librelane

# Copyright 2021-2022 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# flake8: noqa E402
import odb
from openroad import Tech, Design

import re
import sys
import json
import locale
import inspect
import functools
from decimal import Decimal
from fnmatch import fnmatch
from typing import Callable, Dict

# -- START: Environment Fixes
try:
    locale.setlocale(locale.LC_ALL, "C.UTF-8")
except locale.Error:
    # We tried. :)
    pass
# -- END

import click
import rich
from rich.table import Table

# Re-export for subfunctions
rich
click
Table
odb

write_fn: Dict[str, Callable] = {
    "def": lambda reader, file: file and reader.design.writeDef(file),
    "odb": lambda reader, file: file and reader.design.writeDb(file),
}
auto_handled_output_opts = [f"output_{key}" for key in write_fn]


class OdbReader(object):
    def __init__(self, *args, **kwargs):
        self.ord_tech = Tech()
        self.design = Design(self.ord_tech)

        if len(args) == 1:
            db_in = args[0]
            self.design.readDb(db_in)
        elif len(args) == 2:
            lef_in, def_in = args
            if not (isinstance(lef_in, list) or isinstance(lef_in, tuple)):
                lef_in = [lef_in]
            for lef in lef_in:
                self.ord_tech.readLef(lef)
            if def_in is not None:
                self.design.readDef(def_in)

        self.config = None
        if "config_path" in kwargs and kwargs["config_path"] is not None:
            self.config = json.load(
                open(kwargs["config_path"], encoding="utf8"),
                parse_float=Decimal,
            )

        self.db = self.ord_tech.getDB()
        self.tech = self.db.getTech()
        self.chip = self.db.getChip()
        self.layers = {l.getName(): l for l in self.tech.getLayers()}
        self.libs = self.db.getLibs()
        self.cells = {}
        for lib in self.libs:
            self.cells.update({m: m for m in lib.getMasters()})
        if self.chip is not None:
            self.block = self.db.getChip().getBlock()
            self.name = self.block.getName()
            self.rows = self.block.getRows()
            self.dbunits = self.block.getDefUnits()
            self.instances = self.block.getInsts()

        busbitchars = re.escape("[]")  # TODO: Get alternatives from LEF parser
        # dividerchar = re.escape("/")  # TODO: Get alternatives from LEF parser
        self.escape_verilog_rx = re.compile(rf"([{busbitchars}])")

    def add_lef(self, new_lef):
        self.ord_tech.readLef(new_lef)

    def escape_verilog_name(self, name_in: str) -> str:
        return self.escape_verilog_rx.sub(r"\\\1", name_in)

    def _dpl(self):
        """
        The ``._dpl()`` method is EXPERIMENTAL and SHOULD NOT BE USED YET.

        Use a composite step with ``OpenROAD.DetailedPlacement``.
        """
        if self.config is None:
            raise RuntimeError("Attempted to call dpl without config file")

        cell_pad_value = int(self.config["DPL_CELL_PADDING"])
        cell_pad_side = cell_pad_value // 2
        dpl = self.design.getOpendp()
        dpl.setPaddingGlobal(cell_pad_side, cell_pad_side)
        if wildcards := self.config["CELL_PAD_EXCLUDE"]:
            for wildcard in wildcards:
                masters = [
                    self.cells[name] for name in self.cells if fnmatch(name, wildcard)
                ]
                for master in masters:
                    dpl.setPadding(master, 0, 0)
        if diode_padding := self.config["DIODE_PADDING"]:
            name, _ = self.config["DIODE_CELL"].split("/")
            master = self.cells[name]
            dpl.setPadding(master, int(diode_padding), 0)

        dpl.detailedPlacement(
            self.config["PL_MAX_DISPLACEMENT_X"],
            self.config["PL_MAX_DISPLACEMENT_Y"],
        )
        dpl.reportLegalizationStats()
        dpl.optimizeMirroring()

    def _grt_setup(self, grt):
        grt.setAdjustment(float(self.config["GRT_ADJUSTMENT"]))

        routing_layers = [l for l in self.layers.values() if l.getRoutingLevel() >= 1]
        for layer, adj in zip(routing_layers, self.config["GRT_LAYER_ADJUSTMENTS"]):
            grt.addLayerAdjustment(
                layer.getRoutingLevel(),
                float(adj),
            )

        min_layer_name = self.config["RT_MIN_LAYER"]
        if not min_layer_name in self.layers:
            raise RuntimeError(f"Unknown layer name '{min_layer_name}'")
        min_layer_idx = self.layers[min_layer_name].getRoutingLevel()

        max_layer_name = self.config["RT_MAX_LAYER"]
        if not max_layer_name in self.layers:
            raise RuntimeError(f"Unknown layer name '{max_layer_name}'")
        max_layer_idx = self.layers[max_layer_name].getRoutingLevel()

        min_clk_idx = min_layer_idx
        if min_clk_name := self.config["RT_CLOCK_MIN_LAYER"]:
            if not min_clk_name in self.layers:
                raise RuntimeError(f"Unknown layer name '{min_clk_name}'")
            min_clk_idx = self.layers[min_clk_name].getRoutingLevel()

        max_clk_idx = max_layer_idx
        if max_clk_name := self.config["RT_CLOCK_MAX_LAYER"]:
            if not max_clk_name in self.layers:
                raise RuntimeError(f"Unknown layer name '{max_clk_name}'")
            max_clk_idx = self.layers[max_clk_name].getRoutingLevel()

        grt.setMinLayerForClock(min_clk_idx)
        grt.setMaxLayerForClock(max_clk_idx)
        grt.setMacroExtension(self.config["GRT_MACRO_EXTENSION"])
        grt.setOverflowIterations(self.config["GRT_OVERFLOW_ITERS"])
        grt.setAllowCongestion(self.config["GRT_ALLOW_CONGESTION"])
        grt.setVerbose(True)
        grt.initFastRoute(min_layer_idx, max_layer_idx)

    def _grt(self):
        """
        The ``._grt()`` method is EXPERIMENTAL and SHOULD NOT BE USED YET.

        Use a composite step with ``OpenROAD.GlobalRouting``.
        """
        if self.config is None:
            raise RuntimeError("Attempted to call grt without config file")

        grt = self.design.getGlobalRouter()
        self._grt_setup(grt)
        grt.globalRoute(
            True
        )  # The first variable updates guides- not sure why the default is False


def click_odb(function):
    @functools.wraps(function)
    def wrapper(input_db, input_lefs, config_path, **kwargs):
        reader = OdbReader(input_db, config_path=config_path)

        signature = inspect.signature(function)
        parameter_keys = signature.parameters.keys()

        kwargs = kwargs.copy()
        kwargs["reader"] = reader

        outputs = []
        for key, value in kwargs.items():
            if key in auto_handled_output_opts:
                id = key[7:]
                outputs.append((id, value))

        kwargs = {
            k: kwargs[k] for k in kwargs.keys() if not k in auto_handled_output_opts
        }

        if "input_db" in parameter_keys:
            kwargs["input_db"] = input_db
        if "input_lefs" in parameter_keys:
            kwargs["input_lefs"] = input_lefs

        if input_db.endswith(".def"):
            print(
                "Error: Invocation was not updated to use an odb file.", file=sys.stderr
            )
            exit(1)
        function(**kwargs)

        for format, path in outputs:
            fn = write_fn[format]
            fn(reader, path)

    for format in write_fn:
        wrapper = click.option(
            f"--output-{format}",
            default=None,
            help=f"Write {format} view",
        )(wrapper)

    wrapper = click.option(
        "-l",
        "--input-lef",
        "input_lefs",
        default=(),
        help="LEF file needed to have a proper view of the DEF files",
        multiple=True,
    )(wrapper)
    wrapper = click.option(
        "--step-config",
        "config_path",
        type=click.Path(exists=True, dir_okay=False, file_okay=True, readable=True),
        required=False,
    )(wrapper)
    wrapper = click.argument("input_db")(wrapper)

    return wrapper