Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
# BOM notes
- Line numbers 1 to 12 and 15 match the callouts in `media/exploded.png`, the numbered parts in `cad/src/concept_media.py` and the part keys in `cad/src/model.py` (`BOM_ORDER`). Lines 13 and 14 have no callout.
- All prices are indicative single-unit estimates in USD (September 2026) and have not been checked against quotes. Total: $264.00 (HGD-CAL-001, N1), $1 under the $265 `budget_usd` decided by Amish on 2026-09-25 (HGD-DDR-002; it was $180). Without the fan and make-up grille the kit is $206.
- Changes at TRL 3: the fan (line 9) is re-specified as a 450 m3/h mixed-flow fan (+$15) because a 300 m3/h axial fan cannot give the 300 m3/h boost against the duct losses; the arrestor discs (line 4) are 2 mm instead of 5 mm and the drip skirt becomes the bump test cup (+$1); the bump test port and tube (line 15, $9) are new; the controller board (line 6) now calls for 4 MB of flash and a series trip relay at no price change.
- Supplier types are given; no line is tied to a quote or a purchase. Purchasing is TRL 4 work and is not started.
- Not included: the hydrogen source, regulator, supply tubing, any flow restrictor and the gas fitting work. These belong to the gas system (for example H2Bench) and must be installed by a competent person. HGD-CAL-001 (B4) sizes the restrictor orifice.
- Not included: certified span gas for bump tests (1 % hydrogen in air), its cylinder regulator and the wall openings for the fan and grille.
- A certified hydrogen sensing element (for example a NevadaNano MPS sensor, listed at about $249) would replace lines 2 and 3 and raise the total to about $465; see the precis (D1 upgrade path).
d1e6b7da4This file is pinned to the selected release. Download the original to open it in your design tool.