // applied Cartesian force/torque                   (nbody x 6)
  mjtBool* eq_active;        // enable/disable constraints                       (neq x 1)

  // mocap data
  mjtNum* mocap_pos;         // positions of mocap bodies                        (nmocap x 3)
  mjtNum* mocap_quat;        // orientations of mocap bodies                     (nmocap x 4)

  // dynamics
  mjtNum* qacc;              // acceleration                                     (nv x 1)
  mjtNum* act_dot;           // time-derivative of actuator activation           (na x 1)

  // user data
  mjtNum* userdata;          // user data, not touched by engine                 (nuserdata x 1)

  // sensors
  mjtNum* sensordata;        // sensor data array                                (nsensordata x 1)

  // sleep state
  int*    tree_asleep;       // <0: awake; >=0: index cycle of sleeping trees    (ntree x 1)

  // plugins
  int*       plugin;         // copy of m->plugin, required for deletion         (nplugin x 1)
  uintptr_t* plugin_data;    // pointer to plugin-managed data structure         (nplugin x 1)

  //-------------------- POSITION dependent

  // computed by mj_fwdPosition/mj_kinematics
  mjtNum* xpos;              // Cartesian position of body frame                 (nbody x 3)
  mjtNum* xquat;             // Cartesian orientation of body frame              (nbody x 4)
  mjtNum* xmat;              // Cartesian orientation of body frame              (nbody x 9)
  mjtNum* xipos;             // Cartesian position of body com                   (nbody x 3)
  mjtNum* ximat;             // Cartesian orientation of body inertia            (nbody x 9)
  mjtNum* xanchor;           // Cartesian position of joint anchor               (njnt x 3)
  mjtNum* xaxis;             // Cartesian joint axis                             (njnt x 3)
  mjtNum* geom_xpos;         // Cartesian geom position                          (ngeom x 3)
  mjtNum* geom_xmat;         // Cartesian geom orientation                       (ngeom x 9)
  mjtNum* site_xpos;         // Cartesian site position                          (nsite x 3)
  mjtNum* site_xmat;         // Cartesian site orientation                       (nsite x 9)
  mjtNum* cam_xpos;          // Cartesian camera position                        (ncam x 3)
  mjtNum* cam_xmat;          // Cartesian camera orientation                     (ncam x 9)
  mjtNum* light_xpos;        // Cartesian light position                         (nlight x 3)
  mjtNum* light_xdir;        // Cartesian light direction                        (nlight x 3)

  // computed by mj_fwdPosition/mj_comPos
  mjtNum* subtree_com;       // center of mass of each subtree                   (nbody x 3)
  mjtNum* cdof;              // com-based motion axis of each dof (rot:lin)      (nv x 6)
  mjtNum* cinert;            // com-based body inertia and mass                  (nbody x 10)

  // computed by mj_fwdPosition/mj_flex
  mjtNum* flexvert_xpos;     // Cartesian flex vertex positions                  (nflexvert x 3)
  mjtNum* flexelem_aabb;     // flex element bounding boxes (center, size)       (nflexelem x 6)
  mjtNum* flexelem_krot;     // corotated element stiffness (implicit only)      (nflexstiffness x 1)
  mjtNum* flexedge_J;        // flex edge Jacobian                               (nJfe x 1)
  mjtNum* flexedge_length;   // flex edge lengths                                (nflexedge x 1)
  mjtNum* flexvert_J;        // flex vertex Jacobian                             (nJfv x 2)
  mjtNum* flexvert_length;   // flex vertex lengths                              (nflexvert x 2)
  mjtNum* bvh_aabb_dyn;      // global bounding box (center, size)               (nbvhdynamic x 6)

  // AL contact state carried across steps (flag ipc, not in mjtState)
  mjtNum* flexvert_lambda;   // flex contact multiplier                          (nflexvert x 1)
  int*    flexvert_conage;   // flex contact age: <0 loaded, >0 steps since      (nflexvert x 1)

  // computed by mj_fwdPosition/mj_tendon
  int*    ten_wrapadr;       // start address of tendon's path                   (ntendon x 1)
  int*    ten_wrapnum;       // number of wrap points in path                    (ntendon x 1)
  mjtNum* ten_J;             // tendon Jacobian                                  (nJten x 1)
  mjtNum* ten_length;        // tendon lengths                                   (ntendon x 1)
  int*    wrap_obj;          // geom id; -1: site; -2: pulley                    (nwrap x 2)
  mjtNum* wrap_xpos;         // Cartesian 3D points in all paths                 (nwrap x 6)

  // computed by mj_fwdPosition/mj_transmission
  mjtNum* actuator_length;   // actuator lengths, one per force output           (nout x 1)
  int*    moment_rownnz;     // number of non-zeros in actuator_moment row       (nout x 1)
  int*    moment_rowadr;     // row start address in colind array                (nout x 1)
  int*    moment_colind;     // column indices in sparse Jacobian                (nJmom x 1)
  mjtNum* actuator_moment;   // actuator moments                                 (nJmom x 1)

  // computed by mj_fwdPosition/mj_makeM
  mjtNum* crb;               // com-based composite inertia and mass             (nbody x 10)
  mjtNum* M;                 // inertia (sparse)                                 (nC x 1)

  // computed by mj_fwdPosition/mj_factorM
  mjtNum* qLD;               // L'*D*L factorization of M (sparse)               (nC x 1)
  mjtNum* qLDiagInv;         // 1/diag(D)                                        (nv x 1)

  // computed by mj_collision/mj_collideTree
  mjtBool* bvh_active;       // was bounding volume checked for collision        (nbvh x 1)

  // computed by mj_updateSleep
  int*    tree_awake;        // is tree awake; 0: asleep; 1: awake               (ntree x 1)
  int*    body_awake;        // body sleep state (mjtSleepState)                 (nbody x 1)
  int*    body_awake_ind;    // indices of awake and static bodies               (nbody x 1)
  int*    parent_awake_ind;  // indices of bodies with awake or static parents   (nbody x 1)
  int*    dof_awake_ind;     // indices of awake dofs                            (nv x 1)

  //-------------------- POSITION, VELOCITY dependent

  // computed by mj_fwdVelocity
  mjtNum* flexedge_velocity; // flex edge velocities                             (nflexedge x 1)
  mjtNum* ten_velocity;      // tendon velocities                                (ntendon x 1)
  mjtNum* actuator_velocity; // actuator velocities, one per force output        (nout x 1)

  // computed by mj_fwdVelocity/mj_comVel
  mjtNum* cvel;              // com-based velocity (rot:lin)                     (nbody x 6)
  mjtNum* cdof_dot;          // time-derivative of cdof (rot:lin)                (nv x 6)

  // computed by mj_fwdVelocity/mj_rne (without acceleration)
  mjtNum* qfrc_bias;         // C(qpos,qvel)                                     (nv x 1)

  // computed by mj_fwdVelocity/mj_passive
  mjtNum* qfrc_spring;       // passive spring force                             (nv x 1)
  mjtNum* qfrc_damper;       // passive damper force                             (nv x 1)
  mjtNum* qfrc_gravcomp;     // passive gravity compensation force               (nv x 1)
  mjtNum* qfrc_fluid;        // passive fluid force                              (nv x 1)
  mjtNum* qfrc_adhesion;     // passive contact adhesion force                   (nv x 1)
  mjtNum* qfrc_passive;      // total passive force                              (nv x 1)

  // computed by mj_sensorVel/mj_subtreeVel if needed
  mjtNum* subtree_linvel;    // linear velocity of subtree com                   (nbody x 3)
  mjtNum* subtree_angmom;    // angular momentum about subtree com               (nbody x 3)

  // computed by mj_Euler or mj_implicit
  mjtNum* qH;                // L'*D*L factorization of modified M               (nC x 1)
  mjtNum* qHDiagInv;         // 1/diag(D) of modified M                          (nv x 1)

  // computed by mj_implicit/mj_derivative
  mjtNum* qDeriv;            // d (passive + actuator - bias) / d qvel           (nD x 1)

  // computed by mj_implicit/mju_factorLUSparse
  mjtNum* qLU;               // sparse LU of (M - dt*qDeriv)                     (nD x 1)

  //-------------------- POSITION, VELOCITY, CONTROL/ACCELERATION dependent

  // computed by mj_fwdActuation
  mjtNum* actuator_force;    // actuator force in actuation space                (nout x 1)
  mjtNum* qfrc_actuator;     // actuator force in joint space                    (nv x 1)

  // computed by mj_fwdAcceleration
  mjtNum* qfrc_smooth;       // net unconstrained force                          (nv x 1)
  mjtNum* qacc_smooth;       // unconstrained acceleration                       (nv x 1)

  // computed by mj_fwdConstraint/mj_inverse
  mjtNum* qfrc_constraint;   // constraint force (flag ipc: incl. flex contact)  (nv x 1)

  // computed by mj_inverse
  mjtNum* qfrc_inverse;      // net external force; should equal:
                             // qfrc_applied + J'*xfrc_applied + qfrc_actuator   (nv x 1)

  // computed by mj_sensorAcc/mj_rnePostConstraint if needed; rotation:translation format
  mjtNum* cacc;              // com-based acceleration                           (nbody x 6)
  mjtNum* cfrc_int;          // com-based interaction force with parent          (nbody x 6)
  mjtNum* cfrc_ext;          // com-based external force on body                 (nbody x 6)

  //-------------------- arena-allocated: POSITION dependent

  // computed by mj_collision
  mjContact* contact;        // array of all detected contacts                   (ncon x 1)

  // computed by mj_makeConstraint
  int*    efc_type;          // constraint type (mjtConstraint)                  (nefc x 1)
  int*    efc_id;            // id of object of specified type                   (nefc x 1)
  int*    efc_J_rownnz;      // number of non-zeros in constraint Jacobian row   (nefc x 1)
  int*    efc_J_rowadr;      // row start address in colind array                (nefc x 1)
  int*    efc_J_rowsuper;    // number of subsequent rows in supernode           (nefc x 1)
  int*    efc_J_colind;      // column indices in constraint Jacobian            (nJ x 1)
  mjtNum* efc_J;             // constraint Jacobian                              (nJ x 1)
  mjtNum* efc_pos;           // constraint position (equality, contact)          (nefc x 1)
  mjtNum* efc_margin;        // inclusion margin (contact)                       (nefc x 1)
  mjtNum* efc_frictionloss;  // frictionloss (friction)                          (nefc x 1)
  mjtNum* efc_diagA;         // diagonal of A matrix, approximate or exact       (nefc x 1)
  mjtNum* efc_KBIP;          // stiffness, damping, impedance, imp'              (nefc x 4)
  mjtNum* efc_D;             // constraint mass                                  (nefc x 1)
  mjtNum* efc_R;             // inverse constraint mass                          (nefc x 1)
  int*    tendon_efcadr;     // first efc address involving tendon; -1: none     (ntendon x 1)

  // computed by mj_island (island tree structure)
  int*    tree_island;       // island id of this tree; -1: none                 (ntree x 1)
  int*    island_ntree;      // number of trees in this island                   (nisland x 1)
  int*    island_itreeadr;   // island start address in itree vector             (nisland x 1)
  int*    map_itree2tree;    // map from itree to tree                           (ntree x 1)

  // computed by mj_island (island dof structure)
  int*    dof_island;        // island id of this dof; -1: none                  (nv x 1)
  int*    island_nv;         // number of dofs in this island                    (nisland x 1)
  int*    island_idofadr;    // island start address in idof vector              (nisland x 1)
  int*    island_dofadr;     // island start address in dof vector               (nisland x 1)
  int*    map_dof2idof;      // map from dof to idof                             (nv x 1)
  int*    map_idof2dof;      // map from idof to dof;  >= nidof: unconstrained   (nv x 1)

  // computed by mj_island (dofs sorted by island)
  mjtNum* ifrc_smooth;       // net unconstrained force                          (nidof x 1)
  mjtNum* iacc_smooth;       // unconstrained acceleration                       (nidof x 1)
  mjtNum* iacc;              // acceleration                                     (nidof x 1)

  // computed by mj_island (island constraint structure)
  int*    efc_island;        // island id of this constraint                     (nefc x 1)
  int*    island_ne;         // number of equality constraints in island         (nisland x 1)
  int*    island_nf;         // number of friction constraints in island         (nisland x 1)
  int*    island_nefc;       // number of constraints in island                  (nisland x 1)
  int*    island_iefcadr;    // start address in iefc vector                     (nisland x 1)
  int*    map_efc2iefc;      // map from efc to iefc                             (nefc x 1)
  int*    map_iefc2efc;      // map from iefc to efc                             (nefc x 1)

  // computed by mj_island (constraints sorted by island)
  int*    iefc_type;         // constraint type (mjtConstraint)                  (nefc x 1)
  int*    iefc_id;           // id of object of specified type                   (nefc x 1)
  mjtNum* iefc_frictionloss; // frictionloss (friction)                          (nefc x 1)
  mjtNum* iefc_D;            // constraint mass                                  (nefc x 1)
  mjtNum* iefc_R;            // inverse constraint mass                          (nefc x 1)

  // computed by mj_projectConstraint (PGS solver)
  int*    efc_Y_rownnz;      // number of non-zeros in Y row                     (nefc x 1)
  int*    efc_Y_rowadr;      // row start address in Y colind array              (nefc x 1)
  int*    efc_Y_colind;      // column indices in sparse Y                       (nY x 1)
  mjtNum* efc_Y;             // whitened Jacobian Y = J*M^(-1/2)                 (nY x 1)
  int*    efc_AR_rownnz;     // number of non-zeros in AR                        (nefc x 1)
  int*    efc_AR_rowadr;     // row start address in AR colind array             (nefc x 1)
  int*    efc_AR_colind;     // column indices in sparse AR                      (nA x 1)
  mjtNum* efc_AR;            // J*inv(M)*J' + R                                  (nA x 1)

  //-------------------- arena-allocated: POSITION, VELOCITY dependent

  // computed by mj_fwdVelocity/mj_referenceConstraint
  mjtNum* efc_vel;           // velocity in constraint space: J*qvel             (nefc x 1)
  mjtNum* efc_aref;          // reference pseudo-acceleration                    (nefc x 1)

  // computed when the implicit effective metric M+K is active
  mjtNum* efm_c;             // smooth-force shift h*K*qvel                      (nv x 1)
  mjtNum* efm_diag;          // effective-metric diagonal h*D + h^2*K            (nv x 1)
  mjtNum* efm_ck;            // diagonal stiffness h*k, for the smooth shift     (nv x 1)
  mjtNum* efm_sdiag;         // diagonal additions to M in the backbone          (nv x 1)
  mjtNum* efm_fluid;         // fluid drag blocks in M's sparsity pattern        (nC x 1)
  int*    efm_tid;           // ids of tendons with terms in the metric          (ntendon x 1)
  mjtNum* efm_ts;            // tendon metric scale h^2*k + h*b, tid indexed     (ntendon x 1)
  mjtNum* efm_tk;            // tendon stiffness h*k for shift, tid indexed      (ntendon x 1)
  int*    efm_aid;           // ids of actuators with terms in the metric        (nactuator x 1)
  mjtNum* efm_as;            // actuator metric scale h^2*gp + h*gv, aid indexed (nactuator x 1)
  mjtNum* efm_ak;            // actuator stiffness h*gp, aid indexed             (nactuator x 1)
  mjtNum* efm_ca;            // actuation-stage smooth-force shift               (nv x 1)
  int*    efm_K_rownnz;      // effective-stiffness CSR row nonzeros             (nv x 1)
  int*    efm_K_rowadr;      // effective-stiffness CSR row addresses            (nv x 1)
  int*    efm_K_colind;      // effective-stiffness CSR column indices           (nefmK x 1)
  mjtNum* efm_K_val;         // effective-stiffness CSR values                   (nefmK x 1)
  int*    efm_dofid;         // block k -> dof address of its vertex triple      (nefmdof x 1)
  int*    efm_con_ind;       // contact rows, packed [nnz, conid, colind...]     (nefmcon x 1)
  mjtNum* efm_con_val;       // contact rows, packed [scale, force, val...]      (nefmcon x 1)
  mjtNum* efm_L;             // factored 3x3 diagonal blocks of M+K              (nefmL x 1)

  //-------------------- arena-allocated: POSITION, VELOCITY, CONTROL/ACCELERATION dependent

  // computed by mj_fwdConstraint/mj_inverse
  mjtNum* efc_b;             // linear cost term: J*qacc_smooth - aref           (nefc x 1)
  mjtNum* iefc_aref;         // reference pseudo-acceleration                    (nefc x 1)
  int*    iefc_state;        // constraint state (mjtConstraintState)            (nefc x 1)
  mjtNum* iefc_force;        // constraint force in constraint space             (nefc x 1)
  int*    efc_state;         // constraint state (mjtConstraintState)            (nefc x 1)
  mjtNum* efc_force;         // constraint force in constraint space             (nefc x 1)
  mjtNum* ifrc_constraint;   // constraint force                                 (nidof x 1)

  // compilation signature
  uint64_t  signature;       // also held by the mjSpec that compiled the model
} mjData;
typedef struct mjLROpt_ {         // options for mj_setLengthRange()
  // flags
  int mode;                       // which actuators to process (mjtLRMode)
  int useexisting;                // use existing length range if available
  int uselimit;                   // use joint and tendon limits if available

  // algorithm parameters
  mjtNum accel;                   // target acceleration used to compute force
  mjtNum maxforce;                // maximum force; 0: no limit
  mjtNum timeconst;               // time constant for velocity reduction; min 0.01
  mjtNum timestep;                // simulation timestep; 0: use mjOption.timestep
  mjtNum inttotal;                // total simulation time interval
  mjtNum interval;                // evaluation time interval (at the end)
  mjtNum tolrange;                // convergence tolerance (relative to range)
} mjLROpt;
typedef struct mjCache_ {         // asset cache used by the compiler
  void* impl_;                    // internal pointer to cache
} mjCache;
typedef struct mjVFS_ {           // virtual file system for loading from memory
  void* impl_;                    // internal pointer to VFS memory
} mjVFS;
typedef struct mjOption_ {        // physics options
  // timing parameters
  mjtNum timestep;                // timestep

  // solver parameters
  mjtNum impratio;                // ratio of friction-to-normal contact impedance
  mjtNum tolerance;               // main solver tolerance
  mjtNum ls_tolerance;            // CG/Newton linesearch tolerance
  mjtNum noslip_tolerance;        // noslip solver tolerance
  mjtNum ccd_tolerance;           // convex collision solver tolerance

  // sleep settings
  mjtNum sleep_tolerance;         // sleep velocity tolerance

  // physical constants
  mjtNum gravity[3];              // gravitational acceleration
  mjtNum wind[3];                 // wind (for lift, drag and viscosity)
  mjtNum magnetic[3];             // global magnetic flux
  mjtNum density;                 // density of medium
  mjtNum viscosity;               // viscosity of medium

  // override contact solver parameters (if enabled)
  mjtNum o_margin;                // margin
  mjtNum o_solref[mjNREF];        // solref
  mjtNum o_solimp[mjNIMP];        // solimp
  mjtNum o_friction[5];           // friction

  // discrete settings
  int integrator;                 // integration mode (mjtIntegrator)
  int cone;                       // type of friction cone (mjtCone)
  int jacobian;                   // type of Jacobian (mjtJacobian)
  int solver;                     // solver algorithm (mjtSolver)
  int iterations;                 // maximum number of main solver iterations
  int ls_iterations;              // maximum number of CG/Newton linesearch iterations
  int noslip_iterations;          // maximum number of noslip solver iterations
  int ccd_iterations;             // maximum number of convex collision solver iterations
  int disableflags;               // bit flags for disabling standard features
  int enableflags;                // bit flags for enabling optional features
  int disableactuator;            // bit flags for disabling actuators by group id

  // sdf collision settings
  int sdf_initpoints;             // number of starting points for gradient descent
  int sdf_iterations;             // max number of iterations for gradient descent
} mjOption;
typedef struct mjVisual_ {        // visualization options
  struct {                        // global parameters
    int   cameraid;               // initial camera id (-1: free)
    int   orthographic;           // is the free camera orthographic (0: no, 1: yes)
    float fovy;                   // y field-of-view of free camera (orthographic ? length : degree)
    float ipd;                    // inter-pupilary distance for free camera
    float azimuth;                // initial azimuth of free camera (degrees)
    float elevation;              // initial elevation of free camera (degrees)
    float linewidth;              // line width for wireframe and ray rendering
    float glow;                   // glow coefficient for selected body
    float realtime;               // initial real-time factor (1: real time)
    int   offwidth;               // width of offscreen buffer
    int   offheight;              // height of offscreen buffer
    int   ellipsoidinertia;       // geom for inertia visualization (0: box, 1: ellipsoid)
    int   bvactive;               // visualize active bounding volumes (0: no, 1: yes)
  } global;

  struct {                        // rendering quality
    int   shadowsize;             // size of shadowmap texture
    int   offsamples;             // number of multisamples for offscreen rendering
    int   numslices;              // number of slices for builtin geom drawing
    int   numstacks;              // number of stacks for builtin geom drawing
    int   numquads;               // number of quads for box rendering
  } quality;

  struct {                        // head light
    float ambient[3];             // ambient rgb (alpha=1)
    float diffuse[3];             // diffuse rgb (alpha=1)
    float specular[3];            // specular rgb (alpha=1)
    int   active;                 // is headlight active
  } headlight;

  struct {                        // mapping
    float stiffness;              // mouse perturbation stiffness (space->force)
    float stiffnessrot;           // mouse perturbation stiffness (space->torque)
    float force;                  // from force units to space units
    float torque;                 // from torque units to space units
    float alpha;                  // scale geom alphas when transparency is enabled
    float fogstart;               // OpenGL fog starts at fogstart * mjModel.stat.extent
    float fogend;                 // OpenGL fog ends at fogend * mjModel.stat.extent
    float znear;                  // near clipping plane = znear * mjModel.stat.extent
    float zfar;                   // far clipping plane = zfar * mjModel.stat.extent
    float haze;                   // haze ratio
    float shadowclip;             // directional light: shadowclip * mjModel.stat.extent
    float shadowscale;            // spot light: shadowscale * light.cutoff
    float actuatortendon;         // scale tendon width
  } map;

  struct {                        // scale of decor elements relative to mean body size
    float forcewidth;             // width of force arrow
    float contactwidth;           // contact width
    float contactheight;          // contact height
    float connect;                // autoconnect capsule width
    float com;                    // com radius
    float camera;                 // camera object
    float light;                  // light object
    float selectpoint;            // selection point
    float jointlength;            // joint length
    float jointwidth;             // joint width
    float actuatorlength;         // actuator length
    float actuatorwidth;          // actuator width
    float framelength;            // bodyframe axis length
    float framewidth;             // bodyframe axis width
    float constraint;             // constraint width
    float slidercrank;            // slidercrank width
    float frustum;                // frustum zfar plane
  } scale;

  struct {                        // color of decor elements
    float fog[4];                 // fog
    float haze[4];                // haze
    float force[4];               // external force
    float inertia[4];             // inertia box
    float joint[4];               // joint
    float actuator[4];            // actuator, neutral
    float actuatornegative[4];    // actuator, negative limit
    float actuatorpositive[4];    // actuator, positive limit
    float com[4];                 // center of mass
    float camera[4];              // camera object
    float light[4];               // light object
    float selectpoint[4];         // selection point
    float connect[4];             // auto connect
    float contactpoint[4];        // contact point
    float contactforce[4];        // contact force
    float contactfriction[4];     // contact friction force
    float contacttorque[4];       // contact torque
    float contactgap[4];          // contact point in gap
    float rangefinder[4];         // rangefinder ray
    float constraint[4];          // constraint
    float slidercrank[4];         // slidercrank
    float crankbroken[4];         // used when crank must be stretched/broken
    float frustum[4];             // camera frustum
    float bv[4];                  // bounding volume
    float bvactive[4];            // active bounding volume
  } rgba;
} mjVisual;
typedef struct mjStatistic_ {     // model statistics (in qpos0)
  mjtNum meaninertia;             // mean diagonal inertia
  mjtNum meanmass;                // mean body mass
  mjtNum meansize;                // mean body size
  mjtNum extent;                  // spatial extent
  mjtNum center[3];               // center of model
} mjStatistic;
typedef struct mjModel_ {
  // ------------------------------- sizes

  // sizes needed at mjModel construction
  mjtSize nq;                     // number of generalized coordinates = dim(qpos)
  mjtSize nv;                     // number of degrees of freedom = dim(qvel)
  mjtSize nu;                     // number of scalar controls = dim(ctrl)
  mjtSize nactuator;              // number of actuators
  mjtSize nout;                   // number of force outputs, derived from transmission type
  mjtSize na;                     // number of activation states = dim(act)
  mjtSize nbody;                  // number of bodies
  mjtSize nbvh;                   // number of total bounding volumes in all bodies
  mjtSize nbvhstatic;             // number of static bounding volumes (aabb stored in mjModel)
  mjtSize nbvhdynamic;            // number of dynamic bounding volumes (aabb stored in mjData)
  mjtSize noct;                   // number of total octree cells in all meshes
  mjtSize njnt;                   // number of joints
  mjtSize ntree;                  // number of kinematic trees under world body
  mjtSize nM;                     // number of non-zeros in sparse inertia matrix
  mjtSize nB;                     // number of non-zeros in sparse body-dof matrix
  mjtSize nC;                     // number of non-zeros in sparse reduced dof-dof matrix
  mjtSize nD;                     // number of non-zeros in sparse dof-dof matrix
  mjtSize ngeom;                  // number of geoms
  mjtSize nsite;                  // number of sites
  mjtSize ncam;                   // number of cameras
  mjtSize nlight;                 // number of lights
  mjtSize nflex;                  // number of flexes
  mjtSize nflexnode;              // number of dofs in all flexes
  mjtSize nflexvert;              // number of vertices in all flexes
  mjtSize nflexedge;              // number of edges in all flexes
  mjtSize nflexelem;              // number of elements in all flexes
  mjtSize nflexelemdata;          // number of element vertex ids in all flexes
  mjtSize nflexstiffness;         // number of stiffness parameters in all flexes
  mjtSize nflexbending;           // number of bending parameters in all flexes
  mjtSize nefm0dof;               // number of dofs covered by the constant metric factor
  mjtSize nefm0L;                 // number of non-zeros in the constant metric factor
  mjtSize nflexelemedge;          // number of element edge ids in all flexes
  mjtSize nflexshelldata;         // number of shell fragment vertex ids in all flexes
  mjtSize nflextexcoord;          // number of vertices with texture coordinates
  mjtSize nJfe;                   // number of non-zeros in sparse flexedge Jacobian matrix
  mjtSize nJfv;                   // number of non-zeros in sparse flexvert Jacobian matrix
  mjtSize nmesh;                  // number of meshes
  mjtSize nmeshvert;              // number of vertices in all meshes
  mjtSize nmeshnormal;            // number of normals in all meshes
  mjtSize nmeshtexcoord;          // number of texcoords in all meshes
  mjtSize nmeshface;              // number of triangular faces in all meshes
  mjtSize nmeshgraph;             // number of ints in mesh auxiliary data
  mjtSize nmeshpoly;              // number of polygons in all meshes
  mjtSize nmeshpolyvert;          // number of vertices in all polygons
  mjtSize nmeshpolymap;           // number of polygons in vertex map
  mjtSize nskin;                  // number of skins
  mjtSize nskinvert;              // number of vertices in all skins
  mjtSize nskintexvert;           // number of vertices with texcoords in all skins
  mjtSize nskinface;              // number of triangular faces in all skins
  mjtSize nskinbone;              // number of bones in all skins
  mjtSize nskinbonevert;          // number of vertices in all skin bones
  mjtSize nhfield;                // number of heightfields
  mjtSize nhfielddata;            // number of data points in all heightfields
  mjtSize ntex;                   // number of textures
  mjtSize ntexdata;               // number of bytes in texture rgb data
  mjtSize nmat;                   // number of materials
  mjtSize npair;                  // number of predefined geom pairs
  mjtSize nexclude;               // number of excluded geom pairs
  mjtSize neq;                    // number of equality constraints
  mjtSize ntendon;                // number of tendons
  mjtSize nJten;                  // number of non-zeros in sparse ten_J matrix
  mjtSize nwrap;                  // number of wrap objects in all tendon paths
  mjtSize nsensor;                // number of sensors
  mjtSize nnumeric;               // number of numeric custom fields
  mjtSize nnumericdata;           // number of mjtNums in all numeric fields
  mjtSize ntext;                  // number of text custom fields
  mjtSize ntextdata;              // number of mjtBytes in all text fields
  mjtSize ntuple;                 // number of tuple custom fields
  mjtSize ntupledata;             // number of objects in all tuple fields
  mjtSize nkey;                   // number of keyframes
  mjtSize nmocap;                 // number of mocap bodies
  mjtSize nplugin;                // number of plugin instances
  mjtSize npluginattr;            // number of chars in all plugin config attributes
  mjtSize nuser_body;             // number of mjtNums in body_user
  mjtSize nuser_jnt;              // number of mjtNums in jnt_user
  mjtSize nuser_geom;             // number of mjtNums in geom_user
  mjtSize nuser_site;             // number of mjtNums in site_user
  mjtSize nuser_cam;              // number of mjtNums in cam_user
  mjtSize nuser_tendon;           // number of mjtNums in tendon_user
  mjtSize nuser_actuator;         // number of mjtNums in actuator_user
  mjtSize nuser_sensor;           // number of mjtNums in sensor_user
  mjtSize nnames;                 // number of chars in all names
  mjtSize npaths;                 // number of chars in all paths

  // sizes set after mjModel construction
  mjtSize nnames_map;             // number of slots in the names hash map
  mjtSize nJmom;                  // number of non-zeros in sparse actuator_moment matrix
  mjtSize ngravcomp;              // number of bodies with nonzero gravcomp
  mjtSize nemax;                  // number of potential equality-constraint rows
  mjtSize njmax;                  // number of available rows in constraint Jacobian (legacy)
  mjtSize nconmax;                // number of potential contacts in contact list (legacy)
  mjtSize npolygonmax;            // maximum number of vertices in a mesh polygon
  mjtSize nmeshdegmax;            // maximum number of edges adjacent to a mesh vertex
  mjtSize nuserdata;              // number of mjtNums reserved for the user
  mjtSize nsensordata;            // number of mjtNums in sensor data vector
  mjtSize npluginstate;           // number of mjtNums in plugin state vector
  mjtSize nhistory;               // number of mjtNums in history buffer

  // buffer sizes
  mjtSize narena;                 // number of bytes in the mjData arena (inclusive of stack)
  mjtSize nbuffer;                // number of bytes in buffer

  // ------------------------------- flags

  mjtBool flg_gravcomp;           // whether any body has nonzero gravcomp
  mjtBool flg_surfacevel;         // whether any geom has nonzero surfacevel
  mjtBool flg_adhesion;           // whether any geom or pair has nonzero adhesion

  // ------------------------------- options and statistics

  mjOption opt;                   // physics options
  mjVisual vis;                   // visualization options
  mjStatistic stat;               // model statistics

  // ------------------------------- buffers

  // main buffer
  void*     buffer;               // main buffer; all pointers point in it    (nbuffer)

  // default generalized coordinates
  mjtNum*   qpos0;                // qpos values at default pose              (nq x 1)
  mjtNum*   qpos_spring;          // reference pose for springs               (nq x 1)

  // bodies
  int*      body_parentid;        // id of body's parent                      (nbody x 1)
  int*      body_rootid;          // ancestor that is direct child of world   (nbody x 1)
  int*      body_weldid;          // top dof-less ancestor; mocap: own root   (nbody x 1)
  int*      body_mocapid;         // id of mocap data; -1: none               (nbody x 1)
  int*      body_jntnum;          // number of joints for this body           (nbody x 1)
  int*      body_jntadr;          // start addr of joints; -1: no joints      (nbody x 1)
  int*      body_dofnum;          // number of motion degrees of freedom      (nbody x 1)
  int*      body_dofadr;          // start addr of dofs; -1: no dofs          (nbody x 1)
  int*      body_treeid;          // id of body's kinematic tree; -1: static  (nbody x 1)
  int*      body_geomnum;         // number of geoms                          (nbody x 1)
  int*      body_geomadr;         // start addr of geoms; -1: no geoms        (nbody x 1)
  mjtByte*  body_simple;          // 1: diag M; 2: diag M, sliders only       (nbody x 1)
  mjtByte*  body_sameframe;       // same frame as inertia (mjtSameframe)     (nbody x 1)
  mjtNum*   body_pos;             // position offset rel. to parent body      (nbody x 3)
  mjtNum*   body_quat;            // orientation offset rel. to parent body   (nbody x 4)
  mjtNum*   body_ipos;            // local position of center of mass         (nbody x 3)
  mjtNum*   body_iquat;           // local orientation of inertia ellipsoid   (nbody x 4)
  mjtNum*   body_mass;            // mass                                     (nbody x 1)
  mjtNum*   body_subtreemass;     // mass of subtree starting at this body    (nbody x 1)
  mjtNum*   body_inertia;         // diagonal inertia in ipos/iquat frame     (nbody x 3)
  mjtNum*   body_invweight0;      // mean inv inert in qpos0 (trn, rot)       (nbody x 2)
  mjtNum*   body_gravcomp;        // antigravity force, units of body weight  (nbody x 1)
  mjtNum*   body_margin;          // MAX over all geom margins+gaps           (nbody x 1)
  mjtNum*   body_user;            // user data                                (nbody x nuser_body)
  int*      body_plugin;          // plugin instance id; -1: not in use       (nbody x 1)
  int*      body_contype;         // OR over all geom contypes                (nbody x 1)
  int*      body_conaffinity;     // OR over all geom conaffinities           (nbody x 1)
  int*      body_bvhadr;          // address of bvh root                      (nbody x 1)
  int*      body_bvhnum;          // number of bounding volumes               (nbody x 1)

  // bounding volume hierarchy
  int*      bvh_depth;            // depth in the bounding volume hierarchy   (nbvh x 1)
  int*      bvh_child;            // left and right children in tree          (nbvh x 2)
  int*      bvh_nodeid;           // geom or elem id of node; -1: non-leaf    (nbvh x 1)
  mjtNum*   bvh_aabb;             // local bounding box (center, size)        (nbvhstatic x 6)

  // octree spatial partitioning
  int*      oct_depth;            // depth in the octree                      (noct x 1)
  int*      oct_child;            // children of octree node                  (noct x 8)
  mjtNum*   oct_aabb;             // octree node bounding box (center, size)  (noct x 6)
  mjtNum*   oct_coeff;            // octree interpolation coefficients        (noct x 8)

  // joints
  int*      jnt_type;             // type of joint (mjtJoint)                 (njnt x 1)
  int*      jnt_qposadr;          // start addr in 'qpos' for joint's data    (njnt x 1)
  int*      jnt_dofadr;           // start addr in 'qvel' for joint's data    (njnt x 1)
  int*      jnt_bodyid;           // id of joint's body                       (njnt x 1)
  int*      jnt_actuatorid;       // actuator contributing damping / armature (njnt x 1)
  int*      jnt_group;            // group for visibility                     (njnt x 1)
  mjtBool*  jnt_limited;          // does joint have limits                   (njnt x 1)
  mjtBool*  jnt_actfrclimited;    // does joint have actuator force limits    (njnt x 1)
  mjtBool*  jnt_actgravcomp;      // is gravcomp force applied via actuators  (njnt x 1)
  mjtNum*   jnt_solref;           // constraint solver reference: limit       (njnt x mjNREF)
  mjtNum*   jnt_solimp;           // constraint solver impedance: limit       (njnt x mjNIMP)
  mjtNum*   jnt_pos;              // local anchor position                    (njnt x 3)
  mjtNum*   jnt_axis;             // local joint axis                         (njnt x 3)
  mjtNum*   jnt_stiffness;        // linear stiffness coefficient             (njnt x 1)
  mjtNum*   jnt_stiffnesspoly;    // high-order stiffness coefficients        (njnt x mjNPOLY)
  mjtNum*   jnt_range;            // joint limits                             (njnt x 2)
  mjtNum*   jnt_actfrcrange;      // range of total actuator force            (njnt x 2)
  mjtNum*   jnt_margin;           // min distance for limit detection         (njnt x 1)
  mjtNum*   jnt_user;             // user data                                (njnt x nuser_jnt)

  // dofs
  int*      dof_bodyid;           // id of dof's body                         (nv x 1)
  int*      dof_jntid;            // id of dof's joint                        (nv x 1)
  int*      dof_parentid;         // id of dof's parent; -1: none             (nv x 1)
  int*      dof_treeid;           // id of dof's kinematic tree               (nv x 1)
  int*      dof_Madr;             // dof address in M-diagonal                (nv x 1)
  int*      dof_simplenum;        // number of consecutive simple dofs        (nv x 1)
  mjtNum*   dof_solref;           // constraint solver reference:frictionloss (nv x mjNREF)
  mjtNum*   dof_solimp;           // constraint solver impedance:frictionloss (nv x mjNIMP)
  mjtNum*   dof_frictionloss;     // dof friction loss                        (nv x 1)
  mjtNum*   dof_armature;         // dof armature inertia/mass                (nv x 1)
  mjtNum*   dof_damping;          // linear damping coefficient               (nv x 1)
  mjtNum*   dof_dampingpoly;      // high-order damping coefficients          (nv x mjNPOLY)
  mjtNum*   dof_invweight0;       // diag. inverse inertia in qpos0           (nv x 1)
  mjtNum*   dof_M0;               // diag. inertia in qpos0                   (nv x 1)
  mjtNum*   dof_length;           // linear: 1; angular: approx. length scale (nv x 1)

  // trees
  int*      tree_bodyadr;         // start addr of bodies                     (ntree x 1)
  int*      tree_bodynum;         // number of bodies in tree                 (ntree x 1)
  int*      tree_dofadr;          // start addr of dofs                       (ntree x 1)
  int*      tree_dofnum;          // number of dofs in tree                   (ntree x 1)
  int*      tree_sleep_policy;    // sleep policy (mjtSleepPolicy)            (ntree x 1)

  // geoms
  int*      geom_type;            // geometric type (mjtGeom)                 (ngeom x 1)
  int*      geom_contype;         // geom contact type                        (ngeom x 1)
  int*      geom_conaffinity;     // geom contact affinity                    (ngeom x 1)
  int*      geom_condim;          // contact dimensionality (1, 3, 4, 6)      (ngeom x 1)
  int*      geom_bodyid;          // id of geom's body                        (ngeom x 1)
  int*      geom_dataid;          // id of geom's mesh/hfield; -1: none       (ngeom x 1)
  int*      geom_matid;           // material id for rendering; -1: none      (ngeom x 1)
  int*      geom_group;           // group for visibility                     (ngeom x 1)
  int*      geom_priority;        // geom contact priority                    (ngeom x 1)
  int*      geom_plugin;          // plugin instance id; -1: not in use       (ngeom x 1)
  mjtByte*  geom_sameframe;       // same frame as body (mjtSameframe)        (ngeom x 1)
  mjtNum*   geom_solmix;          // mixing coef for solref/imp in geom pair  (ngeom x 1)
  mjtNum*   geom_solref;          // constraint solver reference: contact     (ngeom x mjNREF)
  mjtNum*   geom_solimp;          // constraint solver impedance: contact     (ngeom x mjNIMP)
  mjtNum*   geom_size;            // geom-specific size parameters            (ngeom x 3)
  mjtNum*   geom_aabb;            // bounding box, (center, size)             (ngeom x 6)
  mjtNum*   geom_rbound;          // radius of bounding sphere                (ngeom x 1)
  mjtNum*   geom_pos;             // local position offset rel. to body       (ngeom x 3)
  mjtNum*   geom_quat;            // local orientation offset rel. to body    (ngeom x 4)
  mjtNum*   geom_friction;        // friction for (slide, spin, roll)         (ngeom x 3)
  mjtNum*   geom_margin;          // geometric inflation for contact          (ngeom x 1)
  mjtNum*   geom_gap;             // additional contact detection buffer      (ngeom x 1)
  mjtNum*   geom_surfacevel;      // surface velocity in local frame: lin,ang (ngeom x 6)
  mjtNum*   geom_adhesion;        // adhesive force of contacts               (ngeom x 1)
  mjtNum*   geom_fluid;           // fluid interaction parameters             (ngeom x mjNFLUID)
  mjtNum*   geom_user;            // user data                                (ngeom x nuser_geom)
  float*    geom_rgba;            // rgba when material is omitted            (ngeom x 4)

  // sites
  int*      site_type;            // geom type for rendering (mjtGeom)        (nsite x 1)
  int*      site_bodyid;          // id of site's body                        (nsite x 1)
  int*      site_dataid;          // id of site's mesh; -1: none              (nsite x 1)
  int*      site_matid;           // material id for rendering; -1: none      (nsite x 1)
  int*      site_group;           // group for visibility                     (nsite x 1)
  mjtByte*  site_sameframe;       // same frame as body (mjtSameframe)        (nsite x 1)
  mjtNum*   site_size;            // geom size for rendering                  (nsite x 3)
  mjtNum*   site_pos;             // local position offset rel. to body       (nsite x 3)
  mjtNum*   site_quat;            // local orientation offset rel. to body    (nsite x 4)
  mjtNum*   site_user;            // user data                                (nsite x nuser_site)
  float*    site_rgba;            // rgba when material is omitted            (nsite x 4)

  // cameras
  int*      cam_mode;             // camera tracking mode (mjtCamLight)       (ncam x 1)
  int*      cam_bodyid;           // id of camera's body                      (ncam x 1)
  int*      cam_targetbodyid;     // id of targeted body; -1: none            (ncam x 1)
  mjtNum*   cam_pos;              // position rel. to body frame              (ncam x 3)
  mjtNum*   cam_quat;             // orientation rel. to body frame           (ncam x 4)
  mjtNum*   cam_poscom0;          // global position rel. to sub-com in qpos0 (ncam x 3)
  mjtNum*   cam_pos0;             // global position rel. to body in qpos0    (ncam x 3)
  mjtNum*   cam_mat0;             // global orientation in qpos0              (ncam x 9)
  int*      cam_projection;       // projection type (mjtProjection)          (ncam x 1)
  mjtNum*   cam_fovy;             // y field-of-view (ortho ? len : deg)      (ncam x 1)
  mjtNum*   cam_ipd;              // inter-pupilary distance                  (ncam x 1)
  int*      cam_resolution;       // resolution: pixels [width, height]       (ncam x 2)
  int*      cam_output;           // output types (mjtCamOut bit flags)       (ncam x 1)
  float*    cam_sensorsize;       // sensor size: length [width, height]      (ncam x 2)
  float*    cam_intrinsic;        // [focal length; principal point]          (ncam x 4)
  mjtNum*   cam_user;             // user data                                (ncam x nuser_cam)

  // lights
  int*      light_mode;           // light tracking mode (mjtCamLight)        (nlight x 1)
  int*      light_bodyid;         // id of light's body                       (nlight x 1)
  int*      light_targetbodyid;   // id of targeted body; -1: none            (nlight x 1)
  int*      light_type;           // spot, directional, etc. (mjtLightType)   (nlight x 1)
  int*      light_texid;          // texture id for image lights              (nlight x 1)
  mjtBool*  light_castshadow;     // does light cast shadows                  (nlight x 1)
  float*    light_bulbradius;     // light radius for soft shadows            (nlight x 1)
  float*    light_intensity;      // intensity, in candela                    (nlight x 1)
  float*    light_range;          // range of effectiveness                   (nlight x 1)
  mjtBool*  light_active;         // is light on                              (nlight x 1)
  mjtNum*   light_pos;            // position rel. to body frame              (nlight x 3)
  mjtNum*   light_dir;            // direction rel. to body frame             (nlight x 3)
  mjtNum*   light_poscom0;        // global position rel. to sub-com in qpos0 (nlight x 3)
  mjtNum*   light_pos0;           // global position rel. to body in qpos0    (nlight x 3)
  mjtNum*   light_dir0;           // global direction in qpos0                (nlight x 3)
  float*    light_attenuation;    // OpenGL attenuation (quadratic model)     (nlight x 3)
  float*    light_cutoff;         // OpenGL cutoff                            (nlight x 1)
  float*    light_softness;       // spotlight edge softness                  (nlight x 1)
  float*    light_exponent;       // OpenGL exponent                          (nlight x 1)
  float*    light_ambient;        // ambient rgb (alpha=1)                    (nlight x 3)
  float*    light_diffuse;        // diffuse rgb (alpha=1)                    (nlight x 3)
  float*    light_specular;       // specular rgb (alpha=1)                   (nlight x 3)

  // flexes: contact properties
  int*      flex_contype;         // flex contact type                        (nflex x 1)
  int*      flex_conaffinity;     // flex contact affinity                    (nflex x 1)
  int*      flex_condim;          // contact dimensionality (1, 3, 4, 6)      (nflex x 1)
  int*      flex_priority;        // flex contact priority                    (nflex x 1)
  mjtNum*   flex_solmix;          // mix coef for solref/imp in contact pair  (nflex x 1)
  mjtNum*   flex_solref;          // constraint solver reference: contact     (nflex x mjNREF)
  mjtNum*   flex_solimp;          // constraint solver impedance: contact     (nflex x mjNIMP)
  mjtNum*   flex_friction;        // friction for (slide, spin, roll)         (nflex x 3)
  mjtNum*   flex_margin;          // geometric inflation for contact          (nflex x 1)
  mjtNum*   flex_gap;             // additional contact detection buffer      (nflex x 1)
  int*      flex_selfcollide;     // self collision mode (mjtFlexSelf)        (nflex x 1)
  int*      flex_activelayers;    // number of active element layers, 3D only (nflex x 1)
  int*      flex_passive;         // passive collisions enabled               (nflex x 1)

  // flexes: other properties
  int*      flex_dim;             // 1: lines, 2: triangles, 3: tetrahedra    (nflex x 1)
  int*      flex_matid;           // material id for rendering                (nflex x 1)
  int*      flex_group;           // group for visibility                     (nflex x 1)
  int*      flex_interp;          // interpolation (0: vertex, 1: nodes)      (nflex x 1)
  int*      flex_cellnum;         // finite cell num per dimension            (nflex x 3)
  int*      flex_nodeadr;         // first node address                       (nflex x 1)
  int*      flex_nodenum;         // number of nodes                          (nflex x 1)
  int*      flex_vertadr;         // first vertex address                     (nflex x 1)
  int*      flex_vertnum;         // number of vertices                       (nflex x 1)
  int*      flex_edgeadr;         // first edge address                       (nflex x 1)
  int*      flex_edgenum;         // number of edges                          (nflex x 1)
  int*      flex_elemadr;         // first element address                    (nflex x 1)
  int*      flex_elemnum;         // number of elements                       (nflex x 1)
  int*      flex_elemdataadr;     // first element vertex id address          (nflex x 1)
  int*      flex_stiffnessadr;    // stiffness matrix address                 (nflex x 1)
  int*      flex_elemedgeadr;     // first element edge id address            (nflex x 1)
  int*      flex_bendingadr;      // first bending data address               (nflex x 1)
  int*      flex_shellnum;        // number of shells                         (nflex x 1)
  int*      flex_shelldataadr;    // first shell data address                 (nflex x 1)
  int*      flex_texcoordadr;     // address in flex_texcoord; -1: none       (nflex x 1)
  int*      flex_nodebodyid;      // node body ids                            (nflexnode x 1)
  int*      flex_vertbodyid;      // vertex body ids                          (nflexvert x 1)
  int*      flex_vertedgeadr;     // first edge address                       (nflexvert x 1)
  int*      flex_vertedgenum;     // number of edges                          (nflexvert x 1)
  int*      flex_vertedge;        // edge indices                             (nflexedge x 2)
  int*      flex_edge;            // edge vertex ids (2 per edge)             (nflexedge x 2)
  int*      flex_edgeflap;        // adjacent vertex ids (dim=2 only)         (nflexedge x 2)
  int*      flex_elem;            // element vertex ids (dim+1 per elem)      (nflexelemdata x 1)
  int*      flex_elemtexcoord;    // element texture coordinates (dim+1)      (nflexelemdata x 1)
  int*      flex_elemedge;        // element edge ids                         (nflexelemedge x 1)
  int*      flex_elemlayer;       // element distance from surface, 3D only   (nflexelem x 1)
  int*      flex_shell;           // shell fragment vertex ids (dim per frag) (nflexshelldata x 1)
  mjtNum*   flex_vert;            // vertex positions in local body frames    (nflexvert x 3)
  mjtNum*   flex_vert0;           // vertex positions in qpos0 on [0, 1]^d    (nflexvert x 3)
  mjtNum*   flex_vertmetric;      // inverse of reference shape matrix        (nflexvert x 4)
  mjtNum*   flex_node;            // node positions in local body frames      (nflexnode x 3)
  mjtNum*   flex_node0;           // Cartesian node positions in qpos0        (nflexnode x 3)
  mjtNum*   flexedge_length0;     // edge lengths in qpos0                    (nflexedge x 1)
  mjtNum*   flexedge_invweight0;  // edge inv. weight in qpos0                (nflexedge x 1)
  mjtNum*   flex_radius;          // radius around primitive element          (nflex x 1)
  mjtNum*   flex_size;            // vertex bounding box half sizes in qpos0  (nflex x 3)
  mjtNum*   flex_stiffness;       // finite element stiffness matrix          (nflexstiffness x 1)
  mjtNum*   flex_bending;         // bending stiffness                        (nflexbending x 1)
  int*      efm0_dofid;           // constant metric factor row->dof address  (nefm0dof x 1)
  int*      efm0_L_rownnz;        // constant metric factor row nonzeros      (nefm0dof x 1)
  int*      efm0_L_rowadr;        // constant metric factor row addresses     (nefm0dof x 1)
  int*      efm0_L_colind;        // constant metric factor column indices    (nefm0L x 1)
  mjtNum*   efm0_L;               // factor of M + (dt^2+dt*d)*K_bend         (nefm0L x 1)
  mjtNum*   flex_damping;         // Rayleigh's damping coefficient           (nflex x 1)
  mjtNum*   flex_edgestiffness;   // edge stiffness                           (nflex x 1)
  mjtNum*   flex_edgedamping;     // edge damping                             (nflex x 1)
  int*      flex_edgeequality;    // 0:none, 1:edges, 2:vertices, 3:strain    (nflex x 1)
  mjtBool*  flex_rigid;           // are all vertices in the same body        (nflex x 1)
  mjtBool*  flexedge_rigid;       // are both edge vertices in same body      (nflexedge x 1)
  mjtBool*  flex_centered;        // are all vertex coordinates (0,0,0)       (nflex x 1)
  mjtBool*  flex_flatskin;        // render flex skin with flat shading       (nflex x 1)
  int*      flex_bvhadr;          // address of bvh root; -1: no bvh          (nflex x 1)
  int*      flex_bvhnum;          // number of bounding volumes               (nflex x 1)
  int*      flexedge_J_rownnz;    // number of non-zeros in Jacobian row      (nflexedge x 1)
  int*      flexedge_J_rowadr;    // row start address in colind array        (nflexedge x 1)
  int*      flexedge_J_colind;    // column indices in sparse Jacobian        (nJfe x 1)
  int*      flexvert_J_rownnz;    // number of non-zeros in Jacobian row      (nflexvert x 2)
  int*      flexvert_J_rowadr;    // row start address in colind array        (nflexvert x 2)
  int*      flexvert_J_colind;    // column indices in sparse Jacobian        (nJfv x 2)
  float*    flex_rgba;            // rgba when material is omitted            (nflex x 4)
  float*    flex_texcoord;        // vertex texture coordinates               (nflextexcoord x 2)

  // meshes
  int*      mesh_vertadr;         // first vertex address                     (nmesh x 1)
  int*      mesh_vertnum;         // number of vertices                       (nmesh x 1)
  int*      mesh_faceadr;         // first face address                       (nmesh x 1)
  int*      mesh_facenum;         // number of faces                          (nmesh x 1)
  int*      mesh_bvhadr;          // address of bvh root                      (nmesh x 1)
  int*      mesh_bvhnum;          // number of bvh                            (nmesh x 1)
  int*      mesh_octadr;          // address of octree root                   (nmesh x 1)
  int*      mesh_octnum;          // number of octree nodes                   (nmesh x 1)
  int*      mesh_normaladr;       // first normal address                     (nmesh x 1)
  int*      mesh_normalnum;       // number of normals                        (nmesh x 1)
  int*      mesh_texcoordadr;     // texcoord data address; -1: no texcoord   (nmesh x 1)
  int*      mesh_texcoordnum;     // number of texcoord                       (nmesh x 1)
  int*      mesh_graphadr;        // graph data address; -1: no graph         (nmesh x 1)
  int*      mesh_extrema;         // extremum vertices in 3x3x3 directions    (nmesh x 27)
  float*    mesh_vert;            // vertex positions for all meshes          (nmeshvert x 3)
  float*    mesh_normal;          // normals for all meshes                   (nmeshnormal x 3)
  float*    mesh_texcoord;        // vertex texcoords for all meshes          (nmeshtexcoord x 2)
  int*      mesh_face;            // vertex face data                         (nmeshface x 3)
  int*      mesh_facenormal;      // normal face data                         (nmeshface x 3)
  int*      mesh_facetexcoord;    // texture face data                        (nmeshface x 3)
  int*      mesh_graph;           // convex graph data                        (nmeshgraph x 1)
  mjtNum*   mesh_scale;           // scaling applied to asset vertices        (nmesh x 3)
  mjtNum*   mesh_pos;             // translation applied to asset vertices    (nmesh x 3)
  mjtNum*   mesh_quat;            // rotation applied to asset vertices       (nmesh x 4)
  int*      mesh_pathadr;         // address of asset path for mesh; -1: none (nmesh x 1)
  int*      mesh_polynum;         // number of polygons per mesh              (nmesh x 1)
  int*      mesh_polyadr;         // first polygon address per mesh           (nmesh x 1)
  mjtNum*   mesh_polynormal;      // all polygon normals                      (nmeshpoly x 3)
  int*      mesh_polyvertadr;     // polygon vertex start address             (nmeshpoly x 1)
  int*      mesh_polyvertnum;     // number of vertices per polygon           (nmeshpoly x 1)
  int*      mesh_polyvert;        // all polygon vertices                     (nmeshpolyvert x 1)
  int*      mesh_polymapadr;      // first polygon address per vertex         (nmeshvert x 1)
  int*      mesh_polymapnum;      // number of polygons per vertex            (nmeshvert x 1)
  int*      mesh_polymap;         // vertex to polygon map                    (nmeshpolymap x 1)

  // skins
  int*      skin_matid;           // skin material id; -1: none               (nskin x 1)
  int*      skin_group;           // group for visibility                     (nskin x 1)
  float*    skin_rgba;            // skin rgba                                (nskin x 4)
  float*    skin_inflate;         // inflate skin in normal direction         (nskin x 1)
  int*      skin_vertadr;         // first vertex address                     (nskin x 1)
  int*      skin_vertnum;         // number of vertices                       (nskin x 1)
  int*      skin_texcoordadr;     // texcoord data address; -1: no texcoord   (nskin x 1)
  int*      skin_faceadr;         // first face address                       (nskin x 1)
  int*      skin_facenum;         // number of faces                          (nskin x 1)
  int*      skin_boneadr;         // first bone in skin                       (nskin x 1)
  int*      skin_bonenum;         // number of bones in skin                  (nskin x 1)
  float*    skin_vert;            // vertex positions for all skin meshes     (nskinvert x 3)
  float*    skin_texcoord;        // vertex texcoords for all skin meshes     (nskintexvert x 2)
  int*      skin_face;            // triangle faces for all skin meshes       (nskinface x 3)
  int*      skin_bonevertadr;     // first vertex in each bone                (nskinbone x 1)
  int*      skin_bonevertnum;     // number of vertices in each bone          (nskinbone x 1)
  float*    skin_bonebindpos;     // bind pos of each bone                    (nskinbone x 3)
  float*    skin_bonebindquat;    // bind quat of each bone                   (nskinbone x 4)
  int*      skin_bonebodyid;      // body id of each bone                     (nskinbone x 1)
  int*      skin_bonevertid;      // mesh ids of vertices in each bone        (nskinbonevert x 1)
  float*    skin_bonevertweight;  // weights of vertices in each bone         (nskinbonevert x 1)
  int*      skin_pathadr;         // address of asset path for skin; -1: none (nskin x 1)

  // height fields
  mjtNum*   hfield_size;          // (x, y, z_top, z_bottom)                  (nhfield x 4)
  int*      hfield_nrow;          // number of rows in grid                   (nhfield x 1)
  int*      hfield_ncol;          // number of columns in grid                (nhfield x 1)
  int*      hfield_adr;           // address in hfield_data                   (nhfield x 1)
  float*    hfield_data;          // elevation data                           (nhfielddata x 1)
  int*      hfield_pathadr;       // address of hfield asset path; -1: none   (nhfield x 1)

  // textures
  int*      tex_type;             // texture type (mjtTexture)                (ntex x 1)
  int*      tex_colorspace;       // texture colorspace (mjtColorSpace)       (ntex x 1)
  int*      tex_height;           // number of rows in texture image          (ntex x 1)
  int*      tex_width;            // number of columns in texture image       (ntex x 1)
  int*      tex_nchannel;         // number of channels in texture image      (ntex x 1)
  mjtSize*  tex_adr;              // start address in tex_data                (ntex x 1)
  mjtByte*  tex_data;             // pixel values                             (ntexdata x 1)
  int*      tex_pathadr;          // address of texture asset path; -1: none  (ntex x 1)

  // materials
  int*      mat_texid;            // indices of textures; -1: none            (nmat x mjNTEXROLE)
  mjtBool*  mat_texuniform;       // make texture cube uniform                (nmat x 1)
  float*    mat_texrepeat;        // texture repetition for 2d mapping        (nmat x 2)
  float*    mat_emission;         // emission (x rgb)                         (nmat x 1)
  float*    mat_specular;         // specular (x white)                       (nmat x 1)
  float*    mat_shininess;        // shininess coef                           (nmat x 1)
  float*    mat_reflectance;      // reflectance (0: disable)                 (nmat x 1)
  float*    mat_metallic;         // metallic coef                            (nmat x 1)
  float*    mat_roughness;        // roughness coef                           (nmat x 1)
  float*    mat_rgba;             // rgba                                     (nmat x 4)

  // predefined geom pairs for collision detection; has precedence over exclude
  int*      pair_dim;             // contact dimensionality                   (npair x 1)
  int*      pair_geom1;           // id of geom1                              (npair x 1)
  int*      pair_geom2;           // id of geom2                              (npair x 1)
  int*      pair_signature;       // body1 << 16 + body2                      (npair x 1)
  mjtNum*   pair_solref;          // solver reference: contact normal         (npair x mjNREF)
  mjtNum*   pair_solreffriction;  // solver reference: contact friction       (npair x mjNREF)
  mjtNum*   pair_solimp;          // solver impedance: contact                (npair x mjNIMP)
  mjtNum*   pair_margin;          // geometric inflation for contact          (npair x 1)
  mjtNum*   pair_gap;             // additional contact detection buffer      (npair x 1)
  mjtNum*   pair_adhesion;        // adhesive force of contacts               (npair x 1)
  mjtNum*   pair_friction;        // tangent1, 2, spin, roll1, 2              (npair x 5)

  // excluded body pairs for collision detection
  int*      exclude_signature;    // body1 << 16 + body2                      (nexclude x 1)

  // equality constraints
  int*      eq_type;              // constraint type (mjtEq)                  (neq x 1)
  int*      eq_obj1id;            // id of object 1                           (neq x 1)
  int*      eq_obj2id;            // id of object 2                           (neq x 1)
  int*      eq_objtype;           // type of both objects (mjtObj)            (neq x 1)
  mjtBool*  eq_active0;           // initial enable/disable constraint state  (neq x 1)
  mjtNum*   eq_solref;            // constraint solver reference              (neq x mjNREF)
  mjtNum*   eq_solimp;            // constraint solver impedance              (neq x mjNIMP)
  mjtNum*   eq_data;              // numeric data for constraint              (neq x mjNEQDATA)

  // tendons
  int*      tendon_adr;           // address of first object in tendon's path (ntendon x 1)
  int*      tendon_num;           // number of objects in tendon's path       (ntendon x 1)
  int*      tendon_matid;         // material id for rendering                (ntendon x 1)
  int*      tendon_actuatorid;    // actuator contributing damping / armature (ntendon x 1)
  int*      tendon_group;         // group for visibility                     (ntendon x 1)
  int*      tendon_treenum;       // number of trees along tendon's path      (ntendon x 1)
  int*      tendon_treeid;        // first two trees along tendon's path      (ntendon x 2)
  int*      ten_J_rownnz;         // number of non-zeros in Jacobian row      (ntendon x 1)
  int*      ten_J_rowadr;         // row start address in colind array        (ntendon x 1)
  int*      ten_J_colind;         // column indices in sparse Jacobian        (nJten x 1)
  mjtBool*  tendon_limited;       // does tendon have length limits           (ntendon x 1)
  mjtBool*  tendon_actfrclimited; // does tendon have actuator force limits   (ntendon x 1)
  mjtNum*   tendon_width;         // width for rendering                      (ntendon x 1)
  mjtNum*   tendon_solref_lim;    // constraint solver reference: limit       (ntendon x mjNREF)
  mjtNum*   tendon_solimp_lim;    // constraint solver impedance: limit       (ntendon x mjNIMP)
  mjtNum*   tendon_solref_fri;    // constraint solver reference: friction    (ntendon x mjNREF)
  mjtNum*   tendon_solimp_fri;    // constraint solver impedance: friction    (ntendon x mjNIMP)
  mjtNum*   tendon_range;         // tendon length limits                     (ntendon x 2)
  mjtNum*   tendon_actfrcrange;   // range of total actuator force            (ntendon x 2)
  mjtNum*   tendon_margin;        // min distance for limit detection         (ntendon x 1)
  mjtNum*   tendon_stiffness;     // linear stiffness coefficient             (ntendon x 1)
  mjtNum*   tendon_stiffnesspoly; // high-order stiffness coefficients        (ntendon x mjNPOLY)
  mjtNum*   tendon_damping;       // linear damping coefficient               (ntendon x 1)
  mjtNum*   tendon_dampingpoly;   // high-order damping coefficients          (ntendon x mjNPOLY)
  mjtNum*   tendon_armature;      // inertia associated with tendon velocity  (ntendon x 1)
  mjtNum*   tendon_frictionloss;  // loss due to friction                     (ntendon x 1)
  mjtNum*   tendon_lengthspring;  // spring resting length range              (ntendon x 2)
  mjtNum*   tendon_length0;       // tendon length in qpos0                   (ntendon x 1)
  mjtNum*   tendon_invweight0;    // inv. weight in qpos0                     (ntendon x 1)
  mjtNum*   tendon_user;          // user data                                (ntendon x nuser_tendon)
  float*    tendon_rgba;          // rgba when material is omitted            (ntendon x 4)

  // list of all wrap objects in tendon paths
  int*      wrap_type;            // wrap object type (mjtWrap)               (nwrap x 1)
  int*      wrap_objid;           // object id: geom, site, joint             (nwrap x 1)
  mjtNum*   wrap_prm;             // divisor, joint coef, or site id          (nwrap x 1)

  // actuators
  int*      actuator_trntype;     // transmission type (mjtTrn)               (nactuator x 1)
  int*      actuator_dyntype;     // dynamics type (mjtDyn)                   (nactuator x 1)
  int*      actuator_gaintype;    // gain type (mjtGain)                      (nactuator x 1)
  int*      actuator_biastype;    // bias type (mjtBias)                      (nactuator x 1)
  int*      actuator_ctrladr;     // address of first control                 (nactuator x 1)
  int*      actuator_ctrlnum;     // number of controls                       (nactuator x 1)
  int*      actuator_ctrlspec;    // input signature, scoped by gaintype      (nactuator x 1)
  int*      actuator_outadr;      // address of first force output            (nactuator x 1)
  int*      actuator_outnum;      // number of force outputs, from trntype    (nactuator x 1)
  int*      actuator_actadr;      // first activation address; -1: stateless  (nactuator x 1)
  int*      actuator_actnum;      // number of activation variables           (nactuator x 1)
  int*      actuator_trnid;       // transmission id: joint, tendon, site     (nactuator x 2)
  mjtNum*   actuator_cranklength; // crank length for slider-crank            (nactuator x 1)
  mjtNum*   actuator_dynprm;      // dynamics parameters                      (nactuator x mjNDYN)
  mjtNum*   actuator_gainprm;     // gain parameters                          (nactuator x mjNGAIN)
  mjtNum*   actuator_biasprm;     // bias parameters                          (nactuator x mjNBIAS)
  mjtBool*  actuator_actlimited;  // is activation limited                    (nactuator x 1)
  mjtNum*   actuator_actrange;    // range of activations                     (nactuator x 2)
  mjtBool*  actuator_actearly;    // step activation before force             (nactuator x 1)
  int*      actuator_history;     // history buffer: [nsample, interp]        (nactuator x 2)
  int*      actuator_historyadr;  // address in history buffer; -1: none      (nactuator x 1)
  mjtNum*   actuator_delay;       // delay time; 0: no delay                  (nactuator x 1)
  mjtNum*   actuator_damping;     // linear damping coefficient               (nactuator x 1)
  mjtNum*   actuator_dampingpoly; // high-order damping coefficients          (nactuator x mjNPOLY)
  mjtNum*   actuator_armature;    // armature added to target (joint, tendon) (nactuator x 1)
  int*      actuator_group;       // group for visibility                     (nactuator x 1)
  mjtNum*   actuator_user;        // user data                                (nactuator x nuser_actuator)
  int*      actuator_plugin;      // plugin instance id; -1: not a plugin     (nactuator x 1)
  mjtBool*  actuator_forcelimited;// is force limited                         (nactuator x 1)
  mjtNum*   actuator_forcerange;  // range of forces                          (nactuator x 2)
  mjtBool*  actuator_ctrllimited; // is control limited                       (nu x 1)
  mjtNum*   actuator_ctrlrange;   // range of controls                        (nu x 2)
  mjtNum*   actuator_gear;        // scale length and transmitted force       (nout x 6)
  mjtNum*   actuator_acc0;        // acceleration from unit force in qpos0    (nout x 1)
  mjtNum*   actuator_length0;     // actuator length in qpos0                 (nout x 1)
  mjtNum*   actuator_lengthrange; // feasible actuator length range           (nout x 2)

  // sensors
  int*      sensor_type;          // sensor type (mjtSensor)                  (nsensor x 1)
  int*      sensor_datatype;      // numeric data type (mjtDataType)          (nsensor x 1)
  int*      sensor_needstage;     // required compute stage (mjtStage)        (nsensor x 1)
  int*      sensor_objtype;       // type of sensorized object (mjtObj)       (nsensor x 1)
  int*      sensor_objid;         // id of sensorized object                  (nsensor x 1)
  int*      sensor_reftype;       // type of reference frame (mjtObj)         (nsensor x 1)
  int*      sensor_refid;         // id of reference frame; -1: global frame  (nsensor x 1)
  int*      sensor_intprm;        // sensor parameters                        (nsensor x mjNSENS)
  int*      sensor_dim;           // number of scalar outputs                 (nsensor x 1)
  int*      sensor_adr;           // address in sensor array                  (nsensor x 1)
  mjtNum*   sensor_cutoff;        // cutoff for real and positive; 0: ignore  (nsensor x 1)
  mjtNum*   sensor_noise;         // noise standard deviation                 (nsensor x 1)
  int*      sensor_history;       // history buffer: [nsample, interp]        (nsensor x 2)
  int*      sensor_historyadr;    // address in history buffer; -1: none      (nsensor x 1)
  mjtNum*   sensor_delay;         // delay time in seconds; 0: no delay       (nsensor x 1)
  mjtNum*   sensor_interval;      // interval: [period, phase] in seconds     (nsensor x 2)
  mjtNum*   sensor_user;          // user data                                (nsensor x nuser_sensor)
  int*      sensor_plugin;        // plugin instance id; -1: not a plugin     (nsensor x 1)

  // plugin instances
  int*      plugin;               // globally registered plugin slot number   (nplugin x 1)
  int*      plugin_stateadr;      // address in the plugin state array        (nplugin x 1)
  int*      plugin_statenum;      // number of states in the plugin instance  (nplugin x 1)
  char*     plugin_attr;          // config attributes of plugin instances    (npluginattr x 1)
  int*      plugin_attradr;       // address to each instance's config attrib (nplugin x 1)

  // custom numeric fields
  int*      numeric_adr;          // address of field in numeric_data         (nnumeric x 1)
  int*      numeric_size;         // size of numeric field                    (nnumeric x 1)
  mjtNum*   numeric_data;         // array of all numeric fields              (nnumericdata x 1)

  // custom text fields
  int*      text_adr;             // address of text in text_data             (ntext x 1)
  int*      text_size;            // size of text field (strlen+1)            (ntext x 1)
  char*     text_data;            // array of all text fields (0-terminated)  (ntextdata x 1)

  // custom tuple fields
  int*      tuple_adr;            // address of text in text_data             (ntuple x 1)
  int*      tuple_size;           // number of objects in tuple               (ntuple x 1)
  int*      tuple_objtype;        // array of object types in all tuples      (ntupledata x 1)
  int*      tuple_objid;          // array of object ids in all tuples        (ntupledata x 1)
  mjtNum*   tuple_objprm;         // array of object params in all tuples     (ntupledata x 1)

  // keyframes
  mjtNum*   key_time;             // key time                                 (nkey x 1)
  mjtNum*   key_qpos;             // key position                             (nkey x nq)
  mjtNum*   key_qvel;             // key velocity                             (nkey x nv)
  mjtNum*   key_act;              // key activation                           (nkey x na)
  mjtNum*   key_mpos;             // key mocap position                       (nkey x nmocap*3)
  mjtNum*   key_mquat;            // key mocap quaternion                     (nkey x nmocap*4)
  mjtNum*   key_ctrl;             // key control                              (nkey x nu)

  // names
  int*      name_bodyadr;         // body name pointers                       (nbody x 1)
  int*      name_jntadr;          // joint name pointers                      (njnt x 1)
  int*      name_geomadr;         // geom name pointers                       (ngeom x 1)
  int*      name_siteadr;         // site name pointers                       (nsite x 1)
  int*      name_camadr;          // camera name pointers                     (ncam x 1)
  int*      name_lightadr;        // light name pointers                      (nlight x 1)
  int*      name_flexadr;         // flex name pointers                       (nflex x 1)
  int*      name_meshadr;         // mesh name pointers                       (nmesh x 1)
  int*      name_skinadr;         // skin name pointers                       (nskin x 1)
  int*      name_hfieldadr;       // hfield name pointers                     (nhfield x 1)
  int*      name_texadr;          // texture name pointers                    (ntex x 1)
  int*      name_matadr;          // material name pointers                   (nmat x 1)
  int*      name_pairadr;         // geom pair name pointers                  (npair x 1)
  int*      name_excludeadr;      // exclude name pointers                    (nexclude x 1)
  int*      name_eqadr;           // equality constraint name pointers        (neq x 1)
  int*      name_tendonadr;       // tendon name pointers                     (ntendon x 1)
  int*      name_actuatoradr;     // actuator name pointers                   (nactuator x 1)
  int*      name_sensoradr;       // sensor name pointers                     (nsensor x 1)
  int*      name_numericadr;      // numeric name pointers                    (nnumeric x 1)
  int*      name_textadr;         // text name pointers                       (ntext x 1)
  int*      name_tupleadr;        // tuple name pointers                      (ntuple x 1)
  int*      name_keyadr;          // keyframe name pointers                   (nkey x 1)
  int*      name_pluginadr;       // plugin instance name pointers            (nplugin x 1)
  char*     names;                // names of all objects, 0-terminated       (nnames x 1)
  int*      names_map;            // internal hash map of names               (nnames_map x 1)

  // paths
  char*     paths;                // paths to assets, 0-terminated            (npaths x 1)

  // sparse structures
  int*      B_rownnz;             // body-dof: non-zeros in each row          (nbody x 1)
  int*      B_rowadr;             // body-dof: row addresses                  (nbody x 1)
  int*      B_colind;             // body-dof: column indices                 (nB x 1)
  int*      M_rownnz;             // reduced inertia: non-zeros in each row   (nv x 1)
  int*      M_rowadr;             // reduced inertia: row addresses           (nv x 1)
  int*      M_colind;             // reduced inertia: column indices          (nC x 1)
  int*      mapM2M;               // index mapping from qM to M               (nC x 1)
  int*      D_rownnz;             // full inertia: non-zeros in each row      (nv x 1)
  int*      D_rowadr;             // full inertia: row addresses              (nv x 1)
  int*      D_diag;               // full inertia: index of diagonal element  (nv x 1)
  int*      D_colind;             // full inertia: column indices             (nD x 1)
  int*      mapM2D;               // index mapping from M to D                (nD x 1)
  int*      mapD2M;               // index mapping from D to M                (nC x 1)

  // compilation signature
  uint64_t  signature;            // also held by the mjSpec that compiled this model
} mjModel;
typedef struct mjResource_ {
  char* name;                                   // name of resource (filename, etc)
  void* data;                                   // opaque data pointer
  mjVFS* vfs;                                   // pointer to the VFS
  char timestamp[512];                          // timestamp of the resource
  const struct mjpResourceProvider* provider;   // pointer to the provider
  const char* args;  // resource arguments/hints, URI query format key=val&...
                     // (optional)
} mjResource;
typedef struct mjpResourceProvider {
  const char* prefix;               // prefix for match against a resource name
  mjfOpenResource open;             // opening callback
  mjfReadResource read;             // reading callback
  mjfCloseResource close;           // closing callback
  mjfMountResource mount;           // mounting callback (optional)
  mjfUnmountResource unmount;       // unmounting callback (optional)
  mjfResourceModified modified;     // resource modified callback (optional)
  mjfWriteResource write;           // writing callback (optional)
  void* data;                       // opaque data pointer (resource invariant)
} mjpResourceProvider;
typedef struct mjpDecoder {
  const char* content_type;
  const char* extension;
  // user-facing functions
  mjfCanDecode can_decode;  // quickly check if this decoder can handle the resource
  mjfDecode decode;         // main decoding function
  // the caller takes ownership of the spec returned by decode and is responsible
  // for cleaning it up
} mjpDecoder;
typedef struct mjpEncoder {
  const char* content_type;
  const char* extension;
  mjfEncode encode;  //  Function to encode an mjSpec and mjModel to a mjResource.
  mjfCloseResource close_resource;  // Function to close/free the resource.
} mjpEncoder;
typedef enum mjtPluginCapabilityBit_ {
  mjPLUGIN_ACTUATOR = 1<<0,       // actuator forces
  mjPLUGIN_SENSOR   = 1<<1,       // sensor measurements
  mjPLUGIN_PASSIVE  = 1<<2,       // passive forces
  mjPLUGIN_SDF      = 1<<3,       // signed distance fields
} mjtPluginCapabilityBit;
typedef struct mjpPlugin_ {
  const char* name;               // globally unique name identifying the plugin

  int nattribute;                 // number of configuration attributes
  const char* const* attributes;  // name of configuration attributes

  int capabilityflags;            // plugin capabilities: bitfield of mjtPluginCapabilityBit
  int needstage;                  // sensor computation stage (mjtStage)

  // number of mjtNums needed to store the state of a plugin instance (required)
  int (*nstate)(const mjModel* m, int instance);

  // dimension of the specified sensor's output (required only for sensor plugins)
  int (*nsensordata)(const mjModel* m, int instance, int sensor_id);

  // called when a new mjData is being created (required), returns 0 on success or -1 on failure
  int (*init)(const mjModel* m, mjData* d, int instance);

  // called when an mjData is being freed (optional)
  void (*destroy)(mjData* d, int instance);

  // called when an mjData is being copied (optional)
  void (*copy)(mjData* dest, const mjModel* m, const mjData* src, int instance);

  // called when an mjData is being reset (required)
  void (*reset)(const mjModel* m, mjtNum* plugin_state, void* plugin_data, int instance);

  // called when the plugin needs to update its outputs (required)
  void (*compute)(const mjModel* m, mjData* d, int instance, int capability_bit);

  // called when time integration occurs (optional)
  void (*advance)(const mjModel* m, mjData* d, int instance);

  // called by mjv_updateScene (optional)
  void (*visualize)(const mjModel*m, mjData* d, const mjvOption* opt, mjvScene* scn, int instance);

  // methods specific to actuators (optional)

  // updates the actuator plugin's entries in act_dot
  // called after native act_dot is computed and before the compute callback
  void (*actuator_act_dot)(const mjModel* m, mjData* d, int instance);

  // methods specific to signed distance fields (optional)

  // signed distance from the surface
  mjtNum (*sdf_distance)(const mjtNum point[3], const mjData* d, int instance);

  // gradient of distance with respect to local coordinates
  void (*sdf_gradient)(mjtNum gradient[3], const mjtNum point[3], const mjData* d, int instance);

  // called during compilation for marching cubes
  mjtNum (*sdf_staticdistance)(const mjtNum point[3], const mjtNum* attributes);

  // convert attributes and provide defaults if not present
  void (*sdf_attribute)(mjtNum attribute[], const char* name[], const char* value[]);

  // bounding box of implicit surface
  void (*sdf_aabb)(mjtNum aabb[6], const mjtNum* attributes);
} mjpPlugin;
typedef struct mjSDF_ {
  const mjpPlugin** plugin;
  int* id;
  mjtSDFType type;
  mjtNum* relpos;
  mjtNum* relmat;
  mjtGeom* geomtype;
} mjSDF;
typedef enum mjtGridPos_ {        // grid position for overlay
  mjGRID_TOPLEFT      = 0,        // top left
  mjGRID_TOPRIGHT,                // top right
  mjGRID_BOTTOMLEFT,              // bottom left
  mjGRID_BOTTOMRIGHT,             // bottom right
  mjGRID_TOP,                     // top center
  mjGRID_BOTTOM,                  // bottom center
  mjGRID_LEFT,                    // left center
  mjGRID_RIGHT                    // right center
} mjtGridPos;
typedef enum mjtFramebuffer_ {    // OpenGL framebuffer option
  mjFB_WINDOW         = 0,        // default/window buffer
  mjFB_OFFSCREEN                  // offscreen buffer
} mjtFramebuffer;
typedef enum mjtDepthMap_ {       // depth mapping for `mjr_readPixels`
  mjDEPTH_ZERONEAR    = 0,        // standard depth map; 0: znear, 1: zfar
  mjDEPTH_ZEROFAR     = 1         // reversed depth map; 1: znear, 0: zfar
} mjtDepthMap;
typedef enum mjtFontScale_ {      // font scale, used at context creation
  mjFONTSCALE_50      = 50,       // 50% scale, suitable for low-res rendering
  mjFONTSCALE_100     = 100,      // normal scale, suitable in the absence of DPI scaling
  mjFONTSCALE_150     = 150,      // 150% scale
  mjFONTSCALE_200     = 200,      // 200% scale
  mjFONTSCALE_250     = 250,      // 250% scale
  mjFONTSCALE_300     = 300       // 300% scale
} mjtFontScale;
typedef enum mjtFont_ {           // font type, used at each text operation
  mjFONT_NORMAL       = 0,        // normal font
  mjFONT_SHADOW,                  // normal font with shadow (for higher contrast)
  mjFONT_BIG                      // big font (for user alerts)
} mjtFont;
typedef enum mjrPixelFormat_ {    // pixel format for textures
  mjPIXEL_FORMAT_UNKNOWN = 0,     // unknown/unspecified
  mjPIXEL_FORMAT_R8,              // 1 channel, 8 bit
  mjPIXEL_FORMAT_RGB8,            // 3 channels, 8 bits per channel
  mjPIXEL_FORMAT_RGBA8,           // 4 channels, 8 bits per channel
  mjPIXEL_FORMAT_R32F,            // 1 channel, 32 bit float
  mjPIXEL_FORMAT_DEPTH32F,        // 1 channel, 32 bit float, for depth buffers
  mjPIXEL_FORMAT_KTX,             // ktx compressed data
} mjrPixelFormat;
typedef enum mjrVertexAttributeUsage_ {   // usage/purpose of a vertex attribute
  mjVERTEX_ATTRIBUTE_USAGE_POSITION = 0,  // vertex position
  mjVERTEX_ATTRIBUTE_USAGE_NORMAL,        // vertex normal
  mjVERTEX_ATTRIBUTE_USAGE_TANGENTS,      // vertex tangents
  mjVERTEX_ATTRIBUTE_USAGE_UV,            // vertex texture coordinates
  mjVERTEX_ATTRIBUTE_USAGE_COLOR,         // vertex color
} mjrVertexAttributeUsage;
typedef enum mjrVertexAttributeType_ {  // data format of a vertex attribute
  mjVERTEX_ATTRIBUTE_TYPE_FLOAT2 = 0,   // 2D 32-bit float vector
  mjVERTEX_ATTRIBUTE_TYPE_FLOAT3,       // 3D 32-bit float vector
  mjVERTEX_ATTRIBUTE_TYPE_FLOAT4,       // 4D 32-bit float vector
  mjVERTEX_ATTRIBUTE_TYPE_UBYTE4,       // 4D unsigned 8-bit byte vector
} mjrVertexAttributeType;
typedef enum mjrIndexType_ {  // data type of index buffer data
  mjINDEX_TYPE_U16 = 0,       // 16-bit unsigned integer
  mjINDEX_TYPE_U32,           // 32-bit unsigned integer
} mjrIndexType;
typedef enum mjrMeshPrimitiveType_ {    // type of mesh primitive
  mjMESH_PRIMITIVE_TYPE_TRIANGLES = 0,  // triangles
  mjMESH_PRIMITIVE_TYPE_LINES,          // lines
} mjrMeshPrimitiveType;
typedef struct mjrRect_ {         // OpenGL rectangle
  int left;                       // left (usually 0)
  int bottom;                     // bottom (usually 0)
  int width;                      // width (usually buffer width)
  int height;                     // height (usually buffer height)
} mjrRect;
typedef struct mjrRendererInfo_ {  // active renderer identity
  const char* renderer;            // renderer family: classic, filament, noop
  const char* backend;             // graphics backend: opengl, vulkan; empty if uninitialized
} mjrRendererInfo;
typedef struct mjrVertexAttribute_ {  // vertex attribute format specification
  int usage;                          // position, normal, etc [mjrVertexAttributeUsage]
  int type;                           // float3, ubyte4, etc. [mjrVertexAttributeType]
} mjrVertexAttribute;
typedef struct mjrContext_ {        // custom OpenGL context
  // parameters copied from mjVisual
  float lineWidth;                  // line width for wireframe rendering
  float shadowClip;                 // clipping radius for directional lights
  float shadowScale;                // fraction of light cutoff for spot lights
  float fogStart;                   // fog start = stat.extent * vis.map.fogstart
  float fogEnd;                     // fog end = stat.extent * vis.map.fogend
  float fogRGBA[4];                 // fog rgba
  int shadowSize;                   // size of shadow map texture
  int offWidth;                     // width of offscreen buffer
  int offHeight;                    // height of offscreen buffer
  int offSamples;                   // number of offscreen buffer multisamples

  // parameters specified at creation
  int fontScale;                    // font scale
  int auxWidth[mjNAUX];             // auxiliary buffer width
  int auxHeight[mjNAUX];            // auxiliary buffer height
  int auxSamples[mjNAUX];           // auxiliary buffer multisamples

  // offscreen rendering objects
  unsigned int offFBO;              // offscreen framebuffer object
  unsigned int offFBO_r;            // offscreen framebuffer for resolving multisamples
  unsigned int offColor;            // offscreen color buffer
  unsigned int offColor_r;          // offscreen color buffer for resolving multisamples
  unsigned int offDepthStencil;     // offscreen depth and stencil buffer
  unsigned int offDepthStencil_r;   // offscreen depth and stencil buffer for multisamples

  // shadow rendering objects
  unsigned int shadowFBO;           // shadow map framebuffer object
  unsigned int shadowTex;           // shadow map texture

  // auxiliary buffers
  unsigned int auxFBO[mjNAUX];      // auxiliary framebuffer object
  unsigned int auxFBO_r[mjNAUX];    // auxiliary framebuffer object for resolving
  unsigned int auxColor[mjNAUX];    // auxiliary color buffer
  unsigned int auxColor_r[mjNAUX];  // auxiliary color buffer for resolving

  // materials with textures
  int mat_texid[mjMAXMATERIAL*mjNTEXROLE]; // material texture ids (-1: no texture)
  int mat_texuniform[mjMAXMATERIAL];       // uniform cube mapping
  float mat_texrepeat[mjMAXMATERIAL*2];    // texture repetition for 2d mapping

  // texture objects and info
  int ntexture;                            // number of allocated textures
  int textureType[mjMAXTEXTURE];           // type of texture (mjtTexture) (ntexture)
  unsigned int texture[mjMAXTEXTURE];      // texture names

  // displaylist starting positions
  unsigned int basePlane;           // all planes from model
  unsigned int baseMesh;            // all meshes from model
  unsigned int baseHField;          // all height fields from model
  unsigned int baseBuiltin;         // all builtin geoms, with quality from model
  unsigned int baseFontNormal;      // normal font
  unsigned int baseFontShadow;      // shadow font
  unsigned int baseFontBig;         // big font

  // displaylist ranges
  int rangePlane;                   // all planes from model
  int rangeMesh;                    // all meshes from model
  int rangeHField;                  // all hfields from model
  int rangeBuiltin;                 // all builtin geoms, with quality from model
  int rangeFont;                    // all characters in font

  // skin VBOs
  int nskin;                        // number of skins
  unsigned int* skinvertVBO;        // skin vertex position VBOs (nskin)
  unsigned int* skinnormalVBO;      // skin vertex normal VBOs (nskin)
  unsigned int* skintexcoordVBO;    // skin vertex texture coordinate VBOs (nskin)
  unsigned int* skinfaceVBO;        // skin face index VBOs (nskin)

  // character info
  int charWidth[127];               // character widths: normal and shadow
  int charWidthBig[127];            // character widths: big
  int charHeight;                   // character heights: normal and shadow
  int charHeightBig;                // character heights: big

  // capabilities
  int glInitialized;                // is OpenGL initialized
  int windowAvailable;              // is default/window framebuffer available
  int windowSamples;                // number of samples for default/window framebuffer
  int windowStereo;                 // is stereo available for default/window framebuffer
  int windowDoublebuffer;           // is default/window framebuffer double buffered

  // framebuffer
  int currentBuffer;                // currently active framebuffer: mjFB_WINDOW or mjFB_OFFSCREEN

  // pixel output format
  int readPixelFormat;              // default color pixel format for mjr_readPixels

  // depth output format
  int readDepthMap;                 // depth mapping: mjDEPTH_ZERONEAR or mjDEPTH_ZEROFAR
} mjrContext;
typedef struct mjrfContext_ mjrfContext;
typedef struct mjrfTexture_ mjrfTexture;
typedef struct mjrfMesh_ mjrfMesh;
typedef struct mjrfScene_ mjrfScene;
typedef struct mjrfLight_ mjrfLight;
typedef struct mjrfRenderable_ mjrfRenderable;
typedef struct mjrfRenderTarget_ mjrfRenderTarget;
typedef enum mjrGraphicsApi_ {
  mjGRAPHICS_API_DEFAULT = 0,   // default (platform-dependent)
  mjGRAPHICS_API_OPENGL,        // desktop, mobile (GLES), web (WebGL)
  mjGRAPHICS_API_VULKAN,        // vulkan
} mjrGraphicsApi;
typedef struct mjrfContextConfig_ {
  int graphics_api;                  // rendering graphics API [mjrGraphicsApi]
  mjtBool force_software_rendering;  // force backend to use software rendering
  void* native_window;               // platform-dependent window handle (or nullptr for windowless)
} mjrfContextConfig;
typedef enum mjrDrawMode_ {
  mjDRAW_MODE_DEFAULT,                // default colors and lighting
  mjDRAW_MODE_DEFAULT_NO_TEXTURES,    // default, but without textures
  mjDRAW_MODE_WIREFRAME,              // wireframe rendering
  mjDRAW_MODE_DEPTH,                  // grayscale depth map
  mjDRAW_MODE_ISLANDS,                // color objects based on island and sleep state
  mjDRAW_MODE_SEGMENTATION_BY_ID,     // color objects based on segmentation id
  mjDRAW_MODE_SEGMENTATION_BY_COLOR,  // generate visually distinct colors using segmentation id
} mjrDrawMode;
typedef struct mjrfRenderRequest_ {
  mjrfScene* scene;                  // scene to render
  mjrCamera camera;                  // camera (viewpoint) from which to render scene
  mjrRect viewport;                  // viewport (rect area) into which to render
  mjrfRenderTarget* target;          // target used for rendering (or nullptr for window rendering)
  int draw_mode;                     // method to use for drawing objects [mjrDrawMode]
  mjtBool enable_post_processing;    // enable post processing, enabled by default
  mjtBool enable_reflections;        // enable reflections, enabled by default
  mjtBool enable_shadows;            // enable shadows, enabled by default

  // The headlight is a directional light aligned with this request's camera. It
  // is a property of the request rather than of the scene, so that a scene
  // rendered from several cameras is not lit by any one of them.
  mjtBool enable_headlight;          // enable the headlight, disabled by default
  float headlight_color[3];          // headlight color, RGB
  float headlight_intensity;         // headlight intensity, in lux
} mjrfRenderRequest;
typedef struct mjrfReadPixelsRequest_ {
  mjrfRenderTarget* target;              // render target from which to read the image pixels
  void* output;                          // buffer into which the pixels will be stored
  mjtSize num_bytes;                     // size of output buffer
  mjrfCallback read_completed;           // callback when read is complete; can use to free output
  void* user_data;                       // user data for read_completed_callback
} mjrfReadPixelsRequest;
typedef struct mjrfFrameStats_ {
  double frame_rate;              // frame rate, in frames per second
} mjrfFrameStats;
typedef struct mjrfTextureConfig_ {
  int width;                         // texture width, or number of bytes for compressed data (e.g. KTX)
  int height;                        // texture height, or 0 for compressed data (e.g. KTX)
  int format;                        // pixel format (e.g. RGB8, RGBA8, KTX, etc.) [mjrPixelFormat]
  int color_space;                   // color space (e.g. LINEAR, sRGB, etc.) [mjrColorSpace]
  int sampler_type;                  // texture sampler (e.g. 2D, cube, etc.) [mjrSamplerType]
} mjrfTextureConfig;
typedef struct mjrfTextureData_ {
  const void* bytes;               // pointer to image data, or nullptr for empty texture
  mjtSize num_bytes;               // number of bytes in the image data
  mjrfCallback release;            // callback when data has finished uploading
  void* user_data;                 // user data for release callback
} mjrfTextureData;
typedef struct mjrfMeshConfig_ {
  mjtSize max_vertices;         // maximum number of vertices
  mjtSize max_indices;          // maximum number of indices
  int num_attributes;           // number of defined attributes
  mjrVertexAttribute attributes[mjMAX_VERTEX_ATTRIBUTES];  // per-vertex attribute information
  mjtBool interleaved;          // true if vertex attributes are interleaved
  int index_type;               // index data format (e.g. UINT16 or UINT32) [mjrIndexType]
  int primitive_type;           // index interpretation (e.g. TRIANGLES, etc.) [mjrMeshPrimitiveType]
} mjrfMeshConfig;
typedef struct mjrfMeshData_ {
  mjtSize num_vertices;         // number of vertices
  const void* vertices[mjMAX_VERTEX_ATTRIBUTES];  // per-vertex attribute data arrays
  mjtSize num_indices;          // number of indices
  const void* indices;          // indices data array
  mjtBool compute_bounds;       // if true, compute bounds from vertex positions
  float bounds_min[3];          // min/max bounds; assume unset if bounds_min == bounds_max
  float bounds_max[3];
  mjrfCallback release;         // callback when data has finished uploading
  void* user_data;              // user data for release callback
} mjrfMeshData;
typedef struct mjrfSceneParams_ {
  char unused;  // ensure min size of 1 for C/C++ compatibility
} mjrfSceneParams;
typedef struct mjrfLightParams_ {
  int type;                        // type of light (e.g. spot, point, image, etc.) [mjrLightType]
  const mjrfTexture* texture;      // texture; only for image lights
  float color[3];                  // RGB color
  float intensity;                 // light intensity, in candela
  mjtBool cast_shadows;            // if true, cast shadows
  float range;                     // effective range of light, in meters
  float spot_cone_angle;           // spot light cone angle, in degrees
  float spot_softness;             // spot light edge softness, fraction of cone angle in [0, 1]
  int shadow_map_size;             // size of shadow map texture, 0 to use default size
  float bulb_radius;               // bulb radius, used for soft shadows
  float vsm_blur_width;            // variance shadow map blur width
} mjrfLightParams;
typedef struct mjrfMaterial_ {
  float color[4];               // object color; defaults to white
  int32_t segmentation_id;      // ID for segmentation rendering; maps to RGB8 color (i.e. 24 bits)
  int32_t island_id;            // ID to which the renderable belongs
  int sleep_state;              // sleep state of the renderable [mjtSleepState]
  float uv_scale[3];            // scale applied to UV coordinates; defaults to (1,1,1)
  float uv_offset[3];           // offset applied to UV coordinates; defaults to (0,0,0)
  float scissor[4];             // if non-zero, applies scissor testing when rendering
  float metallic;               // metallic factory [0, 1]; disabled if < 0
  float roughness;              // roughness factor [0, 1]; disabled if < 0
  float specular;               // specular factor [0, 1]; disabled if < 0
  float glossiness;             // glossiness factor [0, 1]; disabled if < 0
  float emissive;               // emissive/glow factor [0, 1]; disabled if < 0
  float reflectance;            // blend factor for reflective surfaces [0, 1]; applies only to planes
  mjtBool decor_ux;             // for ux elements, does not apply any lighting
  mjtBool selected;             // for "selected" ux elements, adds additional styling
  const mjrfTexture* color_texture;       // color/albedo texture (RGB8)
  const mjrfTexture* opacity_texture;     // opacity texture (A8)
  const mjrfTexture* normal_texture;      // normal map texture (RGB8)
  const mjrfTexture* metallic_texture;    // metallic map texture (R8)
  const mjrfTexture* roughness_texture;   // roughness map texture (R8)
  const mjrfTexture* occlusion_texture;   // ambient occlusion texture (R8)
  const mjrfTexture* orm_texture;         // occlusion/roughness/metallic texture (RGB8)
  const mjrfTexture* emissive_texture;    // emissive texture (RGB8)
  const mjrfTexture* reflection_texture;  // reflection texture, for internal use only
  float reflection_normal[3];      // mirror normal, gates reflection to front face (internal)
  float reflection_view_proj[16];  // main camera view-proj for reflection UV mapping (internal)
} mjrfMaterial;
typedef struct mjrfRenderableParams_ {
  mjtBool cast_shadows;                 // if true, casts shadows
  mjtBool receive_shadows;              // if true, receives shadows
  uint16_t blend_order;                 // controls draw order for transparent objects [0, 8]
} mjrfRenderableParams;
typedef struct mjrfRenderTargetConfig_ {
  int width;                              // texture width
  int height;                             // texture height
  int color_format;                       // pixel format for color buffer [mjrPixelFormat]
  int depth_format;                       // pixel format for depth buffer [mjrPixelFormat]
} mjrfRenderTargetConfig;
typedef enum mjtGeomInertia {      // type of inertia inference
  mjINERTIA_VOLUME = 0,            // mass distributed in the volume
  mjINERTIA_SHELL,                 // mass distributed on the surface
} mjtGeomInertia;
typedef enum mjtMeshInertia {      // type of mesh inertia
  mjMESH_INERTIA_CONVEX = 0,       // convex mesh inertia
  mjMESH_INERTIA_EXACT,            // exact mesh inertia
  mjMESH_INERTIA_LEGACY,           // legacy mesh inertia
  mjMESH_INERTIA_SHELL             // shell mesh inertia
} mjtMeshInertia;
typedef enum mjtMeshBuiltin {      // type of built-in procedural mesh
  mjMESH_BUILTIN_NONE = 0,         // no built-in mesh
  mjMESH_BUILTIN_SPHERE,           // sphere
  mjMESH_BUILTIN_HEMISPHERE,       // hemisphere
  mjMESH_BUILTIN_CONE,             // cone
  mjMESH_BUILTIN_SUPERSPHERE,      // supersphere
  mjMESH_BUILTIN_SUPERTORUS,       // supertorus
  mjMESH_BUILTIN_WEDGE,            // wedge
  mjMESH_BUILTIN_PLATE,            // plate
} mjtMeshBuiltin;
typedef enum mjtBuiltin {          // type of built-in procedural texture
  mjBUILTIN_NONE = 0,              // no built-in texture
  mjBUILTIN_GRADIENT,              // gradient: rgb1->rgb2
  mjBUILTIN_CHECKER,               // checker pattern: rgb1, rgb2
  mjBUILTIN_FLAT                   // 2d: rgb1; cube: rgb1-up, rgb2-side, rgb3-down
} mjtBuiltin;
typedef enum mjtMark {             // mark type for procedural textures
  mjMARK_NONE = 0,                 // no mark
  mjMARK_EDGE,                     // edges
  mjMARK_CROSS,                    // cross
  mjMARK_RANDOM                    // random dots
} mjtMark;
typedef enum mjtLimited {          // type of limit specification
  mjLIMITED_FALSE = 0,             // not limited
  mjLIMITED_TRUE,                  // limited
  mjLIMITED_AUTO,                  // limited inferred from presence of range
} mjtLimited;
typedef enum mjtAlignFree {        // whether to align free joints with the inertial frame
  mjALIGNFREE_FALSE = 0,           // don't align
  mjALIGNFREE_TRUE,                // align
  mjALIGNFREE_AUTO,                // respect the global compiler flag
} mjtAlignFree;
typedef enum mjtInertiaFromGeom {  // whether to infer body inertias from child geoms
  mjINERTIAFROMGEOM_FALSE = 0,     // do not use; inertial element required
  mjINERTIAFROMGEOM_TRUE,          // always use; overwrite inertial element
  mjINERTIAFROMGEOM_AUTO           // use only if inertial element is missing
} mjtInertiaFromGeom;
typedef enum mjtOrientation {      // type of orientation specifier
  mjORIENTATION_QUAT = 0,          // quaternion
  mjORIENTATION_AXISANGLE,         // axis and angle
  mjORIENTATION_XYAXES,            // x and y axes
  mjORIENTATION_ZAXIS,             // z axis (minimal rotation)
  mjORIENTATION_EULER,             // Euler angles
} mjtOrientation;
typedef enum mjtConflict {         // conflict resolution for attach
  mjCONFLICT_WARNING = 0,          // keep parent, warn on conflict
  mjCONFLICT_MERGE,                // merge: min/max/error per field
  mjCONFLICT_ERROR,                // error on any conflict
} mjtConflict;
typedef enum mjtCTimer {           // compiler timing categories
  // top-level timers (wall-clock)
  mjCTIMER_TOTAL = 0,              // total compile time
  mjCTIMER_ASSETS,                 // asset compilation

  // asset sub-timers (CPU time, summed across all assets)
  mjCTIMER_TEXTURE,                // textures
  mjCTIMER_MESH_LOAD,              // mesh: file loading
  mjCTIMER_MESH_HULL,              // mesh: convex hull
  mjCTIMER_MESH_POLYGON,           // mesh: normals and polygons
  mjCTIMER_MESH_INERTIA,           // mesh: volume, CoM, inertia
  mjCTIMER_MESH_BVH,               // mesh: bounding volume hierarchy
  mjCTIMER_MESH_OCTREE,            // mesh: octree and SDF

  mjNCTIMER                        // number of compiler timers
} mjtCTimer;
typedef struct mjsElement_ {       // element type, do not modify
  mjtObj elemtype;                 // element type
  uint64_t signature;              // compilation signature
} mjsElement;
typedef struct mjsCompiler_ {      // compiler options
  mjtBool autolimits;              // infer "limited" attribute based on range
  double boundmass;                // enforce minimum body mass
  double boundinertia;             // enforce minimum body diagonal inertia
  double settotalmass;             // rescale masses and inertias; <=0: ignore
  mjtBool balanceinertia;          // automatically impose A + B >= C rule
  mjtBool fitaabb;                 // meshfit to aabb instead of inertia box
  mjtBool degree;                  // angles in radians or degrees
  char eulerseq[3];                // sequence for euler rotations
  mjtBool discardvisual;           // discard visual geoms in parser
  mjtBool usethread;               // use multiple threads to speed up compiler
  mjtBool fusestatic;              // fuse static bodies with parent
  mjtInertiaFromGeom inertiafromgeom; // use geom inertias
  int inertiagrouprange[2];        // range of geom groups used to compute inertia
  mjtBool saveinertial;            // save explicit inertial clause for all bodies to XML
  mjtBool alignfree;               // align free joints with inertial frame
  mjtConflict conflict;            // conflict resolution for attach
  mjLROpt LRopt;                   // options for lengthrange computation
  mjString* meshdir;               // mesh and hfield directory
  mjString* texturedir;            // texture directory
  uint64_t authored;               // bitmask of authored compiler fields
} mjsCompiler;
typedef struct mjsAuthored_ {      // authored tracking bitmasks for mjModel structs
  uint64_t option;                 // authored mjOption fields
  int      disableflags;           // individual authored disable flags
  int      enableflags;            // individual authored enable flags
  int      disableactuator;        // individual authored actuator groups
  uint64_t visual_global;          // authored visual.global fields
  uint64_t visual_quality;         // authored visual.quality fields
  uint64_t visual_headlight;       // authored visual.headlight fields
  uint64_t visual_map;             // authored visual.map fields
  uint64_t visual_scale;           // authored visual.scale fields
  uint64_t visual_rgba;            // authored visual.rgba fields
} mjsAuthored;
typedef struct mjSpec_ {           // model specification
  mjsElement* element;             // element type
  mjString* modelname;             // model name

  // compiler data
  mjsCompiler compiler;            // compiler options
  mjtBool strippath;               // automatically strip paths from mesh files

  // engine data
  mjOption option;                 // physics options
  mjVisual visual;                 // visual options
  mjStatistic stat;                // statistics override (if defined)

  // sizes
  mjtSize memory;                  // number of bytes in arena+stack memory
  int nemax;                       // max number of equality constraints
  int nuserdata;                   // number of mjtNums in userdata
  int nuser_body;                  // number of mjtNums in body_user
  int nuser_jnt;                   // number of mjtNums in jnt_user
  int nuser_geom;                  // number of mjtNums in geom_user
  int nuser_site;                  // number of mjtNums in site_user
  int nuser_cam;                   // number of mjtNums in cam_user
  int nuser_tendon;                // number of mjtNums in tendon_user
  int nuser_actuator;              // number of mjtNums in actuator_user
  int nuser_sensor;                // number of mjtNums in sensor_user
  int nkey;                        // number of keyframes
  int njmax;                       // (deprecated) max number of constraints
  int nconmax;                     // (deprecated) max number of detected contacts
  mjtSize nstack;                  // (deprecated) number of mjtNums in mjData stack

  // global data
  mjString* comment;               // comment at top of XML
  mjString* modelfiledir;          // path to model file

  // other
  mjtBool hasImplicitPluginElem;   // already encountered an implicit plugin sensor/actuator

  // authored tracking bitmasks for mjModel structs
  mjsAuthored authored;
} mjSpec;
typedef struct mjsOrientation_ {   // alternative orientation specifiers
  mjtOrientation type;             // active orientation specifier
  double axisangle[4];             // axis and angle
  double xyaxes[6];                // x and y axes
  double zaxis[3];                 // z axis (minimal rotation)
  double euler[3];                 // Euler angles
} mjsOrientation;
typedef struct mjsPlugin_ {        // plugin specification
  mjsElement* element;             // element type
  mjString* name;                  // instance name
  mjString* plugin_name;           // plugin name
  mjtBool active;                  // is the plugin active
  mjString* info;                  // message appended to compiler errors
} mjsPlugin;
typedef struct mjsBody_ {          // body specification
  mjsElement* element;             // element type
  mjString* childclass;            // childclass name

  // body frame
  double pos[3];                   // frame position
  double quat[4];                  // frame orientation
  mjsOrientation alt;              // frame alternative orientation

  // inertial frame
  double mass;                     // mass
  double ipos[3];                  // inertial frame position
  double iquat[4];                 // inertial frame orientation
  double inertia[3];               // diagonal inertia (in i-frame)
  mjsOrientation ialt;             // inertial frame alternative orientation
  double fullinertia[6];           // non-axis-aligned inertia matrix

  // other
  mjtBool mocap;                   // is this a mocap body
  double gravcomp;                 // gravity compensation
  mjtSleepPolicy sleep;            // sleep policy
  mjtByte simple;                  // simple body optimization (0: false, 1: auto)
  mjDoubleVec* userdata;           // user data
  mjtBool explicitinertial;        // whether to save the body with explicit inertial clause
  mjsPlugin plugin;                // passive force plugin
  mjString* info;                  // message appended to compiler errors
} mjsBody;
typedef struct mjsFrame_ {         // frame specification
  mjsElement* element;             // element type
  mjString* childclass;            // childclass name
  double pos[3];                   // position
  double quat[4];                  // orientation
  mjsOrientation alt;              // alternative orientation
  mjString* info;                  // message appended to compiler errors
} mjsFrame;
typedef struct mjsJoint_ {         // joint specification
  mjsElement* element;             // element type
  mjtJoint type;                   // joint type

  // kinematics
  double pos[3];                   // anchor position
  double axis[3];                  // joint axis
  double ref;                      // value at reference configuration: qpos0
  mjtAlignFree align;              // align free joint with body com

  // stiffness
  double stiffness[mjNPOLY+1];     // stiffness coefficients
  double springref;                // spring reference value: qpos_spring
  double springdamper[2];          // timeconst, dampratio

  // limits
  mjtLimited limited;              // does joint have limits
  double range[2];                 // joint limits
  double margin;                   // margin value for joint limit detection
  mjtNum solref_limit[mjNREF];     // solver reference: joint limits
  mjtNum solimp_limit[mjNIMP];     // solver impedance: joint limits
  mjtLimited actfrclimited;        // are actuator forces on joint limited
  double actfrcrange[2];           // actuator force limits

  // dof properties
  double armature;                 // armature inertia (mass for slider)
  double damping[mjNPOLY+1];       // damping coefficients
  double frictionloss;             // friction loss
  mjtNum solref_friction[mjNREF];  // solver reference: dof friction
  mjtNum solimp_friction[mjNIMP];  // solver impedance: dof friction

  // other
  int group;                       // group
  mjtBool actgravcomp;             // is gravcomp force applied via actuators
  mjDoubleVec* userdata;           // user data
  mjString* info;                  // message appended to compiler errors
} mjsJoint;
typedef struct mjsGeom_ {          // geom specification
  mjsElement* element;             // element type
  mjtGeom type;                    // geom type

  // frame, size
  double pos[3];                   // position
  double quat[4];                  // orientation
  mjsOrientation alt;              // alternative orientation
  double fromto[6];                // alternative for capsule, cylinder, box, ellipsoid
  double size[3];                  // type-specific size

  // contact related
  int contype;                     // contact type
  int conaffinity;                 // contact affinity
  int condim;                      // contact dimensionality
  int priority;                    // contact priority
  double friction[3];              // one-sided friction coefficients: slide, roll, spin
  double solmix;                   // solver mixing for contact pairs
  mjtNum solref[mjNREF];           // solver reference
  mjtNum solimp[mjNIMP];           // solver impedance
  double margin;                   // margin for contact detection
  double gap;                      // additional contact detection buffer
  double surfacevel[6];            // surface velocity in local frame: linear, angular
  double adhesion;                 // adhesive force of contacts

  // inertia inference
  double mass;                     // used to compute density
  double density;                  // used to compute mass and inertia from volume or surface
  mjtGeomInertia typeinertia;      // selects between surface and volume inertia

  // fluid forces
  mjtNum fluid_ellipsoid;          // whether ellipsoid-fluid model is active
  mjtNum fluid_coefs[5];           // ellipsoid-fluid interaction coefs

  // visual
  mjString* material;              // name of material
  float rgba[4];                   // rgba when material is omitted
  int group;                       // group

  // other
  mjString* hfieldname;            // heightfield attached to geom
  mjString* meshname;              // mesh attached to geom
  double fitscale;                 // scale mesh uniformly
  mjDoubleVec* userdata;           // user data
  mjsPlugin plugin;                // sdf plugin
  mjString* info;                  // message appended to compiler errors
} mjsGeom;
typedef struct mjsSite_ {          // site specification
  mjsElement* element;             // element type

  // frame, size
  double pos[3];                   // position
  double quat[4];                  // orientation
  mjsOrientation alt;              // alternative orientation
  double fromto[6];                // alternative for capsule, cylinder, box, ellipsoid
  double size[3];                  // geom size

  // visual
  mjtGeom type;                    // geom type
  mjString* material;              // name of material
  int group;                       // group
  float rgba[4];                   // rgba when material is omitted

  // other
  mjString* meshname;              // mesh attached to site
  mjDoubleVec* userdata;           // user data
  mjString* info;                  // message appended to compiler errors
} mjsSite;
typedef struct mjsCamera_ {        // camera specification
  mjsElement* element;             // element type

  // extrinsics
  double pos[3];                   // position
  double quat[4];                  // orientation
  mjsOrientation alt;              // alternative orientation
  mjtCamLight mode;                // tracking mode
  mjString* targetbody;            // target body for tracking/targeting

  // intrinsics
  mjtProjection proj;              // camera projection type
  int resolution[2];               // resolution (pixel)
  int output;                      // bit flags for output type
  double fovy;                     // y-field of view
  double ipd;                      // inter-pupillary distance
  float intrinsic[4];              // camera intrinsics (length)
  float sensor_size[2];            // sensor size (length)
  float focal_length[2];           // focal length (length)
  float focal_pixel[2];            // focal length (pixel)
  float principal_length[2];       // principal point (length)
  float principal_pixel[2];        // principal point (pixel)

  // other
  mjDoubleVec* userdata;           // user data
  mjString* info;                  // message appended to compiler errors
} mjsCamera;
typedef struct mjsLight_ {         // light specification
  mjsElement* element;             // element type

  // frame
  double pos[3];                   // position
  double dir[3];                   // direction
  mjtCamLight mode;                // tracking mode
  mjString* targetbody;            // target body for targeting

  // intrinsics
  mjtBool active;                  // is light active
  mjtLightType type;               // type of light
  mjString* texture;               // texture name for image lights
  mjtBool castshadow;              // does light cast shadows
  float bulbradius;                // bulb radius, for soft shadows
  float intensity;                 // intensity, in candelas
  float range;                     // range of effectiveness
  float attenuation[3];            // OpenGL attenuation (quadratic model)
  float cutoff;                    // OpenGL cutoff
  float softness;                  // spotlight edge softness
  float exponent;                  // OpenGL exponent
  float ambient[3];                // ambient color
  float diffuse[3];                // diffuse color
  float specular[3];               // specular color

  // other
  mjString* info;                  // message appended to compiler errors
} mjsLight;
typedef struct mjsFlex_ {          // flex specification
  mjsElement* element;             // element type

  // contact properties
  int contype;                     // contact type
  int conaffinity;                 // contact affinity
  int condim;                      // contact dimensionality
  int priority;                    // contact priority
  double friction[3];              // one-sided friction coefficients: slide, roll, spin
  double solmix;                   // solver mixing for contact pairs
  mjtNum solref[mjNREF];           // solver reference
  mjtNum solimp[mjNIMP];           // solver impedance
  double margin;                   // margin for contact detection
  double gap;                      // additional contact detection buffer

  // other properties
  int dim;                         // element dimensionality
  double radius;                   // radius around primitive element
  double size[3];                  // vertex bounding box half sizes in qpos0
  mjtBool flatskin;                // render flex skin with flat shading
  mjtFlexSelf selfcollide;         // mode for flex self collision
  int passive;                     // mode for passive collisions
  int activelayers;                // number of active element layers in 3D
  int group;                       // group for visualization
  double edgestiffness;            // edge stiffness
  double edgedamping;              // edge damping
  float rgba[4];                   // rgba when material is omitted
  mjString* material;              // name of material used for rendering
  double young;                    // Young's modulus
  double poisson;                  // Poisson's ratio
  double damping;                  // Rayleigh's damping
  double thickness;                // thickness (2D only)
  int elastic2d;                   // 2D passive forces; 0: none, 1: bending, 2: stretching, 3: both
  int elastic3d;  // experimental 3D material (mjSpec only); 0: Saint
                  // Venant-Kirchhoff, 1: Stable Neo-Hookean
  int cellcount[3];                // grid cell count for finite cell method
  int order;                       // interpolation order (1: trilinear, 2: quadratic)

  // mesh properties
  mjStringVec* nodebody;           // node body names
  mjStringVec* vertbody;           // vertex body names
  mjDoubleVec* node;               // node positions
  mjDoubleVec* vert;               // vertex positions
  mjIntVec* elem;                  // element vertex ids
  mjFloatVec* texcoord;            // vertex texture coordinates
  mjIntVec* elemtexcoord;          // element texture coordinates

  // other
  mjString* info;                  // message appended to compiler errors
} mjsFlex;
typedef struct mjsMesh_ {          // mesh specification
  mjsElement* element;             // element type
  mjString* content_type;          // content type of file
  mjString* file;                  // mesh file
  double refpos[3];                // reference position
  double refquat[4];               // reference orientation
  double scale[3];                 // rescale mesh
  mjtMeshInertia inertia;          // inertia type (convex, legacy, exact, shell)
  mjtBool smoothnormal;            // do not exclude large-angle faces from normals
  mjtBool needsdf;                 // compute sdf from mesh
  int maxhullvert;                 // maximum vertex count for the convex hull
  mjFloatVec* uservert;            // user vertex data
  mjFloatVec* usernormal;          // user normal data
  mjFloatVec* usertexcoord;        // user texcoord data
  mjIntVec* userface;              // user vertex indices
  mjIntVec* userfacenormal;        // user face normal indices
  mjIntVec* userfacetexcoord;      // user texcoord indices
  mjsPlugin plugin;                // sdf plugin
  mjString* material;              // name of material
  int octree_maxdepth;             // max octree depth
  mjString* info;                  // message appended to compiler errors
} mjsMesh;
typedef struct mjsHField_ {        // height field specification
  mjsElement* element;             // element type
  mjString* content_type;          // content type of file
  mjString* file;                  // file: (nrow, ncol, [elevation data])
  double size[4];                  // hfield size (ignore referencing geom size)
  int nrow;                        // number of rows
  int ncol;                        // number of columns
  mjFloatVec* userdata;            // user-provided elevation data
  mjString* info;                  // message appended to compiler errors
} mjsHField;
typedef struct mjsSkin_ {          // skin specification
  mjsElement* element;             // element type
  mjString* file;                  // skin file
  mjString* material;              // name of material used for rendering
  float rgba[4];                   // rgba when material is omitted
  float inflate;                   // inflate in normal direction
  int group;                       // group for visualization

  // mesh
  mjFloatVec* vert;                // vertex positions
  mjFloatVec* texcoord;            // texture coordinates
  mjIntVec* face;                  // faces

  // skin
  mjStringVec* bodyname;           // body names
  mjFloatVec* bindpos;             // bind pos
  mjFloatVec* bindquat;            // bind quat
  mjIntVecVec* vertid;             // vertex ids
  mjFloatVecVec* vertweight;       // vertex weights

  // other
  mjString* info;                  // message appended to compiler errors
} mjsSkin;
typedef struct mjsTexture_ {       // texture specification
  mjsElement* element;             // element type
  mjtTexture type;                 // texture type
  mjtColorSpace colorspace;        // colorspace

  // method 1: builtin
  mjtBuiltin builtin;              // builtin type
  mjtMark mark;                    // mark type
  double rgb1[3];                  // first color for builtin
  double rgb2[3];                  // second color for builtin
  double markrgb[3];               // mark color
  double random;                   // probability of random dots
  int height;                      // height in pixels (square for cube and skybox)
  int width;                       // width in pixels
  int nchannel;                    // number of channels

  // method 2: single file
  mjString* content_type;          // content type of file
  mjString* file;                  // png file to load; use for all sides of cube
  int gridsize[2];                 // size of grid for composite file; (1,1)-repeat
  char gridlayout[12];             // row-major: L,R,F,B,U,D for faces; . for unused

  // method 3: separate files
  mjStringVec* cubefiles;          // different file for each side of the cube

  // method 4: from buffer read by user
  mjByteVec* data;                  // texture data

  // flip options
  mjtBool hflip;                   // horizontal flip
  mjtBool vflip;                   // vertical flip

  // other
  mjString* info;                  // message appended to compiler errors
} mjsTexture;
typedef struct mjsMaterial_ {      // material specification
  mjsElement* element;             // element type
  mjStringVec* textures;           // names of textures (empty: none)
  mjtBool texuniform;              // make texture cube uniform
  float texrepeat[2];              // texture repetition for 2D mapping
  float emission;                  // emission
  float specular;                  // specular
  float shininess;                 // shininess
  float reflectance;               // reflectance
  float metallic;                  // metallic
  float roughness;                 // roughness
  float rgba[4];                   // rgba
  mjString* info;                  // message appended to compiler errors
} mjsMaterial;
typedef struct mjsPair_ {          // pair specification
  mjsElement* element;             // element type
  mjString* geomname1;             // name of geom 1
  mjString* geomname2;             // name of geom 2

  // optional parameters: computed from geoms if not set by user
  int condim;                      // contact dimensionality
  mjtNum solref[mjNREF];           // solver reference, normal direction
  mjtNum solreffriction[mjNREF];   // solver reference, frictional directions
  mjtNum solimp[mjNIMP];           // solver impedance
  double margin;                   // margin for contact detection
  double gap;                      // additional contact detection buffer
  double adhesion;                 // adhesive force of contacts
  double friction[5];              // full contact friction
  mjString* info;                  // message appended to errors
} mjsPair;
typedef struct mjsExclude_ {       // exclude specification
  mjsElement* element;             // element type
  mjString* bodyname1;             // name of geom 1
  mjString* bodyname2;             // name of geom 2
  mjString* info;                  // message appended to errors
} mjsExclude;
typedef struct mjsEquality_ {      // equality specification
  mjsElement* element;             // element type
  mjtEq type;                      // constraint type
  double data[mjNEQDATA];          // type-dependent data
  mjtBool active;                  // is equality initially active
  mjString* name1;                 // name of object 1
  mjString* name2;                 // name of object 2
  mjtObj objtype;                  // type of both objects
  mjtNum solref[mjNREF];           // solver reference
  mjtNum solimp[mjNIMP];           // solver impedance
  mjString* info;                  // message appended to errors
} mjsEquality;
typedef struct mjsTendon_ {        // tendon specification
  mjsElement* element;             // element type

  // stiffness, damping, friction, armature
  double stiffness[mjNPOLY+1];     // stiffness coefficients
  double springlength[2];          // spring resting length; {-1, -1}: use qpos_spring
  double damping[mjNPOLY+1];       // damping coefficients
  double frictionloss;             // friction loss
  mjtNum solref_friction[mjNREF];  // solver reference: tendon friction
  mjtNum solimp_friction[mjNIMP];  // solver impedance: tendon friction
  double armature;                 // inertia associated with tendon velocity

  // length range
  mjtLimited limited;              // does tendon have limits
  mjtLimited actfrclimited;        // does tendon have actuator force limits
  double range[2];                 // length limits
  double actfrcrange[2];           // actuator force limits
  double margin;                   // margin value for tendon limit detection
  mjtNum solref_limit[mjNREF];     // solver reference: tendon limits
  mjtNum solimp_limit[mjNIMP];     // solver impedance: tendon limits

  // visual
  mjString* material;              // name of material for rendering
  double width;                    // width for rendering
  float rgba[4];                   // rgba when material is omitted
  int group;                       // group

  // other
  mjDoubleVec* userdata;           // user data
  mjString* info;                  // message appended to errors
} mjsTendon;
typedef struct mjsWrap_ {          // wrapping object specification
  mjsElement* element;             // element type
  mjtWrap type;                    // wrap type
  mjString* info;                  // message appended to errors
} mjsWrap;
typedef struct mjsActuator_ {      // actuator specification
  mjsElement* element;             // element type

  // gain, bias
  mjtGain gaintype;                // gain type
  double gainprm[mjNGAIN];         // gain parameters
  mjtBias biastype;                // bias type
  double biasprm[mjNBIAS];         // bias parameters

  // activation state
  mjtDyn dyntype;                  // dynamics type
  double dynprm[mjNDYN];           // dynamics parameters
  int actdim;                      // number of activation variables
  int ctrlspec;                    // input signature, scoped by gaintype; 0: type default
  double velrange[2];              // range of the velocity-setpoint input (pid)
  double ffrange[2];               // range of the feedforward input (pid)
  mjtBool actearly;                // apply next activations to qfrc

  // transmission
  mjtTrn trntype;                  // transmission type
  double gear[6];                  // length and transmitted force scaling
  mjString* target;                // name of transmission target
  mjString* refsite;               // reference site, for site transmission
  mjString* slidersite;            // site defining cylinder, for slider-crank
  double cranklength;              // crank length, for slider-crank
  double lengthrange[2];           // transmission length range
  double inheritrange;             // automatic range setting for position and intvelocity
  double damping[mjNPOLY+1];       // damping coefficients
  double armature;                 // armature inertia

  // input/output clamping
  mjtLimited ctrllimited;          // are control limits defined
  double ctrlrange[2];             // control range
  mjtLimited forcelimited;         // are force limits defined
  double forcerange[2];            // force range
  mjtLimited actlimited;           // are activation limits defined
  double actrange[2];              // activation range

  // other
  int group;                       // group
  int nsample;                     // number of samples in history buffer
  int interp;                      // interpolation order (0=ZOH, 1=linear, 2=cubic)
  double delay;                    // delay time in seconds; 0: no delay
  mjDoubleVec* userdata;           // user data
  mjsPlugin plugin;                // actuator plugin
  mjString* info;                  // message appended to compiler errors
} mjsActuator;
typedef struct mjsSensor_ {        // sensor specification
  mjsElement* element;             // element type

  // sensor definition
  mjtSensor type;                  // type of sensor
  mjtObj objtype;                  // type of sensorized object
  mjString* objname;               // name of sensorized object
  mjtObj reftype;                  // type of referenced object
  mjString* refname;               // name of referenced object
  int intprm[mjNSENS];             // integer parameters

  // user-defined sensors
  mjtDataType datatype;            // data type for sensor measurement
  mjtStage needstage;              // compute stage needed to simulate sensor
  int dim;                         // number of scalar outputs

  // output post-processing
  double cutoff;                   // cutoff for real and positive datatypes
  double noise;                    // noise stdev

  // history buffer
  int nsample;                     // number of samples in history buffer
  int interp;                      // interpolation order (0=ZOH, 1=linear, 2=cubic)
  double delay;                    // delay time in seconds
  double interval[2];              // [period, time_prev] in seconds

  // other
  mjDoubleVec* userdata;           // user data
  mjsPlugin plugin;                // sensor plugin
  mjString* info;                  // message appended to compiler errors
} mjsSensor;
typedef struct mjsNumeric_ {       // custom numeric field specification
  mjsElement* element;             // element type
  mjDoubleVec* data;               // initialization data
  int size;                        // array size, can be bigger than data size
  mjString* info;                  // message appended to compiler errors
} mjsNumeric;
typedef struct mjsText_ {          // custom text specification
  mjsElement* element;             // element type
  mjString* data;                  // text string
  mjString* info;                  // message appended to compiler errors
} mjsText;
typedef struct mjsTuple_ {         // tuple specification
  mjsElement* element;             // element type
  mjIntVec* objtype;               // object types
  mjStringVec* objname;            // object names
  mjDoubleVec* objprm;             // object parameters
  mjString* info;                  // message appended to compiler errors
} mjsTuple;
typedef struct mjsKey_ {           // keyframe specification
  mjsElement* element;             // element type
  double time;                     // time
  mjDoubleVec* qpos;               // qpos
  mjDoubleVec* qvel;               // qvel
  mjDoubleVec* act;                // act
  mjDoubleVec* mpos;               // mocap pos
  mjDoubleVec* mquat;              // mocap quat
  mjDoubleVec* ctrl;               // ctrl
  mjString* info;                  // message appended to compiler errors
} mjsKey;
typedef struct mjsDefault_ {       // default specification
  mjsElement* element;             // element type
  mjsJoint* joint;                 // joint defaults
  mjsGeom* geom;                   // geom defaults
  mjsSite* site;                   // site defaults
  mjsCamera* camera;               // camera defaults
  mjsLight* light;                 // light defaults
  mjsFlex* flex;                   // flex defaults
  mjsMesh* mesh;                   // mesh defaults
  mjsMaterial* material;           // material defaults
  mjsPair* pair;                   // pair defaults
  mjsEquality* equality;           // equality defaults
  mjsTendon* tendon;               // tendon defaults
  mjsActuator* actuator;           // actuator defaults
} mjsDefault;
typedef enum mjtDisableBit {      // disable default feature bitflags
  mjDSBL_CONSTRAINT   = 1<<0,     // entire constraint solver
  mjDSBL_EQUALITY     = 1<<1,     // equality constraints
  mjDSBL_FRICTIONLOSS = 1<<2,     // joint and tendon frictionloss constraints
  mjDSBL_LIMIT        = 1<<3,     // joint and tendon limit constraints
  mjDSBL_CONTACT      = 1<<4,     // contact constraints
  mjDSBL_SPRING       = 1<<5,     // passive spring forces
  mjDSBL_DAMPER       = 1<<6,     // passive damping forces
  mjDSBL_GRAVITY      = 1<<7,     // gravitational forces
  mjDSBL_CLAMPCTRL    = 1<<8,     // clamp control to specified range
  mjDSBL_WARMSTART    = 1<<9,     // warmstart constraint solver
  mjDSBL_FILTERPARENT = 1<<10,    // remove collisions with parent body
  mjDSBL_ACTUATION    = 1<<11,    // apply actuation forces
  mjDSBL_REFSAFE      = 1<<12,    // integrator safety: make ref[0]>=2*timestep
  mjDSBL_SENSOR       = 1<<13,    // sensors
  mjDSBL_MIDPHASE     = 1<<14,    // mid-phase collision filtering
  mjDSBL_EULERDAMP    = 1<<15,    // implicit integration of joint damping in Euler integrator
  mjDSBL_AUTORESET    = 1<<16,    // automatic reset when numerical issues are detected
  mjDSBL_NATIVECCD    = 1<<17,    // native convex collision detection
  mjDSBL_ISLAND       = 1<<18,    // constraint island discovery
  mjDSBL_MULTICCD     = 1<<19,    // multiple CCD contact points

  mjNDISABLE          = 20        // number of disable flags
} mjtDisableBit;
typedef enum mjtEnableBit {       // enable optional feature bitflags
  mjENBL_OVERRIDE     = 1<<0,     // override contact parameters
  mjENBL_ENERGY       = 1<<1,     // energy computation
  mjENBL_FWDINV       = 1<<2,     // record solver statistics
  mjENBL_INVDISCRETE  = 1<<3,     // discrete-time inverse dynamics
  mjENBL_SLEEP        = 1<<4,     // sleeping
  mjENBL_DIAGEXACT    = 1<<5,     // exact diagonal of constraint inertia
  mjENBL_IPC          = 1<<6,     // IPC flex contact mode of the discrete integrator

  mjNENABLE           = 7         // number of enable flags
} mjtEnableBit;
typedef enum mjtJoint {           // type of degree of freedom
  mjJNT_FREE          = 0,        // global position and orientation (quat)       (7)
  mjJNT_BALL,                     // orientation (quat) relative to parent        (4)
  mjJNT_SLIDE,                    // sliding distance along body-fixed axis       (1)
  mjJNT_HINGE                     // rotation angle (rad) around body-fixed axis  (1)
} mjtJoint;
typedef enum mjtGeom {            // type of geometric shape
  // regular geom types
  mjGEOM_PLANE        = 0,        // plane
  mjGEOM_HFIELD,                  // height field
  mjGEOM_SPHERE,                  // sphere
  mjGEOM_CAPSULE,                 // capsule
  mjGEOM_ELLIPSOID,               // ellipsoid
  mjGEOM_CYLINDER,                // cylinder
  mjGEOM_BOX,                     // box
  mjGEOM_MESH,                    // mesh
  mjGEOM_SDF,                     // signed distance field

  mjNGEOMTYPES,                   // number of regular geom types

  // rendering-only geom types: not used in mjModel, not counted in mjNGEOMTYPES
  mjGEOM_ARROW        = 100,      // arrow
  mjGEOM_ARROW1,                  // arrow without wedges
  mjGEOM_ARROW2,                  // arrow in both directions
  mjGEOM_LINE,                    // line
  mjGEOM_LINEBOX,                 // box with line edges
  mjGEOM_FLEX,                    // flex
  mjGEOM_SKIN,                    // skin
  mjGEOM_LABEL,                   // text label
  mjGEOM_TRIANGLE,                // triangle

  mjGEOM_NONE         = 1001      // missing geom type
} mjtGeom;
typedef enum mjtProjection {      // type of camera projection
  mjPROJ_PERSPECTIVE  = 0,        // perspective
  mjPROJ_ORTHOGRAPHIC             // orthographic
} mjtProjection;
typedef enum mjtCamLight {        // tracking mode for camera and light
  mjCAMLIGHT_FIXED    = 0,        // pos and rot fixed in body
  mjCAMLIGHT_TRACK,               // pos tracks body, rot fixed in global
  mjCAMLIGHT_TRACKCOM,            // pos tracks subtree com, rot fixed in body
  mjCAMLIGHT_TARGETBODY,          // pos fixed in body, rot tracks target body
  mjCAMLIGHT_TARGETBODYCOM        // pos fixed in body, rot tracks target subtree com
} mjtCamLight;
typedef enum mjtLightType {       // type of light
  mjLIGHT_SPOT        = 0,        // spot
  mjLIGHT_DIRECTIONAL,            // directional
  mjLIGHT_POINT,                  // point
  mjLIGHT_IMAGE,                  // image-based
} mjtLightType;
typedef enum mjtTexture {         // type of texture
  mjTEXTURE_2D        = 0,        // 2d texture, suitable for planes and hfields
  mjTEXTURE_CUBE,                 // cube texture, suitable for all other geom types
  mjTEXTURE_SKYBOX                // cube texture used as skybox
} mjtTexture;
typedef enum mjtTextureRole {     // role of texture map in rendering
  mjTEXROLE_USER      = 0,        // unspecified
  mjTEXROLE_RGB,                  // base color (albedo)
  mjTEXROLE_OCCLUSION,            // ambient occlusion
  mjTEXROLE_ROUGHNESS,            // roughness
  mjTEXROLE_METALLIC,             // metallic
  mjTEXROLE_NORMAL,               // normal (bump) map
  mjTEXROLE_OPACITY,              // opacity
  mjTEXROLE_EMISSIVE,             // light emission
  mjTEXROLE_RGBA,                 // base color, opacity
  mjTEXROLE_ORM,                  // occlusion, roughness, metallic
  mjNTEXROLE
} mjtTextureRole;
typedef enum mjtColorSpace {      // type of color space encoding
  mjCOLORSPACE_AUTO   = 0,        // attempts to autodetect color space, defaults to linear
  mjCOLORSPACE_LINEAR,            // linear color space
  mjCOLORSPACE_SRGB               // standard RGB color space
} mjtColorSpace;
typedef enum mjtIntegrator {      // integrator mode
  mjINT_EULER         = 0,        // semi-implicit Euler
  mjINT_RK4,                      // 4th-order Runge Kutta
  mjINT_IMPLICIT,                 // implicit in velocity
  mjINT_IMPLICITFAST,             // implicit in velocity, no rne derivative
  mjINT_DISCRETE                  // discrete step map: constraint solve in the effective metric
} mjtIntegrator;
typedef enum mjtCone {            // type of friction cone
  mjCONE_PYRAMIDAL     = 0,       // pyramidal
  mjCONE_ELLIPTIC                 // elliptic
} mjtCone;
typedef enum mjtJacobian {        // type of constraint Jacobian
  mjJAC_DENSE          = 0,       // dense
  mjJAC_SPARSE,                   // sparse
  mjJAC_AUTO                      // dense if nv<60, sparse otherwise
} mjtJacobian;
typedef enum mjtSolver {          // constraint solver algorithm
  mjSOL_PGS            = 0,       // PGS    (dual)
  mjSOL_CG,                       // CG     (primal)
  mjSOL_NEWTON                    // Newton (primal)
} mjtSolver;
typedef enum mjtEq {              // type of equality constraint
  mjEQ_CONNECT        = 0,        // connect two bodies at a point (ball joint)
  mjEQ_WELD,                      // fix relative position and orientation of two bodies
  mjEQ_JOINT,                     // couple the values of two scalar joints with cubic
  mjEQ_TENDON,                    // couple the lengths of two tendons with cubic
  mjEQ_FLEX,                      // fix all edge lengths of a flex
  mjEQ_FLEXVERT,                  // fix all vertex lengths of a flex
  mjEQ_FLEXSTRAIN,                // constrain strain of a trilinear/quadratic flex (B-bar)
  mjEQ_DISTANCE                   // unsupported, will cause an error if used
} mjtEq;
typedef enum mjtWrap {            // type of tendon wrap object
  mjWRAP_NONE         = 0,        // null object
  mjWRAP_JOINT,                   // constant moment arm
  mjWRAP_PULLEY,                  // pulley used to split tendon
  mjWRAP_SITE,                    // pass through site
  mjWRAP_SPHERE,                  // wrap around sphere
  mjWRAP_CYLINDER                 // wrap around (infinite) cylinder
} mjtWrap;
typedef enum mjtTrn {             // type of actuator transmission
  mjTRN_JOINT         = 0,        // force on joint
  mjTRN_JOINTINPARENT,            // force on joint, expressed in parent frame
  mjTRN_SLIDERCRANK,              // force via slider-crank linkage
  mjTRN_TENDON,                   // force on tendon
  mjTRN_SITE,                     // force on site
  mjTRN_BODY,                     // adhesion force on a body's geoms
  mjTRN_SO3,                      // torque on a relative orientation (3 force outputs)

  mjTRN_UNDEFINED     = 1000      // undefined transmission type
} mjtTrn;
typedef enum mjtDyn {             // type of actuator dynamics
  mjDYN_NONE          = 0,        // no internal dynamics; ctrl specifies force
  mjDYN_INTEGRATOR,               // integrator: da/dt = u
  mjDYN_FILTER,                   // linear filter: da/dt = (u-a) / tau
  mjDYN_FILTEREXACT,              // linear filter: da/dt = (u-a) / tau, with exact integration
  mjDYN_MUSCLE,                   // piecewise linear filter with two time constants
  mjDYN_DCMOTOR,                  // DC motor electrical dynamics
  mjDYN_PID,                      // PID controller states: slew, integral
  mjDYN_USER                      // user-defined dynamics type
} mjtDyn;
typedef enum mjtGain {            // type of actuator gain
  mjGAIN_FIXED        = 0,        // fixed gain
  mjGAIN_AFFINE,                  // const + kp*length + kv*velocity
  mjGAIN_MUSCLE,                  // muscle FLV curve computed by mju_muscleGain()
  mjGAIN_DCMOTOR,                 // DC motor gain: K or K/R
  mjGAIN_SO3,                     // geodesic servo on an SO3 transmission: force = kp * log(error)
  mjGAIN_PID,                     // PID controller: position and velocity setpoint inputs
  mjGAIN_USER                     // user-defined gain type
} mjtGain;
typedef enum mjtBias {            // type of actuator bias
  mjBIAS_NONE         = 0,        // no bias
  mjBIAS_AFFINE,                  // const + kp*length + kv*velocity
  mjBIAS_MUSCLE,                  // muscle passive force computed by mju_muscleBias()
  mjBIAS_DCMOTOR,                 // DC motor bias: back-EMF, cogging, LuGre friction
  mjBIAS_SO3,                     // damping term of the SO3 geodesic servo
  mjBIAS_USER                     // user-defined bias type
} mjtBias;
typedef enum mjtCtrlChart {       // so3 input signature (actuator_ctrlspec): orientation chart
  mjCHART_EXPMAP      = 1,        // exponential-map orientation target: 3 controls
  mjCHART_QUAT        = 2         // quaternion orientation target: 4 controls
} mjtCtrlChart;
typedef enum mjtCtrlInput {       // servo input signature (actuator_ctrlspec): present-input bits
  mjINPUT_POS         = 1,        // position setpoint input
  mjINPUT_VEL         = 2,        // velocity setpoint input
  mjINPUT_FF          = 4,        // feedforward input, in the actuator's output space
  mjINPUT_VOLTAGE     = 8,        // raw terminal voltage input (dcmotor)
  mjINPUT_NONE        = 16        // explicitly no inputs: purely passive (dcmotor)
} mjtCtrlInput;
typedef enum mjtObj {             // type of MujoCo object
  mjOBJ_UNKNOWN       = 0,        // unknown object type
  mjOBJ_BODY,                     // body
  mjOBJ_XBODY,                    // body, used to access regular frame instead of i-frame
  mjOBJ_JOINT,                    // joint
  mjOBJ_DOF,                      // dof
  mjOBJ_GEOM,                     // geom
  mjOBJ_SITE,                     // site
  mjOBJ_CAMERA,                   // camera
  mjOBJ_LIGHT,                    // light
  mjOBJ_FLEX,                     // flex
  mjOBJ_MESH,                     // mesh
  mjOBJ_SKIN,                     // skin
  mjOBJ_HFIELD,                   // heightfield
  mjOBJ_TEXTURE,                  // texture
  mjOBJ_MATERIAL,                 // material for rendering
  mjOBJ_PAIR,                     // geom pair to include
  mjOBJ_EXCLUDE,                  // body pair to exclude
  mjOBJ_EQUALITY,                 // equality constraint
  mjOBJ_TENDON,                   // tendon
  mjOBJ_ACTUATOR,                 // actuator
  mjOBJ_SENSOR,                   // sensor
  mjOBJ_NUMERIC,                  // numeric
  mjOBJ_TEXT,                     // text
  mjOBJ_TUPLE,                    // tuple
  mjOBJ_KEY,                      // keyframe
  mjOBJ_PLUGIN,                   // plugin instance

  mjNOBJECT,                      // number of object types

  // meta elements, do not appear in mjModel
  mjOBJ_FRAME         = 100,      // frame
  mjOBJ_DEFAULT,                  // default
  mjOBJ_MODEL                     // entire model
} mjtObj;
typedef enum mjtSensor {         // type of sensor
  // common robotic sensors, attached to a site
  mjSENS_TOUCH        = 0,        // scalar contact normal forces summed over sensor zone
  mjSENS_ACCELEROMETER,           // 3D linear acceleration, in local frame
  mjSENS_VELOCIMETER,             // 3D linear velocity, in local frame
  mjSENS_GYRO,                    // 3D angular velocity, in local frame
  mjSENS_FORCE,                   // 3D force between site's body and its parent body
  mjSENS_TORQUE,                  // 3D torque between site's body and its parent body
  mjSENS_MAGNETOMETER,            // 3D magnetometer
  mjSENS_RANGEFINDER,             // scalar distance to nearest geom along z-axis
  mjSENS_CAMPROJECTION,           // pixel coordinates of a site in the camera image

  // sensors related to scalar joints, tendons, actuators
  mjSENS_JOINTPOS,                // scalar joint position (hinge and slide only)
  mjSENS_JOINTVEL,                // scalar joint velocity (hinge and slide only)
  mjSENS_TENDONPOS,               // scalar tendon position
  mjSENS_TENDONVEL,               // scalar tendon velocity
  mjSENS_ACTUATORPOS,             // scalar actuator position
  mjSENS_ACTUATORVEL,             // scalar actuator velocity
  mjSENS_ACTUATORFRC,             // scalar actuator force
  mjSENS_JOINTACTFRC,             // scalar actuator force, measured at the joint
  mjSENS_TENDONACTFRC,            // scalar actuator force, measured at the tendon

  // sensors related to ball joints
  mjSENS_BALLQUAT,                // 4D ball joint quaternion
  mjSENS_BALLANGVEL,              // 3D ball joint angular velocity

  // joint and tendon limit sensors, in constraint space
  mjSENS_JOINTLIMITPOS,           // joint limit distance-margin
  mjSENS_JOINTLIMITVEL,           // joint limit velocity
  mjSENS_JOINTLIMITFRC,           // joint limit force
  mjSENS_TENDONLIMITPOS,          // tendon limit distance-margin
  mjSENS_TENDONLIMITVEL,          // tendon limit velocity
  mjSENS_TENDONLIMITFRC,          // tendon limit force

  // sensors attached to an object with spatial frame: (x)body, geom, site, camera
  mjSENS_FRAMEPOS,                // 3D position
  mjSENS_FRAMEQUAT,               // 4D unit quaternion orientation
  mjSENS_FRAMEXAXIS,              // 3D unit vector: x-axis of object's frame
  mjSENS_FRAMEYAXIS,              // 3D unit vector: y-axis of object's frame
  mjSENS_FRAMEZAXIS,              // 3D unit vector: z-axis of object's frame
  mjSENS_FRAMELINVEL,             // 3D linear velocity
  mjSENS_FRAMEANGVEL,             // 3D angular velocity
  mjSENS_FRAMELINACC,             // 3D linear acceleration
  mjSENS_FRAMEANGACC,             // 3D angular acceleration

  // sensors related to kinematic subtrees; attached to a body (which is the subtree root)
  mjSENS_SUBTREECOM,              // 3D center of mass of subtree
  mjSENS_SUBTREELINVEL,           // 3D linear velocity of subtree
  mjSENS_SUBTREEANGMOM,           // 3D angular momentum of subtree

  // sensors of geometric relationships
  mjSENS_INSIDESITE,              // 1 if object is inside a site, 0 otherwise
  mjSENS_GEOMDIST,                // signed distance between two geoms
  mjSENS_GEOMNORMAL,              // normal direction between two geoms
  mjSENS_GEOMFROMTO,              // segment between two geoms

  // sensors for reporting contacts which occurred during the simulation
  mjSENS_CONTACT,                 // contacts which occurred during the simulation

  // global sensors
  mjSENS_E_POTENTIAL,             // potential energy
  mjSENS_E_KINETIC,               // kinetic energy
  mjSENS_CLOCK,                   // simulation time

  // sensors related to SDFs
  mjSENS_TACTILE,                 // tactile sensor

  // plugin-controlled sensors
  mjSENS_PLUGIN,                  // plugin-controlled

  // user-defined sensor
  mjSENS_USER                     // sensor data provided by mjcb_sensor callback
} mjtSensor;
typedef enum mjtStage {           // computation stage
  mjSTAGE_NONE        = 0,        // no computations
  mjSTAGE_POS,                    // position-dependent computations
  mjSTAGE_VEL,                    // velocity-dependent computations
  mjSTAGE_ACC                     // acceleration/force-dependent computations
} mjtStage;
typedef enum mjtDataType {        // data type for sensors
  mjDATATYPE_REAL     = 0,        // real values, no constraints
  mjDATATYPE_POSITIVE,            // positive values; 0 or negative: inactive
  mjDATATYPE_AXIS,                // 3D unit vector
  mjDATATYPE_QUATERNION           // unit quaternion
} mjtDataType;
typedef enum mjtConDataField {    // data fields returned by contact sensors
  mjCONDATA_FOUND     = 0,        // whether a contact was found
  mjCONDATA_FORCE,                // contact force
  mjCONDATA_TORQUE,               // contact torque
  mjCONDATA_DIST,                 // contact penetration distance
  mjCONDATA_POS,                  // contact position
  mjCONDATA_NORMAL,               // contact frame normal
  mjCONDATA_TANGENT,              // contact frame first tangent

  mjNCONDATA                      // number of contact sensor data fields
} mjtConDataField;
typedef enum mjtRayDataField {    // data fields returned by rangefinder sensors
  mjRAYDATA_DIST     = 0,         // distance from ray origin to nearest surface
  mjRAYDATA_DIR,                  // normalized ray direction
  mjRAYDATA_ORIGIN,               // ray origin
  mjRAYDATA_POINT,                // point at which ray intersects nearest surface
  mjRAYDATA_NORMAL,               // surface normal at intersection point
  mjRAYDATA_DEPTH,                // depth along z-axis

  mjNRAYDATA                      // number of rangefinder sensor data fields
} mjtRayDataField;
typedef enum mjtCamOutBit {       // camera output type bitflags
  mjCAMOUT_RGB        = 1<<0,     // RGB image
  mjCAMOUT_DEPTH      = 1<<1,     // depth image (distance from camera plane)
  mjCAMOUT_DIST       = 1<<2,     // distance image (distance from camera origin)
  mjCAMOUT_NORMAL     = 1<<3,     // normal image
  mjCAMOUT_SEG        = 1<<4,     // segmentation image

  mjNCAMOUT           = 5         // number of camera output types
} mjtCamOutBit;
typedef enum mjtSameFrame {       // frame alignment of bodies with their children
  mjSAMEFRAME_NONE    = 0,        // no alignment
  mjSAMEFRAME_BODY,               // frame is same as body frame
  mjSAMEFRAME_INERTIA,            // frame is same as inertial frame
  mjSAMEFRAME_BODYROT,            // frame orientation is same as body orientation
  mjSAMEFRAME_INERTIAROT          // frame orientation is same as inertia orientation
} mjtSameFrame;
typedef enum mjtSleepPolicy {     // per-tree sleep policy
  mjSLEEP_AUTO        = 0,        // compiler chooses sleep policy
  mjSLEEP_AUTO_NEVER,             // compiler sleep policy: never
  mjSLEEP_AUTO_ALLOWED,           // compiler sleep policy: allowed
  mjSLEEP_NEVER,                  // user sleep policy: never
  mjSLEEP_ALLOWED,                // user sleep policy: allowed
  mjSLEEP_INIT,                   // user sleep policy: initialized asleep
} mjtSleepPolicy;
typedef enum mjtLRMode {          // mode for actuator length range computation
  mjLRMODE_NONE       = 0,        // do not process any actuators
  mjLRMODE_MUSCLE,                // process muscle actuators
  mjLRMODE_MUSCLEUSER,            // process muscle and user actuators
  mjLRMODE_ALL                    // process all actuators
} mjtLRMode;
typedef enum mjtFlexSelf {        // mode for flex selfcollide
  mjFLEXSELF_NONE     = 0,        // no self-collisions
  mjFLEXSELF_NARROW,              // skip midphase, go directly to narrowphase
  mjFLEXSELF_BVH,                 // use BVH in midphase (if midphase enabled)
  mjFLEXSELF_SAP,                 // use SAP in midphase
  mjFLEXSELF_AUTO                 // choose between BVH and SAP automatically
} mjtFlexSelf;
typedef enum mjtSDFType {         // signed distance function (SDF) type
  mjSDFTYPE_SINGLE    = 0,        // single SDF
  mjSDFTYPE_INTERSECTION,         // max(A, B)
  mjSDFTYPE_MIDSURFACE,           // A - B
  mjSDFTYPE_COLLISION,            // A + B + abs(max(A, B))
} mjtSDFType;
typedef enum mjtState {             // state elements
  mjSTATE_TIME           = 1<<0,    // time
  mjSTATE_QPOS           = 1<<1,    // position
  mjSTATE_QVEL           = 1<<2,    // velocity
  mjSTATE_ACT            = 1<<3,    // actuator activation
  mjSTATE_HISTORY        = 1<<4,    // history buffers (control, sensor)
  mjSTATE_WARMSTART      = 1<<5,    // acceleration used for warmstart
  mjSTATE_CTRL           = 1<<6,    // control
  mjSTATE_QFRC_APPLIED   = 1<<7,    // applied generalized force
  mjSTATE_XFRC_APPLIED   = 1<<8,    // applied Cartesian force/torque
  mjSTATE_EQ_ACTIVE      = 1<<9,    // enable/disable constraints
  mjSTATE_MOCAP_POS      = 1<<10,   // positions of mocap bodies
  mjSTATE_MOCAP_QUAT     = 1<<11,   // orientations of mocap bodies
  mjSTATE_USERDATA       = 1<<12,   // user data
  mjSTATE_PLUGIN         = 1<<13,   // plugin state

  mjNSTATE               = 14,      // number of state elements

  // convenience values for commonly used state specifications
  mjSTATE_PHYSICS        = mjSTATE_QPOS | mjSTATE_QVEL | mjSTATE_ACT | mjSTATE_HISTORY,
  mjSTATE_FULLPHYSICS    = mjSTATE_TIME | mjSTATE_PHYSICS | mjSTATE_PLUGIN,
  mjSTATE_USER           = mjSTATE_CTRL | mjSTATE_QFRC_APPLIED | mjSTATE_XFRC_APPLIED |
                           mjSTATE_EQ_ACTIVE | mjSTATE_MOCAP_POS | mjSTATE_MOCAP_QUAT |
                           mjSTATE_USERDATA,
  mjSTATE_INTEGRATION    = mjSTATE_FULLPHYSICS | mjSTATE_USER | mjSTATE_WARMSTART
} mjtState;
typedef enum mjtConstraint {        // type of constraint
  mjCNSTR_EQUALITY       = 0,       // equality constraint
  mjCNSTR_FRICTION_DOF,             // dof friction
  mjCNSTR_FRICTION_TENDON,          // tendon friction
  mjCNSTR_LIMIT_JOINT,              // joint limit
  mjCNSTR_LIMIT_TENDON,             // tendon limit
  mjCNSTR_CONTACT_FRICTIONLESS,     // frictionless contact
  mjCNSTR_CONTACT_PYRAMIDAL,        // frictional contact, pyramidal friction cone
  mjCNSTR_CONTACT_ELLIPTIC          // frictional contact, elliptic friction cone
} mjtConstraint;
typedef enum mjtConstraintState {   // constraint state
  mjCNSTRSTATE_SATISFIED = 0,       // constraint satisfied, zero cost (limit, contact)
  mjCNSTRSTATE_QUADRATIC,           // quadratic cost (equality, friction, limit, contact)
  mjCNSTRSTATE_LINEARNEG,           // linear cost, negative side (friction)
  mjCNSTRSTATE_LINEARPOS,           // linear cost, positive side (friction)
  mjCNSTRSTATE_CONE                 // squared distance to cone cost (elliptic contact)
} mjtConstraintState;
typedef enum mjtWarning {           // warning types
  mjWARN_INERTIA         = 0,       // (near) singular inertia matrix
  mjWARN_CONTACTFULL,               // too many contacts in contact list
  mjWARN_CNSTRFULL,                 // too many constraints
  mjWARN_BADQPOS,                   // bad number in qpos
  mjWARN_BADQVEL,                   // bad number in qvel
  mjWARN_BADQACC,                   // bad number in qacc
  mjWARN_BADCTRL,                   // bad number in ctrl

  mjNWARNING                        // number of warnings
} mjtWarning;
typedef enum mjtTimer {             // internal timers
  // main api
  mjTIMER_STEP           = 0,       // step
  mjTIMER_FORWARD,                  // forward
  mjTIMER_INVERSE,                  // inverse

  // breakdown of step/forward
  mjTIMER_POSITION,                 // fwdPosition
  mjTIMER_VELOCITY,                 // fwdVelocity
  mjTIMER_ACTUATION,                // fwdActuation
  mjTIMER_CONSTRAINT,               // fwdConstraint
  mjTIMER_ADVANCE,                  // mj_Euler, mj_implicit

  // breakdown of fwdPosition
  mjTIMER_POS_KINEMATICS,           // kinematics, com, tendon, transmission
  mjTIMER_POS_INERTIA,              // inertia computations
  mjTIMER_POS_COLLISION,            // collision detection
  mjTIMER_POS_MAKE,                 // make constraints
  mjTIMER_POS_PROJECT,              // project constraints

  // breakdown of mj_collision
  mjTIMER_COL_BROAD,                // broadphase
  mjTIMER_COL_NARROW,               // narrowphase

  mjNTIMER                          // number of timers
} mjtTimer;
typedef enum mjtSleepState {        // sleep state of an object
  mjS_STATIC = -1,                  // object is static
  mjS_ASLEEP = 0,                   // object is asleep
  mjS_AWAKE  = 1                    // object is awake
} mjtSleepState;
typedef enum mjtLogLevel {        // log message severity
  mjLOG_DEBUG       = 0,          // internal engine debug trace (opt-in via topic filtering)
  mjLOG_INFO,                     // informational (opt-in via topic filtering)
  mjLOG_WARNING,                  // warning
  mjLOG_ERROR,                    // error
} mjtLogLevel;
typedef enum mjtLogTopic {        // log topic identifiers
  mjTOPIC_NONE     = 0,           // no topic (always passes filtering)
                                  // INFO topics:
  mjTOPIC_TIME_STP = 1,           // timing diagnostics (step)
  mjTOPIC_TIME_CMP = 2,           // timing diagnostics (compile)
                                  // DEBUG topics:
  mjTOPIC_SLEEP    = 3,           // sleep/wake events

  mjNTOPIC         = 3            // number of filterable topics
} mjtLogTopic;
typedef struct mjLogMessage_ {    // structured log message
  int level;                      // mjtLogLevel
  int topic;                      // mjtLogTopic (0 for error/warning/user)
  char subject[1024];             // message subject (one-liner, printf-formatted)
  const char* body;               // message body (multi-line detail, or NULL)
  const char* func;               // __func__ or NULL
  const char* file;               // __FILE__ or NULL
  int line;                       // __LINE__ or 0
  mjtBool timestamp;              // prepend timestamp to output
} mjLogMessage;
typedef struct mjLogConfig_ {     // log handler default configuration
  mjtBool logto_console;          // print to console (default: true)
  mjtBool logto_file;             // print to log file (default: true)
  char logfile[1024];             // log file path (default: "MUJOCO_LOG.TXT")
  int topics;                     // enabled info topic bitmask (default: 0)
} mjLogConfig;
typedef enum mjtButton {          // mouse button
  mjBUTTON_NONE = 0,              // no button
  mjBUTTON_LEFT,                  // left button
  mjBUTTON_RIGHT,                 // right button
  mjBUTTON_MIDDLE                 // middle button
} mjtButton;
typedef enum mjtEvent {           // mouse and keyboard event type
  mjEVENT_NONE = 0,               // no event
  mjEVENT_MOVE,                   // mouse move
  mjEVENT_PRESS,                  // mouse button press
  mjEVENT_RELEASE,                // mouse button release
  mjEVENT_SCROLL,                 // scroll
  mjEVENT_KEY,                    // key press
  mjEVENT_RESIZE,                 // resize
  mjEVENT_REDRAW,                 // redraw
  mjEVENT_FILESDROP               // files drop
} mjtEvent;
typedef enum mjtItem {            // UI item type
  mjITEM_END = -2,                // end of definition list (not an item)
  mjITEM_SECTION = -1,            // section (not an item)
  mjITEM_SEPARATOR = 0,           // separator
  mjITEM_STATIC,                  // static text
  mjITEM_BUTTON,                  // button

  // the rest have data pointer
  mjITEM_CHECKINT,                // check box, int value
  mjITEM_CHECKBYTE,               // check box, mjtByte value
  mjITEM_RADIO,                   // radio group
  mjITEM_RADIOLINE,               // radio group, single line
  mjITEM_SELECT,                  // selection box
  mjITEM_SLIDERINT,               // slider, int value
  mjITEM_SLIDERNUM,               // slider, mjtNum value
  mjITEM_EDITINT,                 // editable array, int values
  mjITEM_EDITNUM,                 // editable array, mjtNum values
  mjITEM_EDITFLOAT,               // editable array, float values
  mjITEM_EDITTXT,                 // editable text

  mjNITEM                         // number of item types
} mjtItem;
typedef enum mjtSection {         // UI section state
  mjSECT_CLOSED = 0,              // closed state (regular section)
  mjSECT_OPEN,                    // open state (regular section)
  mjSECT_FIXED                    // fixed section: always open, no title
} mjtSection;
typedef struct mjuiState_ {       // mouse and keyboard state
  // constants set by user
  int nrect;                      // number of rectangles used
  mjrRect rect[mjMAXUIRECT];      // rectangles (index 0: entire window)
  void* userdata;                 // pointer to user data (for callbacks)

  // event type
  int type;                       // (type mjtEvent)

  // mouse buttons
  int left;                       // is left button down
  int right;                      // is right button down
  int middle;                     // is middle button down
  int doubleclick;                // is last press a double click
  int button;                     // which button was pressed (mjtButton)
  double buttontime;              // time of last button press

  // mouse position
  double x;                       // x position
  double y;                       // y position
  double dx;                      // x displacement
  double dy;                      // y displacement
  double sx;                      // x scroll
  double sy;                      // y scroll

  // keyboard
  int control;                    // is control down
  int shift;                      // is shift down
  int alt;                        // is alt down
  int key;                        // which key was pressed
  double keytime;                 // time of last key press

  // rectangle ownership and dragging
  int mouserect;                  // which rectangle contains mouse
  int dragrect;                   // which rectangle is dragged with mouse
  int dragbutton;                 // which button started drag (mjtButton)

  // files dropping (only valid when type == mjEVENT_FILESDROP)
  int dropcount;                  // number of files dropped
  const char** droppaths;         // paths to files dropped
} mjuiState;
typedef struct mjuiThemeSpacing_ {  // UI visualization theme spacing
  int total;                        // total width
  int scroll;                       // scrollbar width
  int label;                        // label width
  int section;                      // section gap
  int cornersect;                   // corner radius for section
  int cornersep;                    // corner radius for separator
  int itemside;                     // item side gap
  int itemmid;                      // item middle gap
  int itemver;                      // item vertical gap
  int texthor;                      // text horizontal gap
  int textver;                      // text vertical gap
  int linescroll;                   // number of pixels to scroll
  int samples;                      // number of multisamples
} mjuiThemeSpacing;
typedef struct mjuiThemeColor_ {  // UI visualization theme color
  float master[3];                // master background
  float thumb[3];                 // scrollbar thumb
  float secttitle[3];             // section title
  float secttitle2[3];            // section title: bottom color
  float secttitleuncheck[3];      // section title with unchecked box
  float secttitleuncheck2[3];     // section title with unchecked box: bottom color
  float secttitlecheck[3];        // section title with checked box
  float secttitlecheck2[3];       // section title with checked box: bottom color
  float sectfont[3];              // section font
  float sectsymbol[3];            // section symbol
  float sectpane[3];              // section pane
  float separator[3];             // separator title
  float separator2[3];            // separator title: bottom color
  float shortcut[3];              // shortcut background
  float fontactive[3];            // font active
  float fontinactive[3];          // font inactive
  float decorinactive[3];         // decor inactive
  float decorinactive2[3];        // inactive slider color 2
  float button[3];                // button
  float check[3];                 // check
  float radio[3];                 // radio
  float select[3];                // select
  float select2[3];               // select pane
  float slider[3];                // slider
  float slider2[3];               // slider color 2
  float edit[3];                  // edit
  float edit2[3];                 // edit invalid
  float cursor[3];                // edit cursor
} mjuiThemeColor;
struct mjuiItemSingle_ {          // check and button-related
  int modifier;                   // 0: none, 1: control, 2: shift; 4: alt
  int shortcut;                   // shortcut key; 0: undefined
};


struct mjuiItemMulti_ {                  // static, radio and select-related
  int nelem;                             // number of elements in group
  char name[mjMAXUIMULTI][mjMAXUINAME];  // element names
};


struct mjuiItemSlider_ {          // slider-related
  double range[2];                // slider range
  double divisions;               // number of range divisions
};


struct mjuiItemEdit_ {            // edit-related
  int nelem;                      // number of elements in list
  double range[mjMAXUIEDIT][2];   // element range (min>=max: ignore)
};


typedef struct mjuiItem_ {        // UI item
  // common properties
  int type;                       // type (mjtItem)
  char name[mjMAXUINAME];         // name
  int state;                      // 0: disable, 1: enable, 2+: use predicate
  void *pdata;                    // data pointer (type-specific)
  int sectionid;                  // id of section containing item
  int itemid;                     // id of item within section
  int userid;                     // user-supplied id (for event handling)

  // type-specific properties
  union {
    struct mjuiItemSingle_ single;  // check and button
    struct mjuiItemMulti_ multi;    // static, radio and select
    struct mjuiItemSlider_ slider;  // slider
    struct mjuiItemEdit_ edit;      // edit
  };

  // internal
  mjrRect rect;                   // rectangle occupied by item
  int skip;                       // item skipped due to closed separator
} mjuiItem;
typedef struct mjuiSection_ {     // UI section
  // properties
  char name[mjMAXUINAME];         // name
  int state;                      // section state (mjtSection)
  int modifier;                   // 0: none, 1: control, 2: shift; 4: alt
  int shortcut;                   // shortcut key; 0: undefined
  int checkbox;                   // 0: none, 1: unchecked, 2: checked
  int nitem;                      // number of items in use
  mjuiItem item[mjMAXUIITEM];     // preallocated array of items

  // internal
  mjrRect rtitle;                 // rectangle occupied by title
  mjrRect rcontent;               // rectangle occupied by content
  int lastclick;                  // last mouse click over this section
} mjuiSection;
typedef struct mjUI_ {            // entire UI
  // constants set by user
  mjuiThemeSpacing spacing;       // UI theme spacing
  mjuiThemeColor color;           // UI theme color
  mjfItemEnable predicate;        // callback to set item state programmatically
  void* userdata;                 // pointer to user data (passed to predicate)
  int rectid;                     // index of this ui rectangle in mjuiState
  int auxid;                      // aux buffer index of this ui
  int radiocol;                   // number of radio columns (0 defaults to 2)

  // UI sizes (framebuffer units)
  int width;                      // width
  int height;                     // current height
  int maxheight;                  // height when all sections open
  int scroll;                     // scroll from top of UI

  // mouse focus and count
  int mousesect;                  // 0: none, -1: scroll, otherwise 1+section
  int mouseitem;                  // item within section
  int mousehelp;                  // help button down: print shortcuts
  int mouseclicks;                // number of mouse clicks over UI
  int mousesectcheck;             // 0: none, otherwise 1+section

  // keyboard focus and edit
  int editsect;                   // 0: none, otherwise 1+section
  int edititem;                   // item within section
  int editcursor;                 // cursor position
  int editscroll;                 // horizontal scroll
  char edittext[mjMAXUITEXT];     // current text
  mjuiItem* editchanged;          // pointer to changed edit in last mjui_event

  // sections
  int nsect;                      // number of sections in use
  mjuiSection sect[mjMAXUISECT];  // preallocated array of sections
} mjUI;
typedef struct mjuiDef_ {         // table passed to mjui_add()
  int type;                       // type (mjtItem); -1: section
  char name[mjMAXUINAME];         // name
  int state;                      // state
  void* pdata;                    // pointer to data
  char other[mjMAXUITEXT];        // string with type-specific properties
  int otherint;                   // int with type-specific properties
} mjuiDef;
typedef enum mjtCatBit_ {         // bitflags for mjvGeom category
  mjCAT_STATIC        = 1,        // model elements in body 0
  mjCAT_DYNAMIC       = 2,        // model elements in all other bodies
  mjCAT_DECOR         = 4,        // decorative geoms
  mjCAT_ALL           = 7         // select all categories
} mjtCatBit;
typedef enum mjtMouse_ {          // mouse interaction mode
  mjMOUSE_NONE        = 0,        // no action
  mjMOUSE_ROTATE_V,               // rotate (orbit) vertically
  mjMOUSE_ROTATE_H,               // rotate (orbit) horizontally
  mjMOUSE_MOVE_V,                 // move along vertical plane
  mjMOUSE_MOVE_H,                 // move along horizontal plane
  mjMOUSE_ZOOM,                   // zoom (towards/away from lookat point)
  mjMOUSE_MOVE_V_REL,             // move (truck, pedestal), vertical plane rel. to target
  mjMOUSE_MOVE_H_REL,             // move (truck, dolly), horizontal plane rel. to target
  mjMOUSE_TURN_V,                 // turn (tilt) vertically
  mjMOUSE_TURN_H,                 // turn (pan) horizontally
} mjtMouse;
typedef enum mjtPertBit_ {        // mouse perturbations
  mjPERT_TRANSLATE    = 1,        // translation
  mjPERT_ROTATE       = 2         // rotation
} mjtPertBit;
typedef enum mjtCamera_ {         // abstract camera type
  mjCAMERA_FREE       = 0,        // free camera
  mjCAMERA_TRACKING,              // tracking camera; uses trackbodyid
  mjCAMERA_FIXED,                 // fixed camera; uses fixedcamid
  mjCAMERA_USER                   // user is responsible for setting OpenGL camera
} mjtCamera;
typedef enum mjtLabel_ {          // object labeling
  mjLABEL_NONE        = 0,        // nothing
  mjLABEL_BODY,                   // body labels
  mjLABEL_JOINT,                  // joint labels
  mjLABEL_GEOM,                   // geom labels
  mjLABEL_SITE,                   // site labels
  mjLABEL_CAMERA,                 // camera labels
  mjLABEL_LIGHT,                  // light labels
  mjLABEL_TENDON,                 // tendon labels
  mjLABEL_ACTUATOR,               // actuator labels
  mjLABEL_CONSTRAINT,             // constraint labels
  mjLABEL_FLEX,                   // flex labels
  mjLABEL_SKIN,                   // skin labels
  mjLABEL_SELECTION,              // selected object
  mjLABEL_SELPNT,                 // coordinates of selection point
  mjLABEL_CONTACTPOINT,           // contact information
  mjLABEL_CONTACTFORCE,           // magnitude of contact force
  mjLABEL_ISLAND,                 // id of island

  mjNLABEL                        // number of label types
} mjtLabel;
typedef enum mjtFrame_ {          // frame visualization
  mjFRAME_NONE        = 0,        // no frames
  mjFRAME_BODY,                   // body frames
  mjFRAME_GEOM,                   // geom frames
  mjFRAME_SITE,                   // site frames
  mjFRAME_CAMERA,                 // camera frames
  mjFRAME_LIGHT,                  // light frames
  mjFRAME_CONTACT,                // contact frames
  mjFRAME_WORLD,                  // world frame

  mjNFRAME                        // number of visualization frames
} mjtFrame;
typedef enum mjtVisFlag_ {        // flags enabling model element visualization
  mjVIS_CONVEXHULL    = 0,        // mesh convex hull
  mjVIS_TEXTURE,                  // textures
  mjVIS_JOINT,                    // joints
  mjVIS_CAMERA,                   // cameras
  mjVIS_ACTUATOR,                 // actuators
  mjVIS_ACTIVATION,               // activations
  mjVIS_LIGHT,                    // lights
  mjVIS_TENDON,                   // tendons
  mjVIS_RANGEFINDER,              // rangefinder sensors
  mjVIS_CONSTRAINT,               // point constraints
  mjVIS_INERTIA,                  // equivalent inertia boxes
  mjVIS_SCLINERTIA,               // scale equivalent inertia boxes with mass
  mjVIS_PERTFORCE,                // perturbation force
  mjVIS_PERTOBJ,                  // perturbation object
  mjVIS_CONTACTPOINT,             // contact points
  mjVIS_ISLAND,                   // constraint islands
  mjVIS_CONTACTFORCE,             // contact force
  mjVIS_CONTACTSPLIT,             // split contact force into normal and tangent
  mjVIS_TRANSPARENT,              // make dynamic geoms more transparent
  mjVIS_AUTOCONNECT,              // auto connect joints and body coms
  mjVIS_COM,                      // center of mass
  mjVIS_SELECT,                   // selection point
  mjVIS_STATIC,                   // static bodies
  mjVIS_SKIN,                     // skin
  mjVIS_FLEXVERT,                 // flex vertices
  mjVIS_FLEXEDGE,                 // flex edges
  mjVIS_FLEXFACE,                 // flex element faces
  mjVIS_FLEXSKIN,                 // flex smooth skin (disables the rest)
  mjVIS_BODYBVH,                  // body bounding volume hierarchy
  mjVIS_MESHBVH,                  // mesh bounding volume hierarchy
  mjVIS_SDFITER,                  // iterations of SDF gradient descent

  mjNVISFLAG                      // number of visualization flags
} mjtVisFlag;
typedef enum mjtRndFlag_ {        // flags enabling rendering effects
  mjRND_SHADOW        = 0,        // shadows
  mjRND_WIREFRAME,                // wireframe
  mjRND_REFLECTION,               // reflections
  mjRND_ADDITIVE,                 // additive transparency
  mjRND_SKYBOX,                   // skybox
  mjRND_FOG,                      // fog
  mjRND_HAZE,                     // haze
  mjRND_DEPTH,                    // depth
  mjRND_SEGMENT,                  // segmentation with random color
  mjRND_IDCOLOR,                  // segmentation with segid+1 color
  mjRND_CULL_FACE,                // cull backward faces

  mjNRNDFLAG                      // number of rendering flags
} mjtRndFlag;
typedef enum mjtStereo_ {         // type of stereo rendering
  mjSTEREO_NONE       = 0,        // no stereo; use left eye only
  mjSTEREO_QUADBUFFERED,          // quad buffered; revert to side-by-side if no hardware support
  mjSTEREO_SIDEBYSIDE             // side-by-side
} mjtStereo;
typedef struct mjvPerturb_ {      // object selection and perturbation
  int      select;                // selected body id; non-positive: none
  int      flexselect;            // selected flex id; negative: none
  int      skinselect;            // selected skin id; negative: none
  int      active;                // perturbation bitmask (mjtPertBit)
  int      active2;               // secondary perturbation bitmask (mjtPertBit)
  mjtNum   refpos[3];             // reference position for selected object
  mjtNum   refquat[4];            // reference orientation for selected object
  mjtNum   refselpos[3];          // reference position for selection point
  mjtNum   localpos[3];           // selection point in object coordinates
  mjtNum   localmass;             // spatial inertia at selection point
  mjtNum   scale;                 // relative mouse motion-to-space scaling (set by initPerturb)
} mjvPerturb;
typedef struct mjvCamera_ {       // abstract camera
  // type and ids
  int      type;                  // camera type (mjtCamera)
  int      fixedcamid;            // fixed camera id
  int      trackbodyid;           // body id to track

  // abstract camera pose specification
  mjtNum   lookat[3];             // lookat point
  mjtNum   distance;              // distance to lookat point or tracked body
  mjtNum   azimuth;               // camera azimuth (deg)
  mjtNum   elevation;             // camera elevation (deg)

  // orthographic / perspective
  int      orthographic;          // 0: perspective; 1: orthographic
} mjvCamera;
typedef struct mjvGLCamera_ {     // OpenGL camera
  // camera frame
  float    pos[3];                // position
  float    forward[3];            // forward direction
  float    up[3];                 // up direction

  // camera projection
  float    frustum_center;        // hor. center (left,right set to match aspect)
  float    frustum_width;         // width (not used for rendering)
  float    frustum_bottom;        // bottom
  float    frustum_top;           // top
  float    frustum_near;          // near
  float    frustum_far;           // far

  // orthographic / perspective
  int      orthographic;          // 0: perspective; 1: orthographic
} mjvGLCamera;
typedef struct mjvGeom_ {         // abstract geom
  // type info
  int      type;                  // geom type (mjtGeom)
  int      dataid;                // mesh, hfield or plane id; -1: none; mesh: 2*id or 2*id+1 (hull)
  int      objtype;               // mujoco object type; mjOBJ_UNKNOWN for decor
  int      objid;                 // mujoco object id; -1 for decor
  int      category;              // visual category
  int      matid;                 // material id; -1: no textured material
  int      texid;                 // texture id; -1: none
  int      texuniform;            // uniform cube mapping
  int      texcoord;              // mesh or flex geom has texture coordinates
  int      segid;                 // segmentation id; -1: not shown

  // spatial transform
  float    size[3];               // size parameters
  float    pos[3];                // Cartesian position
  float    mat[9];                // Cartesian orientation

  // material properties
  float    rgba[4];               // color and transparency
  float    emission;              // emission coef
  float    specular;              // specular coef
  float    shininess;             // shininess coef
  float    reflectance;           // reflectance coef
  float    texrepeat[2];          // texture repetition for 2d mapping

  char     label[100];            // text label

  // transparency rendering (set internally)
  float    camdist;               // distance to camera (used by sorter)
  float    modelrbound;           // geom rbound from model, 0 if not model geom
  mjtByte  transparent;           // treat geom as transparent
} mjvGeom;
typedef struct mjvLight_ {        // OpenGL light
  int      id;                    // light id, -1 for headlight
  float    pos[3];                // position rel. to body frame
  float    dir[3];                // direction rel. to body frame
  int      type;                  // type (mjtLightType)
  int      texid;                 // texture id for image lights
  float    attenuation[3];        // OpenGL attenuation (quadratic model)
  float    cutoff;                // OpenGL cutoff
  float    exponent;              // OpenGL exponent
  float    ambient[3];            // ambient rgb (alpha=1)
  float    diffuse[3];            // diffuse rgb (alpha=1)
  float    specular[3];           // specular rgb (alpha=1)
  mjtByte  headlight;             // headlight
  mjtByte  castshadow;            // does light cast shadows
  float    bulbradius;            // bulb radius for soft shadows
  float    intensity;             // intensity, in candelas
  float    range;                 // range of effectiveness
  float    softness;              // spotlight edge softness
} mjvLight;
typedef struct mjvOption_ {          // abstract visualization options
  int      label;                    // what objects to label (mjtLabel)
  int      frame;                    // which frame to show (mjtFrame)
  mjtByte  geomgroup[mjNGROUP];      // geom visualization by group
  mjtByte  sitegroup[mjNGROUP];      // site visualization by group
  mjtByte  jointgroup[mjNGROUP];     // joint visualization by group
  mjtByte  tendongroup[mjNGROUP];    // tendon visualization by group
  mjtByte  actuatorgroup[mjNGROUP];  // actuator visualization by group
  mjtByte  flexgroup[mjNGROUP];      // flex visualization by group
  mjtByte  skingroup[mjNGROUP];      // skin visualization by group
  mjtByte  flags[mjNVISFLAG];        // visualization flags (indexed by mjtVisFlag)
  int      bvh_depth;                // depth of the bounding volume hierarchy to be visualized
  int      flex_layer;               // element layer to be visualized for 3D flex
} mjvOption;
typedef struct mjvScene_ {        // abstract scene passed to OpenGL renderer
  // abstract geoms
  int      maxgeom;               // size of allocated geom buffer
  int      ngeom;                 // number of geoms currently in buffer
  mjvGeom* geoms;                 // buffer for geoms (ngeom)
  int*     geomorder;             // buffer for ordering geoms by distance to camera (ngeom)

  // flex data
  int      nflex;                 // number of flexes
  int*     flexedgeadr;           // address of flex edges (nflex)
  int*     flexedgenum;           // number of edges in flex (nflex)
  int*     flexvertadr;           // address of flex vertices (nflex)
  int*     flexvertnum;           // number of vertices in flex (nflex)
  int*     flexfaceadr;           // address of flex faces (nflex)
  int*     flexfacenum;           // number of flex faces allocated (nflex)
  int*     flexfaceused;          // number of flex faces currently in use (nflex)
  int*     flexedge;              // flex edge data (2*nflexedge)
  float*   flexvert;              // flex vertices (3*nflexvert)
  float*   flexface;              // flex faces vertices (9*sum(flexfacenum))
  float*   flexnormal;            // flex face normals (9*sum(flexfacenum))
  float*   flextexcoord;          // flex face texture coordinates (6*sum(flexfacenum))
  mjtByte  flexvertopt;           // copy of mjVIS_FLEXVERT mjvOption flag
  mjtByte  flexedgeopt;           // copy of mjVIS_FLEXEDGE mjvOption flag
  mjtByte  flexfaceopt;           // copy of mjVIS_FLEXFACE mjvOption flag
  mjtByte  flexskinopt;           // copy of mjVIS_FLEXSKIN mjvOption flag

  // skin data
  int      nskin;                 // number of skins
  int*     skinfacenum;           // number of faces in skin (nskin)
  int*     skinvertadr;           // address of skin vertices (nskin)
  int*     skinvertnum;           // number of vertices in skin (nskin)
  float*   skinvert;              // skin vertex data (3*nskinvert)
  float*   skinnormal;            // skin normal data (3*nskinvert)

  // OpenGL lights
  int      nlight;                // number of lights currently in buffer
  mjvLight lights[mjMAXLIGHT];    // buffer for lights (nlight)

  // OpenGL cameras
  mjvGLCamera camera[2];          // left and right camera

  // OpenGL model transformation
  mjtByte  enabletransform;       // enable model transformation
  float    translate[3];          // model translation
  float    rotate[4];             // model quaternion rotation
  float    scale;                 // model scaling

  // OpenGL rendering effects
  int      stereo;                // stereoscopic rendering (mjtStereo)
  mjtByte  flags[mjNRNDFLAG];     // rendering flags (indexed by mjtRndFlag)

  // framing
  int      framewidth;            // frame pixel width; 0: disable framing
  float    framergb[3];           // frame color

  // geom buffer status
  int      status;                // 0: ok, 1: geoms exhausted, warning issued
} mjvScene;
typedef struct mjvFigure_ {       // abstract 2D figure passed to OpenGL renderer
  // enable flags
  int     flg_legend;             // show legend
  int     flg_ticklabel[2];       // show grid tick labels (x,y)
  int     flg_extend;             // automatically extend axis ranges to fit data
  int     flg_barplot;            // isolated line segments (i.e. GL_LINES)
  int     flg_selection;          // vertical selection line
  int     flg_symmetric;          // symmetric y-axis

  // style settings
  float   linewidth;              // line width
  float   gridwidth;              // grid line width
  int     gridsize[2];            // number of grid points in (x,y)
  float   gridrgb[3];             // grid line rgb
  float   figurergba[4];          // figure color and alpha
  float   panergba[4];            // pane color and alpha
  float   legendrgba[4];          // legend color and alpha
  float   textrgb[3];             // text color
  float   linergb[mjMAXLINE][3];  // line colors
  float   range[2][2];            // axis ranges; (min>=max) automatic
  char    xformat[20];            // x-tick label format for sprintf
  char    yformat[20];            // y-tick label format for sprintf
  char    minwidth[20];           // string used to determine min y-tick width

  // text labels
  char    title[1000];            // figure title; subplots separated with 2+ spaces
  char    xlabel[100];            // x-axis label
  char    linename[mjMAXLINE][100];  // line names for legend

  // dynamic settings
  int     legendoffset;           // number of lines to offset legend
  int     subplot;                // selected subplot (for title rendering)
  int     highlight[2];           // if point is in legend rect, highlight line
  int     highlightid;            // if id>=0 and no point, highlight id
  float   selection;              // selection line x-value

  // line data
  int     linepnt[mjMAXLINE];     // number of points in line; (0) disable
  float   linedata[mjMAXLINE][2*mjMAXLINEPNT];  // line data (x,y)

  // output from renderer
  int     xaxispixel[2];          // range of x-axis in pixels
  int     yaxispixel[2];          // range of y-axis in pixels
  float   xaxisdata[2];           // range of x-axis in data units
  float   yaxisdata[2];           // range of y-axis in data units
} mjvFigure;

//----------------------------- STRING CONSTANTS -------------------------------
const char* mjDISABLESTRING[mjNDISABLE] = {
  "Constraint",
  "Equality",
  "Frictionloss",
  "Limit",
  "Contact",
  "Spring",
  "Damper",
  "Gravity",
  "Clampctrl",
  "Warmstart",
  "Filterparent",
  "Actuation",
  "Refsafe",
  "Sensor",
  "Midphase",
  "Eulerdamp",
  "AutoReset",
  "NativeCCD",
  "Island",
  "MultiCCD"
};
const char* mjENABLESTRING[mjNENABLE] = {
  "Override",
  "Energy",
  "Fwdinv",
  "InvDiscrete",
  "Sleep",
  "DiagExact",
  "IPC"
};
const char* mjTIMERSTRING[mjNTIMER]= {
  "step",
  "forward",
  "inverse",
  "position",
  "velocity",
  "actuation",
  "constraint",
  "advance",
  "pos_kinematics",
  "pos_inertia",
  "pos_collision",
  "pos_make",
  "pos_project",
  "col_broadphase",
  "col_narrowphase"
};
const char* mjTOPICSTRING[mjNTOPIC] = {
  "Step timing",
  "Compile timing",
  "Sleep/wake"
};
const char* mjLABELSTRING[mjNLABEL] = {
  "None",
  "Body",
  "Joint",
  "Geom",
  "Site",
  "Camera",
  "Light",
  "Tendon",
  "Actuator",
  "Constraint",
  "Flex",
  "Skin",
  "Selection",
  "SelPoint",
  "Contact",
  "ContactForce",
  "Island"
};
const char* mjFRAMESTRING[mjNFRAME] = {
  "None",
  "Body",
  "Geom",
  "Site",
  "Camera",
  "Light",
  "Contact",
  "World"
};
const char* mjVISSTRING[mjNVISFLAG][3] = {
  {"Convex Hull",     "0", "H"},
  {"Texture",         "1", "X"},
  {"Joint",           "0", "J"},
  {"Camera",          "0", "Q"},
  {"Actuator",        "0", "U"},
  {"Activation",      "0", ","},
  {"Light",           "0", "Z"},
  {"Tendon",          "1", "V"},
  {"Range Finder",    "1", "Y"},
  {"Equality",        "0", "E"},
  {"Inertia",         "0", "I"},
  {"Scale Inertia",   "0", "'"},
  {"Perturb Force",   "0", "B"},
  {"Perturb Object",  "1", "O"},
  {"Contact Point",   "0", "C"},
  {"Island",          "0", "N"},
  {"Contact Force",   "0", "F"},
  {"Contact Split",   "0", "P"},
  {"Transparent",     "0", "T"},
  {"Auto Connect",    "0", "A"},
  {"Center of Mass",  "0", "M"},
  {"Select Point",    "0", ""},
  {"Static Body",     "1", "D"},
  {"Skin",            "1", ";"},
  {"Flex Vert",       "0", ""},
  {"Flex Edge",       "1", ""},
  {"Flex Face",       "0", ""},
  {"Flex Skin",       "1", ""},
  {"Body Tree",       "0", "`"},
  {"Mesh Tree",       "0", "\\"},
  {"SDF iters",       "0", ""}
};
const char* mjRNDSTRING[mjNRNDFLAG][3] = {
  {"Shadow",      "1", "S"},
  {"Wireframe",   "0", "W"},
  {"Reflection",  "1", "R"},
  {"Additive",    "0", "L"},
  {"Skybox",      "1", "K"},
  {"Fog",         "0", "G"},
  {"Haze",        "1", "/"},
  {"Depth",       "0", ""},
  {"Segment",     "0", ","},
  {"Id Color",    "0", ""},
  {"Cull Face",   "1", ""}
};

//----------------------------- MJAPI FUNCTIONS --------------------------------
void mjrf_defaultContextConfig(mjrfContextConfig* config);
mjrfContext* mjrf_createContext(const mjrfContextConfig* config);
void mjrf_destroyContext(mjrfContext* ctx);
void mjrf_getRendererInfo(mjrfContext* ctx, mjrRendererInfo* info);
void mjrf_defaultRenderRequest(mjrfRenderRequest* request);
void mjrf_defaultReadPixelsRequest(mjrfReadPixelsRequest* request);
mjrfFrameHandle mjrf_render(mjrfContext* ctx, const mjrfRenderRequest* req, int nreq,
                      const mjrfReadPixelsRequest* read_req, int nread_req);
void mjrf_waitForFrame(mjrfContext* ctx, mjrfFrameHandle frame);
void mjrf_setClearColor(mjrfContext* ctx, const float color[3]);
void mjrf_defaultFrameStats(mjrfFrameStats* stats);
void mjrf_getFrameStats(mjrfContext* ctx, mjrfFrameHandle frame, mjrfFrameStats* stats_out);
void mjrf_defaultTextureConfig(mjrfTextureConfig* config);
mjrfTexture* mjrf_createTexture(mjrfContext* ctx, const mjrfTextureConfig* config);
void mjrf_destroyTexture(mjrfTexture* texture);
void mjrf_defaultTextureData(mjrfTextureData* data);
void mjrf_setTextureData(mjrfTexture* texture, const mjrfTextureData* data);
int mjrf_getTextureWidth(const mjrfTexture* texture);
int mjrf_getTextureHeight(const mjrfTexture* texture);
int mjrf_getTextureSamplerType(const mjrfTexture* texture);
void mjrf_defaultMeshConfig(mjrfMeshConfig* config);
mjrfMesh* mjrf_createMesh(mjrfContext* ctx, const mjrfMeshConfig* config);
void mjrf_destroyMesh(mjrfMesh* mesh);
void mjrf_defaultMeshData(mjrfMeshData* data);
void mjrf_setMeshData(mjrfMesh* mesh, const mjrfMeshData* data);
void mjrf_defaultSceneParams(mjrfSceneParams* params);
mjrfScene* mjrf_createScene(mjrfContext* ctx, const mjrfSceneParams* params);
void mjrf_destroyScene(mjrfScene* scene);
void mjrf_addLightToScene(mjrfScene* scene, mjrfLight* light);
void mjrf_removeLightFromScene(mjrfScene* scene, mjrfLight* light);
void mjrf_addRenderableToScene(mjrfScene* scene, mjrfRenderable* renderable);
void mjrf_removeRenderableFromScene(mjrfScene* scene, mjrfRenderable* renderable);
void mjrf_setSceneSkybox(mjrfScene* scene, const mjrfTexture* texture);
void mjrf_configureSceneFromModel(mjrfScene* scene, const mjModel* model);
void mjrf_defaultLightParams(mjrfLightParams* params);
mjrfLight* mjrf_createLight(mjrfContext* ctx, const mjrfLightParams* params);
void mjrf_destroyLight(mjrfLight* light);
void mjrf_setLightEnabled(mjrfLight* light, mjtBool enabled);
void mjrf_setLightShadowsEnabled(mjrfLight* light, mjtBool enabled);
void mjrf_setLightColor(mjrfLight* light, const float color[3]);
void mjrf_setLightIntensity(mjrfLight* light, float intensity);
void mjrf_setLightRange(mjrfLight* light, float range);
void mjrf_setLightCutoffAngle(mjrfLight* light, float cutoff);
void mjrf_setLightSoftness(mjrfLight* light, float softness);
void mjrf_setLightBulbRadius(mjrfLight* light, float radius);
void mjrf_setLightBlurWidth(mjrfLight* light, float blur_width);
void mjrf_setLightShadowMapSize(mjrfLight* light, int map_size);
void mjrf_setLightTransform(mjrfLight* light, const float position[3], const float direction[3]);
int mjrf_getLightType(const mjrfLight* light);
void mjrf_defaultMaterial(mjrfMaterial* material);
void mjrf_defaultRenderableParams(mjrfRenderableParams* params);
mjrfRenderable* mjrf_createRenderable(mjrfContext* ctx, const mjrfRenderableParams* params);
void mjrf_destroyRenderable(mjrfRenderable* renderable);
void mjrf_setRenderableMesh(mjrfRenderable* renderable, const mjrfMesh* mesh, int elem_offset,
                      int elem_count);
void mjrf_setRenderableGeomMesh(mjrfRenderable* renderable, int type, int nstack, int nslice,
                          int nquad);
void mjrf_setRenderableMaterial(mjrfRenderable* renderable, const mjrfMaterial* material);
void mjrf_getRenderableMaterial(mjrfRenderable* renderable, mjrfMaterial* material);
void mjrf_setRenderableTransform(mjrfRenderable* renderable, const float position[3],
                           const float rotation[9]);
void mjrf_setRenderableSize(mjrfRenderable* renderable, const float size[3]);
void mjrf_defaultRenderTargetConfig(mjrfRenderTargetConfig* config);
mjrfRenderTarget* mjrf_createRenderTarget(mjrfContext* ctx, const mjrfRenderTargetConfig* config);
void mjrf_destroyRenderTarget(mjrfRenderTarget* render_target);
void mjrf_resizeRenderTarget(mjrfRenderTarget* render_target, int width, int height);
void mj_defaultVFS(mjVFS* vfs);
int mj_mountVFS(mjVFS* vfs, const char* filepath, const mjpResourceProvider* provider);
int mj_unmountVFS(mjVFS* vfs, const char* filename);
int mj_addFileVFS(mjVFS* vfs, const char* directory, const char* filename);
int mj_addBufferVFS(mjVFS* vfs, const char* name, const void* buffer, int nbuffer);
int mj_deleteFileVFS(mjVFS* vfs, const char* filename);
int mj_containsBufferVFS(mjVFS* vfs, const char* name);
int mj_containsFileVFS(mjVFS* vfs, const char* directory, const char* filename);
void mj_deleteVFS(mjVFS* vfs);
size_t mj_getCacheSize(const mjCache* cache);
size_t mj_getCacheCapacity(const mjCache* cache);
size_t mj_setCacheCapacity(mjCache* cache, size_t size);
mjCache* mj_getCache(void);
void mj_clearCache(mjCache* cache);
mjModel* mj_loadXML(const char* filename, const mjVFS* vfs, char* error, int error_sz);
mjSpec* mj_parseXML(const char* filename, const mjVFS* vfs, char* error, int error_sz);
mjSpec* mj_parseXMLString(const char* xml, const mjVFS* vfs, char* error, int error_sz);
mjSpec* mj_parse(const char* filename, const char* content_type,
                 const mjVFS* vfs, char* error, int error_sz);
mjtSize mj_encode(const mjSpec* s, const mjModel* m, const char* filename,
                  const char* content_type, const mjVFS* vfs, char* error,
                  int error_sz);
mjModel* mj_compile(mjSpec* s, const mjVFS* vfs);
int mj_copyBack(mjSpec* s, const mjModel* m);
int mj_recompile(mjSpec* s, const mjVFS* vfs, mjModel* m, mjData* d);
int mj_saveLastXML(const char* filename, const mjModel* m, char* error, int error_sz);
void mj_freeLastXML(void);
int mj_saveXMLString(const mjSpec* s, char* xml, int xml_sz, char* error, int error_sz);
int mj_saveXML(const mjSpec* s, const char* filename, char* error, int error_sz);
void mju_getXMLDependencies(const char* filename, mjStringVec* dependencies);
void mj_step(const mjModel* m, mjData* d);
void mj_step1(const mjModel* m, mjData* d);
void mj_step2(const mjModel* m, mjData* d);
void mj_forward(const mjModel* m, mjData* d);
void mj_inverse(const mjModel* m, mjData* d);
void mj_forwardSkip(const mjModel* m, mjData* d, int skipstage, int skipsensor);
void mj_inverseSkip(const mjModel* m, mjData* d, int skipstage, int skipsensor);
void mj_defaultLROpt(mjLROpt* opt);
void mj_defaultSolRefImp(mjtNum* solref, mjtNum* solimp);
void mj_defaultOption(mjOption* opt);
void mj_defaultVisual(mjVisual* vis);
mjModel* mj_copyModel(mjModel* dest, const mjModel* src);
void mj_saveModel(const mjModel* m, const char* filename, void* buffer, int buffer_sz);
mjModel* mj_loadModel(const char* filename, const mjVFS* vfs);
mjModel* mj_loadModelBuffer(const void* buffer, int buffer_sz);
void mj_deleteModel(mjModel* m);
mjtSize mj_sizeModel(const mjModel* m);
mjData* mj_makeData(const mjModel* m);
mjData* mj_copyData(mjData* dest, const mjModel* m, const mjData* src);
mjData* mjv_copyData(mjData* dest, const mjModel* m, const mjData* src);
void mj_resetCtrl(const mjModel* m, mjData* d);
void mj_resetData(const mjModel* m, mjData* d);
void mj_resetDataDebug(const mjModel* m, mjData* d, unsigned char debug_value);
void mj_resetDataKeyframe(const mjModel* m, mjData* d, int key);
void mj_markStack(mjData* d);
void mj_freeStack(mjData* d);
void* mj_stackAllocByte(mjData* d, size_t bytes, size_t alignment);
mjtNum* mj_stackAllocNum(mjData* d, size_t size);
int* mj_stackAllocInt(mjData* d, size_t size);
void mj_deleteData(mjData* d);
void mj_resetCallbacks(void);
void mj_setConst(mjModel* m, mjData* d);
int mj_setLengthRange(mjModel* m, mjData* d, int index,
                      const mjLROpt* opt, char* error, int error_sz);
mjSpec* mj_makeSpec(void);
mjSpec* mj_copySpec(const mjSpec* s);
void mj_deleteSpec(mjSpec* s);
int mjs_activatePlugin(mjSpec* s, const char* name);
int mjs_setDeepCopy(mjSpec* s, int deepcopy);
void mj_printFormattedModel(const mjModel* m, const char* filename, const char* float_format);
void mj_printModel(const mjModel* m, const char* filename);
void mj_printFormattedData(const mjModel* m, const mjData* d, const char* filename,
                           const char* float_format);
void mj_printData(const mjModel* m, const mjData* d, const char* filename);
void mju_printMat(const mjtNum* mat, int nr, int nc);
void mju_printMatSparse(const mjtNum* mat, int nr,
                        const int* rownnz, const int* rowadr, const int* colind);
int mj_printSchema(const char* filename, char* buffer, int buffer_sz,
                   int flg_html, int flg_pad);
void mj_printScene(const mjvScene* s, const char* filename);
void mj_printFormattedScene(const mjvScene* s, const char* filename,
                            const char* float_format);
void mj_fwdKinematics(const mjModel* m, mjData* d);
void mj_fwdPosition(const mjModel* m, mjData* d);
void mj_fwdVelocity(const mjModel* m, mjData* d);
void mj_fwdActuation(const mjModel* m, mjData* d);
void mj_fwdAcceleration(const mjModel* m, mjData* d);
void mj_fwdConstraint(const mjModel* m, mjData* d);
void mj_Euler(const mjModel* m, mjData* d);
void mj_RungeKutta(const mjModel* m, mjData* d, int N);
void mj_implicit(const mjModel* m, mjData* d);
void mj_invPosition(const mjModel* m, mjData* d);
void mj_invVelocity(const mjModel* m, mjData* d);
void mj_invConstraint(const mjModel* m, mjData* d);
void mj_compareFwdInv(const mjModel* m, mjData* d);
void mj_sensorPos(const mjModel* m, mjData* d);
void mj_sensorVel(const mjModel* m, mjData* d);
void mj_sensorAcc(const mjModel* m, mjData* d);
void mj_energyPos(const mjModel* m, mjData* d);
void mj_energyVel(const mjModel* m, mjData* d);
void mj_checkPos(const mjModel* m, mjData* d);
void mj_checkVel(const mjModel* m, mjData* d);
void mj_checkAcc(const mjModel* m, mjData* d);
void mj_kinematics(const mjModel* m, mjData* d);
void mj_comPos(const mjModel* m, mjData* d);
void mj_camlight(const mjModel* m, mjData* d);
void mj_flex(const mjModel* m, mjData* d);
void mj_tendon(const mjModel* m, mjData* d);
void mj_transmission(const mjModel* m, mjData* d);
void mj_crb(const mjModel* m, mjData* d);
void mj_makeM(const mjModel* m, mjData* d);
void mj_factorM(const mjModel* m, mjData* d);
void mj_solveM(const mjModel* m, mjData* d, mjtNum* x, const mjtNum* y, int n);
void mj_solveM2(const mjModel* m, mjData* d, mjtNum* x, const mjtNum* y,
                const mjtNum* sqrtInvD, int n);
void mj_comVel(const mjModel* m, mjData* d);
void mj_passive(const mjModel* m, mjData* d);
void mj_subtreeVel(const mjModel* m, mjData* d);
void mj_rne(const mjModel* m, mjData* d, int flg_acc, mjtNum* result);
void mj_rnePostConstraint(const mjModel* m, mjData* d);
int mj_maxContact(const mjModel* m, int g1, int g2, int has_margin);
void mj_collision(const mjModel* m, mjData* d);
void mj_makeConstraint(const mjModel* m, mjData* d);
void mj_island(const mjModel* m, mjData* d);
void mj_projectConstraint(const mjModel* m, mjData* d);
void mj_referenceConstraint(const mjModel* m, mjData* d);
void mj_constraintUpdate(const mjModel* m, mjData* d, const mjtNum* jar,
                         mjtNum cost[1], int flg_coneHessian);
int mj_stateSize(const mjModel* m, int sig);
void mj_getState(const mjModel* m, const mjData* d, mjtNum* state, int sig);
void mj_extractState(const mjModel* m, const mjtNum* src, int srcsig,
                     mjtNum* dst, int dstsig);
void mj_setState(const mjModel* m, mjData* d, const mjtNum* state, int sig);
void mj_copyState(const mjModel* m, const mjData* src, mjData* dst, int sig);
const mjtNum* mj_readCtrl(const mjModel* m, const mjData* d, int id, mjtNum time,
                          mjtNum* result, int interp);
const mjtNum* mj_readSensor(const mjModel* m, const mjData* d, int id, mjtNum time,
                            mjtNum* result, int interp);
void mj_initCtrlHistory(const mjModel* m, mjData* d, int id,
                        const mjtNum* times, const mjtNum* values);
void mj_initSensorHistory(const mjModel* m, mjData* d, int id,
                          const mjtNum* times, const mjtNum* values, mjtNum phase);
void mj_setKeyframe(mjModel* m, const mjData* d, int k);
int mj_addContact(const mjModel* m, mjData* d, const mjContact* con);
int mj_isPyramidal(const mjModel* m);
int mj_isSparse(const mjModel* m);
int mj_isDual(const mjModel* m);
void mj_mulJacVec(const mjModel* m, const mjData* d, mjtNum* res, const mjtNum* vec);
void mj_mulJacTVec(const mjModel* m, const mjData* d, mjtNum* res, const mjtNum* vec);
void mj_jac(const mjModel* m, const mjData* d, mjtNum* jacp, mjtNum* jacr,
            const mjtNum point[3], int body);
void mj_jacBody(const mjModel* m, const mjData* d, mjtNum* jacp, mjtNum* jacr, int body);
void mj_jacBodyCom(const mjModel* m, const mjData* d, mjtNum* jacp, mjtNum* jacr, int body);
void mj_jacSubtreeCom(const mjModel* m, mjData* d, mjtNum* jacp, int body);
void mj_jacGeom(const mjModel* m, const mjData* d, mjtNum* jacp, mjtNum* jacr, int geom);
void mj_jacSite(const mjModel* m, const mjData* d, mjtNum* jacp, mjtNum* jacr, int site);
void mj_jacPointAxis(const mjModel* m, mjData* d, mjtNum* jacPoint, mjtNum* jacAxis,
                     const mjtNum point[3], const mjtNum axis[3], int body);
void mj_jacDot(const mjModel* m, const mjData* d, mjtNum* jacp, mjtNum* jacr,
               const mjtNum point[3], int body);
void mj_angmomMat(const mjModel* m, mjData* d, mjtNum* mat, int body);
int mj_name2id(const mjModel* m, int type, const char* name);
const char* mj_id2name(const mjModel* m, int type, int id);
const char* mj_actuatorInputName(const mjModel* m, int id, int input);
void mj_fullM(const mjModel* m, const mjData* d, mjtNum* dst);
void mj_mulM(const mjModel* m, const mjData* d, mjtNum* res, const mjtNum* vec);
void mj_mulM2(const mjModel* m, const mjData* d, mjtNum* res, const mjtNum* vec);
void mj_addM(const mjModel* m, mjData* d, mjtNum* dst, int* rownnz, int* rowadr, int* colind);
void mj_applyFT(const mjModel* m, mjData* d, const mjtNum force[3], const mjtNum torque[3],
                const mjtNum point[3], int body, mjtNum* qfrc_target);
void mj_objectVelocity(const mjModel* m, const mjData* d,
                       int objtype, int objid, mjtNum res[6], int flg_local);
void mj_objectAcceleration(const mjModel* m, const mjData* d,
                           int objtype, int objid, mjtNum res[6], int flg_local);
mjtNum mj_geomDistance(const mjModel* m, mjData* d, int geom1, int geom2, mjtNum distmax,
                       mjtNum fromto[6]);
int mj_insideSite(const mjModel* m, const mjData* d, int siteid, const mjtNum point[3]);
void mj_contactForce(const mjModel* m, const mjData* d, int id, mjtNum result[6]);
void mj_differentiatePos(const mjModel* m, mjtNum* qvel, mjtNum dt,
                         const mjtNum* qpos1, const mjtNum* qpos2);
void mj_integratePos(const mjModel* m, mjtNum* qpos, const mjtNum* qvel, mjtNum dt);
void mj_normalizeQuat(const mjModel* m, mjtNum* qpos);
void mj_local2Global(mjData* d, mjtNum xpos[3], mjtNum xmat[9], const mjtNum pos[3],
                     const mjtNum quat[4], int body, mjtByte sameframe);
mjtNum mj_getTotalmass(const mjModel* m);
void mj_setTotalmass(mjModel* m, mjtNum newmass);
const char* mj_getPluginConfig(const mjModel* m, int plugin_id, const char* attrib);
void mj_loadPluginLibrary(const char* path);
void mj_loadAllPluginLibraries(const char* directory, mjfPluginLibraryLoadCallback callback);
int mj_version(void);
const char* mj_versionString(void);
mjtNum mj_ray(const mjModel* m, const mjData* d, const mjtNum pnt[3], const mjtNum vec[3],
              const mjtByte* geomgroup, mjtBool flg_static, int bodyexclude,
              int geomid[1], mjtNum normal[3]);
void mj_multiRay(const mjModel* m, mjData* d, const mjtNum pnt[3], const mjtNum* vec,
                 const mjtByte* geomgroup, mjtBool flg_static, int bodyexclude,
                 int* geomid, mjtNum* dist, mjtNum* normal, int nray, mjtNum cutoff);
mjtNum mj_rayHfield(const mjModel* m, const mjData* d, int geomid,
                    const mjtNum pnt[3], const mjtNum vec[3], mjtNum normal[3]);
mjtNum mj_rayMesh(const mjModel* m, const mjData* d, int geomid,
                  const mjtNum pnt[3], const mjtNum vec[3], mjtNum normal[3]);
mjtNum mju_rayGeom(const mjtNum pos[3], const mjtNum mat[9], const mjtNum size[3],
                   const mjtNum pnt[3], const mjtNum vec[3], int geomtype,
                   mjtNum normal[3]);
mjtNum mj_rayFlex(const mjModel* m, const mjData* d, int flex_layer,
                  mjtBool flg_vert, mjtBool flg_edge, mjtBool flg_face,
                  mjtBool flg_skin, int flexid, const mjtNum pnt[3],
                  const mjtNum vec[3], int vertid[1], mjtNum normal[3]);
mjtNum mju_raySkin(int nface, int nvert, const int* face, const float* vert,
                   const mjtNum pnt[3], const mjtNum vec[3], int vertid[1]);
void mjv_defaultCamera(mjvCamera* cam);
void mjv_defaultFreeCamera(const mjModel* m, mjvCamera* cam);
void mjv_defaultPerturb(mjvPerturb* pert);
void mjv_room2model(mjtNum modelpos[3], mjtNum modelquat[4], const mjtNum roompos[3],
                    const mjtNum roomquat[4], const mjvScene* scn);
void mjv_model2room(mjtNum roompos[3], mjtNum roomquat[4], const mjtNum modelpos[3],
                    const mjtNum modelquat[4], const mjvScene* scn);
void mjv_cameraInModel(mjtNum headpos[3], mjtNum forward[3], mjtNum up[3],
                       const mjvScene* scn);
void mjv_cameraInRoom(mjtNum headpos[3], mjtNum forward[3], mjtNum up[3],
                      const mjvScene* scn);
mjtNum mjv_frustumHeight(const mjvScene* scn);
void mjv_alignToCamera(mjtNum res[3], const mjtNum vec[3], const mjtNum forward[3]);
void mjv_moveCamera(const mjModel* m, int action, mjtNum reldx, mjtNum reldy, mjvCamera* cam);
void mjv_movePerturb(const mjModel* m, const mjData* d, int action, mjtNum reldx,
                     mjtNum reldy, const mjvScene* scn, mjvPerturb* pert);
void mjv_moveModel(const mjModel* m, int action, mjtNum reldx, mjtNum reldy,
                   const mjtNum roomup[3], mjvScene* scn);
void mjv_initPerturb(const mjModel* m, mjData* d, const mjvScene* scn, mjvPerturb* pert);
void mjv_applyPerturbPose(const mjModel* m, mjData* d, const mjvPerturb* pert,
                          int flg_paused);
void mjv_applyPerturbForce(const mjModel* m, mjData* d, const mjvPerturb* pert);
mjvGLCamera mjv_averageCamera(const mjvGLCamera* cam1, const mjvGLCamera* cam2);
mjvGLCamera mjv_camera2GLCamera(const mjModel* model, const mjData* data,
                                const mjvCamera* mjv_camera);
int mjv_select(const mjModel* m, const mjData* d, const mjvOption* vopt,
               mjtNum aspectratio, mjtNum relx, mjtNum rely,
               const mjvScene* scn, mjtNum selpnt[3],
               int geomid[1], int flexid[1], int skinid[1]);
void mjv_defaultOption(mjvOption* opt);
void mjv_defaultFigure(mjvFigure* fig);
void mjv_initGeom(mjvGeom* geom, int type, const mjtNum size[3],
                  const mjtNum pos[3], const mjtNum mat[9], const float rgba[4]);
void mjv_connector(mjvGeom* geom, int type, mjtNum width,
                   const mjtNum from[3], const mjtNum to[3]);
void mjv_defaultScene(mjvScene* scn);
void mjv_makeScene(const mjModel* m, mjvScene* scn, int maxgeom);
void mjv_freeScene(mjvScene* scn);
void mjv_updateScene(const mjModel* m, mjData* d, const mjvOption* opt,
                     const mjvPerturb* pert, mjvCamera* cam, int catmask, mjvScene* scn);
void mjv_copyModel(mjModel* dest, const mjModel* src);
void mjv_addGeoms(const mjModel* m, mjData* d, const mjvOption* opt,
                  const mjvPerturb* pert, int catmask, mjvScene* scn);
void mjv_makeLights(const mjModel* m, const mjData* d, mjvScene* scn);
void mjv_updateCamera(const mjModel* m, const mjData* d, mjvCamera* cam, mjvScene* scn);
void mjv_updateSkin(const mjModel* m, const mjData* d, mjvScene* scn);
void mjv_cameraFrame(mjtNum headpos[3], mjtNum forward[3], mjtNum up[3], mjtNum right[3],
                     const mjData* d, const mjvCamera* cam);
void mjv_cameraFrustum(float zver[2], float zhor[2], float zclip[2],  const mjModel* m,
                       const mjvCamera* cam);
void mjr_defaultContext(mjrContext* con);
void mjr_defaultRendererInfo(mjrRendererInfo* info);
void mjr_getRendererInfo(mjrRendererInfo* info);
void mjr_makeContext(const mjModel* m, mjrContext* con, int fontscale);
void mjr_changeFont(int fontscale, mjrContext* con);
void mjr_addAux(int index, int width, int height, int samples, mjrContext* con);
void mjr_freeContext(mjrContext* con);
void mjr_resizeOffscreen(int width, int height, mjrContext* con);
void mjr_uploadTexture(const mjModel* m, const mjrContext* con, int texid);
void mjr_uploadMesh(const mjModel* m, const mjrContext* con, int meshid);
void mjr_uploadHField(const mjModel* m, const mjrContext* con, int hfieldid);
void mjr_restoreBuffer(const mjrContext* con);
void mjr_setBuffer(int framebuffer, mjrContext* con);
void mjr_readPixels(unsigned char* rgb, float* depth,
                    mjrRect viewport, const mjrContext* con);
void mjr_drawPixels(const unsigned char* rgb, const float* depth,
                    mjrRect viewport, const mjrContext* con);
void mjr_blitBuffer(mjrRect src, mjrRect dst,
                    int flg_color, int flg_depth, const mjrContext* con);
void mjr_setAux(int index, const mjrContext* con);
void mjr_blitAux(int index, mjrRect src, int left, int bottom, const mjrContext* con);
void mjr_text(int font, const char* txt, const mjrContext* con,
              float x, float y, float r, float g, float b);
void mjr_overlay(int font, int gridpos, mjrRect viewport,
                 const char* overlay, const char* overlay2, const mjrContext* con);
mjrRect mjr_maxViewport(const mjrContext* con);
void mjr_rectangle(mjrRect viewport, float r, float g, float b, float a);
void mjr_label(mjrRect viewport, int font, const char* txt,
               float r, float g, float b, float a, float rt, float gt, float bt,
               const mjrContext* con);
void mjr_figure(mjrRect viewport, mjvFigure* fig, const mjrContext* con);
void mjr_render(mjrRect viewport, mjvScene* scn, const mjrContext* con);
void mjr_finish(void);
int mjr_getError(void);
int mjr_findRect(int x, int y, int nrect, const mjrRect* rect);
mjuiThemeSpacing mjui_themeSpacing(int ind);
mjuiThemeColor mjui_themeColor(int ind);
void mjui_add(mjUI* ui, const mjuiDef* def);
void mjui_addToSection(mjUI* ui, int sect, const mjuiDef* def);
void mjui_resize(mjUI* ui, const mjrContext* con);
void mjui_update(int section, int item, const mjUI* ui,
                 const mjuiState* state, const mjrContext* con);
mjuiItem* mjui_event(mjUI* ui, mjuiState* state, const mjrContext* con);
void mjui_render(mjUI* ui, const mjuiState* state, const mjrContext* con);
void mju_error(const char* msg, ...) mjPRINTFLIKE(1, 2);
void mju_warning(const char* msg, ...) mjPRINTFLIKE(1, 2);
void mju_clearHandlers(void);
mjfLogHandler mju_setLogHandler(mjfLogHandler handler);
mjLogConfig mju_getLogConfig(void);
void mju_setLogConfig(mjLogConfig config);
void mju_info(int topic, const char* msg, ...) mjPRINTFLIKE(2, 3);
void mju_message(const mjLogMessage* msg);
void* mju_malloc(size_t size);
void mju_free(void* ptr);
void mj_warning(mjData* d, int warning, int info);
void mju_writeLog(const char* type, const char* msg);
const char* mjs_getError(mjSpec* s);
const double* mjs_getTimer(mjSpec* s);
int mjs_isWarning(mjSpec* s);
int mjs_numWarnings(const mjSpec* spec);
const char* mjs_getWarning(const mjSpec* spec, int index);
void mju_zero3(mjtNum res[3]);
void mju_copy3(mjtNum res[3], const mjtNum data[3]);
void mju_scl3(mjtNum res[3], const mjtNum vec[3], mjtNum scl);
void mju_add3(mjtNum res[3], const mjtNum vec1[3], const mjtNum vec2[3]);
void mju_sub3(mjtNum res[3], const mjtNum vec1[3], const mjtNum vec2[3]);
void mju_addTo3(mjtNum res[3], const mjtNum vec[3]);
void mju_subFrom3(mjtNum res[3], const mjtNum vec[3]);
void mju_addToScl3(mjtNum res[3], const mjtNum vec[3], mjtNum scl);
void mju_addScl3(mjtNum res[3], const mjtNum vec1[3], const mjtNum vec2[3], mjtNum scl);
mjtNum mju_normalize3(mjtNum vec[3]);
mjtNum mju_norm3(const mjtNum vec[3]);
mjtNum mju_dot3(const mjtNum vec1[3], const mjtNum vec2[3]);
mjtNum mju_dist3(const mjtNum pos1[3], const mjtNum pos2[3]);
void mju_mulMatVec3(mjtNum res[3], const mjtNum mat[9], const mjtNum vec[3]);
void mju_mulMatTVec3(mjtNum res[3], const mjtNum mat[9], const mjtNum vec[3]);
void mju_cross(mjtNum res[3], const mjtNum a[3], const mjtNum b[3]);
void mju_zero4(mjtNum res[4]);
void mju_unit4(mjtNum res[4]);
void mju_copy4(mjtNum res[4], const mjtNum data[4]);
mjtNum mju_normalize4(mjtNum vec[4]);
void mju_zero(mjtNum* res, int n);
void mju_fill(mjtNum* res, mjtNum val, int n);
void mju_copy(mjtNum* res, const mjtNum* vec, int n);
mjtNum mju_sum(const mjtNum* vec, int n);
mjtNum mju_L1(const mjtNum* vec, int n);
void mju_scl(mjtNum* res, const mjtNum* vec, mjtNum scl, int n);
void mju_add(mjtNum* res, const mjtNum* vec1, const mjtNum* vec2, int n);
void mju_sub(mjtNum* res, const mjtNum* vec1, const mjtNum* vec2, int n);
void mju_addTo(mjtNum* res, const mjtNum* vec, int n);
void mju_subFrom(mjtNum* res, const mjtNum* vec, int n);
void mju_addToScl(mjtNum* res, const mjtNum* vec, mjtNum scl, int n);
void mju_addScl(mjtNum* res, const mjtNum* vec1, const mjtNum* vec2, mjtNum scl, int n);
mjtNum mju_normalize(mjtNum* res, int n);
mjtNum mju_norm(const mjtNum* res, int n);
mjtNum mju_dot(const mjtNum* vec1, const mjtNum* vec2, int n);
void mju_mulMatVec(mjtNum* res, const mjtNum* mat, const mjtNum* vec, int nr, int nc);
void mju_mulMatTVec(mjtNum* res, const mjtNum* mat, const mjtNum* vec, int nr, int nc);
mjtNum mju_mulVecMatVec(const mjtNum* vec1, const mjtNum* mat, const mjtNum* vec2, int n);
void mju_transpose(mjtNum* res, const mjtNum* mat, int nr, int nc);
void mju_symmetrize(mjtNum* res, const mjtNum* mat, int n);
void mju_eye(mjtNum* mat, int n);
void mju_mulMatMat(mjtNum* res, const mjtNum* mat1, const mjtNum* mat2,
                   int r1, int c1, int c2);
void mju_mulMatMatT(mjtNum* res, const mjtNum* mat1, const mjtNum* mat2,
                    int r1, int c1, int r2);
void mju_mulMatTMat(mjtNum* res, const mjtNum* mat1, const mjtNum* mat2,
                    int r1, int c1, int c2);
void mju_sqrMatTD(mjtNum* res, const mjtNum* mat, const mjtNum* diag, int nr, int nc);
void mju_transformSpatial(mjtNum res[6], const mjtNum vec[6], int flg_force,
                          const mjtNum newpos[3], const mjtNum oldpos[3],
                          const mjtNum rotnew2old[9]);
int mju_dense2sparse(mjtNum* res, const mjtNum* mat, int nr, int nc,
                     int* rownnz, int* rowadr, int* colind, int nnz);
void mju_sparse2dense(mjtNum* res, const mjtNum* mat, int nr, int nc,
                      const int* rownnz, const int* rowadr, const int* colind);
void mju_sym2dense(mjtNum* res, const mjtNum* mat, int n,
                   const int* rownnz, const int* rowadr, const int* colind);
void mju_rotVecQuat(mjtNum res[3], const mjtNum vec[3], const mjtNum quat[4]);
void mju_negQuat(mjtNum res[4], const mjtNum quat[4]);
void mju_mulQuat(mjtNum res[4], const mjtNum quat1[4], const mjtNum quat2[4]);
void mju_mulQuatAxis(mjtNum res[4], const mjtNum quat[4], const mjtNum axis[3]);
void mju_axisAngle2Quat(mjtNum res[4], const mjtNum axis[3], mjtNum angle);
void mju_quat2Vel(mjtNum res[3], const mjtNum quat[4], mjtNum dt);
void mju_subQuat(mjtNum res[3], const mjtNum qa[4], const mjtNum qb[4]);
void mju_quat2Mat(mjtNum res[9], const mjtNum quat[4]);
void mju_mat2Quat(mjtNum quat[4], const mjtNum mat[9]);
void mju_derivQuat(mjtNum res[4], const mjtNum quat[4], const mjtNum vel[3]);
void mju_quatIntegrate(mjtNum quat[4], const mjtNum vel[3], mjtNum scale);
void mju_quatZ2Vec(mjtNum quat[4], const mjtNum vec[3]);
int mju_mat2Rot(mjtNum quat[4], const mjtNum mat[9]);
void mju_euler2Quat(mjtNum quat[4], const mjtNum euler[3], const char* seq);
void mju_mulPose(mjtNum posres[3], mjtNum quatres[4],
                 const mjtNum pos1[3], const mjtNum quat1[4],
                 const mjtNum pos2[3], const mjtNum quat2[4]);
void mju_negPose(mjtNum posres[3], mjtNum quatres[4],
                 const mjtNum pos[3], const mjtNum quat[4]);
void mju_trnVecPose(mjtNum res[3], const mjtNum pos[3], const mjtNum quat[4],
                    const mjtNum vec[3]);
int mju_cholFactor(mjtNum* mat, int n, mjtNum mindiag);
void mju_cholSolve(mjtNum* res, const mjtNum* mat, const mjtNum* vec, int n);
int mju_cholUpdate(mjtNum* mat, mjtNum* x, int n, int flg_plus);
mjtNum mju_cholFactorBand(mjtNum* mat, int ntotal, int nband, int ndense,
                          mjtNum diagadd, mjtNum diagmul);
void mju_cholSolveBand(mjtNum* res, const mjtNum* mat, const mjtNum* vec,
                       int ntotal, int nband, int ndense);
void mju_band2Dense(mjtNum* res, const mjtNum* mat, int ntotal, int nband, int ndense,
                    mjtBool flg_sym);
void mju_dense2Band(mjtNum* res, const mjtNum* mat, int ntotal, int nband, int ndense);
void mju_bandMulMatVec(mjtNum* res, const mjtNum* mat, const mjtNum* vec,
                       int ntotal, int nband, int ndense, int nvec, mjtBool flg_sym);
int mju_bandDiag(int i, int ntotal, int nband, int ndense);
int mju_eig3(mjtNum eigval[3], mjtNum eigvec[9], mjtNum quat[4], const mjtNum mat[9]);
int mju_boxQP(mjtNum* res, mjtNum* R, int* index, const mjtNum* H, const mjtNum* g, int n,
              const mjtNum* lower, const mjtNum* upper);
void mju_boxQPmalloc(mjtNum** res, mjtNum** R, int** index, mjtNum** H, mjtNum** g, int n,
                     mjtNum** lower, mjtNum** upper);
mjtNum mju_muscleGain(mjtNum len, mjtNum vel, const mjtNum lengthrange[2],
                      mjtNum acc0, const mjtNum prm[9]);
mjtNum mju_muscleBias(mjtNum len, const mjtNum lengthrange[2],
                      mjtNum acc0, const mjtNum prm[9]);
mjtNum mju_muscleDynamics(mjtNum ctrl, mjtNum act, const mjtNum prm[3]);
void mju_encodePyramid(mjtNum* pyramid, const mjtNum* force, const mjtNum* mu, int dim);
void mju_decodePyramid(mjtNum* force, const mjtNum* pyramid, const mjtNum* mu, int dim);
mjtNum mju_springDamper(mjtNum pos0, mjtNum vel0, mjtNum Kp, mjtNum Kv, mjtNum dt);
mjtNum mju_min(mjtNum a, mjtNum b);
mjtNum mju_max(mjtNum a, mjtNum b);
mjtNum mju_clip(mjtNum x, mjtNum min, mjtNum max);
mjtNum mju_sign(mjtNum x);
int mju_round(mjtNum x);
const char* mju_type2Str(int type);
int mju_str2Type(const char* str);
const char* mju_writeNumBytes(size_t nbytes);
const char* mju_warningText(int warning, size_t info);
int mju_isBad(mjtNum x);
int mju_isZero(const mjtNum* vec, int n);
mjtNum mju_standardNormal(mjtNum* num2);
void mju_f2n(mjtNum* res, const float* vec, int n);
void mju_n2f(float* res, const mjtNum* vec, int n);
void mju_d2n(mjtNum* res, const double* vec, int n);
void mju_n2d(double* res, const mjtNum* vec, int n);
void mju_insertionSort(mjtNum* list, int n);
void mju_insertionSortInt(int* list, int n);
mjtNum mju_Halton(int index, int base);
char* mju_strncpy(char *dst, const char *src, int n);
mjtNum mju_sigmoid(mjtNum x);
const mjpPlugin* mjc_getSDF(const mjModel* m, int id);
mjtNum mjc_distance(const mjModel* m, const mjData* d, const mjSDF* s, const mjtNum x[3]);
void mjc_gradient(const mjModel* m, const mjData* d, const mjSDF* s, mjtNum gradient[3],
                  const mjtNum x[3]);
void mjd_transitionFD(const mjModel* m, mjData* d, mjtNum eps, mjtBool flg_centered,
                      mjtNum* A, mjtNum* B, mjtNum* C, mjtNum* D);
void mjd_inverseFD(const mjModel* m, mjData* d, mjtNum eps, mjtBool flg_actuation,
                   mjtNum *DfDq, mjtNum *DfDv, mjtNum *DfDa,
                   mjtNum *DsDq, mjtNum *DsDv, mjtNum *DsDa,
                   mjtNum *DmDq);
void mjd_subQuat(const mjtNum qa[4], const mjtNum qb[4], mjtNum Da[9], mjtNum Db[9]);
void mjd_quatIntegrate(const mjtNum vel[3], mjtNum scale,
                       mjtNum Dquat[9], mjtNum Dvel[9], mjtNum Dscale[3]);
void mjp_defaultPlugin(mjpPlugin* plugin);
int mjp_registerPlugin(const mjpPlugin* plugin);
int mjp_pluginCount(void);
const mjpPlugin* mjp_getPlugin(const char* name, int* slot);
const mjpPlugin* mjp_getPluginAtSlot(int slot);
void mjp_defaultResourceProvider(mjpResourceProvider* provider);
int mjp_registerResourceProvider(const mjpResourceProvider* provider);
int mjp_resourceProviderCount(void);
const mjpResourceProvider* mjp_getResourceProvider(const char* resource_name);
const mjpResourceProvider* mjp_getResourceProviderAtSlot(int slot);
void mjp_registerDecoder(const mjpDecoder* decoder);
void mjp_defaultDecoder(mjpDecoder* decoder);
const mjpDecoder* mjp_findDecoder(const mjResource* resource, const char* content_type);
void mjp_registerEncoder(const mjpEncoder* encoder);
void mjp_defaultEncoder(mjpEncoder* encoder);
const mjpEncoder* mjp_findEncoder(const char* filename, const char* content_type);
void mjp_registerArchiveResourceProvider(const mjpResourceProvider* provider);
const mjpResourceProvider* mjp_findArchiveResourceProvider(const char* resource_name);
int mjp_archiveResourceProviderCount(void);
mjResource* mju_openResource(const char* dir, const char* name,
                             const mjVFS* vfs, char* error, size_t nerror);
void mju_closeResource(mjResource* resource);
int mju_readResource(mjResource* resource, const void** buffer);
mjtSize mju_writeResource(const char* name, const void* buffer, mjtSize nbytes,
                          const mjVFS* vfs, char* error, size_t nerror);
void mju_getResourceDir(mjResource* resource, const char** dir, int* ndir);
int mju_isModifiedResource(const mjResource* resource, const char* timestamp);
mjSpec* mju_decodeResource(mjResource* resource, const char* content_type,
                           const mjVFS* vfs);
void mju_threadpool(mjData* d, int nthread);
mjsElement* mjs_attach(mjsElement* parent, const mjsElement* child,
                       const char* prefix, const char* suffix);
mjsBody* mjs_addBody(mjsBody* body, const mjsDefault* def);
mjsSite* mjs_addSite(mjsBody* body, const mjsDefault* def);
mjsJoint* mjs_addJoint(mjsBody* body, const mjsDefault* def);
mjsJoint* mjs_addFreeJoint(mjsBody* body);
mjsGeom* mjs_addGeom(mjsBody* body, const mjsDefault* def);
mjsCamera* mjs_addCamera(mjsBody* body, const mjsDefault* def);
mjsLight* mjs_addLight(mjsBody* body, const mjsDefault* def);
mjsFrame* mjs_addFrame(mjsBody* body, mjsFrame* parentframe);
int mjs_delete(mjSpec* spec, mjsElement* element);
mjsActuator* mjs_addActuator(mjSpec* s, const mjsDefault* def);
mjsSensor* mjs_addSensor(mjSpec* s);
mjsFlex* mjs_addFlex(mjSpec* s);
mjsFlex* mjs_makeFlex(mjsBody* body, const char* name, const char* type, int dim,
                      const char* dof, const int count[3], const int cellcount[3],
                      const double spacing[3], const double scale[3], double radius,
                      double mass, double inertiabox, int equality, int rigid, int flatskin,
                      int elastic2d, const double pos[3], const double quat[4],
                      const double origin[3], const char* file, const mjVFS* vfs);
mjsPair* mjs_addPair(mjSpec* s, const mjsDefault* def);
mjsExclude* mjs_addExclude(mjSpec* s);
mjsEquality* mjs_addEquality(mjSpec* s, const mjsDefault* def);
mjsTendon* mjs_addTendon(mjSpec* s, const mjsDefault* def);
mjsWrap* mjs_wrapSite(mjsTendon* tendon, const char* name);
mjsWrap* mjs_wrapGeom(mjsTendon* tendon, const char* name, const char* sidesite);
mjsWrap* mjs_wrapJoint(mjsTendon* tendon, const char* name, double coef);
mjsWrap* mjs_wrapPulley(mjsTendon* tendon, double divisor);
mjsNumeric* mjs_addNumeric(mjSpec* s);
mjsText* mjs_addText(mjSpec* s);
mjsTuple* mjs_addTuple(mjSpec* s);
mjsKey* mjs_addKey(mjSpec* s);
mjsPlugin* mjs_addPlugin(mjSpec* s);
mjsDefault* mjs_addDefault(mjSpec* s, const char* classname, const mjsDefault* parent);
const char* mjs_setToMotor(mjsActuator* actuator);
const char* mjs_setToPosition(mjsActuator* actuator, double kp, double kv[1],
                              double dampratio[1], double timeconst[1], double inheritrange);
const char* mjs_setToIntVelocity(mjsActuator* actuator, double kp, double kv[1],
                                 double dampratio[1], double timeconst[1], double inheritrange);
const char* mjs_setToVelocity(mjsActuator* actuator, double kv);
const char* mjs_setToOrientation(mjsActuator* actuator, double kp, double kv[1],
                                 double dampratio[1], int ctrlspec);
const char* mjs_setToPID(mjsActuator* actuator, double kp, double kv[1], double dampratio[1],
                         double ki[1], double imax[1], double slewmax[1], double inheritrange,
                         int ctrlspec);
const char* mjs_setToDamper(mjsActuator* actuator, double kv);
const char* mjs_setToCylinder(mjsActuator* actuator, double timeconst,
                              double bias, double area, double diameter);
const char* mjs_setToMuscle(mjsActuator* actuator, double timeconst[2], double tausmooth,
                            double range[2], double force, double scale, double lmin,
                            double lmax, double vmax, double fpmax, double fvmax);
const char* mjs_setToAdhesion(mjsActuator* actuator, double gain);
const char* mjs_setToDCMotor(mjsActuator* actuator, double motorconst[2], double resistance,
                             double nominal[3], double saturation[3], double inductance[2],
                             double cogging[3], double controller[6], double thermal[6],
                             double lugre[5], int ctrlspec);
mjsMesh* mjs_addMesh(mjSpec* s, const mjsDefault* def);
mjsHField* mjs_addHField(mjSpec* s);
mjsSkin* mjs_addSkin(mjSpec* s);
mjsTexture* mjs_addTexture(mjSpec* s);
mjsMaterial* mjs_addMaterial(mjSpec* s, const mjsDefault* def);
int mjs_makeMesh(mjsMesh* mesh, mjtMeshBuiltin builtin, double* params, int nparams);
mjSpec* mjs_getSpec(const mjsElement* element);
mjSpec* mjs_getOriginSpec(const mjsElement* element);
mjsCompiler* mjs_getCompiler(const mjsElement* element);
mjSpec* mjs_findSpec(const mjSpec* spec, const char* name);
mjsBody* mjs_findBody(const mjSpec* s, const char* name);
mjsElement* mjs_findElement(const mjSpec* s, mjtObj type, const char* name);
mjsBody* mjs_findChild(const mjsBody* body, const char* name);
mjsBody* mjs_getParent(const mjsElement* element);
mjsFrame* mjs_getFrame(const mjsElement* element);
mjsFrame* mjs_findFrame(const mjSpec* s, const char* name);
mjsDefault* mjs_getDefault(const mjsElement* element);
mjsDefault* mjs_findDefault(const mjSpec* s, const char* classname);
mjsDefault* mjs_getSpecDefault(const mjSpec* s);
int mjs_getId(const mjsElement* element);
mjsElement* mjs_firstChild(const mjsBody* body, mjtObj type, int recurse);
mjsElement* mjs_nextChild(const mjsBody* body, const mjsElement* child, int recurse);
mjsElement* mjs_firstElement(const mjSpec* s, mjtObj type);
mjsElement* mjs_nextElement(const mjSpec* s, const mjsElement* element);
mjsElement* mjs_getWrapTarget(const mjsWrap* wrap);
mjsSite* mjs_getWrapSideSite(const mjsWrap* wrap);
double mjs_getWrapDivisor(const mjsWrap* wrap);
double mjs_getWrapCoef(const mjsWrap* wrap);
int mjs_setName(mjsElement* element, const char* name);
void mjs_setBuffer(mjByteVec* dest, const void* array, int size);
void mjs_setString(mjString* dest, const char* text);
void mjs_setStringVec(mjStringVec* dest, const char* text);
mjtBool mjs_setInStringVec(mjStringVec* dest, int i, const char* text);
void mjs_appendString(mjStringVec* dest, const char* text);
void mjs_setInt(mjIntVec* dest, const int* array, int size);
void mjs_appendIntVec(mjIntVecVec* dest, const int* array, int size);
void mjs_setFloat(mjFloatVec* dest, const float* array, int size);
void mjs_appendFloatVec(mjFloatVecVec* dest, const float* array, int size);
void mjs_setDouble(mjDoubleVec* dest, const double* array, int size);
void mjs_setPluginAttributes(mjsPlugin* plugin, void* attributes);
mjString* mjs_getName(mjsElement* element);
const char* mjs_getString(const mjString* source);
const double* mjs_getDouble(const mjDoubleVec* source, int* size);
int mjs_getWrapNum(const mjsTendon* tendonspec);
mjsWrap* mjs_getWrap(const mjsTendon* tendonspec, int i);
const void* mjs_getPluginAttributes(const mjsPlugin* plugin);
void mjs_setDefault(mjsElement* element, const mjsDefault* def);
int mjs_setFrame(mjsElement* dest, mjsFrame* frame);
const char* mjs_resolveOrientation(double quat[4], mjtByte degree, const char* sequence,
                                   const mjsOrientation* orientation);
mjsFrame* mjs_bodyToFrame(mjsBody** body);
void mjs_setUserValue(mjsElement* element, const char* key, const void* data);
void mjs_setUserValueWithCleanup(mjsElement* element, const char* key,
                                 const void* data,
                                 void (*cleanup)(const void*));
const void* mjs_getUserValue(mjsElement* element, const char* key);
void mjs_deleteUserValue(mjsElement* element, const char* key);
int mjs_sensorDim(const mjsSensor* sensor);
void mjs_defaultSpec(mjSpec* spec);
void mjs_defaultOrientation(mjsOrientation* orient);
void mjs_defaultBody(mjsBody* body);
void mjs_defaultFrame(mjsFrame* frame);
void mjs_defaultJoint(mjsJoint* joint);
void mjs_defaultGeom(mjsGeom* geom);
void mjs_defaultSite(mjsSite* site);
void mjs_defaultCamera(mjsCamera* camera);
void mjs_defaultLight(mjsLight* light);
void mjs_defaultFlex(mjsFlex* flex);
void mjs_defaultMesh(mjsMesh* mesh);
void mjs_defaultHField(mjsHField* hfield);
void mjs_defaultSkin(mjsSkin* skin);
void mjs_defaultTexture(mjsTexture* texture);
void mjs_defaultMaterial(mjsMaterial* material);
void mjs_defaultPair(mjsPair* pair);
void mjs_defaultEquality(mjsEquality* equality);
void mjs_defaultTendon(mjsTendon* tendon);
void mjs_defaultActuator(mjsActuator* actuator);
void mjs_defaultSensor(mjsSensor* sensor);
void mjs_defaultNumeric(mjsNumeric* numeric);
void mjs_defaultText(mjsText* text);
void mjs_defaultTuple(mjsTuple* tuple);
void mjs_defaultKey(mjsKey* key);
void mjs_defaultPlugin(mjsPlugin* plugin);
mjsBody* mjs_asBody(mjsElement* element);
mjsGeom* mjs_asGeom(mjsElement* element);
mjsJoint* mjs_asJoint(mjsElement* element);
mjsSite* mjs_asSite(mjsElement* element);
mjsCamera* mjs_asCamera(mjsElement* element);
mjsLight* mjs_asLight(mjsElement* element);
mjsFrame* mjs_asFrame(mjsElement* element);
mjsActuator* mjs_asActuator(mjsElement* element);
mjsSensor* mjs_asSensor(mjsElement* element);
mjsFlex* mjs_asFlex(mjsElement* element);
mjsPair* mjs_asPair(mjsElement* element);
mjsEquality* mjs_asEquality(mjsElement* element);
mjsExclude* mjs_asExclude(mjsElement* element);
mjsTendon* mjs_asTendon(mjsElement* element);
mjsNumeric* mjs_asNumeric(mjsElement* element);
mjsText* mjs_asText(mjsElement* element);
mjsTuple* mjs_asTuple(mjsElement* element);
mjsKey* mjs_asKey(mjsElement* element);
mjsMesh* mjs_asMesh(mjsElement* element);
mjsHField* mjs_asHField(mjsElement* element);
mjsSkin* mjs_asSkin(mjsElement* element);
mjsTexture* mjs_asTexture(mjsElement* element);
mjsMaterial* mjs_asMaterial(mjsElement* element);
mjsPlugin* mjs_asPlugin(mjsElement* element);
// NOLINTEND