Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
(200mm DIA CIRCLE USING ARCS)
(Offset so the *outer edge point* is at the end of the diagonal G0)
G90 (absolute positioning)
G21 (mm units)
G17 (XY plane)
G0 X50 Y50 (diagonal indent into + space: this is an OUTER EDGE point)
(From X50 Y50, circle center is at X120.7107 Y120.7107 => I=J=+70.7107)
G2 X191.4214 Y191.4214 I70.7107 J70.7107 (first 180 degrees)
G2 X50 Y50 I-70.7107 J-70.7107 (second 180 degrees, back to start)
4b4292b82This file is pinned to the selected release. Download the original to open it in your design tool.