KiCadRoutingTools

{
  "board": {
    "design_settings": {
      "rules": {
        "min_clearance": 0.15,
        "min_hole_clearance": 0.15,
        "min_hole_to_hole": 0.25,
        "min_copper_edge_clearance": 0.3,
        "min_track_width": 0.15,
        "min_via_diameter": 0.45,
        "min_through_hole_diameter": 0.25,
        "min_via_drill": 0.25
      },
      "rule_severities": {}
    }
  },
  "meta": {
    "filename": "board.kicad_pro",
    "version": 1
  },
  "net_settings": {
    "classes": [
      {
        "bus_width": 12,
        "clearance": 0.15,
        "diff_pair_gap": 0.25,
        "diff_pair_via_gap": 0.25,
        "diff_pair_width": 0.2,
        "line_style": 0,
        "microvia_diameter": 0.3,
        "microvia_drill": 0.2,
        "name": "Default",
        "pcb_color": "rgba(0, 0, 0, 0.000)",
        "priority": 2147483647,
        "schematic_color": "rgba(0, 0, 0, 0.000)",
        "track_width": 0.15,
        "via_diameter": 0.45,
        "via_drill": 0.25,
        "wire_width": 6
      }
    ],
    "meta": {
      "version": 0
    }
  },
  "kicad_routing_tools": {
    "floor_provenance": {
      "authored_by": "run25 orchestrator, before any placement/routing tool ran (brief step 1, #441)",
      "floors": {
        "clearance": 0.15,
        "track_width": 0.15,
        "via_diameter": 0.45,
        "via_drill": 0.25,
        "hole_to_hole": 0.25,
        "copper_edge": 0.3
      },
      "note": "fix_kicad_drc_settings capped min_clearance and the Default class at the 0.0508 mm pad override found on C1/C3/Q1/Q2/U2; both hand-raised to the declared 0.15 floor (KiCad floors a pad override at rules.min_clearance, so 0.15 is what every checker grades). Class draw defaults set to the declared sizes.",
      "escalation": "board"
    }
  }
}