Loading project Things
Specification and later documentation for KORUZA open source open hardware router
Loading README and project media…
KORUZA router is an open hardware open software development of a routing platform to be used in wireless optical system KORUZA as the control and routing platform as well as secondarily as management for wireless outdoor routers typically used in mesh networks. This repository currently serves as the ongoing requirements base for developing such a device.
Router specification is developed using the following approach. Issues opened in this repository discuss and comment features. Requirements file implements the features from all Issues in a document to communicate with the manufacturer. Please comment in Issues or push suggested changes to requirements.
This router is the heart of KORUZA system and runs all applicaiton specific code, alignment algorithms and user interface. It is connected with the following:
Internally:
Externally:
Used to connect different outdoor wireless routers together and power them with added management, much like existing Ubiquiti and Mikrotik devices with such support, however being completely open, versatile and running open software with external peripherals well supported
The "reference" design used for this specification is MqMaker WiTi board https://mqmaker.com/ which is open hardware developed for home router application. We aim to change it for mesh routing and such type of development.
Requirements are a separate file and entries there are based on closing issues.
Hereby we list all the different ideas that could be included, later defined in specification if accepted. Please open an issue for every feature and we will discuss if it should be implemented or not.
All our projects are as usefully open-source as possible.
Hardware including documentation is licensed under CERN OHL v.1.2. license
Firmware and software originating from the project is licensed under GNU GENERAL PUBLIC LICENSE v3.
Open data generated by our projects is licensed under CC0.
All our websites and additional documentation are licensed under [Creative Commons Attribution-ShareAlike 4 .0 Unported License] (https://creativecommons.org/licenses/by-sa/4.0/legalcode).
What this means is that you can use hardware, firmware, software and documentation without paying a royalty and knowing that you'll be able to use your version forever. You are also free to make changes but if you share these changes then you have to do so on the same conditions that you enjoy.
Koruza, GoodEnoughCNC and IRNAS are all names and marks of Institut IRNAS Rače. You may use these names and terms only to attribute the appropriate entity as required by the Open Licences referred to above. You may not use them in any other way and in particular you may not use them to imply endorsement or authorization of any hardware that you design, make or sell.