Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
// stuff that might come into use later
#include "main.hpp"
#include "stm32f4xx_hal.h"
#define MIDI_OUT_Pin GPIO_PIN_6
#define MIDI_OUT_GPIO_Port GPIOC
#define MIDI_IN_Pin GPIO_PIN_7
#define MIDI_IN_GPIO_Port GPIOC
#define MIDI_OUT_DETECT_Pin GPIO_PIN_9
#define MIDI_OUT_DETECT_GPIO_Port GPIOC
ADC_HandleTypeDef hadc1;
UART_HandleTypeDef huart6;
void MX_USART6_UART_Init(void);
void MX_ADC1_Init(void);
/* ADC1 init function */
void MX_ADC1_Init(void)
{
ADC_ChannelConfTypeDef sConfig;
static GPIO_InitTypeDef GPIO_InitStruct;
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
*/
__GPIOC_CLK_ENABLE();
__ADC1_CLK_ENABLE();
__HAL_RCC_ADC1_CLK_ENABLE();
/**ADC1 GPIO Configuration
PC4 ------> ADC1_IN14
*/
GPIO_InitStruct.Pin = GPIO_PIN_4;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
hadc1.Instance = ADC1;
hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
hadc1.Init.ScanConvMode = DISABLE;
hadc1.Init.ContinuousConvMode = ENABLE;
hadc1.Init.DiscontinuousConvMode = DISABLE;
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
hadc1.Init.NbrOfConversion = 1;
hadc1.Init.DMAContinuousRequests = DISABLE;
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
HAL_ADC_Init(&hadc1);
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
*/
sConfig.Channel = ADC_CHANNEL_14;
sConfig.Rank = 1;
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
HAL_ADC_ConfigChannel(&hadc1, &sConfig);
}
/* USART6 init function */
void MX_USART6_UART_Init(void)
{
static GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.Pin = MIDI_OUT_Pin|MIDI_IN_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF8_USART6;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
huart6.Instance = USART6;
huart6.Init.BaudRate = 31250;
huart6.Init.WordLength = UART_WORDLENGTH_8B;
huart6.Init.StopBits = UART_STOPBITS_1;
huart6.Init.Parity = UART_PARITY_NONE;
huart6.Init.Mode = UART_MODE_TX_RX;
huart6.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart6.Init.OverSampling = UART_OVERSAMPLING_16;
HAL_UART_Init(&huart6);
}
#if 0
uint16_t brightnessTestResult[46000];
void runBrigthnessTest();
void runBrigthnessTest()
{
volatile uint32_t nextReadoutTime = 0;
uint16_t result = 0;
uint16_t i = 0;
grid_setLedOutputDirectly(0, 0, 1001, 1001, 1001);
grid_setLedOutputDirectly(1, 0, 1001, 47000, 47000);
grid_setLedOutputDirectly(2, 0, 47000, 1001, 47000);
grid_setLedOutputDirectly(3, 0, 47000, 47000, 1001);
grid_setLedOutputDirectly(9, 4, 47000, 47000, 47000);
nextReadoutTime = HAL_GetTick() + 10000; // 10s delay at the start
while (HAL_GetTick() < nextReadoutTime)
{};
for (i=47000; i>1000;--i)
{
grid_setLedOutputDirectly(9, 4, i, 47000, 47000);
nextReadoutTime = HAL_GetTick() + 10; // 10ms delay
while (HAL_GetTick() < nextReadoutTime)
{};
HAL_ADC_Start(&hadc1);
if (HAL_ADC_PollForConversion(&hadc1, 1000) == HAL_OK)
{
result = HAL_ADC_GetValue(&hadc1);
brightnessTestResult[47000-i] = result;
if (4095 == result)
{
break;
}
}
}
}
#endif
119b494bbThis file is pinned to the selected release. Download the original to open it in your design tool.