Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
EvvGC - Open Source 3 axis gimbal controller (hardware files)
======================
20130711 - initial creation and population of files
20130712 - updated vpre1.3ce2 with Digikey BOM, and a few part substitutions, no layout changes
20130712 - SandSquid link to the vpre1.3ce2 BOM - ~~http://www.sandsquid.com/#2FwTDG~~
20130714 - Updated vpre1.3ce2 componets R5, R13, R14 from 1k resistors to 10k to better match the STM spec
20130715 - No changes, just a quick sync of the 1.3ce2 documents and the OSH/Stencil file
20130802 - vpre1.3ce2 - SandSquid updated to include female housing/pins - ~~http://www.sandsquid.com/#b4xPP5~~
20130820 - vpre1.3ce2 - until further notice the online BOM on sandsquid isn't working... I'm working with the company to fix it
they have some issues on their side
20130822 - vpre1.3ce2 - updated actual altium documents to reflect the resistor change on the green diodes. Combined it with other
330ohm resistors so you'd only have to order more of the same as opposed a new line item.
- updated the sandsquid BOM - link is ~~http://www.sandsquid.com/#wL1Nhu~~
20131107 - vpre1.3ce2 - updated XLS BOM file to reflect component changes for better heat distribution
1c95104efThis file is pinned to the selected release. Download the original to open it in your design tool.