mujoco

# Copyright 2024 DeepMind Technologies Limited
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ==============================================================================
"""Tests for mjSpec bindings."""

import gc
import inspect
import math
import os
import textwrap
import typing
import zipfile  # pylint: disable=unused-import

from absl import flags
from absl.testing import absltest
from etils import epath
import mujoco
import numpy as np


def get_linenumber():
  cf = inspect.currentframe()
  return cf.f_back.f_lineno


class SpecsTest(absltest.TestCase):
  def setUp(self):
    super().setUp()
    # Mark flags as parsed to avoid pytest errors about unparsed flags.
    # This is needed for `create_tempdir()` calls below.
    flags.FLAGS.mark_as_parsed()

  def test_typing(self):
    spec = mujoco.MjSpec()
    self.assertIsInstance(spec, mujoco.MjSpec)
    self.assertIsInstance(spec.worldbody, mujoco.MjsBody)
    self.assertIsInstance(spec.worldbody, typing.get_args(mujoco.MjStruct))

  def test_timer(self):
    xml = """
    <mujoco>
      <asset>
        <texture name="grid" type="2d" builtin="checker" width="300" height="300" rgb1=".1 .2 .3" rgb2=".2 .3 .4"/>
        <material name="grid" texture="grid"/>
      </asset>
      <worldbody>
        <geom type="plane" size="1 1 1" material="grid"/>
      </worldbody>
    </mujoco>
    """
    spec = mujoco.MjSpec.from_string(xml)
    spec.compile()
    self.assertGreater(spec.timer[mujoco.mjtCTimer.mjCTIMER_TOTAL], 0)
    self.assertGreater(spec.timer[mujoco.mjtCTimer.mjCTIMER_ASSETS], 0)
    self.assertGreater(spec.timer[mujoco.mjtCTimer.mjCTIMER_TEXTURE], 0)

  def test_basic(self):
    # Create a spec.
    spec = mujoco.MjSpec()

    # Check that euler sequence order is set correctly.
    self.assertEqual(spec.compiler.eulerseq[0], 'x')
    spec.compiler.eulerseq = ['z', 'y', 'x']
    self.assertEqual(spec.compiler.eulerseq[0], 'z')

    # Change single elements of euler sequence.
    spec.compiler.eulerseq[0] = 'y'
    spec.compiler.eulerseq[1] = 'z'
    self.assertEqual(spec.compiler.eulerseq[0], 'y')
    self.assertEqual(spec.compiler.eulerseq[1], 'z')

    # eulerseq is iterable
    self.assertEqual('yzx', ''.join(spec.compiler.eulerseq))

    # supports `len`
    self.assertLen(spec.compiler.eulerseq, 3)

    # field checks for out-of-bound access on read and on write
    with self.assertRaises(IndexError):
      spec.compiler.eulerseq[3] = 'x'

    with self.assertRaises(IndexError):
      spec.compiler.eulerseq[-1] = 'x'

    # Add a body, check that it has default orientation.
    body = spec.worldbody.add_body()
    self.assertEqual(body.name, '')
    np.testing.assert_array_equal(body.quat, [1, 0, 0, 0])

    # Change the name of the body and read it back twice.
    body.name = 'foobar'
    self.assertEqual(body.name, 'foobar')
    body.name = 'baz'
    self.assertEqual(body.name, 'baz')

    # Change the position of the body and read it back.
    body.pos = [4, 2, 3]
    np.testing.assert_array_equal(body.pos, [4, 2, 3])
    self.assertEqual(body.pos.shape, (3,))

    # Change single element of position.
    body.pos[0] = 1
    np.testing.assert_array_equal(body.pos, [1, 2, 3])

    # Change the orientation of the body and read it back.
    body.quat = [0, 1, 0, 0]
    np.testing.assert_array_equal(body.quat, [0, 1, 0, 0])
    self.assertEqual(body.quat.shape, (4,))

    # Add a site to the body with user data and read it back.
    site = body.add_site()
    site.name = 'sitename'
    site.type = mujoco.mjtGeom.mjGEOM_BOX
    site.userdata = [7, 2, 3, 4, 5, 6]
    self.assertEqual(site.name, 'sitename')
    self.assertEqual(site.type, mujoco.mjtGeom.mjGEOM_BOX)
    np.testing.assert_array_equal(site.userdata, [7, 2, 3, 4, 5, 6])

    # Modify a single element of userdata.
    site.userdata[0] = 1
    np.testing.assert_array_equal(site.userdata, [1, 2, 3, 4, 5, 6])

    # Compile the spec and check for expected values in the model.
    model = spec.compile()
    data = mujoco.MjData(model)
    mujoco.mj_forward(model, data)
    self.assertEqual(model.nbody, 2)  # 2 bodies, including the world body
    np.testing.assert_array_equal(model.bind(body).pos, [1, 2, 3])
    np.testing.assert_array_equal(model.bind(body).quat, [0, 1, 0, 0])
    np.testing.assert_array_equal(data.bind(body).xpos, [1, 2, 3])
    self.assertEqual(model.nsite, 1)
    self.assertEqual(model.nuser_site, 6)
    np.testing.assert_array_equal(model.site_user[0], [1, 2, 3, 4, 5, 6])

    xml = textwrap.dedent("""\
        <mujoco model="MuJoCo Model">
          <compiler angle="radian"/>

          <size nuser_site="6"/>

          <worldbody>
            <body name="baz" pos="1 2 3" quat="0 1 0 0">
              <site name="sitename" type="box" user="1 2 3 4 5 6"/>
            </body>
          </worldbody>
        </mujoco>
    """)
    self.assertEqual(spec.to_xml(), xml)

  def test_resolve_orientation(self):
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body(euler=[0, 0, 90])
    quat = mujoco.MjSpec.resolve_orientation(
        degree=spec.compiler.degree,
        sequence=spec.compiler.eulerseq,
        orientation=body.alt,
    )
    np.testing.assert_array_almost_equal(
        quat, [math.sqrt(2) / 2, 0, 0, math.sqrt(2) / 2]
    )

  def test_kwarg(self):
    # Create a spec.
    spec = mujoco.MjSpec()

    # Add material.
    material = spec.add_material(texrepeat=[1, 2], emission=-1)
    np.testing.assert_array_equal(material.texrepeat, [1, 2])
    self.assertEqual(material.emission, -1)

    # Add mesh.
    mesh = spec.add_mesh(refpos=[1, 2, 3])
    np.testing.assert_array_equal(mesh.refpos, [1, 2, 3])

    # Add pair.
    pair = spec.add_pair(gap=0.1)
    self.assertEqual(pair.gap, 0.1)

    # Add equality.
    equality = spec.add_equality(objtype=mujoco.mjtObj.mjOBJ_SITE)
    self.assertEqual(equality.objtype, mujoco.mjtObj.mjOBJ_SITE)

    # Add tendon.
    tendon = spec.add_tendon(stiffness=2, springlength=[0.1, 0.2])
    np.testing.assert_array_equal(tendon.stiffness, [2, 0, 0])
    np.testing.assert_array_equal(tendon.springlength, [0.1, 0.2])

    # Add actuator.
    actuator = spec.add_actuator(actdim=10, ctrlrange=[-1, 10])
    self.assertEqual(actuator.actdim, 10)
    np.testing.assert_array_equal(actuator.ctrlrange, [-1, 10])

    # Add skin.
    skin = spec.add_skin(inflate=2.0, vertid=[[1, 1], [2, 2]])
    self.assertEqual(skin.inflate, 2.0)
    np.testing.assert_array_equal(skin.vertid, [[1, 1], [2, 2]])

    # Add texture.
    texture = spec.add_texture(builtin=0, nchannel=3)
    self.assertEqual(texture.builtin, 0)
    self.assertEqual(texture.nchannel, 3)

    # Add text.
    text = spec.add_text(data='data', info='info')
    self.assertEqual(text.data, 'data')
    self.assertEqual(text.info, 'info')

    # Add tuple.
    tuple_ = spec.add_tuple(objprm=[2.0, 3.0, 5.0], objname=['obj'])
    np.testing.assert_array_equal(tuple_.objprm, [2.0, 3.0, 5.0])
    self.assertEqual(tuple_.objname[0], 'obj')

    # Add flex.
    flex = spec.add_flex(friction=[1, 2, 3], texcoord=[1.0, 2.0, 3.0])
    np.testing.assert_array_equal(flex.friction, [1, 2, 3])
    np.testing.assert_array_equal(flex.texcoord, [1.0, 2.0, 3.0])

    # Add hfield.
    hfield = spec.add_hfield(nrow=2, content_type='type')
    self.assertEqual(hfield.nrow, 2)
    self.assertEqual(hfield.content_type, 'type')

    # Add key.
    key = spec.add_key(time=1.2, qpos=[1.0, 2.0])
    self.assertEqual(key.time, 1.2)
    np.testing.assert_array_equal(key.qpos, [1.0, 2.0])

    # Add numeric.
    numeric = spec.add_numeric(data=[1.0, 1.1, 1.2], size=2)
    np.testing.assert_array_equal(numeric.data, [1.0, 1.1, 1.2])
    self.assertEqual(numeric.size, 2)

    # Add exclude.
    exclude = spec.add_exclude(bodyname2='body2')
    self.assertEqual(exclude.bodyname2, 'body2')

    # Add sensor.
    sensor = spec.add_sensor(
        needstage=mujoco.mjtStage.mjSTAGE_ACC, objtype=mujoco.mjtObj.mjOBJ_SITE
    )
    self.assertEqual(sensor.needstage, mujoco.mjtStage.mjSTAGE_ACC)
    self.assertEqual(sensor.objtype, mujoco.mjtObj.mjOBJ_SITE)

    # Add plugin.
    plugin = spec.add_plugin(
        name='instance_name',
        plugin_name='mujoco.plugin',
        active=True,
        info='info',
    )
    self.assertEqual(plugin.name, 'instance_name')
    self.assertEqual(plugin.plugin_name, 'mujoco.plugin')
    self.assertEqual(plugin.active, True)
    self.assertEqual(plugin.info, 'info')

    # Add a body.
    body = spec.worldbody.add_body(
        name='body', pos=[1, 2, 3], quat=[0, 0, 0, 1]
    )
    self.assertEqual(body.name, 'body')
    np.testing.assert_array_equal(body.pos, [1, 2, 3])
    np.testing.assert_array_equal(body.quat, [0, 0, 0, 1])

    # Add a body with a plugin.
    body_with_plugin = spec.worldbody.add_body(plugin=plugin)
    self.assertEqual(body_with_plugin.plugin.name, 'instance_name')
    self.assertEqual(body_with_plugin.plugin.plugin_name, 'mujoco.plugin')
    self.assertEqual(body_with_plugin.plugin.active, True)
    self.assertEqual(body_with_plugin.plugin.info, 'info')

    # Add a geom.
    geom = body.add_geom(
        name='geom',
        pos=[3, 2, 1],
        fromto=[1, 2, 3, 4, 5, 6],
        contype=3,
    )

    self.assertEqual(geom.name, 'geom')
    np.testing.assert_array_equal(geom.pos, [3, 2, 1])
    np.testing.assert_array_equal(geom.fromto, [1, 2, 3, 4, 5, 6])
    self.assertEqual(geom.contype, 3)

    # Add a site to the body with user data and read it back.
    site = body.add_site(
        name='sitename',
        pos=[0, 1, 2],
        quat=[1, 0, 0, 0],
        fromto=[0, 1, 2, 3, 4, 5],
        size=[3, 2, 1],
        type=mujoco.mjtGeom.mjGEOM_BOX,
        material='material',
        group=7,
        rgba=[1, 1, 1, 0.5],
        userdata=[1, 2, 3, 4, 5, 6],
        info='info',
    )
    self.assertEqual(site.name, 'sitename')
    np.testing.assert_array_equal(site.pos, [0, 1, 2])
    np.testing.assert_array_equal(site.quat, [1, 0, 0, 0])
    np.testing.assert_array_equal(site.fromto, [0, 1, 2, 3, 4, 5])
    np.testing.assert_array_equal(site.size, [3, 2, 1])
    self.assertEqual(site.type, mujoco.mjtGeom.mjGEOM_BOX)
    self.assertEqual(site.material, 'material')
    self.assertEqual(site.group, 7)
    np.testing.assert_array_equal(site.rgba, [1, 1, 1, 0.5])
    np.testing.assert_array_equal(site.userdata, [1, 2, 3, 4, 5, 6])
    self.assertEqual(site.info, 'info')

    # Add camera.
    cam = body.add_camera(
        proj=mujoco.mjtProjection.mjPROJ_ORTHOGRAPHIC, resolution=[10, 20]
    )
    self.assertEqual(cam.proj, 1)
    np.testing.assert_array_equal(cam.resolution, [10, 20])

    # Add frame.
    framea0 = body.add_frame(name='framea', pos=[1, 2, 3], quat=[0, 0, 0, 1])
    np.testing.assert_array_equal(framea0.pos, [1, 2, 3])
    np.testing.assert_array_equal(framea0.quat, [0, 0, 0, 1])

    frameb0 = body.add_frame(
        framea0, name='frameb', pos=[4, 5, 6], quat=[0, 1, 0, 0]
    )

    framea1 = body.first_frame()
    frameb1 = body.next_frame(framea1)

    self.assertEqual(framea1.name, framea0.name)
    self.assertEqual(frameb1.name, frameb0.name)
    np.testing.assert_array_equal(framea1.pos, framea0.pos)
    np.testing.assert_array_equal(framea1.quat, framea0.quat)
    np.testing.assert_array_equal(frameb1.pos, frameb0.pos)
    np.testing.assert_array_equal(frameb1.quat, frameb0.quat)

    # Add frame in frame.
    framec0 = frameb0.add_frame(name='framec', pos=[7, 8, 9], quat=[0, 0, 0, 1])
    self.assertEqual(framec0.name, 'framec')
    self.assertEqual(framec0.parent, frameb0.parent)
    self.assertEqual(framec0.frame, frameb0)
    np.testing.assert_array_equal(framec0.pos, [7, 8, 9])
    np.testing.assert_array_equal(framec0.quat, [0, 0, 0, 1])

    # Add joint.
    joint = body.add_joint(type=mujoco.mjtJoint.mjJNT_HINGE, axis=[0, 1, 0])
    self.assertEqual(joint.type, mujoco.mjtJoint.mjJNT_HINGE)
    np.testing.assert_array_equal(joint.axis, [0, 1, 0])

    # Add freejoint.
    freejoint = body.add_freejoint()
    self.assertEqual(freejoint.type, mujoco.mjtJoint.mjJNT_FREE)
    freejoint_align = body.add_freejoint(align=True)
    self.assertEqual(freejoint_align.align, True)

    with self.assertRaises(TypeError) as cm:
      body.add_freejoint(axis=[1, 2, 3])
    self.assertEqual(
        str(cm.exception),
        'Invalid axis keyword argument. Valid options are: align, group, name.',
    )

    # Add light.
    light = body.add_light(attenuation=[1, 2, 3])
    np.testing.assert_array_equal(light.attenuation, [1, 2, 3])

    # Add light in a frame.
    light_in_frame = framea0.add_light(cutoff=10)
    self.assertEqual(light_in_frame.cutoff, 10)
    self.assertEqual(light_in_frame.parent, framea0.parent)
    self.assertEqual(light_in_frame.frame, framea0)

    # Invalid input for valid keyword argument.
    with self.assertRaises(TypeError):
      body.add_geom(pos='pos')

    with self.assertRaises(ValueError) as cm:
      body.add_geom(pos=[0, 1])
    self.assertEqual(
        str(cm.exception),
        'pos should be a list/array of size 3.',
    )

    with self.assertRaises(TypeError):
      body.add_geom(type='type')

    with self.assertRaises(TypeError):
      body.add_geom(userdata='')

    # Invalid keyword argument.
    with self.assertRaises(TypeError):
      body.add_geom(vel='vel')

    # Orientation keyword arguments.
    geom_axisangle = body.add_geom(axisangle=[1, 2, 3, 4])
    geom_xyaxes = body.add_geom(xyaxes=[1, 2, 3, 4, 5, 6])
    geom_zaxis = body.add_geom(zaxis=[1, 2, 3])
    geom_euler = body.add_geom(euler=[1, 2, 3])

    self.assertEqual(
        geom_axisangle.alt.type, mujoco.mjtOrientation.mjORIENTATION_AXISANGLE
    )
    self.assertEqual(
        geom_xyaxes.alt.type, mujoco.mjtOrientation.mjORIENTATION_XYAXES
    )
    self.assertEqual(
        geom_zaxis.alt.type, mujoco.mjtOrientation.mjORIENTATION_ZAXIS
    )
    self.assertEqual(
        geom_euler.alt.type, mujoco.mjtOrientation.mjORIENTATION_EULER
    )
    np.testing.assert_array_equal(geom_axisangle.alt.axisangle, [1, 2, 3, 4])
    np.testing.assert_array_equal(geom_xyaxes.alt.xyaxes, [1, 2, 3, 4, 5, 6])
    np.testing.assert_array_equal(geom_zaxis.alt.zaxis, [1, 2, 3])
    np.testing.assert_array_equal(geom_euler.alt.euler, [1, 2, 3])

    body_iaxisangle = spec.worldbody.add_body(iaxisangle=[1, 2, 3, 4])
    body_ixyaxes = spec.worldbody.add_body(ixyaxes=[1, 2, 3, 4, 5, 6])
    body_izaxis = spec.worldbody.add_body(izaxis=[1, 2, 3])
    body_ieuler = spec.worldbody.add_body(ieuler=[1, 2, 3])
    body_euler_ieuler = spec.worldbody.add_body(
        euler=[1, 2, 3], ieuler=[4, 5, 6]
    )
    np.testing.assert_array_equal(body_iaxisangle.ialt.axisangle, [1, 2, 3, 4])
    np.testing.assert_array_equal(body_ixyaxes.ialt.xyaxes, [1, 2, 3, 4, 5, 6])
    np.testing.assert_array_equal(body_izaxis.ialt.zaxis, [1, 2, 3])
    np.testing.assert_array_equal(body_ieuler.ialt.euler, [1, 2, 3])
    np.testing.assert_array_equal(body_euler_ieuler.alt.euler, [1, 2, 3])
    np.testing.assert_array_equal(body_euler_ieuler.ialt.euler, [4, 5, 6])

    # Test invalid orientation keyword arguments.
    with self.assertRaises(ValueError) as cm:
      body.add_geom(axisangle=[1, 2, 3])
    self.assertEqual(
        str(cm.exception),
        'axisangle should be a list/array of size 4.',
    )
    with self.assertRaises(ValueError) as cm:
      body.add_geom(xyaxes=[1, 2, 3, 4, 5])
    self.assertEqual(
        str(cm.exception),
        'xyaxes should be a list/array of size 6.',
    )
    with self.assertRaises(ValueError) as cm:
      body.add_geom(zaxis=[1, 2, 3, 4])
    self.assertEqual(
        str(cm.exception),
        'zaxis should be a list/array of size 3.',
    )
    with self.assertRaises(ValueError) as cm:
      body.add_geom(euler=[1])
    self.assertEqual(
        str(cm.exception),
        'euler should be a list/array of size 3.',
    )
    with self.assertRaises(ValueError) as cm:
      body.add_geom(axisangle=[1, 2, 3, 4], euler=[1, 2, 3])
    self.assertEqual(
        str(cm.exception),
        'Only one of: axisangle, xyaxes, zaxis, or euler can be set.',
    )
    with self.assertRaises(ValueError) as cm:
      spec.worldbody.add_body(iaxisangle=[1, 2, 3, 4], ieuler=[1, 2, 3])
    self.assertEqual(
        str(cm.exception),
        'Only one of: iaxisangle, ixyaxes, izaxis, or ieuler can be set.',
    )

  def test_size_kwarg_variable_length(self):
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body()

    geom_size1 = body.add_geom(size=[0.5])
    np.testing.assert_array_equal(geom_size1.size, [0.5, 0, 0])

    geom_size2 = body.add_geom(size=[0.5, 0.3])
    np.testing.assert_array_equal(geom_size2.size, [0.5, 0.3, 0])

    geom_size3 = body.add_geom(size=[0.5, 0.3, 0.1])
    np.testing.assert_array_equal(geom_size3.size, [0.5, 0.3, 0.1])

    site_size1 = body.add_site(size=[0.2])
    np.testing.assert_array_equal(site_size1.size, [0.2, 0, 0])

    site_size2 = body.add_site(size=[0.2, 0.1])
    np.testing.assert_array_equal(site_size2.size, [0.2, 0.1, 0])

    site_size3 = body.add_site(size=[0.2, 0.1, 0.05])
    np.testing.assert_array_equal(site_size3.size, [0.2, 0.1, 0.05])

    with self.assertRaises(ValueError) as cm:
      body.add_geom(size=[])
    self.assertEqual(
        str(cm.exception),
        'size should be a list/array of size 1 to 3.',
    )

    with self.assertRaises(ValueError) as cm:
      body.add_geom(size=[1, 2, 3, 4])
    self.assertEqual(
        str(cm.exception),
        'size should be a list/array of size 1 to 3.',
    )

  def test_load_xml(self):
    file_path = epath.resource_path("mujoco") / "testdata" / "model.xml"
    filename = file_path.as_posix()
    state_type = mujoco.mjtState.mjSTATE_INTEGRATION

    # Load from file.
    spec1 = mujoco.MjSpec.from_file(filename)
    model1 = spec1.compile()
    data1 = mujoco.MjData(model1)
    mujoco.mj_step(model1, data1)
    size1 = mujoco.mj_stateSize(model1, state_type)
    state1 = np.empty(size1, np.float64)
    mujoco.mj_getState(model1, data1, state1, state_type)

    # Load from string.
    with open(filename, 'r') as file:
      spec2 = mujoco.MjSpec.from_string(file.read().rstrip())
    model2 = spec2.compile()
    data2 = mujoco.MjData(model2)
    mujoco.mj_step(model2, data2)
    size2 = mujoco.mj_stateSize(model2, state_type)
    state2 = np.empty(size2, np.float64)
    mujoco.mj_getState(model2, data2, state2, state_type)

    # Check that the state is the same.
    np.testing.assert_array_equal(state1, state2)

  def test_parses_urdf(self):
    file_path = epath.resource_path("mujoco") / "testdata" / "model.urdf"
    filename = file_path.as_posix()

    # Load from file.
    spec1 = mujoco.MjSpec.from_file(filename)
    self.assertIsNotNone(spec1)

  def test_make_mesh(self):
    spec = mujoco.MjSpec()

    mesh = spec.add_mesh(name='wedge')
    mesh.make_wedge(resolution=[25, 25], fov=[90, 45], gamma=0)

    mesh = spec.add_mesh(name='prism')
    mesh.make_cone(nedge=5, radius=1)

    mesh = spec.add_mesh(name='cone')
    mesh.make_cone(nedge=6, radius=0)

    mesh = spec.add_mesh(name='hemisphere')
    mesh.make_hemisphere(resolution=4)

    mesh = spec.add_mesh(name='sphere')
    mesh.make_sphere(subdivision=2)

    mesh = spec.add_mesh(name='supertorus')
    mesh.make_supertorus(resolution=10, radius=0.5, s=1, t=1)

    mesh = spec.add_mesh(name='supersphere')
    mesh.make_supersphere(resolution=20, e=2, n=1)

    model = spec.compile()
    self.assertEqual(model.nmesh, 7)
    self.assertEqual(model.mesh_vertnum[0], 25 * 25)
    self.assertEqual(model.mesh_vertnum[1], 10)
    self.assertEqual(model.mesh_vertnum[2], 7)
    self.assertEqual(model.mesh_vertnum[3], 2 * (4 + 1) * (4 + 2) + 2)
    self.assertEqual(model.mesh_vertnum[4], 2 + 10 * 4**2)
    self.assertEqual(model.mesh_vertnum[5], 100)
    self.assertEqual(model.mesh_vertnum[6], 20 * (20 -1) + 2)

  def test_compile_errors_with_line_info(self):
    spec = mujoco.MjSpec()

    added_on_line = get_linenumber() + 1
    geom = spec.worldbody.add_geom()
    geom.name = 'MyGeom'
    geom.info = f'geom added on line {added_on_line}'

    # Try to compile, get error.
    expected_error = (
        'Error: size 0 must be positive in geom\n'
        + f"Element name 'MyGeom', id 0, geom added on line {added_on_line}"
    )
    with self.assertRaisesRegex(ValueError, expected_error):
      spec.compile()

  def test_compile_warnings(self):
    xml = """
    <mujoco>
      <worldbody>
        <flexcomp name="my_flex" type="grid" count="3 3 1" spacing=".05 .05 .05" radius=".01" dim="2"/>
      </worldbody>
    </mujoco>
    """
    spec = mujoco.MjSpec.from_string(xml)
    with self.assertWarnsRegex(UserWarning, 'is not rigid'):
      spec.compile()

  def test_recompile(self):
    # Create a spec.
    spec = mujoco.MjSpec()

    # Add movable body1.
    body1 = spec.worldbody.add_body()
    geom = body1.add_geom()
    geom.size[0] = 1
    geom.pos = [1, 1, 0]
    joint = body1.add_joint()
    joint.type = mujoco.mjtJoint.mjJNT_BALL

    # Compile model, make data.
    model = spec.compile()
    data = mujoco.MjData(model)

    # Simulate for 1 second.
    while data.time < 1:
      mujoco.mj_step(model, data)

    # Add movable body2.
    body2 = spec.worldbody.add_body()
    body2.pos[1] = 3
    geom = body2.add_geom()
    geom.size[0] = 1
    geom.pos = [0, 1, 0]
    joint = body2.add_joint()
    joint.type = mujoco.mjtJoint.mjJNT_BALL

    # Recompile model and data while maintaining the state.
    model_new, data_new = spec.recompile(model, data)

    # Check that the state is preserved.
    np.testing.assert_array_equal(model_new.body_pos[1], model.body_pos[1])
    np.testing.assert_array_equal(data_new.qpos[:4], data.qpos)
    np.testing.assert_array_equal(data_new.qvel[:3], data.qvel)

  def test_uncompiled_spec_can_be_written(self):
    spec = mujoco.MjSpec()
    spec.to_xml()

  def test_modelname_default_class(self):
    xml = textwrap.dedent("""\
        <mujoco model="test">
          <compiler angle="radian"/>

          <default>
            <geom size="2 0 0"/>
            <default class="def1">
              <geom size="3 0 0"/>
            </default>
          </default>

          <worldbody>
            <geom class="def1"/>
            <geom/>
          </worldbody>
        </mujoco>
    """)

    spec = mujoco.MjSpec()
    spec.modelname = 'test'

    main = spec.default
    main.geom.size[0] = 2

    def1 = spec.add_default('def1', main)
    def1.geom.size[0] = 3

    spec.worldbody.add_geom(def1)
    spec.worldbody.add_geom(main)

    spec.compile()
    self.assertEqual(spec.to_xml(), xml)
    spec = mujoco.MjSpec()
    spec.modelname = 'test'

    main = spec.default
    main.geom.size[0] = 2
    def1 = spec.add_default('def1', main)
    def1.geom.size[0] = 3

    geom1 = spec.worldbody.add_geom(def1)
    geom2 = spec.worldbody.add_geom()
    self.assertEqual(geom1.classname.name, 'def1')
    self.assertEqual(geom2.classname.name, 'main')

    spec.compile()
    self.assertEqual(spec.to_xml(), xml)

    spec = mujoco.MjSpec()
    spec.modelname = 'test'

    main = spec.default
    main.geom.size[0] = 2
    def1 = spec.add_default('def1', main)
    def1.geom.size[0] = 3

    geom1 = spec.worldbody.add_geom(size=[3, 0, 0])
    geom2 = spec.worldbody.add_geom(size=[2, 0, 0])
    geom1.classname = def1
    geom2.classname = main  # actually redundant, since main is always applied

    spec.compile()
    self.assertEqual(spec.to_xml(), xml)

    # test delete default
    def1 = spec.find_default('def1')
    spec.delete(def1)
    def1 = spec.find_default('def1')
    self.assertIsNone(def1)

  def test_element_list(self):
    spec = mujoco.MjSpec()
    sensor1 = spec.add_sensor()
    sensor2 = spec.add_sensor()
    sensor3 = spec.add_sensor()
    actuator1 = spec.add_actuator()
    actuator2 = spec.add_actuator()
    actuator3 = spec.add_actuator()
    sensor1.name = 'sensor1'
    sensor2.name = 'sensor2'
    sensor3.name = 'sensor3'
    actuator1.name = 'actuator1'
    actuator2.name = 'actuator2'
    actuator3.name = 'actuator3'
    self.assertLen(spec.sensors, 3)
    self.assertLen(spec.actuators, 3)
    self.assertEqual(spec.sensors[0].name, 'sensor1')
    self.assertEqual(spec.sensors[1].name, 'sensor2')
    self.assertEqual(spec.sensors[2].name, 'sensor3')
    self.assertEqual(spec.actuators[0].name, 'actuator1')
    self.assertEqual(spec.actuators[1].name, 'actuator2')
    self.assertEqual(spec.actuators[2].name, 'actuator3')
    self.assertEqual(spec.sensor('sensor1'), sensor1)
    self.assertEqual(spec.sensor('sensor2'), sensor2)
    self.assertEqual(spec.sensor('sensor3'), sensor3)
    self.assertEqual(spec.actuator('actuator1'), actuator1)
    self.assertEqual(spec.actuator('actuator2'), actuator2)
    self.assertEqual(spec.actuator('actuator3'), actuator3)

  def test_body_list(self):
    main_xml = """
    <mujoco>
      <worldbody>
        <body name="body1">
          <site name="site1"/>
          <body name="body2">
            <site name="site4"/>
          </body>
          <geom name="geom1" size="1"/>
          <geom name="geom2" size="1"/>
          <site name="site2"/>
          <site name="site3"/>
          <geom name="geom3" size="1"/>
        </body>
        <body name="body3">
          <site name="site5"/>
        </body>
      </worldbody>
    </mujoco>
    """
    spec = mujoco.MjSpec.from_string(main_xml)
    bodytype = mujoco.mjtObj.mjOBJ_BODY
    self.assertLen(spec.bodies, 4)
    self.assertLen(spec.sites, 5)
    self.assertLen(spec.worldbody.find_all('body'), 3)
    self.assertLen(spec.worldbody.find_all('site'), 5)
    self.assertLen(spec.worldbody.find_all('geom'), 3)
    self.assertEqual(spec.bodies[1].name, 'body1')
    self.assertEqual(spec.bodies[2].name, 'body2')
    self.assertEqual(spec.bodies[3].name, 'body3')
    self.assertEqual(spec.bodies[1].parent, spec.bodies[0])
    self.assertEqual(spec.bodies[2].parent, spec.bodies[1])
    self.assertEqual(spec.bodies[3].parent, spec.bodies[0])
    self.assertLen(spec.worldbody.find_all(bodytype), 3)
    self.assertLen(spec.bodies[1].find_all(bodytype), 1)
    self.assertEmpty(spec.bodies[3].find_all(bodytype))
    self.assertEqual(spec.bodies[1].find_all('body')[0].name, 'body2')
    self.assertEmpty(spec.bodies[3].find_all('body'))
    self.assertEmpty(spec.bodies[2].find_all('body'))
    for i, body in enumerate(spec.worldbody.find_all('body')):
      self.assertEqual(body.name, 'body' + str(i + 1))
    for i, site in enumerate(spec.worldbody.find_all('site')):
      self.assertEqual(site.name, 'site' + str(i + 1))
    self.assertLen(spec.bodies[1].sites, 3)
    self.assertLen(spec.bodies[2].sites, 1)
    self.assertLen(spec.bodies[3].sites, 1)
    self.assertEqual(spec.bodies[1].sites[0].name, 'site1')
    self.assertEqual(spec.bodies[1].sites[1].name, 'site2')
    self.assertEqual(spec.bodies[1].sites[2].name, 'site3')
    self.assertEqual(spec.bodies[2].sites[0].name, 'site4')
    self.assertEqual(spec.bodies[3].sites[0].name, 'site5')
    for body in spec.bodies:
      for site in body.sites:
        self.assertEqual(site.parent, body)
    with self.assertRaises(ValueError) as cm:
      spec.worldbody.find_all('actuator')
    self.assertEqual(
        str(cm.exception),
        'body.find_all supports the types: body, frame, geom, site,'
        ' joint, light, camera.',
    )
    body3 = spec.worldbody.find_all('body')[2]
    body3.name = 'body3_new'
    self.assertEqual(spec.bodies[3].name, 'body3_new')

  def test_geom_list(self):
    main_xml = """
    <mujoco>
      <worldbody>
        <body name="body1"/>
      </worldbody>
    </mujoco>
    """
    spec = mujoco.MjSpec.from_string(main_xml)
    geom1 = spec.worldbody.add_geom(name='geom1')
    geom2 = spec.worldbody.add_geom(name='geom2')
    geom3 = spec.body('body1').add_geom(name='geom3')

    self.assertEqual(spec.geoms, [geom1, geom2, geom3])
    self.assertEqual(spec.geom('geom1'), geom1)
    self.assertEqual(spec.geom('geom2'), geom2)
    self.assertEqual(spec.geom('geom3'), geom3)

  def test_iterators(self):
    spec = mujoco.MjSpec()
    geom1 = spec.worldbody.add_geom()
    geom2 = spec.worldbody.add_geom()
    geom3 = spec.worldbody.add_geom()
    geom1.name = 'geom1'
    geom2.name = 'geom2'
    geom3.name = 'geom3'
    geom = spec.worldbody.first_geom()
    i = 1
    while geom:
      self.assertEqual(geom.name, 'geom' + str(i))
      geom = spec.worldbody.next_geom(geom)
      i += 1

  def test_assets(self):
    cube = """
      v -1 -1  1
      v  1 -1  1
      v -1  1  1
      v  1  1  1
      v -1  1 -1
      v  1  1 -1
      v -1 -1 -1
      v  1 -1 -1"""
    spec = mujoco.MjSpec()
    spec.modelname = 'test'
    mesh = spec.add_mesh()
    mesh.name = 'cube'
    mesh.file = 'cube.obj'
    geom = spec.worldbody.add_geom()
    geom.type = mujoco.mjtGeom.mjGEOM_MESH
    geom.meshname = 'cube'
    spec.assets = {'cube.obj': cube}
    model = spec.compile()
    self.assertEqual(model.nmeshvert, 8)
    self.assertEqual(spec.assets['cube.obj'], cube)
    self.assertIs(
        spec.assets['cube.obj'], cube,
        'Asset dict should contain a reference, not a copy'
    )

    xml = """
    <mujoco model="test">
      <compiler angle="radian"/>

      <asset>
        <mesh name="cube" file="cube.obj"/>
      </asset>

      <worldbody>
        <geom type="mesh" mesh="cube"/>
      </worldbody>
    </mujoco>
    """
    assets = {'cube.obj': cube}
    spec = mujoco.MjSpec.from_string(xml, assets=assets)
    model = spec.compile()
    self.assertEqual(model.nmeshvert, 8)
    self.assertEqual(spec.assets['cube.obj'], cube)
    self.assertIs(
        spec.assets['cube.obj'], cube,
        'Asset dict should contain a reference, not a copy'
    )
    del assets
    gc.collect()
    self.assertEqual(spec.assets['cube.obj'], cube)

  def test_include(self):
    included_xml = """
      <mujoco>
        <worldbody>
          <body>
            <geom type="box" size="1 1 1"/>
          </body>
        </worldbody>
      </mujoco>
    """
    spec = mujoco.MjSpec.from_string(
        textwrap.dedent("""
      <mujoco model="MuJoCo Model">
        <include file="included.xml"/>
      </mujoco>
    """),
        include={'included.xml': included_xml.encode('utf-8')},
    )
    self.assertEqual(
        spec.worldbody.first_body().first_geom().type, mujoco.mjtGeom.mjGEOM_BOX
    )

  def test_delete(self):
    file_path = epath.resource_path("mujoco") / "testdata" / "model.xml"
    spec = mujoco.MjSpec.from_file(file_path.as_posix())

    model = spec.compile()
    self.assertIsNotNone(model)
    self.assertEqual(model.nsite, 11)
    self.assertEqual(model.nsensor, 11)

    head = spec.body('head')
    self.assertIsNotNone(head)
    site = head.first_site()
    self.assertIsNotNone(site)
    self.assertEqual(site, spec.site('head'))

    spec.delete(site)
    spec.delete(spec.sensors[-1])
    spec.delete(spec.sensors[-1])

    model = spec.compile()
    self.assertIsNotNone(model)
    self.assertEqual(model.nsite, 10)
    self.assertEqual(model.nsensor, 9)

  def test_plugin(self):
    spec = mujoco.MjSpec()
    spec.activate_plugin('mujoco.elasticity.cable')
    plugin = spec.add_plugin(
        name='instance_name',
        plugin_name='mujoco.elasticity.cable',
        active=True,
        info='info'
    )
    plugin.config = {'twist': '10', 'bend': '1'}
    self.assertEqual(plugin.config, {'twist': '10', 'bend': '1'})

    body = spec.worldbody.add_body()
    body.plugin = plugin
    body.plugin.name = 'instance_name'
    body.plugin.active = True

    geom = body.add_geom()
    geom.type = mujoco.mjtGeom.mjGEOM_BOX
    geom.size[0] = 1
    geom.size[1] = 1
    geom.size[2] = 1

    model = spec.compile()
    self.assertIsNotNone(model)
    self.assertEqual(model.nplugin, 1)
    self.assertEqual(model.npluginattr, 7)
    self.assertEqual(model.body_plugin[1], 0)
    attributes = (''.join([chr(i) for i in model.plugin_attr]).split(chr(0)))
    self.assertEqual(attributes[:2], ['10', '1'])

    copy = spec.copy()  # before assigning the new config
    wrong_config = {'wrong': '10', 'bend': '1'}
    for s in [spec, copy]:
      s.plugins[0].config = wrong_config
      with self.assertRaisesRegex(
          ValueError, "Error: unrecognized attribute 'plugin:wrong'"
      ):
        s.compile()

  def test_geom_and_mesh_plugin(self):
    """Test that geom.plugin and mesh.plugin are accessible."""
    spec = mujoco.MjSpec()

    # Verify mesh has plugin attribute
    mesh = spec.add_mesh(name='test_mesh')
    self.assertTrue(hasattr(mesh, 'plugin'))

    # Verify geom has plugin attribute
    body = spec.worldbody.add_body()
    geom = body.add_geom()
    self.assertTrue(hasattr(geom, 'plugin'))

    # Verify we can access and modify plugin properties
    spec.activate_plugin('mujoco.sdf.torus')
    plugin = spec.add_plugin(name='inst', plugin_name='mujoco.sdf.torus')

    # Assign plugin to geom
    geom.plugin = plugin
    self.assertEqual(geom.plugin.name, 'inst')
    self.assertEqual(geom.plugin.plugin_name, 'mujoco.sdf.torus')

    # Assign plugin to mesh
    mesh.plugin = plugin
    self.assertEqual(mesh.plugin.name, 'inst')
    self.assertEqual(mesh.plugin.plugin_name, 'mujoco.sdf.torus')

  def test_duplicate_name_error(self):
    main_xml = """
    <mujoco>
      <worldbody>
        <body>
          <geom size="0.1"/>
        </body>
      </worldbody>
    </mujoco>
    """

    spec = mujoco.MjSpec.from_string(main_xml)
    spec.add_material().name = 'yellow'
    with self.assertRaisesRegex(
        ValueError, "Error: repeated name 'yellow' in material"
    ):
      spec.add_material().name = 'yellow'

  def test_duplicate_name_error_when_adding_specs_with_kwargs(self):
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body(name='body')
    body.add_geom(
        type=mujoco.mjtGeom.mjGEOM_BOX, size=[0.1, 1, 1], name='dup'
    )
    with self.assertRaisesRegex(
        ValueError, "Error: repeated name 'dup' in geom"
    ):
      body.add_geom(
          type=mujoco.mjtGeom.mjGEOM_BOX, size=[1, 0.1, 1], name='dup'
      )

    spec2 = mujoco.MjSpec()
    spec2.add_material(name='yellow')
    with self.assertRaisesRegex(
        ValueError, "Error: repeated name 'yellow' in material"
    ):
      spec2.add_material(name='yellow')

  def test_delete_unused_plugin(self):
    spec = mujoco.MjSpec.from_string("""
      <mujoco model="MuJoCo Model">
        <extension>
          <plugin plugin="mujoco.pid">
            <instance name="pid1">
              <config key="kp" value="4.0"/>
            </instance>
          </plugin>
        </extension>

        <worldbody>
          <body>
            <geom size="1"/>
          </body>
        </worldbody>
      </mujoco>
    """)
    plugin = spec.plugins[0]
    self.assertIsNotNone(plugin)
    spec.delete(plugin)

    model = spec.compile()
    self.assertIsNotNone(model)
    self.assertEqual(model.nplugin, 0)

  def testPluginAssignment(self):
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body()
    body.name = 'test_body'

    plugin = spec.add_plugin(
        name='test_instance', plugin_name='mujoco.elasticity.cable', active=True
    )
    plugin.config = {'twist': '1e2', 'bend': '4e1'}

    # Assignment should copy active flag and names
    body.plugin = plugin

    self.assertTrue(body.plugin.active)
    self.assertEqual(body.plugin.name, 'test_instance')
    self.assertEqual(body.plugin.plugin_name, 'mujoco.elasticity.cable')

  def test_access_option_stat_visual(self):
    spec = mujoco.MjSpec.from_string("""
      <mujoco model="MuJoCo Model">
        <option timestep="0.001"/>
        <statistic meansize="0.05"/>
        <visual>
          <quality shadowsize="4096"/>
          <headlight active="0"/>
          <rgba camera="0 0 0 0"/>
        </visual>
      </mujoco>
    """)
    self.assertEqual(spec.option.timestep, 0.001)
    self.assertEqual(spec.stat.meansize, 0.05)
    self.assertEqual(spec.visual.quality.shadowsize, 4096)
    self.assertEqual(spec.visual.headlight.active, 0)
    self.assertEqual(spec.visual.global_, getattr(spec.visual, 'global'))
    np.testing.assert_array_equal(spec.visual.rgba.camera, [0, 0, 0, 0])

    spec.option.timestep = 0.002
    spec.stat.meansize = 0.06
    spec.visual.quality.shadowsize = 8192
    spec.visual.headlight.active = 1
    spec.visual.rgba.camera = [1, 1, 1, 1]

    model = spec.compile()

    self.assertEqual(model.opt.timestep, 0.002)
    self.assertEqual(model.stat.meansize, 0.06)
    self.assertEqual(model.vis.quality.shadowsize, 8192)
    self.assertEqual(model.vis.headlight.active, 1)
    np.testing.assert_array_equal(model.vis.rgba.camera, [1, 1, 1, 1])

  def test_assign_list_element(self):
    spec = mujoco.MjSpec()
    material = spec.add_material()
    texture_index = mujoco.mjtTextureRole.mjTEXROLE_RGB

    # Assign a string to a list element.
    material.textures[texture_index] = 'texture_name'
    self.assertEqual(material.textures[texture_index], 'texture_name')

    # Assign a complete list (must be mjNTEXROLE = 10 elements)
    material.textures = ['', 'new_name', '', '', '', '', '', '', '', '']
    self.assertEqual(material.textures[texture_index], 'new_name')

    # textures is iterable
    self.assertEqual('new_name', ''.join(material.textures))

    # supports `len` - should always be mjNTEXROLE (10)
    self.assertLen(material.textures, mujoco.mjtTextureRole.mjNTEXROLE)

    # field checks for out-of-bound access on read and on write
    with self.assertRaises(IndexError):
      material.textures[10] = 'x'

    with self.assertRaises(IndexError):
      material.textures[-1] = 'x'

  def test_textures(self):
    """Tests that partial texture list assignment raises ValueError."""

    spec = mujoco.MjSpec()
    material = spec.add_material(name='mat')
    spec.add_texture(
        name='tex', builtin=mujoco.mjtBuiltin.mjBUILTIN_FLAT, width=2, height=2
    )

    # Should raise ValueError for incorrect size (only 1 element instead of 10)
    with self.assertRaises(ValueError) as cm:
      material.textures = ['tex']
    self.assertIn('must have exactly 10 elements', str(cm.exception))
    self.assertIn('got 1', str(cm.exception))

    # Should succeed with correct size (mjNTEXROLE = 10)
    material.textures = ['tex', '', '', '', '', '', '', '', '', '']
    spec.worldbody.add_geom(size=[0.1, 0.1, 0.1], material='mat')
    model = spec.compile()
    self.assertIsNotNone(model)

  def test_assign_texture(self):
    spec = mujoco.MjSpec()
    texture = spec.add_texture(name='texture', height=2, width=2)
    texture.data = np.zeros((2, 2, 3), dtype=np.uint8).tobytes()
    spec.compile()

  def test_read_texture(self):
    spec = mujoco.MjSpec()
    texture = spec.add_texture(name='texture', height=1, width=2, nchannel=3)
    texture.data = bytes([1, 2, 3, 4, 5, 6])
    read_bytes = texture.data
    self.assertEqual(read_bytes, bytes([1, 2, 3, 4, 5, 6]))

  def test_modify_texture(self):
    # Assign red, green and blue pixels, then make the first pixel yellow.
    spec = mujoco.MjSpec()
    texture = spec.add_texture(name='texture', height=1, width=3, nchannel=3)
    texture.data = bytes([255, 0, 0, 0, 255, 0, 0, 0, 255])
    data_array = bytearray(texture.data)
    data_array[1] = 255
    texture.data = bytes(data_array)
    self.assertEqual(
        texture.data, bytes([255, 255, 0, 0, 255, 0, 0, 0, 255])
    )

    # Assigning values outside the range [0, 255] should raise an error.
    with self.assertRaises(ValueError):
      data_array[0] = 256
    with self.assertRaises(ValueError):
      data_array[0] = -1

  def test_find_unnamed_asset(self):
    spec = mujoco.MjSpec()
    texture_file = spec.add_texture(file='file.png')
    texture_name = spec.add_texture(name='name')
    mesh_file = spec.add_mesh(file='file.obj')
    mesh_name = spec.add_mesh(name='mesh')
    self.assertEqual(spec.texture('file'), texture_file)
    self.assertEqual(spec.texture('name'), texture_name)
    self.assertEqual(spec.mesh('file'), mesh_file)
    self.assertEqual(spec.mesh('mesh'), mesh_name)
    self.assertIsNone(spec.texture('none'))
    self.assertIsNone(spec.mesh('none'))

  def test_texture_gridlayout(self):
    spec = mujoco.MjSpec()

    texture = spec.add_texture(name='test', gridlayout='.U..LFRB.D..')
    self.assertEqual(list(texture.gridlayout), list('.U..LFRB.D..'))

    texture2 = spec.add_texture(name='test2', gridlayout=list('.U..LFRB.D..'))
    self.assertEqual(list(texture2.gridlayout), list('.U..LFRB.D..'))

    with self.assertRaises(ValueError) as cm:
      spec.add_texture(name='test3', gridlayout='.U..')
    self.assertIn('should have length 12', str(cm.exception))

    with self.assertRaises(ValueError) as cm:
      spec.add_texture(name='test4', gridlayout=['.', 'U', '.', '.'])
    self.assertIn('should have length 12', str(cm.exception))

    with self.assertRaises(ValueError) as cm:
      spec.add_texture(name='test5', gridlayout=['..', 'U'] + ['.'] * 10)
    self.assertIn('list elements must be single characters', str(cm.exception))

  def test_attach_units(self):
    child = mujoco.MjSpec()
    parent = mujoco.MjSpec()
    parent.compiler.degree = not child.compiler.degree
    body = child.worldbody.add_body(euler=[90, 0, 0])
    frame = parent.worldbody.add_frame(euler=[-mujoco.mjPI / 2, 0, 0])
    frame.attach_body(body, prefix='child-')
    model = parent.compile()
    np.testing.assert_almost_equal(model.body_quat[1], [1, 0, 0, 0])

  def test_compiler_from_element(self):
    child = mujoco.MjSpec()
    child.meshdir = '/child/meshes'
    child.texturedir = '/child/textures'
    child_body = child.worldbody.add_body()
    child_geom = child_body.add_geom()
    child_geom.size[0] = 1
    child_site = child_body.add_site()

    parent = mujoco.MjSpec()
    parent.meshdir = '/parent/meshes'
    parent.texturedir = '/parent/textures'
    parent_geom = parent.worldbody.add_geom()
    parent_geom.size[0] = 1
    parent_site = parent.worldbody.add_site()

    self.assertEqual(parent_geom.compiler.meshdir, '/parent/meshes')
    self.assertEqual(parent_geom.compiler.texturedir, '/parent/textures')
    self.assertEqual(child_geom.compiler.meshdir, '/child/meshes')
    self.assertEqual(child_site.compiler.meshdir, '/child/meshes')

    frame = parent.worldbody.add_frame()
    frame.attach_body(child_body, prefix='child-')

    self.assertEqual(parent_geom.compiler.meshdir, '/parent/meshes')
    self.assertEqual(parent_site.compiler.meshdir, '/parent/meshes')
    self.assertEqual(child_geom.compiler.meshdir, '/child/meshes')
    self.assertEqual(child_geom.compiler.texturedir, '/child/textures')
    self.assertEqual(child_site.compiler.meshdir, '/child/meshes')

  def test_attach_to_site(self):
    parent = mujoco.MjSpec()
    parent.assets = {'path/cube.obj': 'cube_content'}
    site = parent.worldbody.add_site(pos=[1, 2, 3], quat=[0, 0, 0, 1])
    site.name = 'site'

    # Attach body to site and compile.
    child1 = mujoco.MjSpec()
    child1.assets = {'cube1.obj': 'cube1_content'}
    body1 = child1.worldbody.add_body()
    self.assertIs(body1, site.attach_body(body1, prefix='_'))
    self.assertIsNotNone(child1.worldbody)
    body1.pos = [1, 1, 1]
    model1 = parent.compile()
    self.assertIsNotNone(model1)
    self.assertEqual(model1.nbody, 2)
    np.testing.assert_array_equal(model1.body_pos[1], [0, 1, 4])
    np.testing.assert_array_equal(model1.body_quat[1], [0, 0, 0, 1])
    self.assertEqual(parent.assets['path/cube.obj'], 'cube_content')

    # Attach entire spec to site and compile again.
    child2 = mujoco.MjSpec()
    child2.assets = {'path/cube2.obj': 'cube2_content'}
    body2 = child2.worldbody.add_body(name='body')
    self.assertIsNotNone(parent.attach(child2, site=site, suffix='-child2'))
    self.assertIsNotNone(child2.worldbody)
    self.assertEqual(child2.parent, parent)
    body2.pos = [-1, -1, -1]
    model2 = parent.compile()
    self.assertIsNotNone(model2)
    self.assertEqual(model2.nbody, 3)
    np.testing.assert_array_equal(model2.body_pos[1], [0, 1, 4])
    np.testing.assert_array_equal(model2.body_pos[2], [2, 3, 2])
    np.testing.assert_array_equal(model2.body_quat[1], [0, 0, 0, 1])
    np.testing.assert_array_equal(model2.body_quat[2], [0, 0, 0, 1])
    self.assertEqual(parent.assets['path/cube.obj'], 'cube_content')
    self.assertEqual(parent.assets['path//cube2-child2.obj'], 'cube2_content')

    # Attach another spec to site (referenced by name) and compile again.
    child3 = mujoco.MjSpec()
    child3.assets = {'path/cube3.obj': 'cube3_content'}
    body3 = child3.worldbody.add_body(name='body')
    self.assertIsNotNone(parent.attach(child3, site='site', prefix='child3-'))
    self.assertIsNotNone(child3.worldbody)
    self.assertEqual(child3.parent, parent)
    body3.pos = [-2, -2, -2]
    model3 = parent.compile()
    self.assertIsNotNone(model3)
    self.assertEqual(model3.nbody, 4)
    np.testing.assert_array_equal(model3.body_pos[1], [0, 1, 4])
    np.testing.assert_array_equal(model3.body_pos[2], [2, 3, 2])
    np.testing.assert_array_equal(model3.body_pos[3], [3, 4, 1])
    np.testing.assert_array_equal(model3.body_quat[1], [0, 0, 0, 1])
    np.testing.assert_array_equal(model3.body_quat[2], [0, 0, 0, 1])
    np.testing.assert_array_equal(model3.body_quat[3], [0, 0, 0, 1])
    self.assertEqual(parent.assets['path/cube.obj'], 'cube_content')
    self.assertEqual(parent.assets['path//cube2-child2.obj'], 'cube2_content')
    self.assertEqual(parent.assets['path/child3-cube3.obj'], 'cube3_content')

    # Fail to attach to a site that does not exist.
    child4 = mujoco.MjSpec()
    with self.assertRaisesRegex(ValueError, 'Site not found.'):
      parent.attach(child4, site='invalid_site', prefix='child3-')

  def test_body_to_frame(self):
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body(pos=[1, 2, 3])
    spec.compile()
    frame = body.to_frame()
    np.testing.assert_array_equal(frame.pos, [1, 2, 3])

  def test_get_frame(self):
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body()
    frame = body.add_frame()
    geom = body.add_geom()
    geom.set_frame(frame)
    self.assertIsNotNone(frame)
    self.assertIs(geom.frame, frame)

  def test_attach_to_frame(self):
    parent = mujoco.MjSpec()
    parent.assets = {'path/cube.obj': 'cube_content'}
    frame = parent.worldbody.add_frame(pos=[1, 2, 3], quat=[0, 0, 0, 1])
    frame.name = 'frame'

    # Attach body to frame and compile.
    child1 = mujoco.MjSpec()
    child1.assets = {'path/cube1.obj': 'cube1_content'}
    body1 = child1.worldbody.add_body()
    self.assertIs(body1, frame.attach_body(body1, prefix='_'))
    self.assertIsNotNone(child1.worldbody)
    body1.pos = [1, 1, 1]
    model1 = parent.compile()
    self.assertIsNotNone(model1)
    self.assertEqual(model1.nbody, 2)
    np.testing.assert_array_equal(model1.body_pos[1], [0, 1, 4])
    np.testing.assert_array_equal(model1.body_quat[1], [0, 0, 0, 1])
    self.assertEqual(parent.assets['path/cube.obj'], 'cube_content')

    # Attach entire spec to frame and compile again.
    child2 = mujoco.MjSpec()
    child2.assets = {'path/cube2.obj': 'cube2_content'}
    body2 = child2.worldbody.add_body(name='body')
    body2.set_frame(child2.worldbody.add_frame(pos=[-1, -1, 1]))
    self.assertIsNotNone(parent.attach(child2, frame=frame, suffix='-child'))
    self.assertIsNotNone(child2.worldbody)
    self.assertEqual(child2.parent, parent)
    body2.pos = [-1, -1, -1]
    model2 = parent.compile()
    self.assertIsNotNone(model2)
    self.assertEqual(model2.nbody, 3)
    np.testing.assert_array_equal(model2.body_pos[1], [0, 1, 4])
    np.testing.assert_array_equal(model2.body_pos[2], [3, 4, 3])
    np.testing.assert_array_equal(model2.body_quat[1], [0, 0, 0, 1])
    np.testing.assert_array_equal(model2.body_quat[2], [0, 0, 0, 1])
    self.assertEqual(parent.assets['path/cube.obj'], 'cube_content')
    self.assertEqual(parent.assets['path//cube2-child.obj'], 'cube2_content')

    # Attach another spec to frame (referenced by name) and compile again.
    child3 = mujoco.MjSpec()
    child3.assets = {'path/cube2.obj': 'new_content'}
    body3 = child3.worldbody.add_body(name='body')
    body3.set_frame(child3.worldbody.add_frame(pos=[-1, -1, 1]))
    self.assertIsNotNone(parent.attach(child3, frame='frame', prefix='child3-'))
    self.assertIsNotNone(child3.worldbody)
    self.assertEqual(child3.parent, parent)
    body3.pos = [-2, -2, -2]
    model3 = parent.compile()
    self.assertIsNotNone(model3)
    self.assertEqual(model3.nbody, 4)
    np.testing.assert_array_equal(model3.body_pos[1], [0, 1, 4])
    np.testing.assert_array_equal(model3.body_pos[2], [3, 4, 3])
    np.testing.assert_array_equal(model3.body_pos[3], [4, 5, 2])
    np.testing.assert_array_equal(model3.body_quat[1], [0, 0, 0, 1])
    np.testing.assert_array_equal(model3.body_quat[2], [0, 0, 0, 1])
    np.testing.assert_array_equal(model3.body_quat[3], [0, 0, 0, 1])
    self.assertEqual(parent.assets['path/cube.obj'], 'cube_content')
    self.assertEqual(parent.assets['path/child3-cube2.obj'], 'new_content')

    # Fail to attach to a frame that does not exist.
    child4 = mujoco.MjSpec()
    with self.assertRaisesRegex(ValueError, 'Frame not found.'):
      parent.attach(child4, frame='invalid_frame', prefix='child3-')

  def test_delete_from_attached_spec_error(self):
    parent = mujoco.MjSpec()
    child = mujoco.MjSpec()
    body = child.worldbody.add_body(name='child_body')
    geom = body.add_geom(name='child_geom')

    frame = parent.worldbody.add_frame()
    parent.attach(child, frame=frame, prefix='child_')

    # Now child spec is attached. Deleting from it should raise ValueError.
    with self.assertRaisesRegex(
        ValueError, 'Cannot delete element from an attached mjSpec.'
    ):
      child.delete(geom)

  def test_attach_valid_child_lists(self):
    xml1 = """
    <mujoco>
      <worldbody>
        <body name="b1">
          <geom name="g1"/>
          <joint name="j1" type="hinge"/>
        </body>
      </worldbody>
    </mujoco>
    """

    xml2 = """
    <mujoco>
      <worldbody>
        <body name="b2">
          <geom name="g2"/>
          <joint name="j2" type="hinge"/>
        </body>
      </worldbody>
    </mujoco>
    """

    parent = mujoco.MjSpec.from_string(xml1)
    child = mujoco.MjSpec.from_string(xml2)
    self.assertLen(child.joints, 1)
    self.assertLen(child.geoms, 1)
    frame = parent.worldbody.add_frame()
    parent.attach(child, prefix='', frame=frame)
    self.assertLen(child.joints, 1)
    self.assertLen(child.geoms, 1)

  def test_bind(self):
    spec = mujoco.MjSpec.from_string("""
    <mujoco>
      <worldbody>
        <body name="main">
          <geom name="main" size="0.15 0.15 0.15" mass="1" type="box"/>
          <freejoint/>
          <body name="box">
            <joint name="box" type="hinge" range="-1 +1"/>
            <geom name="box" size="0.15 0.15 0.15" mass="1" type="box"/>
          </body>
          <body name="sphere">
            <joint name="sphere" type="hinge" range="-1 +1"/>
            <geom name="sphere" size="0.15 0.15 0.15" mass="1" type="box"/>
          </body>
        </body>
      </worldbody>
    </mujoco>
    """)
    joint_box = spec.joint('box')
    joint_sphere = spec.joint('sphere')
    joints = [joint_box, joint_sphere]
    mj_model = spec.compile()
    mj_data = mujoco.MjData(mj_model)
    np.testing.assert_array_equal(mj_data.bind(joint_box).qpos, 0)
    np.testing.assert_array_equal(mj_model.bind(joint_box).qposadr, 7)
    np.testing.assert_array_equal(mj_data.bind(joints).qpos, [0, 0])
    np.testing.assert_array_equal(mj_model.bind(joints).qposadr, [7, 8])
    np.testing.assert_array_equal(mj_data.bind([]).qpos, [])
    np.testing.assert_array_equal(mj_model.bind([]).qposadr, [])
    mj_data.bind(joints).qpos = np.array([1, 2])
    np.testing.assert_array_equal(mj_data.bind(joints).qpos, [1, 2])
    with self.assertRaisesRegex(
        AttributeError, "object has no attribute 'invalid'"
    ):
      print(mj_model.bind(joints).invalid)
    invalid_spec = mujoco.MjSpec()
    invalid_spec.worldbody.add_body(name='main')
    with self.assertRaisesRegex(
        ValueError,
        'The mjSpec does not match mjModel. Please recompile the mjSpec.',
    ):
      print(mj_model.bind(invalid_spec.body('main')))

  def test_incorrect_hfield_size(self):
    nrow = 300
    ncol = 400
    hdata = np.random.uniform(size=(1, 1))
    model_spec = mujoco.MjSpec()
    model_spec.add_hfield(
        name='hfield',
        size=[1, 1, 1, 1e-3],
        ncol=ncol,
        nrow=nrow,
        userdata=hdata.flatten(),
    )
    model_spec.worldbody.add_geom(
        name='hfield',
        type=mujoco.mjtGeom.mjGEOM_HFIELD,
        pos=np.array([0, 0, 1]),
        hfieldname='hfield',
    )
    with self.assertRaisesRegex(
        ValueError, r"Error: elevation data length must match nrow\*ncol\n"
        "Element name 'hfield', id 0",
    ):
      model_spec.compile()

  def test_address(self):
    spec1 = mujoco.MjSpec()
    spec2 = mujoco.MjSpec()
    spec3 = spec1.copy()

    self.assertGreater(spec1._address, 0)
    self.assertGreater(spec2._address, 0)
    self.assertGreater(spec3._address, 0)
    self.assertLen({spec1._address, spec2._address, spec3._address}, 3)

  def test_actuator_shortname(self):
    spec = mujoco.MjSpec()
    actuator = spec.add_actuator(
        gainprm=np.zeros((10,)),
        dyntype=mujoco.mjtDyn.mjDYN_FILTER,
        gaintype=mujoco.mjtGain.mjGAIN_AFFINE,
        biastype=mujoco.mjtBias.mjBIAS_AFFINE,
    )
    actuator.set_to_motor()
    self.assertEqual(actuator.gainprm[0], 1)
    self.assertEqual(actuator.dyntype, mujoco.mjtDyn.mjDYN_NONE)
    self.assertEqual(actuator.gaintype, mujoco.mjtGain.mjGAIN_FIXED)
    self.assertEqual(actuator.biastype, mujoco.mjtBias.mjBIAS_NONE)

    actuator.set_to_position(kp=2.0, kv=3.0, timeconst=4.0, inheritrange=True)
    self.assertEqual(actuator.gainprm[0], 2)
    self.assertEqual(actuator.biasprm[1], -2)
    self.assertEqual(actuator.biasprm[2], -3)
    self.assertEqual(actuator.dynprm[0], 4)
    self.assertEqual(actuator.dyntype, mujoco.mjtDyn.mjDYN_FILTEREXACT)
    self.assertEqual(actuator.gaintype, mujoco.mjtGain.mjGAIN_FIXED)
    self.assertEqual(actuator.biastype, mujoco.mjtBias.mjBIAS_AFFINE)
    self.assertEqual(actuator.inheritrange, True)

    actuator.set_to_intvelocity(
        kp=2.0, kv=3.0, timeconst=4.0, inheritrange=True
    )
    self.assertEqual(actuator.gainprm[0], 2)
    self.assertEqual(actuator.biasprm[1], -2)
    self.assertEqual(actuator.biasprm[2], -3)
    self.assertEqual(actuator.dynprm[0], 4)
    self.assertEqual(actuator.dyntype, mujoco.mjtDyn.mjDYN_INTEGRATOR)
    self.assertEqual(actuator.gaintype, mujoco.mjtGain.mjGAIN_FIXED)
    self.assertEqual(actuator.biastype, mujoco.mjtBias.mjBIAS_AFFINE)
    self.assertEqual(actuator.inheritrange, True)

    actuator.set_to_orientation(kp=2.0, dampratio=1.0)
    self.assertEqual(actuator.gainprm[0], 2)
    self.assertEqual(actuator.biasprm[1], -2)
    self.assertEqual(actuator.biasprm[2], 1)
    self.assertEqual(actuator.gaintype, mujoco.mjtGain.mjGAIN_SO3)
    self.assertEqual(actuator.biastype, mujoco.mjtBias.mjBIAS_SO3)
    self.assertEqual(actuator.dyntype, mujoco.mjtDyn.mjDYN_NONE)

    actuator.set_to_pid(kp=2.0, kv=3.0, ki=0.5, imax=1.5, slewmax=4.0)
    self.assertEqual(actuator.biasprm[1], -2)
    self.assertEqual(actuator.biasprm[2], -3)
    self.assertEqual(actuator.gainprm[0], 0.5)
    self.assertEqual(actuator.dynprm[0], 1.5)
    self.assertEqual(actuator.dynprm[1], 4.0)
    self.assertEqual(actuator.gaintype, mujoco.mjtGain.mjGAIN_PID)
    self.assertEqual(actuator.dyntype, mujoco.mjtDyn.mjDYN_PID)

    actuator.set_to_velocity(kv=5.0)
    self.assertEqual(actuator.gainprm[0], 5)
    self.assertEqual(actuator.biasprm[2], -5)
    self.assertEqual(actuator.dyntype, mujoco.mjtDyn.mjDYN_NONE)
    self.assertEqual(actuator.gaintype, mujoco.mjtGain.mjGAIN_FIXED)
    self.assertEqual(actuator.biastype, mujoco.mjtBias.mjBIAS_AFFINE)

    actuator.set_to_damper(kv=6.0)
    self.assertEqual(actuator.gainprm[0], 0)
    self.assertEqual(actuator.gainprm[2], -6)
    self.assertEqual(actuator.dyntype, mujoco.mjtDyn.mjDYN_NONE)
    self.assertEqual(actuator.gaintype, mujoco.mjtGain.mjGAIN_AFFINE)
    self.assertEqual(actuator.biastype, mujoco.mjtBias.mjBIAS_NONE)

    actuator.set_to_adhesion(gain=7.0)
    self.assertEqual(actuator.gainprm[0], 7)
    self.assertEqual(actuator.dyntype, mujoco.mjtDyn.mjDYN_NONE)
    self.assertEqual(actuator.gaintype, mujoco.mjtGain.mjGAIN_FIXED)
    self.assertEqual(actuator.biastype, mujoco.mjtBias.mjBIAS_NONE)

    actuator.set_to_dcmotor(motorconst=[0.05, 0.05], resistance=2.0)
    self.assertEqual(actuator.gainprm[0], 2.0)
    self.assertEqual(actuator.gainprm[1], 0.05)
    self.assertEqual(actuator.dyntype, mujoco.mjtDyn.mjDYN_DCMOTOR)
    self.assertEqual(actuator.gaintype, mujoco.mjtGain.mjGAIN_DCMOTOR)
    self.assertEqual(actuator.biastype, mujoco.mjtBias.mjBIAS_DCMOTOR)

    actuator = spec.add_actuator()
    actuator.set_to_muscle(tausmooth=0.1)
    self.assertEqual(actuator.dyntype, mujoco.mjtDyn.mjDYN_MUSCLE)
    self.assertEqual(actuator.gaintype, mujoco.mjtGain.mjGAIN_MUSCLE)
    self.assertEqual(actuator.biastype, mujoco.mjtBias.mjBIAS_MUSCLE)
    self.assertEqual(actuator.dynprm[2], 0.1)

    actuator.set_to_muscle(
        timeconst=[0.02, 0.05],
        tausmooth=0.2,
        range=[0.8, 1.2],
        force=5.0,
        scale=250.0,
        lmin=0.6,
        lmax=1.7,
        vmax=1.8,
        fpmax=1.4,
        fvmax=1.5,
    )
    self.assertEqual(actuator.dynprm[0], 0.02)
    self.assertEqual(actuator.dynprm[1], 0.05)
    self.assertEqual(actuator.dynprm[2], 0.2)
    self.assertEqual(actuator.gainprm[0], 0.8)
    self.assertEqual(actuator.gainprm[1], 1.2)
    self.assertEqual(actuator.gainprm[2], 5.0)
    self.assertEqual(actuator.gainprm[3], 250.0)
    self.assertEqual(actuator.gainprm[4], 0.6)
    self.assertEqual(actuator.gainprm[5], 1.7)
    self.assertEqual(actuator.gainprm[6], 1.8)
    self.assertEqual(actuator.gainprm[7], 1.4)
    self.assertEqual(actuator.gainprm[8], 1.5)

  def test_bad_contact_sensor(self):
    test_cases = [
        dict(
            expected_error='num (intprm[2]) must be positive in sensor',
            sensor_params=dict(
                type=mujoco.mjtSensor.mjSENS_CONTACT,
                objtype=mujoco.mjtObj.mjOBJ_GEOM,
                objname='sphere1',
                intprm=[1, 0, 0],
            ),
        ),
        dict(
            expected_error='data spec (intprm[0]) must be positive, got 0',
            sensor_params=dict(
                type=mujoco.mjtSensor.mjSENS_CONTACT,
                objtype=mujoco.mjtObj.mjOBJ_GEOM,
                objname='sphere1',
                intprm=[0, 0, 1],
            ),
        ),
        dict(
            expected_error=(
                'data spec intprm[0]=1024 must have at least one bit set of the'
                ' first mjNCONDATA bits'
            ),
            sensor_params=dict(
                type=mujoco.mjtSensor.mjSENS_CONTACT,
                objtype=mujoco.mjtObj.mjOBJ_GEOM,
                objname='sphere1',
                intprm=[1 << 10, 0, 1],
            ),
        ),
        dict(
            expected_error=(
                'data spec intprm[0]=1025 has bits set beyond the first'
                ' mjNCONDATA bits'
            ),
            sensor_params=dict(
                type=mujoco.mjtSensor.mjSENS_CONTACT,
                objtype=mujoco.mjtObj.mjOBJ_GEOM,
                objname='sphere1',
                intprm=[(1 << 10) | 1, 0, 1],
            ),
        ),
        dict(
            expected_error='unknown reduction criterion. got 4',
            sensor_params=dict(
                type=mujoco.mjtSensor.mjSENS_CONTACT,
                objtype=mujoco.mjtObj.mjOBJ_GEOM,
                objname='sphere1',
                intprm=[1, 4, 1],
            ),
        ),
        dict(
            expected_error=(
                'first matching criterion: if set, must be'
                ' (x)body, geom or site'
            ),
            sensor_params=dict(
                type=mujoco.mjtSensor.mjSENS_CONTACT,
                objtype=mujoco.mjtObj.mjOBJ_CAMERA,
                objname='cam',
            ),
        ),
        dict(
            expected_error=(
                'second matching criterion: if set, must be (x)body or geom'
            ),
            sensor_params=dict(
                type=mujoco.mjtSensor.mjSENS_CONTACT,
                reftype=mujoco.mjtObj.mjOBJ_CAMERA,
                refname='cam',
            ),
        ),
    ]

    for params in test_cases:
      expected_error = params.get('expected_error')
      with self.subTest(expected_error):
        spec = mujoco.MjSpec()
        spec.worldbody.add_geom(name='sphere1', size=[.2, 0, 0], pos=[0, 0, 1])
        body = spec.worldbody.add_body(name='body')
        non_root = body.add_body(name='non_root')
        non_root.add_geom(name='sphere3', size=[.3, 0, 0], pos=[1, 0, 1])
        spec.worldbody.add_camera(name='cam')
        spec.add_sensor(**params['sensor_params'])
        error_predicate = lambda e, expected=expected_error: expected in str(e)
        with self.assertRaisesWithPredicateMatch(ValueError, error_predicate):
          spec.compile()

  def test_sensor_data_size(self):
    spec = mujoco.MjSpec()
    quat = spec.add_sensor(
        name='framequat',
        type=mujoco.mjtSensor.mjSENS_FRAMEQUAT,
        objtype=mujoco.mjtObj.mjOBJ_BODY,
        objname='world',
    )
    self.assertEqual(quat.get_data_size(), 4)
    clock = spec.add_sensor(
        name='clock',
        type=mujoco.mjtSensor.mjSENS_CLOCK,
    )
    self.assertEqual(clock.get_data_size(), 1)
    mj_model = spec.compile()
    self.assertEqual(mj_model.sensor_dim[0], 4)
    self.assertEqual(mj_model.sensor_dim[1], 1)

  def test_mesh_material(self):
    spec = mujoco.MjSpec()

    spec.add_material(name='red', rgba=(1, 0, 0, 1))
    spec.add_material(name='green', rgba=(0, 1, 0, 1))

    mesh = spec.add_mesh(name='sphere')
    mesh.make_sphere(subdivision=1)
    mesh.material = 'red'

    geom = spec.worldbody.add_geom()
    geom.type = mujoco.mjtGeom.mjGEOM_MESH
    geom.meshname = 'sphere'

    geom_2 = spec.worldbody.add_geom()
    geom_2.type = mujoco.mjtGeom.mjGEOM_MESH
    geom_2.meshname = 'sphere'
    geom_2.material = 'green'

    model = spec.compile()

    self.assertEqual(model.geom_matid[0], 0)
    self.assertEqual(model.geom_matid[1], 1)

    mesh.material = 'green'
    model = spec.compile()

    self.assertEqual(model.geom_matid[0], 1)

  def test_tendon_path(self):
    spec = mujoco.MjSpec()

    body = spec.worldbody.add_body(name='body')

    body.add_geom(name='body_geom', pos=[0, 0, 0], size=[.1, 0, 0])
    site1 = body.add_site(name='site1', pos=[0, 0, 0])
    site2 = body.add_site(name='site2', pos=[0, 0, -1])
    site3 = body.add_site(name='site3', pos=[0, 0, -4])
    sidesite = body.add_site(name='sidesite', pos=[2, 0, -5])
    site4 = body.add_site(name='site4', pos=[0, 1, -6])

    sphere = spec.worldbody.add_geom(
        name='sphere', size=[0.2, 0, 0], pos=[0, 0, -2]
    )

    cylinder = spec.worldbody.add_geom(
        name='cylinder',
        type=mujoco.mjtGeom.mjGEOM_CYLINDER,
        size=[0.1, 0.2, 0.3],
        pos=[0, 0, -5]
    )

    joint1 = body.add_joint(
        name='joint1', type=mujoco.mjtJoint.mjJNT_HINGE, axis=[0, 1, 0]
    )

    body2 = spec.worldbody.add_body(name='body2', pos=[2, 0, 0])
    body2.add_geom(name='body2_geom', pos=[0, 0, 0], size=[.1, 0, 0])
    joint2 = body2.add_joint(
        name='joint2', type=mujoco.mjtJoint.mjJNT_HINGE, axis=[0, 1, 0]
    )

    spatial_tendon = spec.add_tendon()
    fixed_tendon = spec.add_tendon()

    wrap_site1 = spatial_tendon.wrap_site('site1')
    wrap_site2 = spatial_tendon.wrap_site('site2')
    wrap_pulley1 = spatial_tendon.wrap_pulley(2.0)
    wrap_site3_1 = spatial_tendon.wrap_site('site3')
    wrap_sphere = spatial_tendon.wrap_geom('sphere', '')
    wrap_site4_1 = spatial_tendon.wrap_site('site4')
    wrap_pulley2 = spatial_tendon.wrap_pulley(2.0)
    wrap_site3_2 = spatial_tendon.wrap_site('site3')
    wrap_cylinder = spatial_tendon.wrap_geom('cylinder', 'sidesite')
    wrap_site4_2 = spatial_tendon.wrap_site('site4')

    wrap_joint1 = fixed_tendon.wrap_joint('joint1', 1.0)
    wrap_joint2 = fixed_tendon.wrap_joint('joint2', 2.0)

    self.assertListEqual(
        list(spatial_tendon.path),
        [
            wrap_site1,
            wrap_site2,
            wrap_pulley1,
            wrap_site3_1,
            wrap_sphere,
            wrap_site4_1,
            wrap_pulley2,
            wrap_site3_2,
            wrap_cylinder,
            wrap_site4_2,
        ],
    )
    self.assertListEqual(
        [w.target for w in spatial_tendon.path],
        [
            site1,
            site2,
            None,  # Pulley wraps have no targets
            site3,
            sphere,
            site4,
            None,  # Pulley wraps have no targets
            site3,
            cylinder,
            site4,
        ],
    )
    self.assertEqual(spatial_tendon.path[8].sidesite, sidesite)
    self.assertIsNone(spatial_tendon.path[7].sidesite)

    self.assertListEqual(list(fixed_tendon.path), [wrap_joint1, wrap_joint2])
    self.assertListEqual(
        [w.target for w in fixed_tendon.path],
        [joint1, joint2]
    )

    # Wrap type for geom is only set during compilation.
    spec.compile()

    self.assertEqual(wrap_site1.type, mujoco.mjtWrap.mjWRAP_SITE)
    self.assertEqual(wrap_site2.type, mujoco.mjtWrap.mjWRAP_SITE)
    self.assertEqual(wrap_site3_1.type, mujoco.mjtWrap.mjWRAP_SITE)
    self.assertEqual(wrap_site4_1.type, mujoco.mjtWrap.mjWRAP_SITE)
    self.assertEqual(wrap_site3_2.type, mujoco.mjtWrap.mjWRAP_SITE)
    self.assertEqual(wrap_site4_2.type, mujoco.mjtWrap.mjWRAP_SITE)
    self.assertEqual(wrap_pulley1.type, mujoco.mjtWrap.mjWRAP_PULLEY)
    self.assertEqual(wrap_pulley1.divisor, 2.0)
    self.assertEqual(wrap_sphere.type, mujoco.mjtWrap.mjWRAP_SPHERE)
    self.assertEqual(wrap_cylinder.type, mujoco.mjtWrap.mjWRAP_CYLINDER)
    self.assertEqual(wrap_pulley2.type, mujoco.mjtWrap.mjWRAP_PULLEY)
    self.assertEqual(wrap_pulley2.divisor, 2.0)

    self.assertEqual(wrap_joint1.type, mujoco.mjtWrap.mjWRAP_JOINT)
    self.assertEqual(wrap_joint1.coef, 1.0)
    self.assertEqual(wrap_joint2.type, mujoco.mjtWrap.mjWRAP_JOINT)
    self.assertEqual(wrap_joint2.coef, 2.0)

  def test_from_zip(self):
    """Tests that the assets are correctly parsed from a zip file."""
    model_path_root = (
        epath.resource_path("mujoco") / "testdata" / "MJCF_Root.zip"
    )
    model_path_no_root = (
        epath.resource_path("mujoco") / "testdata" / "MJCF_NoRoot.zip"
    )
    filenames = [model_path_root.as_posix(), model_path_no_root.as_posix()]

    for filename in filenames:
      with self.subTest(filename):
        spec = mujoco.MjSpec.from_zip(filename)
        spec.compile()
        assets = spec.assets
        xml_string = spec.to_xml()
        string_spec = mujoco.MjSpec.from_string(xml_string, assets=assets)
        string_spec.compile()
        self.assertEqual(spec.to_xml(), string_spec.to_xml())

  def test_rangefinder_sensor(self):
    """Test rangefinder sensor with mjSpec, iterative model building."""
    # Raydata field enum values for dataspec bitfield
    rd = mujoco.mjtRayDataField
    dist_val = int(rd.mjRAYDATA_DIST)
    dir_val = int(rd.mjRAYDATA_DIR)
    origin_val = int(rd.mjRAYDATA_ORIGIN)
    point_val = int(rd.mjRAYDATA_POINT)
    normal_val = int(rd.mjRAYDATA_NORMAL)
    depth_val = int(rd.mjRAYDATA_DEPTH)

    # Step 1: Create a rangefinder sensor attached to a site, no dataspec set.
    # Note: site goes on a child body because rangefinder excludes the site's
    # parent body from ray casting.
    spec = mujoco.MjSpec()
    sensor_body = spec.worldbody.add_body(name='sensor_body', pos=[0, 0, 1])
    sensor_body.add_site(name='rf_site', zaxis=[0, 0, -1])
    rf_sensor = spec.add_sensor(
        name='rf',
        type=mujoco.mjtSensor.mjSENS_RANGEFINDER,
        objtype=mujoco.mjtObj.mjOBJ_SITE,
        objname='rf_site',
    )

    # This should fail: data spec (intprm[0]) must be positive
    with self.assertRaisesWithPredicateMatch(
        ValueError,
        lambda e: 'data spec (intprm[0]) must be positive' in str(e)
    ):
      spec.compile()

    # Step 2: Set dataspec to just mjRAYDATA_DIST
    rf_sensor.intprm[0] = 1 << dist_val
    model = spec.compile()
    data = mujoco.MjData(model)
    mujoco.mj_forward(model, data)

    # With no geometry, the ray should miss: dist = -1
    self.assertEqual(model.nsensordata, 1)
    self.assertEqual(data.bind(rf_sensor).data[0], -1)

    # Step 3: Add all raydata fields and check no-hit values
    all_fields = (
        (1 << dist_val) | (1 << dir_val) | (1 << origin_val) |
        (1 << point_val) | (1 << normal_val) | (1 << depth_val)
    )
    rf_sensor.intprm[0] = all_fields
    model = spec.compile()
    data = mujoco.MjData(model)
    mujoco.mj_forward(model, data)

    # Expected size: dist(1) + dir(3) + origin(3) + point(3) + normal(3) +
    # depth(1) = 14
    self.assertEqual(model.nsensordata, 14)

    # No-hit values
    sd = data.bind(rf_sensor).data
    self.assertEqual(sd[0], -1)  # dist
    np.testing.assert_allclose(sd[1:4], [0, 0, 0])  # dir
    np.testing.assert_allclose(sd[4:7], [0, 0, 1])  # origin
    np.testing.assert_allclose(sd[7:10], [0, 0, 0])  # point
    np.testing.assert_allclose(sd[10:13], [0, 0, 0])  # normal
    self.assertEqual(sd[13], -1)  # depth

    # Step 4: Add a floor plane, now the ray should hit
    spec.worldbody.add_geom(
        name='floor',
        type=mujoco.mjtGeom.mjGEOM_PLANE,
        size=[10, 10, 0.1],
    )
    model = spec.compile()
    data = mujoco.MjData(model)
    mujoco.mj_forward(model, data)

    # Ray starts at z=1 pointing down, hits floor at z=0
    # For site sensor, depth = dist
    sd = data.bind(rf_sensor).data
    self.assertAlmostEqual(sd[0], 1.0, places=6)  # dist
    np.testing.assert_allclose(sd[1:4], [0, 0, -1], atol=1e-10)  # dir
    np.testing.assert_allclose(sd[4:7], [0, 0, 1], atol=1e-10)  # origin
    np.testing.assert_allclose(sd[7:10], [0, 0, 0], atol=1e-10)  # point
    np.testing.assert_allclose(sd[10:13], [0, 0, 1], atol=1e-10)  # normal
    self.assertAlmostEqual(sd[13], 1.0, places=6)  # depth

    # Step 5: Add a camera-based rangefinder sensor
    # Camera also on child body so it doesn't exclude the floor
    cam_body = spec.worldbody.add_body(name='cam_body', pos=[0, 0, 2])
    cam_body.add_camera(
        name='rf_cam',
        xyaxes=[1, 0, 0, 0, 1, 0],  # z=[0,0,1], looks along -z (down)
        resolution=[3, 3],
        fovy=90,
    )
    cam_sensor = spec.add_sensor(
        name='rf_cam_sensor',
        type=mujoco.mjtSensor.mjSENS_RANGEFINDER,
        objtype=mujoco.mjtObj.mjOBJ_CAMERA,
        objname='rf_cam',
        intprm=[(1 << dist_val) | (1 << depth_val), 0, 0],
    )

    model = spec.compile()
    data = mujoco.MjData(model)
    mujoco.mj_forward(model, data)

    # Site sensor: 14 values, Camera sensor: (1+1)*9 = 18 values
    self.assertEqual(model.nsensordata, 14 + 18)

    # Check camera sensor data using bind
    cam_sd = data.bind(cam_sensor).data
    stride = 2  # dist + depth per pixel
    center_pixel = 4  # center of 3x3 = row 1, col 1

    # Center pixel: ray straight down from z=2 to z=0
    self.assertAlmostEqual(cam_sd[center_pixel * stride], 2.0, places=6)
    self.assertAlmostEqual(cam_sd[center_pixel * stride + 1], 2.0, places=6)

    # Corner pixel: off-axis ray, dist > depth
    self.assertGreater(cam_sd[0], cam_sd[1])  # dist > depth
    self.assertAlmostEqual(cam_sd[1], 2.0, places=6)  # depth is still 2.0

  def test_encode_xml(self):
    # Create a simple spec and compile.
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body()
    geom = body.add_geom()
    geom.size[0] = 1
    model = spec.compile()

    # Encode to XML.
    filename = os.path.join(self.create_tempdir().full_path, 'output.xml')
    nbytes = spec.encode(filename, model)
    self.assertGreater(nbytes, 0)

    # Verify the output is valid XML that can be loaded.
    reloaded = mujoco.MjSpec.from_file(filename)
    reloaded_model = reloaded.compile()
    self.assertEqual(reloaded_model.ngeom, model.ngeom)

  def test_encode_xml_without_model(self):
    # Create a simple spec and compile so XML can be written.
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body()
    geom = body.add_geom()
    geom.size[0] = 1
    spec.compile()

    # Encode to XML without passing a model explicitly.
    filename = os.path.join(self.create_tempdir().full_path, 'output.xml')
    nbytes = spec.encode(filename)
    self.assertGreater(nbytes, 0)

  def test_encode_no_encoder_raises(self):
    # Create a simple spec and compile.
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body()
    geom = body.add_geom()
    geom.size[0] = 1
    model = spec.compile()

    # Encode with an unknown extension should fail.
    filename = os.path.join(self.create_tempdir().full_path, 'output.unknown')
    with self.assertRaises(mujoco.FatalError):
      spec.encode(filename, model)

  def test_make_flex_grid(self):
    # Create a spec with a flexcomp grid.
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body(name='flex_body')
    flex = body.make_flex(
        name='test_flex',
        type='grid',
        dim=3,
        count=[4, 4, 4],
        spacing=[0.05, 0.05, 0.05],
        mass=0.5,
        equality=1,
    )
    self.assertIsNotNone(flex)
    model = spec.compile()
    self.assertIsNotNone(model)
    self.assertGreater(model.nflex, 0)

    # Verify elastic2d is forwarded to Make() and produces shell-mode
    # strain constraints (equality=3 + elastic2d=2 triggers shell path).
    spec2 = mujoco.MjSpec()
    body2 = spec2.worldbody.add_body(name='shell_body')
    flex2 = body2.make_flex(
        name='shell_flex',
        type='grid',
        dim=3,
        count=[3, 3, 3],
        spacing=[0.1, 0.1, 0.1],
        dof='trilinear',
        cellcount=[2, 2, 1],
        mass=0.5,
        equality=3,  # strain
        elastic2d=1,  # bend
    )
    flex2.young = 1e3
    flex2.thickness = 0.01
    flex2.selfcollide = mujoco.mjtFlexSelf.mjFLEXSELF_NONE
    self.assertIsNotNone(flex2)
    model2 = spec2.compile()
    self.assertIsNotNone(model2)
    # Shell mode creates face-based constraints; verify they exist.
    self.assertGreater(model2.neq, 0)

  def test_make_flex_defaults(self):
    # Create a spec with minimal flexcomp args (defaults).
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body(name='flex_body')
    flex = body.make_flex(name='default_flex', equality=1)
    self.assertIsNotNone(flex)
    model = spec.compile()
    self.assertIsNotNone(model)

  def test_make_flex_with_pos_quat(self):
    # Create a spec with flexcomp that has a pose.
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body(name='flex_body')
    flex = body.make_flex(
        name='posed_flex',
        type='grid',
        dim=2,
        count=[3, 3, 1],
        spacing=[0.1, 0.1, 0.1],
        pos=[1.0, 2.0, 3.0],
        quat=[1.0, 0.0, 0.0, 0.0],
        equality=1,
    )
    self.assertIsNotNone(flex)
    model = spec.compile()
    self.assertIsNotNone(model)

  def test_authored_struct(self):
    spec = mujoco.MjSpec()
    # authored struct should be accessible with correct fields
    self.assertEqual(spec.authored.option, 0)
    self.assertEqual(spec.authored.disableflags, 0)
    self.assertEqual(spec.authored.enableflags, 0)
    self.assertEqual(spec.authored.disableactuator, 0)
    self.assertEqual(spec.authored.visual_global, 0)
    self.assertEqual(spec.authored.visual_quality, 0)
    self.assertEqual(spec.authored.visual_headlight, 0)
    self.assertEqual(spec.authored.visual_map, 0)
    self.assertEqual(spec.authored.visual_scale, 0)
    self.assertEqual(spec.authored.visual_rgba, 0)
    # compiler authored should be zero
    self.assertEqual(spec.compiler.authored, 0)

  def test_authored_flags_from_xml(self):
    spec = mujoco.MjSpec.from_string("""
    <mujoco>
      <option timestep="0.01">
        <flag constraint="disable" energy="enable"/>
      </option>
      <compiler boundmass="1"/>
      <visual>
        <global fovy="60"/>
        <quality shadowsize="1024"/>
      </visual>
      <worldbody/>
    </mujoco>
    """)
    # disable/enable flags should be tracked
    self.assertNotEqual(
        spec.authored.disableflags & mujoco.mjtDisableBit.mjDSBL_CONSTRAINT, 0)
    self.assertEqual(
        spec.authored.disableflags & mujoco.mjtDisableBit.mjDSBL_CONTACT, 0)
    self.assertNotEqual(
        spec.authored.enableflags & mujoco.mjtEnableBit.mjENBL_ENERGY, 0)
    self.assertEqual(
        spec.authored.enableflags & mujoco.mjtEnableBit.mjENBL_OVERRIDE, 0)

    # option authored bitmask should be nonzero (timestep was authored)
    self.assertNotEqual(spec.authored.option, 0)

    # compiler authored bitmask should be nonzero (boundmass was authored)
    self.assertNotEqual(spec.compiler.authored, 0)

    # visual authored bitmask should be nonzero (fovy, shadowsize were authored)
    self.assertNotEqual(spec.authored.visual_global, 0)
    self.assertNotEqual(spec.authored.visual_quality, 0)

    # visual sections that were not authored should be zero
    self.assertEqual(spec.authored.visual_headlight, 0)
    self.assertEqual(spec.authored.visual_map, 0)
    self.assertEqual(spec.authored.visual_scale, 0)
    self.assertEqual(spec.authored.visual_rgba, 0)

  def test_authored_defaults_zero(self):
    spec = mujoco.MjSpec.from_string("""
    <mujoco>
      <worldbody/>
    </mujoco>
    """)
    # nothing authored in an empty model
    self.assertEqual(spec.authored.option, 0)
    self.assertEqual(spec.authored.disableflags, 0)
    self.assertEqual(spec.authored.enableflags, 0)
    self.assertEqual(spec.compiler.authored, 0)
    self.assertEqual(spec.authored.visual_global, 0)
    self.assertEqual(spec.authored.visual_quality, 0)
    self.assertEqual(spec.authored.visual_map, 0)

  def test_attach_conflict_merge_procedural(self):
    # Procedural attach with merge mode: min/max fields are merged.
    parent = mujoco.MjSpec()
    parent.compiler.conflict = mujoco.mjtConflict.mjCONFLICT_MERGE
    parent.option.timestep = 0.005
    parent.option.iterations = 150
    parent.worldbody.add_geom().size[0] = 1

    child = mujoco.MjSpec()
    child.option.timestep = 0.001  # smaller -> wins (min-merge)
    child.option.iterations = 200  # larger -> wins (max-merge)
    child_body = child.worldbody.add_body()
    child_body.add_geom().size[0] = 1

    frame = parent.worldbody.add_frame()
    frame.attach_body(child_body, prefix='child_')

    # merged values are applied immediately at attach time
    self.assertEqual(parent.option.timestep, 0.001)
    self.assertEqual(parent.option.iterations, 200)

    # compile succeeds with the merged values
    model = parent.compile()
    self.assertIsNotNone(model)
    self.assertEqual(model.opt.timestep, 0.001)
    self.assertEqual(model.opt.iterations, 200)

  def test_attach_conflict_error_procedural(self):
    # Procedural attach with unmergeable conflict: raises ValueError,
    # parent spec is unchanged.
    parent = mujoco.MjSpec()
    parent.compiler.conflict = mujoco.mjtConflict.mjCONFLICT_MERGE
    parent.option.timestep = 0.005
    parent.option.integrator = mujoco.mjtIntegrator.mjINT_RK4

    child = mujoco.MjSpec()
    child.option.timestep = 0.001
    child.option.integrator = mujoco.mjtIntegrator.mjINT_IMPLICIT
    child_body = child.worldbody.add_body()
    child_body.add_geom().size[0] = 1

    frame = parent.worldbody.add_frame()

    with self.assertRaisesRegex(ValueError, 'integrator'):
      frame.attach_body(child_body, prefix='child_')

    # parent spec should be unchanged (two-pass guarantee)
    self.assertEqual(parent.option.timestep, 0.005)
    self.assertEqual(parent.option.integrator, mujoco.mjtIntegrator.mjINT_RK4)

  def test_attach_conflict_merge_xml(self):
    # XML-based attach with merge mode: child timestep wins (min).
    parent_xml = textwrap.dedent("""\
      <mujoco>
        <compiler conflict="merge"/>
        <option timestep="0.005" iterations="50"/>
        <asset>
          <model name="child" file="child.xml"/>
        </asset>
        <worldbody>
          <body name="parent_body">
            <geom size="1"/>
            <attach model="child" body="child_body" prefix="child/"/>
          </body>
        </worldbody>
      </mujoco>
    """)

    child_xml = textwrap.dedent("""\
      <mujoco>
        <option timestep="0.001" iterations="150"/>
        <worldbody>
          <body name="child_body">
            <geom size="1"/>
          </body>
        </worldbody>
      </mujoco>
    """)

    spec = mujoco.MjSpec.from_string(
        parent_xml,
        include={'child.xml': child_xml.encode()},
    )
    model = spec.compile()
    self.assertIsNotNone(model)
    self.assertEqual(model.opt.timestep, 0.001)  # min
    self.assertEqual(model.opt.iterations, 150)  # max

  def test_attach_conflict_error_xml(self):
    # XML-based attach with error mode: any conflict raises ValueError.
    parent_xml = textwrap.dedent("""\
      <mujoco>
        <compiler conflict="error"/>
        <option timestep="0.005"/>
        <asset>
          <model name="child" file="child.xml"/>
        </asset>
        <worldbody>
          <body name="parent_body">
            <geom size="1"/>
            <attach model="child" body="child_body" prefix="child/"/>
          </body>
        </worldbody>
      </mujoco>
    """)

    child_xml = textwrap.dedent("""\
      <mujoco>
        <option timestep="0.001"/>
        <worldbody>
          <body name="child_body">
            <geom size="1"/>
          </body>
        </worldbody>
      </mujoco>
    """)

    with self.assertRaisesRegex(ValueError, 'timestep'):
      mujoco.MjSpec.from_string(
          parent_xml,
          include={'child.xml': child_xml.encode()},
      )

  def test_bind_rejects_stale_model_after_first_equality(self):
    spec = mujoco.MjSpec()
    for name in ('a', 'b'):
      body = spec.worldbody.add_body(name=name)
      body.add_geom(size=[1, 0, 0])
      body.add_freejoint()
    model = spec.compile()

    # the first equality must invalidate the compiled model for bind
    equality = spec.add_equality(
        type=mujoco.mjtEq.mjEQ_WELD,
        objtype=mujoco.mjtObj.mjOBJ_BODY,
        name1='a',
        name2='b',
    )
    with self.assertRaisesRegex(ValueError, 'does not match'):
      model.bind(equality)

    model = spec.compile()
    self.assertEqual(model.bind(equality).id, 0)

  def test_delete_reclaims_memory_and_invalidates_bind(self):
    spec = mujoco.MjSpec()
    for i in range(100):
      body = spec.worldbody.add_body(name=f'body_{i}')
      joint = body.add_joint(
          name=f'joint_{i}', type=mujoco.mjtJoint.mjJNT_HINGE
      )
      body.add_geom(size=[0.1, 0.1, 0.1])
      act = spec.add_actuator(
          name=f'act_{i}',
          target=f'joint_{i}',
          trntype=mujoco.mjtTrn.mjTRN_JOINT,
      )
      spec.delete(body)

    model = spec.compile()
    data = mujoco.MjData(model)
    self.assertEqual(model.nbody, 1)
    self.assertEqual(model.nu, 0)

    # A Python reference to a deleted body or implicitly deleted actuator
    # remains memory-safe for attribute access and raises IndexError on bind.
    self.assertEqual(body.name, 'body_99')
    self.assertIsNone(body.parent)
    self.assertEqual(joint.name, 'joint_99')
    self.assertEqual(act.name, 'act_99')
    with self.assertRaisesRegex(IndexError, 'Invalid index -1'):
      data.bind(body)
    with self.assertRaisesRegex(IndexError, 'Invalid index -1'):
      data.bind(joint)
    with self.assertRaisesRegex(IndexError, 'Invalid index -1'):
      data.bind(act)

    # A child obtained via spec.joints (whose reference_internal parent is spec,
    # not the body) stays alive with parent cleared to None once its body is
    # deleted and freed.
    spec.worldbody.add_body(name='temp_body').add_joint(name='orphan_joint')
    orphan = spec.joints[-1]
    spec.delete(spec.bodies[-1])
    self.assertEqual(orphan.name, 'orphan_joint')
    self.assertIsNone(orphan.parent)

  def test_signature_tracks_edits(self):
    spec = mujoco.MjSpec()
    body = spec.worldbody.add_body()
    body.add_geom(size=[1, 0, 0])
    model = spec.compile()
    self.assertEqual(body.signature, model.signature)

    geom = body.add_geom(size=[1, 0, 0])
    self.assertNotEqual(geom.signature, model.signature)
    with self.assertRaisesRegex(ValueError, 'does not match'):
      model.bind(geom)

    model = spec.compile()
    self.assertEqual(geom.signature, model.signature)
    self.assertEqual(model.bind(geom).id, 1)


if __name__ == '__main__':
  absltest.main()