Various KiCad Footprints and Symbols for various Projects
Loading README and project media…
Various KiCad Footprints and Symbols for various Projects
Philipp Schilk, 2020-2021
https://github.com/TheSchilk/KiCad_Devices
I make no guarantees about the devices in this repository. Please do your own due diligence.
| Device | Symbol | Footprint |
|---|---|---|
| 74HC161 4Bit Sync Counter with par. load and async clear | ![]() | |
| 74HC594 8-bit serial-in parallel-out shift register with async clear. | ![]() | |
| 74LVC1G157 2in 1out Mux | ![]() | |
| 74LVC2G53 2-1 Analog Switch (Did not like KiCad Symbol) | ![]() | |
| ACHS-712x Isolated Hall Effect-Based Current Sensor. | ![]() | |
| ACS710 Isolated MEMS Current Sensor | ![]() | |
| AD8223 Single-Supply, Low Cost Instrumentation Amplifier | ![]() | |
| AD8293 Single-Supply, Low Cost Instrumentation Amplifier | ![]() | |
| ALPS_SPUN191400 Switch | Use Default KiCad "Switch:SW_DPDT_x2" | ![]() |
| AP3012 Simple Boost Converter IC | ![]() | |
| ARM SWD 1.27mm 2x5 Serial wire Debug Connector used by many ARM MCUs. Footprint allows for both SMD and TH jack. Includes footprint with and without solder paste | ![]() | ![]() |
| ATF16V8C CPLD | ![]() | |
| BarrelPolarity Smaller barrel jack polarity indicator. | ![]() | ![]() |
| Bourns 3362P Small TH Trimmer pot | ![]() | |
| CD40109B CMOS Quad Lo-to-Hi Vltg Level Shifter. | ![]() | |
| DGD05473 High Freq. High and Low Side Gate Driver. | ![]() | |
| DIN5_MIDI A TH, Right-angle MIDI Jack. | Use DIN-5 | ![]() |
| DPDT_4mm_2.5mm_TH STATUS: Untested | ![]() | |
| DPDT_5.6mm_2.5mm_SMD STATUS: Untested | ![]() | |
| Finder 40.62 Dual throw relay | ![]() | |
| ICM-20689 6DOF Acc + Gyro | ![]() | |
| INA280 Current Sense Amplifier | ![]() | |
| IS62C256AL | ![]() | ![]() |
| DGD05473 High Freq. High and Low Side Gate Driver. | ![]() | ![]() |
| Jack 3.5mm PJ-313D-6A STATUS: Untested | Use Connector:AudioJack3 | ![]() |
| Jack 3.5mm Switchcraft 35RASMT4BHNTRX STATUS: Untested, Maybe Borked?! | Use Connector:AudioJack3_SwitchTR | ![]() |
| JLCPCB SMT Assembly Tooling Hole | ![]() | |
| KobiCon_161-4220-E Dual RCA Stereo RCA Jack | Use "RCA_Stereo" from this repo | |
| LDK320 LDK220 Very small footprint voltage regulators. | ![]() | Symbols kompatible with SOT32-5 and SOT323-5 pinouts. |
| Leader SMS405 SMD Shield | ![]() | |
| LM4910 Stereo Headphone Amp | ![]() | |
| LMV7235 High-speed, low-voltage, comparator | ![]() | |
| MAX7601 Voltage Reference | ![]() | |
| MIC5270 Very small footprint negative linearvoltage regulators. | ![]() | |
| NoRef Footprints Standard footprints with no silkscreen reference. | Including 0603 R/C/LED 4xRN, 0402 R/LED, TH 5mm LED ![]() | |
| OMRON G6K-2F-Y Relay Untested | ![]() | ![]() |
| OPA145DBV | ![]() | |
| Panasonic TQ2SA Relay | ![]() | ![]() |
| PIC12F1571 PIC12F1572 | ![]() | |
| PLCC-32_11.4x14.0mm_P1.27mm_SMD-Socket | ![]() | |
| QMC5883l 3-Axis Compass/Mag | ![]() | |
| Q_NMOS_SSSGD NMOS with SSSGD Pinout. (i.e. BUK9Y38-100) | ![]() | |
| RCA_Stereo Generic Stereo RCA Connector | ![]() | |
| RGB_LED_1.6x1.6x0.6 | ![]() | |
| Si875x Isolated FET Driver | ![]() | |
| SN74LVC4245A BiDirectional, Tristate-able, LevelShifting Octal Buffer | ![]() | |
| SN76489 Programmable Tone Generators, Programmable White Noise Generator | ![]() | |
| SOT763-1_DHVQFN16 STATUS: Untested | ![]() | |
| SOT764-1_DHVQFN20 STATUS: Untested | ![]() | |
| Spitznagel SPK 0551212 Small TH Mains Transformer | ![]() | |
| SSD1309_24PinInterface Symbol for Connector for OLEDs with SSD1309 IC that expose 24 pins. | ![]() | |
| SST39SF0x0_TSOP SST39SF0x0 Memories with TSOP-32 Pinout. | ![]() | |
| STM32G483CEUx STM32 MCU (not yet in KiCad Repo) | ![]() | |
| ST STDC14 Connector Extended ARM SWD Connector used by ST-Link-v3. | ![]() | |
| TE Connectivity 284093-[2,3,4] 2/3/4 position, Vertical wire entry screw terminals. | ![]() | |
| TPS63700 -15V to -2V inverting DC/DC Converter | ![]() | |
| TRS_6.35mm_PCB STATUS: Untested. | Use AudioJack3_Switch Or no/less switches | ![]() |
| Vishay_WSL3637 Large, Kelvin-Connection Current Sensing Resistor. Note that there is a different footprint for smaller resistances. | Use R_Shunt. | ![]() |
| VOM1271 Optocoupler with photodiode output | ![]() | |
| Vishay WSK1216 Current Shunt. | ![]() | |
| XSD-C4649_TO220_Heatsink Small, cheap, TO220 Heatsink | Use Heatsink or Heatsink_Pad | ![]() |
| YM2612 Vintage 6 Ch, 4 Operator FM Synth IC | ![]() |
This file is managed using a python script (_Library_Manager/LibraryManager.py)
Each Device features a Device.json file, which is parsed by this script to extract all relevant information for this file.
To re-generate this README, run:
> make
In the root of this repository.