Loading project Things
No Things found in this revision yet.
Browse this revision’s files →Convert gerber file (from Kicad) to a GCode file so as to be ploted by a 3D Printer
Loading README and project media…
/ | ___ _ __ | | ___ _ __ |__ \ / | / | ___ | | ___
| | _ / _ \ | '| | ' \ / _ \ | '| __) | | | _ | | / _ \ / ` | / _
| || | | __/ | | | |) | | / | | / / | || | | | | () | | (| | | /
__| _| || |./ _| |_| || _| _| _/ _,_| ___|
For converting Gerber files to GCode. Tested with Gerber file from Kicad
Gerber2Gcode test will execute the conversion on test.gbr and test.drl if exists and write test.gcode
file should be metric
test.gcode is ready to plot the pcb on a 3D printer with a pen adapter.
Assumed the pen write a 0.3mm line and a recovering of 0.14mm between 2 lines. Pen Up position is 4mm down 0mmm If one wants other preset, see PNGerber.hpp and change #define accordingly.
TODO: When plotting zone sometimes display "odd number of line ..." in such a case modify the recovering distance a little.
Jean Pierre