Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
ce5e6c479This file is pinned to the selected release. Download the original to open it in your design tool.
-------------------------------------------------------------------------
-- H264 buffer - VHDL
--
-- Written by Andy Henson
-- Copyright (c) 2008 Zexia Access Ltd
-- All rights reserved.
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions are met:
-- * Redistributions of source code must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- * Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
-- * Neither the name of the Zexia Access Ltd nor the
-- names of its contributors may be used to endorse or promote products
-- derived from this software without specific prior written permission.
--
-- THIS SOFTWARE IS PROVIDED BY ZEXIA ACCESS LTD ``AS IS'' AND ANY
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-- DISCLAIMED. IN NO EVENT SHALL ZEXIA ACCESS LTD OR ANDY HENSON BE LIABLE FOR ANY
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-------------------------------------------------------------------------
-- This is the buffer which takes intra or inter predicted output
-- after transform and quantise, and stores it pending the moment
-- to feed it to the CAVLC unit for output.
-- It is stored in the buffer partly so the luma and chroma prediction
-- and transform computations can be overlapped, and later output
-- in the correct order, but also so the header information can be
-- output before the data.
-- We store it before the CAVLC pass because, although typically larger,
-- the size is more predictable. There's enough size to store two chroma
-- copies but only one luma copy because the chroma is output last.
-- input order:
-- luma0, chromadcA, chromaA0, luma1
-- luma2, chromaA1, luma3
-- luma4, chromaA2, luma6
-- luma6, chromaA3, luma7
-- luma8, chromadcB, chromaB0, luma9
-- luma10, chromaB1, luma11
-- luma12, chromaB2, luma13
-- luma14, chromaB3, luma15
-- output order (once all luma is in):
-- luma0..luma15
-- chromadcA, chromadcB
-- chromaA0..3, chromaB0..3
-- nb: chroma comes in as 16beat packets, out as 15beat ones (no final dc coeff)
-- Amount of storage: 16x16 = 256 words of luma
-- 4x15 = 60 words of ac chroma, Cr and Cb x two sets = 240
-- 4 words of ac chroma, Cr and Cb x two sets = 16
-- XST: 200MHz, 64 slices + 1 BRAM
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
use ieee.numeric_std.ALL;
entity h264buffer is
port (
CLK : in std_logic; --clock
NEWSLICE : in std_logic; --reset: this is the first in a slice
NEWLINE : in std_logic; --this is the first in a line
--
VALIDI : in std_logic; --luma/chroma data here (15/16/4 of these)
ZIN : in std_logic_vector(11 downto 0); --luma/chroma data
READYI : out std_logic := '0'; --set when ready for next luma/chroma
CCIN : out std_logic := '0'; --set when inputting chroma
DONE : out std_logic := '0'; --set when all done and quiescent
--
VOUT : out std_logic_vector(11 downto 0) := (others=>'0'); --luma/chroma data
VALIDO : out std_logic := '0'; --strobe for data out
--
NLOAD : out std_logic := '0'; --load for CAVLC NOUT
NX : out std_logic_vector(2 downto 0) := b"000"; --X value for NIN/NOUT
NY : out std_logic_vector(2 downto 0) := b"000"; --Y value for NIN/NOUT
NV : out std_logic_vector(1 downto 0) := b"00"; --valid flags for NIN/NOUT (1=left, 2=top, 3=avg)
NXINC : out std_logic := '0'; --increment for X macroblock counter
--
READYO : in std_logic; --from cavlc module (goes inactive after block starts)
TREADYO : in std_logic; --from tobytes module: tells it to freeze
HVALID : in std_logic --when header module outputting
);
end h264buffer;
architecture hw of h264buffer is
type Tbuf is array(511 downto 0) of std_logic_vector(11 downto 0);
signal buf : Tbuf;
--
signal ix : std_logic_vector(3 downto 0) := x"0"; --index inside block
signal isubmb : std_logic_vector(3 downto 0) := x"0";--index to blocks of luma
signal ichsubmb : std_logic_vector(2 downto 0) := b"000";--index to blocks of chroma
signal ichf : std_logic := '0'; --chroma flag
signal ichdc : std_logic := '0'; --dc chroma flag
signal imb : std_logic_vector(1 downto 0) := b"00"; --odd/even mb for chroma
signal ox : std_logic_vector(3 downto 0) := x"0"; --index inside block
signal osubmb : std_logic_vector(3 downto 0) := x"0";--index to blocks of luma
signal ochf : std_logic := '0'; --chroma flag
signal ochdc : std_logic := '0'; --dc chroma flag
signal omb : std_logic_vector(1 downto 0) := b"00"; --odd/even mb for chroma
signal nloadi : std_logic := '0'; --flag for nload (delay by 1)
signal nxinci : std_logic := '0'; --flag for nload (delay by 1)
signal nv0 : std_logic := '0'; --for NV(0)
signal nv1 : std_logic := '0'; --for NV(1)
signal nlvalid: std_logic := '0'; --left N is valid
signal ntvalid: std_logic := '0'; --top N is valid
signal ccinf : std_logic := '0'; --chroma in
--
begin
--
READYI <= '1' when omb=imb or (ochf='1' and isubmb < 12) or
(isubmb+1 < osubmb and isubmb < 12) else '0';
DONE <= '1' when omb=imb and isubmb=0 and osubmb=0 and READYO='1' else '0';
nv0 <= '1' when nlvalid='1' or (osubmb(2)='1' and ochf='0') or osubmb(0)='1' else '0';
nv1 <= '1' when ntvalid='1' or (osubmb(3)='1' and ochf='0') or osubmb(1)='1' else '0';
--
process(CLK)
variable addr : std_logic_vector(8 downto 0);
begin
if rising_edge(CLK) then
if NEWSLICE='1' then
ix <= x"0"; --reset
isubmb <= x"0";
ichsubmb <= b"000";
ichf <= '0';
ichdc <= '0';
imb <= b"00";
ox <= x"0";
osubmb <= x"0";
ochf <= '0';
ochdc <= '0';
omb <= b"00";
nloadi <= '0';
nlvalid <= '0';
ntvalid <= '0';
elsif NEWLINE='1' then
nlvalid <= '0';
ntvalid <= '1';
end if;
--
if VALIDI='1' and NEWSLICE='0' then
if ichf='0' then
addr := '0' & isubmb & ix;
elsif ichdc='0' then
addr := '1' & imb(0) & ichsubmb & ix;
else
addr := '1' & imb(0) & ichsubmb(2) & (not ix(1 downto 0)) & x"F";
end if;
assert not is_x(ZIN) report "Problems with ZIN" severity WARNING;
if ichf='0' or ix/=15 then
buf(conv_integer(addr)) <= ZIN;
end if;
if ichf='0' then --luma
ix <= ix + 1;
if ix=15 then
isubmb <= isubmb+1;
ichf <= not isubmb(0); --switch to chroma after even blocks
if isubmb=0 or isubmb=8 then
ichdc <= '1';
end if;
if isubmb=15 then
imb <= imb+1;
end if;
assert isubmb/=osubmb or ochf='1' or ox>ix or imb=omb report "xbuffer overflow?" severity ERROR;
end if;
elsif ichdc='1' then --chromadc
if ix=3 then
ix <= x"0";
ichdc <= '0';
else
ix <= ix + 1;
end if;
elsif ichdc='0' then
ix <= ix + 1;
if ix=15 then
ichsubmb <= ichsubmb + 1;
ichf <= '0';
end if;
end if;
end if;
if VALIDI='0' and NEWSLICE='0' then
assert ix=0 report "VALIDI has fallen when in middle of block" severity WARNING;
end if;
--
if NEWSLICE='0' and HVALID='0' and imb/=omb and ((TREADYO='1' and READYO='1') or ox/=0) then
--output
if ochf='0' then
addr := '0' & osubmb & ox;
elsif ochdc='1' then
addr := '1' & omb(0) & osubmb(2) & ox(1 downto 0) & x"F";
else
addr := '1' & omb(0) & osubmb(2 downto 0) & ox;
end if;
VOUT <= buf(conv_integer(addr));
assert not is_x(buf(conv_integer(addr))) report "Problems with VOUT" severity WARNING;
VALIDO <= '1';
if ochf='0' then
NX <= '0'&osubmb(2)&osubmb(0);
NY <= '0'&osubmb(3)&osubmb(1);
else
NX <= '1'&osubmb(2)&osubmb(0); --osubmb(2) is Cr/Cb flag
NY <= '1'&osubmb(2)&osubmb(1);
end if;
if ochf='0' then
ox <= ox+1;
if ox=15 then
osubmb <= osubmb+1;
if osubmb=15 then
ochf <= '1';
ochdc <= '1'; --DC chroma follows Luma
end if;
nloadi <= '1';
end if;
elsif ochdc='1' then
if ox/=3 then
ox <= ox+1;
else
ox <= x"0";
osubmb(2) <= not osubmb(2);
if osubmb(2)='1' then
ochdc <= '0'; --AC chroma follows both DC chroma
end if;
end if;
else
if ox/=14 then
ox <= ox+1;
else
ox <= x"0";
osubmb(2 downto 0) <= osubmb(2 downto 0)+1;
if osubmb(2 downto 0)=7 then
ochf <= '0';
omb <= omb+1;
nxinci <= '1';
end if;
nloadi <= '1';
end if;
end if;
else
VALIDO <= '0';
end if;
NLOAD <= nloadi;
NXINC <= nxinci;
NV <= nv1&nv0;
if nloadi='1' then
nloadi <= '0';
end if;
if nxinci='1' then
nxinci <= '0';
nlvalid <= '1';
end if;
--
ccinf <= ichf and VALIDI;
CCIN <= ccinf;
end if;
end process;
--
end hw; --h264buffer