Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
2221b28cdThis file is pinned to the selected release. Download the original to open it in your design tool.
# Patch Panel

A parametric keystone patch panel for the HomeRacker system. Holds standard keystone jacks in a configurable grid with optional lock pin ears on each edge for mounting to HomeRacker frames.
## Design
- **Faceplate** — Front slab with cutouts sized for standard keystone jack faceplates.
- **Keystone pockets** — Walled channels behind each opening with a clip retention plate to hold keystones in place.
- **Ears** — Optional extensions on each edge with lock pin holes on a 15mm grid for HomeRacker mounting.
- **Corner notches** — Optional cutouts at corners to fit around HomeRacker connectors.
Panel dimensions automatically snap to the 15mm BASE_UNIT grid for clean alignment with the HomeRacker system.
## Parameters
### Grid
| Parameter | Default | Description |
| --------------------- | ------- | ------------------------------------------------------- |
| `columns` | 6 | Number of keystone columns |
| `rows` | 2 | Number of keystone rows |
| `col_pitch` | 25 mm | Horizontal spacing between keystones (center-to-center) |
| `row_pitch` | 30 mm | Vertical spacing between keystones (center-to-center) |
| `faceplate_thickness` | 2 mm | Faceplate thickness |
### Ears
| Parameter | Default | Description |
| ------------------------------ | ------- | ------------------------------------------------- |
| `margin_left/right/top/bottom` | 0 mm | Extra margin on each side |
| `connector_notch` | true | Notch corners to fit around HomeRacker connectors |
| `center_keystones` | false | Center keystone grid within the full panel |
| `pins_top/bottom/left/right` | true | Enable lock pin holes on each edge |
### Hidden (advanced)
Keystone opening dimensions, clip plate geometry, and pocket wall thickness are configurable in the Hidden section for non-standard keystone jacks.
## Dependencies
- [BOSL2](https://github.com/BelfrySCAD/BOSL2)
- [homeracker](https://github.com/kellerlabs/homeracker) core library (for `constants.scad` and `support.scad`)
## Printing Tips
- Print face-down for a smooth front surface.
- Test fit with a single keystone jack before printing a full panel, adjusting `keystone_faceplate_width` if needed.