Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
685c9ca5bThis file is pinned to the selected release. Download the original to open it in your design tool.
// Copyright 2019 DeepMind Technologies Limited
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
using System;
using System.Collections;
using System.Collections.Generic;
using NUnit.Framework;
using UnityEngine;
namespace Mujoco {
[TestFixture]
public class MjGizmosDrawArcTests {
[SetUp]
public void SetUp() {
MjGizmos.DrawLine = MockDrawLine;
MjGizmos.NumCircleSegments = 4;
_lineFrom = new List<Vector3>();
_lineTo = new List<Vector3>();
}
[TearDown]
public void TearDown() {
MjGizmos.DrawLine = Gizmos.DrawLine;
MjGizmos.NumCircleSegments = 32;
}
private List<Vector3> _lineFrom;
private List<Vector3> _lineTo;
private void MockDrawLine(Vector3 from, Vector3 to) {
_lineFrom.Add(from);
_lineTo.Add(to);
}
[Test]
public void LineCountOfDrawnCircle() {
MjGizmos.DrawArc(Vector3.zero, 1.0f, Vector3.up, 1.0f, 0.0f);
Assert.That(_lineFrom, Has.Count.EqualTo(MjGizmos.NumCircleSegments));
Assert.That(_lineTo, Has.Count.EqualTo(MjGizmos.NumCircleSegments));
}
[Test]
public void LineAdjacencyOfDrawnCircle() {
MjGizmos.DrawArc(Vector3.zero, 1.0f, Vector3.up, 1.0f, 0.0f);
Assert.That((_lineFrom[0] - _lineTo[3]).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[1] - _lineTo[0]).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[2] - _lineTo[1]).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[3] - _lineTo[2]).magnitude, Is.LessThan(1e-3f));
}
[Test]
public void CircleVertexPositions() {
MjGizmos.DrawArc(Vector3.zero, 1.0f, Vector3.up, 1.0f, 0.0f);
Assert.That((_lineFrom[0] - new Vector3(0, 0, -1)).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[1] - new Vector3(-1, 0, 0)).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[2] - new Vector3(0, 0, 1)).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[3] - new Vector3(1, 0, 0)).magnitude, Is.LessThan(1e-3f));
}
[Test]
public void VerticesOfOffsetCircle() {
MjGizmos.DrawArc(Vector3.one, 1.0f, Vector3.up, 1.0f, 0.0f);
Assert.That((_lineFrom[0] - new Vector3(1, 1, 0)).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[1] - new Vector3(0, 1, 1)).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[2] - new Vector3(1, 1, 2)).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[3] - new Vector3(2, 1, 1)).magnitude, Is.LessThan(1e-3f));
}
[Test]
public void DrawingRotatedCircle() {
MjGizmos.DrawArc(Vector3.zero, 1.0f, Vector3.right, 1.0f, 0.0f);
Assert.That((_lineFrom[0] - new Vector3(0, 0, 1)).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[1] - new Vector3(0, -1, 0)).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[2] - new Vector3(0, 0, -1)).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineFrom[3] - new Vector3(0, 1, 0)).magnitude, Is.LessThan(1e-3f));
}
[Test]
public void DrawingHalfCircle() {
MjGizmos.DrawArc(Vector3.zero, 1.0f, Vector3.up, 0.25f, 0.0f);
Assert.That(_lineFrom, Has.Count.EqualTo(1));
Assert.That(_lineTo, Has.Count.EqualTo(1));
Assert.That((_lineFrom[0] - new Vector3(0, 0, -1)).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineTo[0] - new Vector3(-1, 0, 0)).magnitude, Is.LessThan(1e-3f));
}
[Test]
public void DrawingHalfCircleWithOffsetCircumference() {
MjGizmos.DrawArc(Vector3.zero, 1.0f, Vector3.up, 0.25f, 90);
Assert.That((_lineFrom[0] - new Vector3(-1, 0, 0)).magnitude, Is.LessThan(1e-3f));
Assert.That((_lineTo[0] - new Vector3(0, 0, 1)).magnitude, Is.LessThan(1e-3f));
}
}
[TestFixture]
public class MjGizmosCapsuleTests {
[SetUp]
public void SetUp() {
MjGizmos.DrawLine = MockDrawLine;
MjGizmos.DrawArc = MockDrawArc;
MjGizmos.NumCircleSegments = 4;
_arc = new List<Tuple<Vector3, float, Vector3, float, float>>();
}
[TearDown]
public void TearDown() {
MjGizmos.DrawLine = Gizmos.DrawLine;
MjGizmos.DrawArc = MjGizmos.DrawArcInternal;
MjGizmos.NumCircleSegments = 32;
}
private List<Tuple<Vector3, float, Vector3, float, float>> _arc;
private void MockDrawLine(Vector3 from, Vector3 to) {}
private void MockDrawArc(Vector3 position, float radius, Vector3 axis, float length,
float startAngle) {
_arc.Add(Tuple.Create(position, radius, axis, length, startAngle));
}
[Test]
public void NumberOfArcsUsedToDrawCapsule() {
MjGizmos.DrawWireCapsule(Vector3.zero, 0.5f, 1.0f);
Assert.That(_arc, Has.Count.EqualTo(6));
}
[Test]
public void CapsuleBaseCirclesOrigins() {
MjGizmos.DrawWireCapsule(Vector3.zero, 0.5f, 1.0f);
Assert.That((_arc[0].Item1 - new Vector3(0, 0.5f, 0)).magnitude, Is.LessThan(1e-3f));
Assert.That((_arc[1].Item1 - new Vector3(0, -0.5f, 0)).magnitude, Is.LessThan(1e-3f));
}
[Test]
public void CapsuleBaseCirclesRadiuses() {
MjGizmos.DrawWireCapsule(Vector3.zero, 0.5f, 1.0f);
Assert.That(_arc[0].Item2, Is.EqualTo(0.5f));
Assert.That(_arc[1].Item2, Is.EqualTo(0.5f));
}
[Test]
public void CapsuleBaseArcsOrigins() {
MjGizmos.DrawWireCapsule(Vector3.zero, 0.5f, 1.0f);
Assert.That((_arc[2].Item1 - new Vector3(0, -0.5f, 0)).magnitude, Is.LessThan(1e-3f));
Assert.That((_arc[3].Item1 - new Vector3(0, 0.5f, 0)).magnitude, Is.LessThan(1e-3f));
Assert.That((_arc[4].Item1 - new Vector3(0, 0.5f, 0)).magnitude, Is.LessThan(1e-3f));
Assert.That((_arc[5].Item1 - new Vector3(0, -0.5f, 0)).magnitude, Is.LessThan(1e-3f));
}
[Test]
public void CapsuleBaseArcsRadiuses() {
MjGizmos.DrawWireCapsule(Vector3.zero, 0.5f, 1.0f);
Assert.That(_arc[2].Item2, Is.EqualTo(0.5f));
Assert.That(_arc[3].Item2, Is.EqualTo(0.5f));
Assert.That(_arc[4].Item2, Is.EqualTo(0.5f));
Assert.That(_arc[5].Item2, Is.EqualTo(0.5f));
}
}
[TestFixture]
public class MjGizmosCylinderTests {
[SetUp]
public void SetUp() {
MjGizmos.DrawLine = MockDrawLine;
MjGizmos.DrawArc = MockDrawArc;
MjGizmos.NumCircleSegments = 4;
_arc = new List<Tuple<Vector3, float, Vector3, float, float>>();
}
[TearDown]
public void TearDown() {
MjGizmos.DrawLine = Gizmos.DrawLine;
MjGizmos.DrawArc = MjGizmos.DrawArcInternal;
MjGizmos.NumCircleSegments = 32;
}
private List<Tuple<Vector3, float, Vector3, float, float>> _arc;
private void MockDrawLine(Vector3 from, Vector3 to) {}
private void MockDrawArc(Vector3 position, float radius, Vector3 axis, float length,
float startAngle) {
_arc.Add(Tuple.Create(position, radius, axis, length, startAngle));
}
[Test]
public void NumberOfArcsUsedToDrawCylinder() {
MjGizmos.DrawWireCylinder(Vector3.zero, 0.5f, 1.0f);
Assert.That(_arc, Has.Count.EqualTo(2));
}
[Test]
public void CylinderBaseCirclesOrigins() {
MjGizmos.DrawWireCylinder(Vector3.zero, 0.5f, 1.0f);
Assert.That((_arc[0].Item1 - new Vector3(0, 0.5f, 0)).magnitude, Is.LessThan(1e-3f));
Assert.That((_arc[1].Item1 - new Vector3(0, -0.5f, 0)).magnitude, Is.LessThan(1e-3f));
}
[Test]
public void CylinderBaseCirclesRadiuses() {
MjGizmos.DrawWireCylinder(Vector3.zero, 0.5f, 1.0f);
Assert.That(_arc[0].Item2, Is.EqualTo(0.5f));
Assert.That(_arc[1].Item2, Is.EqualTo(0.5f));
}
}
[TestFixture]
public class MjGizmosPlaneTests {
[SetUp]
public void SetUp() {
MjGizmos.DrawLine = MockDrawLine;
_lines = new List<Tuple<Vector3, Vector3>>();
}
[TearDown]
public void TearDown() {
MjGizmos.DrawLine = Gizmos.DrawLine;
_lines.Clear();
}
private List<Tuple<Vector3, Vector3>> _lines;
private void MockDrawLine(Vector3 start, Vector3 end) {
_lines.Add(Tuple.Create(start, end));
}
[Test]
public void DrawingPlaneAroundArbitraryCenter() {
MjGizmos.DrawWirePlane(new Vector3(1, 2, 3), 1, 1);
Assert.That(_lines, Has.Count.EqualTo(5));
Assert.That(_lines[0].Item1, Is.EqualTo(new Vector3(0.5f, 2, 2.5f)));
Assert.That(_lines[0].Item2, Is.EqualTo(new Vector3(1.5f, 2, 2.5f)));
Assert.That(_lines[1].Item1, Is.EqualTo(new Vector3(1.5f, 2, 2.5f)));
Assert.That(_lines[1].Item2, Is.EqualTo(new Vector3(1.5f, 2, 3.5f)));
Assert.That(_lines[2].Item1, Is.EqualTo(new Vector3(1.5f, 2, 3.5f)));
Assert.That(_lines[2].Item2, Is.EqualTo(new Vector3(0.5f, 2, 3.5f)));
Assert.That(_lines[3].Item1, Is.EqualTo(new Vector3(0.5f, 2, 3.5f)));
Assert.That(_lines[3].Item2, Is.EqualTo(new Vector3(0.5f, 2, 2.5f)));
Assert.That(_lines[4].Item1, Is.EqualTo(new Vector3(0.5f, 2, 2.5f)));
Assert.That(_lines[4].Item2, Is.EqualTo(new Vector3(1.5f, 2, 3.5f)));
}
[Test]
public void DrawingPlaneWithCorrectDimensions() {
MjGizmos.DrawWirePlane(Vector3.zero, width: 2, height: 4);
Assert.That(_lines[0].Item1, Is.EqualTo(new Vector3(-1, 0, -2)));
Assert.That(_lines[0].Item2, Is.EqualTo(new Vector3(1, 0, -2)));
Assert.That(_lines[1].Item1, Is.EqualTo(new Vector3(1, 0, -2)));
Assert.That(_lines[1].Item2, Is.EqualTo(new Vector3(1, 0, 2)));
Assert.That(_lines[2].Item1, Is.EqualTo(new Vector3(1, 0, 2)));
Assert.That(_lines[2].Item2, Is.EqualTo(new Vector3(-1, 0, 2)));
Assert.That(_lines[3].Item1, Is.EqualTo(new Vector3(-1, 0, 2)));
Assert.That(_lines[3].Item2, Is.EqualTo(new Vector3(-1, 0, -2)));
Assert.That(_lines[4].Item1, Is.EqualTo(new Vector3(-1, 0, -2)));
Assert.That(_lines[4].Item2, Is.EqualTo(new Vector3(1, 0, 2)));
}
}
}