Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
/*
Multi
Iterate thru the output numbers from 1 to 28 of multiple ICs and both data pin states, repeatedly.
More details are available in the example "Default" and the definition of class FlipTheDot_FP2800a.
This example code is in the public domain.
modified 19 October 2016
by Robert Römer
*/
// uncomment these lines to get some debug informations via the defined Serial connection
/*
#ifndef FlipTheDot_FP2800aMulti_DEBUG_SERIAL
#define FlipTheDot_FP2800aMulti_DEBUG_SERIAL Serial
#endif
*/
// include the library
#include "FlipTheDot_FP2800aMulti.h"
// defining the Arduino pins which control the FP2800a ICs
const int fp2800a_pin_DATA = A0;
const int fp2800a_pin_ENABLE_1 = A1;
const int fp2800a_pin_ENABLE_2 = A2;
const int fp2800a_pin_ENABLE_3 = A3;
const int fp2800a_pin_ENABLE_4 = A4;
const int fp2800a_pin_ENABLE_5 = A5;
const int fp2800a_pin_A0 = 2; // D2
const int fp2800a_pin_A1 = 3; // D3
const int fp2800a_pin_A2 = 4; // D4
const int fp2800a_pin_B0 = 5; // D5
const int fp2800a_pin_B1 = 6; // D6
const int fp2800a_pulse_length = 100; // microseconds
// prepare the list of enable pins
int fp2800a_pin_ENABLE_list[] = {
fp2800a_pin_ENABLE_1,
fp2800a_pin_ENABLE_2,
fp2800a_pin_ENABLE_3,
fp2800a_pin_ENABLE_4,
fp2800a_pin_ENABLE_5
};
// setup the FP2800aMulti controller object
FlipTheDot_FP2800aMulti controller(
fp2800a_pin_ENABLE_list,
sizeof(fp2800a_pin_ENABLE_list) / sizeof(int), // list length/size (calculated or static value possible)
fp2800a_pin_DATA,
fp2800a_pin_A0,
fp2800a_pin_A1,
fp2800a_pin_A2,
fp2800a_pin_B0,
fp2800a_pin_B1,
fp2800a_pulse_length
);
// helper variables
int outputNo = 0;
boolean dataStatus = false;
void setup() {
// initialize debug Serial connection if defined
#ifdef FlipTheDot_FP2800aMulti_DEBUG_SERIAL
FlipTheDot_FP2800aMulti_DEBUG_SERIAL.begin(9600);
#endif
delay(1000);
controller.setData( !dataStatus );
}
void loop() {
if ( outputNo < 0 || outputNo >= controller.getOutputMax() )
{
// reset output number and invert the data flag
outputNo = 0;
dataStatus = !dataStatus;
controller.setData( dataStatus );
}
// increase output number
outputNo++;
// set new output number
controller.setOutput( outputNo );
// pulse the "enable" pin for the defined time to high and back to low
controller.pulse();
delay(500);
}
d0af6815eThis file is pinned to the selected release. Download the original to open it in your design tool.