mujoco

// Copyright 2022 DeepMind Technologies Limited
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

#include <cmath>
#include <cstdint>
#include <cstdlib>
#include <optional>
#include <utility>

#include <mujoco/mjplugin.h>
#include <mujoco/mjtype.h>
#include <mujoco/mjvisualize.h>
#include <mujoco/mujoco.h>
#include "sdf.h"
#include "gear.h"

namespace mujoco::plugin::sdf {
namespace {

static mjtNum circle(mjtNum rho, mjtNum r) { return rho - r; }

static mjtNum smoothUnion(mjtNum a, mjtNum b, mjtNum k) {
  mjtNum h = mju_clip(0.5 + 0.5 * (b - a) / k, 0.0, 1.0);
  return b * (1. - h) + a * h - k * h * (1. - h);
}

static mjtNum smoothIntersection(mjtNum a, mjtNum b, mjtNum k) {
  return Subtraction(Intersection(a, b),
                     smoothUnion(Subtraction(a, b), Subtraction(b, a), k));
}

static mjtNum extrusion(const mjtNum p[3], mjtNum sdf_2d, mjtNum h) {
  mjtNum w[2] = {sdf_2d, abs(p[2]) - h};
  mjtNum w_abs[2] = {mju_max(w[0], 0), mju_max(w[1], 0)};
  return mju_min(mju_max(w[0], w[1]), 0.) + mju_norm(w_abs, 2);
}

static mjtNum mod(mjtNum x, mjtNum y) { return x - y * floor(x / y); }

static mjtNum distance2D(const mjtNum p[3],
                         const mjtNum attributes[GearAttribute::nattribute]) {
  // see https://www.shadertoy.com/view/3lG3WR
  mjtNum D = attributes[1];
  mjtNum N = attributes[2];
  mjtNum psi = 3.096e-5 * N * N - 6.557e-3 * N + 0.551;  // pressure angle
  mjtNum alpha = attributes[0];

  mjtNum R = D / 2.0;
  /* The Pitch Circle Diameter is the diameter of a circle which by a pure
   * rolling action would transmit the same motion as the actual gear wheel. It
   * should be noted that in the case of wheels which connect non-parallel
   * shafts, the pitch circle diameter is different for each cross section of
   * the wheel normal to the axis of rotation.
   */

  mjtNum rho = mju_norm(p, 2);
  mjtNum Pd = N / D;  // Diametral Pitch: teeth per unit length of diameter
  mjtNum P =
      mjPI / Pd;  // Circular Pitch: the length of arc round the pitch circle
                  // between corresponding points on adjacent teeth.
  mjtNum a = 1.0 / Pd;  // Addendum: radial length of a tooth from the pitch
                        // circle to the tip of the tooth.

  mjtNum Do = D + 2.0 * a;  // Outside Diameter
  mjtNum Ro = Do / 2.0;

  mjtNum h = 2.2 / Pd;

  mjtNum innerR = Ro - h - 0.14 * D;
  if (attributes[4] >= 0.0) {
    innerR = attributes[4] / 2.0;
  }

  // Early exit
  if (innerR - rho > 0.0) return innerR - rho;

  // Early exit
  if (Ro - rho < -0.2) return rho - Ro;

  mjtNum Db = D * mju_cos(psi);  // Base Diameter
  mjtNum Rb = Db / 2.0;

  mjtNum fi = mju_atan2(p[1], p[0]) + alpha;
  mjtNum alphaStride = P / R;

  mjtNum invAlpha = mju_acos(Rb / R);
  mjtNum invPhi = mju_tan(invAlpha) - invAlpha;

  mjtNum shift = alphaStride / 2.0 - 2.0 * invPhi;

  mjtNum fia = mod(fi + shift / 2.0, alphaStride) - shift / 2.0;
  mjtNum fib = mod(-fi - shift + shift / 2.0, alphaStride) - shift / 2.0;

  mjtNum dista = -1.0e6;
  mjtNum distb = -1.0e6;

  if (Rb < rho) {
    mjtNum acos_rbRho = mju_acos(Rb / rho);

    mjtNum thetaa = fia + acos_rbRho;
    mjtNum thetab = fib + acos_rbRho;

    mjtNum ta = mju_sqrt(rho * rho - Rb * Rb);

    // https://math.stackexchange.com/questions/1266689/distance-from-a-point-to-the-involute-of-a-circle
    dista = ta - Rb * thetaa;
    distb = ta - Rb * thetab;
  }

  mjtNum gearOuter = circle(rho, Ro);
  mjtNum gearLowBase = circle(rho, Ro - h);
  mjtNum crownBase = circle(rho, innerR);
  mjtNum cogs = Intersection(dista, distb);
  mjtNum baseWalls =
      Intersection(fia - (alphaStride - shift), fib - (alphaStride - shift));

  cogs = Intersection(baseWalls, cogs);
  cogs = smoothIntersection(gearOuter, cogs, 0.0035 * D);
  cogs = smoothUnion(gearLowBase, cogs, Rb - Ro + h);
  cogs = Subtraction(cogs, crownBase);

  return cogs;
}

static mjtNum distance(const mjtNum p[3],
                       const mjtNum attributes[GearAttribute::nattribute]) {
  return extrusion(p, distance2D(p, attributes), attributes[3] / 2.);
}

}  // namespace

// factory function
std::optional<Gear> Gear::Create(const mjModel* m, mjData* d, int instance) {
  if (CheckAttr("alpha", m, instance) && CheckAttr("diameter", m, instance) &&
      CheckAttr("teeth", m, instance) &&
      CheckAttr("innerdiameter", m, instance)) {
    return Gear(m, d, instance);
  } else {
    mju_warning("Invalid parameter specification in Gear plugin");
    return std::nullopt;
  }
}

// plugin constructor
Gear::Gear(const mjModel* m, mjData* d, int instance) {
  SdfDefault<GearAttribute> defattribute;

  for (int i = 0; i < GearAttribute::nattribute; i++) {
    attribute[i] = defattribute.GetDefault(
        GearAttribute::names[i],
        mj_getPluginConfig(m, instance, GearAttribute::names[i]));
  }
}

// plugin computation
void Gear::Compute(const mjModel* m, mjData* d, int instance) {
  visualizer_.Next();
}

// plugin reset
void Gear::Reset() { visualizer_.Reset(); }

// plugin visualization
void Gear::Visualize(const mjModel* m, mjData* d, const mjvOption* opt,
                     mjvScene* scn, int instance) {
  visualizer_.Visualize(m, d, opt, scn, instance);
}

// sdf
mjtNum Gear::Distance(const mjtNum point[3]) const {
  return distance(point, attribute);
}

// gradient of sdf
void Gear::Gradient(mjtNum grad[3], const mjtNum point[3]) const {
  mjtNum eps = 1e-8;
  mjtNum dist0 = distance(point, attribute);

  mjtNum pointX[3] = {point[0] + eps, point[1], point[2]};
  mjtNum distX = distance(pointX, attribute);
  mjtNum pointY[3] = {point[0], point[1] + eps, point[2]};
  mjtNum distY = distance(pointY, attribute);
  mjtNum pointZ[3] = {point[0], point[1], point[2] + eps};
  mjtNum distZ = distance(pointZ, attribute);

  grad[0] = (distX - dist0) / eps;
  grad[1] = (distY - dist0) / eps;
  grad[2] = (distZ - dist0) / eps;
}

// plugin registration
void Gear::RegisterPlugin() {
  mjpPlugin plugin;
  mjp_defaultPlugin(&plugin);

  plugin.name = "mujoco.sdf.gear";
  plugin.capabilityflags |= mjPLUGIN_SDF;

  plugin.nattribute = GearAttribute::nattribute;
  plugin.attributes = GearAttribute::names;
  plugin.nstate = +[](const mjModel* m, int instance) { return 0; };

  plugin.init = +[](const mjModel* m, mjData* d, int instance) {
    auto sdf_or_null = Gear::Create(m, d, instance);
    if (!sdf_or_null.has_value()) {
      return -1;
    }
    d->plugin_data[instance] =
        reinterpret_cast<uintptr_t>(new Gear(std::move(*sdf_or_null)));
    return 0;
  };
  plugin.destroy = +[](mjData* d, int instance) {
    delete reinterpret_cast<Gear*>(d->plugin_data[instance]);
    d->plugin_data[instance] = 0;
  };
  plugin.reset = +[](const mjModel* m, mjtNum* plugin_state, void* plugin_data,
                     int instance) {
    auto sdf = reinterpret_cast<Gear*>(plugin_data);
    sdf->Reset();
  };
  plugin.visualize = +[](const mjModel* m, mjData* d, const mjvOption* opt,
                         mjvScene* scn, int instance) {
    auto* sdf = reinterpret_cast<Gear*>(d->plugin_data[instance]);
    sdf->Visualize(m, d, opt, scn, instance);
  };
  plugin.compute =
      +[](const mjModel* m, mjData* d, int instance, int capability_bit) {
        auto* sdf = reinterpret_cast<Gear*>(d->plugin_data[instance]);
        sdf->Compute(m, d, instance);
      };
  plugin.sdf_distance =
      +[](const mjtNum point[3], const mjData* d, int instance) {
        auto* sdf = reinterpret_cast<Gear*>(d->plugin_data[instance]);
        return sdf->Distance(point);
      };
  plugin.sdf_gradient = +[](mjtNum gradient[3], const mjtNum point[3],
                            const mjData* d, int instance) {
    auto* sdf = reinterpret_cast<Gear*>(d->plugin_data[instance]);
    sdf->visualizer_.AddPoint(point);
    sdf->Gradient(gradient, point);
  };
  plugin.sdf_staticdistance =
      +[](const mjtNum point[3], const mjtNum* attributes) {
        return distance(point, attributes);
      };
  plugin.sdf_aabb = +[](mjtNum aabb[6], const mjtNum* attributes) {
    aabb[0] = aabb[1] = aabb[2] = 0;
    aabb[3] = aabb[4] = attributes[1] / 2. * 1.25;
    aabb[5] = attributes[3] / 2. * 1.1;
  };
  plugin.sdf_attribute =
      +[](mjtNum attribute[], const char* name[], const char* value[]) {
        SdfDefault<GearAttribute> defattribute;
        defattribute.GetDefaults(attribute, name, value);
      };

  mjp_registerPlugin(&plugin);
}

}  // namespace mujoco::plugin::sdf