Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
9c0a35f75This file is pinned to the selected release. Download the original to open it in your design tool.
Casing
------
The [laser-cut-case.ps](./laser-cut-case.ps) PostScript file is a somewhat
parametrized source for making an acrylic case for LDGraphy.
Use black or dark-red acrylic for all parts except the sled to prevent the
405nm laser to escape in eye-damaging levels. The sled should be cut from
fluorescing material.
**Do not** use glass-clear transparent acrylic for the real machine, a 500mW
laser can blind you!
### How to cut
The file covers several parts, and depending on which you can fit
on your acrylic sheet and/or which you have to re-do, you can choose the ones
to be output in the first section that defines the
[`/print-...`](./laser-cut-case.ps#L28) boolean variables.
The Makefile can create a dxf file that is then usable in any laser cutter, just
call `make`.
There are several colored output layers that have different meaning for your
set-up in the laser cutter:
* the 'green layer'. Set to scan engraving.
* the 'blue layer'. Set to vector engraving.
Do the engravings first. Then:
* the 'black layer'. Cut with outward kerf correction (laser cuts outside).
* the 'red layer'. Cut with inside kerf correction (laser cuts inside).
* the 'yellow layer': Set to straight cut, no kerf correction.
Don't cut
* the 'gray layer' (if `/print-measures` true). Don't cut. Just FYI with measurements and help-lines.
### Customization
If you have a different size PCB that you want to expose, you can customize
the values in the PostScript file an generate a new DXF that should fit your
use-case. Be aware that wider boards means wider exposure angle which in
turn means more variation in focus distance (i.e. on average less sharp image).
Start with modifying `/pcb-w-mm` and `/pcb-h-mm`, watch the PostScript file in
a viewer (e.g. okular). It helps to switch on `/print-measures` while doing
these modifications for more information.
Now, modify the `/scan-angle` so that the polygon mirror fits on the top panel.
You might also need to change `/scan-redirect-mirror-distance` to have the
redirect mirror or its reflected beam not conflict with any object.
### Note
Nearing final state, ready to be used. This is fully parametrized, but
PostScript is not the very best 2D CAD software and updating things is not
so easy. I'd be happy if someone could translate that
into e.g. [Solvespace] CAD. Pull requests welcome :)
### Cut pattern


[Solvespace]: http://solvespace.com/