For latest version, go to http://hacks.esar.org.uk/
How to use:
- Manufacture the HDMI receiver board that can be found in
the 'board' directory (CADSoft Eagle format).
- Open the 'fpga/hdmilight.xise' project in Xilinx ISE and
generate a bit file.
- Edit the files under the config directory to configure
the LEDs.
- Edit 'Makefile' in the top level directory and set
the DATA2MEM path for the Xilinx data2mem tool location
on your system.
- Run 'make' in the top level directory, which will build
'tools/makemem', then the firmware image, then the config
files, before merging the firmware and config into the
final bitfile.
The final result should be hdmilight.bit in the top
level directory.
- Upload hdmilight.bit to a Papilio Pro FPGA board
- Install the HDMI receiver board on to the Papilio board.
- Connect LED strips to output pins
- Open a serial terminal to the Papilio
- Connect HDMI source to receiver board
- It should now be working.