Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
e2485c351This file is pinned to the selected release. Download the original to open it in your design tool.
{
"//": "DO NOT EDIT THIS FILE before reading the comments below:",
"//": "This is the default configuration for Tiny Tapeout projects. It should fit most designs.",
"//": "If you change it, please make sure you understand what you are doing. We are not responsible",
"//": "if your project fails because of a bad configuration.",
"//": "!!! DO NOT EDIT THIS FILE unless you know what you are doing !!!",
"//": "If you get stuck with this config, please open an issue or get in touch via the discord.",
"//": "Here are some of the variables you may want to change:",
"//": "PL_TARGET_DENSITY_PCT - You can increase this if Global Placement fails with error GPL-0302.",
"//": "Users have reported that values up to 80 worked well for them.",
"PL_TARGET_DENSITY_PCT": 65,
"//": "CLOCK_PERIOD - Increase this in case you are getting setup time violations.",
"//": "The value is in nanoseconds, so 20ns == 50MHz.",
"CLOCK_PERIOD": 20,
"//": "Hold slack margin - Increase them in case you are getting hold violations.",
"PL_RESIZER_HOLD_SLACK_MARGIN": 0.1,
"GRT_RESIZER_HOLD_SLACK_MARGIN": 0.05,
"//": "RUN_LINTER, LINTER_INCLUDE_PDK_MODELS - Disabling the linter is not recommended!",
"RUN_LINTER": 1,
"LINTER_INCLUDE_PDK_MODELS": 1,
"//": "If you need a custom clock configuration, read the following documentation first:",
"//": "https://tinytapeout.com/faq/#how-can-i-map-an-additional-external-clock-to-one-of-the-gpios",
"CLOCK_PORT": "clk",
"//": "Configuration docs: https://librelane.readthedocs.io/en/latest/reference/configuration.html",
"//": "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!",
"//": "!!! DO NOT CHANGE ANYTHING BELOW THIS POINT !!!",
"//": "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!",
"//": "Save some time",
"RUN_KLAYOUT_XOR": 0,
"RUN_KLAYOUT_DRC": 0,
"//": "Don't put clock buffers on the outputs",
"DESIGN_REPAIR_BUFFER_OUTPUT_PORTS": 0,
"//": "Reduce wasted space",
"TOP_MARGIN_MULT": 1,
"BOTTOM_MARGIN_MULT": 1,
"LEFT_MARGIN_MULT": 6,
"RIGHT_MARGIN_MULT": 6,
"//": "Absolute die size",
"FP_SIZING": "absolute",
"GRT_ALLOW_CONGESTION": 1,
"FP_IO_HLENGTH": 2,
"FP_IO_VLENGTH": 2,
"FP_PDN_VPITCH": 38.87,
"//": "Clock",
"RUN_CTS": 1,
"//": "Don't generate power rings",
"FP_PDN_MULTILAYER": 0,
"//": "MAGIC_DEF_LABELS may cause issues with LVS",
"MAGIC_DEF_LABELS": 0,
"//": "Only export pin area in LEF (without any connected nets)",
"MAGIC_WRITE_LEF_PINONLY": 1
}