Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
1154267f2This file is pinned to the selected release. Download the original to open it in your design tool.
/*
Copyright 2021-2025 Marc Ketel
SPDX-License-Identifier: Apache-2.0
*/
#include <esp32-hal-cpu.h>
#include <Wire.h>
#include <IoAbstraction.h>
#include <TaskManagerIO.h>
#include "HeatController.h"
#include "config.h"
#include "display.h"
#include "main.h"
#include "webserverc.h"
#include "wific.h"
volatile int encoderValue = 30;
void onEncoderChange(int newValue) {
RequestDrawDisplay();
if (newValue > 0 && encoderValue < 600) {
encoderValue += 5;
}
if (newValue < 0 && encoderValue > -10) {
encoderValue -= 5;
}
/*
if (newValue < 0)
Serial.println("down");
else
Serial.println("up");
*/
float celsius = encoderValue;
HeatController.setTargetTemperature(celsius + 273.15f);
}
void onSpinwheelClicked(uint8_t pin, bool heldDown) {
Serial.print("Button pressed ");
Serial.println(heldDown ? "Held" : "Pressed");
/*
u8g2.beginSimple();
u8g2.setPowerSave(0);
*/
if (heldDown == false) {
HEATER_STATE state = HeatController.getHeaterState();
if (state == HEATER_STATE::OFF) {
HeatController.setHeaterState(HEATER_STATE::ON);
} else {
HeatController.setHeaterState(HEATER_STATE::OFF);
}
}
/*
FirmwareVersion_t fv = HeatController.getFirmwareVersion();
Serial.println(String("Version heatcontroller: ") + String(fv.x) + String(".") + String(fv.y) + String(".") + String(fv.z));
SerialNumber_t sn = HeatController.getSerialNumber();
Serial.println(String("Serial number heatcontroller: ") + String(sn.word0, HEX) + String(" ") + String(sn.word1, HEX) + String(" ") + String(sn.word2, HEX) + String(" ") + String(sn.word3, HEX) );
uint16_t const1 = HeatController.getConst1();
Serial.println(String("Const1 heatcontroller: 0x") + String(const1, HEX) );
float const2 = HeatController.getConst2();
Serial.println(String("Const2 heatcontroller: ") + String(const2, 6));
*/
}
void setup() {
Wire.begin(SDA, SCL, 400000U);
Serial.begin(115200);
Serial.println(F("Booting"));
setCpuFrequencyMhz(80);
Serial.println(String(F("CPU freq: ")) + String(ESP.getCpuFreqMHz()) + String(F("MHz")));
Serial.println(String(F("Flash size: ")) + String(ESP.getFlashChipSize() / 1024 / 1024) + String(F("MiB")));
DisplaySetup();
pinMode(PIN_ROT_A, PULLUP);
pinMode(PIN_ROT_B, PULLUP);
pinMode(PIN_ROT_SW, PULLUP);
switches.initialiseInterrupt(ioUsingArduino(), true);
switches.addSwitch(PIN_ROT_SW, onSpinwheelClicked);
setupRotaryEncoderWithInterrupt(PIN_ROT_A, PIN_ROT_B, onEncoderChange);
switches.changeEncoderPrecision(0, 0);
WificSetup();
pinMode(PIN_LCD_LED, OUTPUT);
digitalWrite(PIN_LCD_LED, 1);
HeatController.init();
taskManager.scheduleFixedRate(
200, [] {
RequestDrawDisplay();
},
TIME_MILLIS);
}
void CriticalLoop() {
HeatController.loop();
taskManager.yieldForMicros(0);
yield();
}
void loop() {
CriticalLoop();
taskManager.runLoop();
WiFicLoop();
WebservercLoop();
DisplayLoop();
}