LibrePCB

#!/usr/bin/env python
# -*- coding: utf-8 -*-

import params
import pytest

"""
Test command "open-project --drc"
"""


@pytest.mark.parametrize("project", [params.EMPTY_PROJECT_LPP_PARAM])
def test_if_project_without_boards_succeeds(cli, project):
    cli.add_project(project.dir, as_lppz=project.is_lppz)
    # remove all boards
    with open(cli.abspath(project.dir + '/boards/boards.lp'), 'w') as f:
        f.write('(librepcb_boards)')
    code, stdout, stderr = cli.run('open-project', '--drc', project.path)
    assert stderr == ''
    assert stdout == \
        "Open project '{project.path}'...\n" \
        "Run DRC...\n" \
        "SUCCESS\n".format(project=project)
    assert code == 0


@pytest.mark.parametrize("project", [params.PROJECT_WITH_TWO_BOARDS_LPPZ_PARAM])
def test_project_with_two_boards_explicit_one(cli, project):
    cli.add_project(project.dir, as_lppz=project.is_lppz)
    code, stdout, stderr = cli.run('open-project', '--drc', '--board=copy',
                                   project.path)
    assert stderr == ''
    assert stdout == \
        "Open project '{project.path}'...\n" \
        "Run DRC...\n" \
        "  Board 'copy':\n" \
        "    Approved messages: 0\n" \
        "    Non-approved messages: 0\n" \
        "SUCCESS\n".format(project=project)
    assert code == 0


@pytest.mark.parametrize("project", [params.EMPTY_PROJECT_LPP_PARAM])
def test_board_with_approved_message(cli, project):
    cli.add_project(project.dir, as_lppz=project.is_lppz)
    # Add a hole with small diameter and the corresponding approval.
    with open(cli.abspath(project.dir + '/boards/default/board.lp'), 'r') as f:
        board_content = f.read()
    board_content = board_content.replace(
        '\n)\n',
        '\n (hole 82506db2-3323-4732-8480-f3517f10dd44 '
        '  (diameter 0.1) (stop_mask auto) (lock false)\n'
        '  (vertex (position 50.0 50.0) (angle 0.0))\n'
        ' )\n'
        ')\n'
    )
    board_content = board_content.replace(
        ' (design_rule_check\n',
        ' (design_rule_check\n'
        '  (approved minimum_drill_diameter_violation\n'
        '   (hole 82506db2-3323-4732-8480-f3517f10dd44)\n'
        '  )\n'
    )
    with open(cli.abspath(project.dir + '/boards/default/board.lp'), 'w') as f:
        f.write(board_content)
    code, stdout, stderr = cli.run('open-project', '--drc', project.path)
    assert stdout == \
        "Open project '{project.path}'...\n" \
        "Run DRC...\n" \
        "  Board 'default':\n" \
        "    Approved messages: 1\n" \
        "    Non-approved messages: 0\n" \
        "SUCCESS\n".format(project=project)
    assert code == 0


@pytest.mark.parametrize("project", [params.EMPTY_PROJECT_LPP_PARAM])
def test_board_without_messages(cli, project):
    cli.add_project(project.dir, as_lppz=project.is_lppz)
    code, stdout, stderr = cli.run('open-project', '--drc', project.path)
    assert stderr == ''
    assert stdout == \
        "Open project '{project.path}'...\n" \
        "Run DRC...\n" \
        "  Board 'default':\n" \
        "    Approved messages: 0\n" \
        "    Non-approved messages: 0\n" \
        "SUCCESS\n".format(project=project)
    assert code == 0


@pytest.mark.parametrize("project", [params.EMPTY_PROJECT_LPP_PARAM])
def test_board_with_nonapproved_message(cli, project):
    cli.add_project(project.dir, as_lppz=project.is_lppz)
    # Add a hole with small diameter.
    with open(cli.abspath(project.dir + '/boards/default/board.lp'), 'r') as f:
        board_content = f.read()
    board_content = board_content.replace(
        '\n)\n',
        '\n (hole 82506db2-3323-4732-8480-f3517f10dd44 '
        '  (diameter 0.1) (stop_mask auto) (lock false)\n'
        '  (vertex (position 50.0 50.0) (angle 0.0))\n'
        ' )\n'
        ')\n'
    )
    with open(cli.abspath(project.dir + '/boards/default/board.lp'), 'w') as f:
        f.write(board_content)
    code, stdout, stderr = cli.run('open-project', '--drc', project.path)
    assert stderr == "      - [WARNING] NPTH drill diameter: 0.1 < 0.25 mm\n"
    assert stdout == \
        "Open project '{project.path}'...\n" \
        "Run DRC...\n" \
        "  Board 'default':\n" \
        "    Approved messages: 0\n" \
        "    Non-approved messages: 1\n" \
        "Finished with errors!\n".format(project=project)
    assert code == 1


@pytest.mark.parametrize("project", [params.EMPTY_PROJECT_LPP_PARAM])
def test_with_custom_settings(cli, project):
    cli.add_project(project.dir, as_lppz=project.is_lppz)
    settings = """
      (design_rule_check
       (min_copper_width 0.2)
       (min_copper_copper_clearance 0.2)
       (min_copper_board_clearance 0.3)
       (min_copper_npth_clearance 0.2)
       (min_drill_drill_clearance 0.35)
       (min_drill_board_clearance 0.5)
       (min_annular_ring 0.15)
       (min_npth_drill_diameter 0.1234)
       (min_pth_drill_diameter 0.25)
       (min_npth_slot_width 1.0)
       (min_pth_slot_width 0.7)
       (min_outline_tool_diameter 2.0)
       (blind_vias_allowed true)
       (buried_vias_allowed true)
       (allowed_npth_slots single_segment_straight)
       (allowed_pth_slots single_segment_straight)
       (approvals_version "0.2")
      )
    """
    with open(cli.abspath('settings.lp'), mode='w') as f:
        f.write(settings)
    # Add a hole with small diameter.
    with open(cli.abspath(project.dir + '/boards/default/board.lp'), 'r') as f:
        board_content = f.read()
    board_content = board_content.replace(
        '\n)\n',
        '\n (hole 82506db2-3323-4732-8480-f3517f10dd44 '
        '  (diameter 0.1) (stop_mask auto) (lock false)\n'
        '  (vertex (position 50.0 50.0) (angle 0.0))\n'
        ' )\n'
        ')\n'
    )
    with open(cli.abspath(project.dir + '/boards/default/board.lp'), 'w') as f:
        f.write(board_content)
    code, stdout, stderr = cli.run('open-project',
                                   '--drc',
                                   '--drc-settings', 'settings.lp',
                                   project.path)
    assert stderr == "      - [WARNING] NPTH drill diameter: 0.1 < 0.1234 mm\n"
    assert stdout == \
        "Open project '{project.path}'...\n" \
        "Run DRC...\n" \
        "  Board 'default':\n" \
        "    Approved messages: 0\n" \
        "    Non-approved messages: 1\n" \
        "Finished with errors!\n".format(project=project)
    assert code == 1