FaderBuddy

; PlatformIO Project Configuration File

[env:lilygo-t-display]
platform = espressif32@6.12
board = esp32dev
framework = arduino

; Regenerate the embedded *current* FaderBuddy application image
; (include/fader_app_image.h) before every build, so the production test's
; I2C-bootloader firmware-install step always streams the up-to-date app.
; See tools/generate_app_image.py.
extra_scripts = pre:tools/pre_embed_app_image.py

lib_deps =
    madhephaestus/ESP32Servo @ 3.0.9
    adafruit/Adafruit INA3221 Library @ 1.0.1
    bodmer/TFT_eSPI @ 2.5.43
; build_src_filter = +<*> -<.git/> +<../../firmware/src/shared/>
build_flags =
    -I../../firmware/src/shared
    -DUSER_SETUP_LOADED=1
    -DST7789_DRIVER=1
    -DTFT_WIDTH=135
    -DTFT_HEIGHT=240
    -DTFT_MOSI=19
    -DTFT_SCLK=18
    -DTFT_CS=5
    -DTFT_DC=16
    -DTFT_RST=23
    -DTFT_BL=4
    -DLOAD_GLCD=1
    -DLOAD_FONT2=1
    -DLOAD_FONT4=1
    -DLOAD_FONT6=1
    -DLOAD_FONT7=1
    -DLOAD_FONT8=1
    -DLOAD_GFXFF=1
    -DSMOOTH_FONT=1
    -DSPI_FREQUENCY=40000000
board_build.filesystem = littlefs
board_build.partitions = default.csv
monitor_speed = 115200
upload_port = /dev/serial/by-id/usb-Silicon_Labs_CP2104_USB_to_UART_Bridge_Controller_02280A9E-if00-port0
build_src_filter = +<*> -<lab_main.cpp>

; Control-loop tuning harness - see src/lab_main.cpp. Replaces the production
; test state machine with a serial command interface for step-response capture.
[env:lab]
platform = espressif32@6.12
board = esp32dev
framework = arduino
lib_deps =
    madhephaestus/ESP32Servo @ 3.0.9
    adafruit/Adafruit INA3221 Library @ 1.0.1
build_flags =
    -I../../firmware/src/shared
build_src_filter = +<lab_main.cpp> +<fader_buddy_i2c.cpp>
monitor_speed = 921600
upload_port = /dev/serial/by-id/usb-Silicon_Labs_CP2104_USB_to_UART_Bridge_Controller_02280A9E-if00-port0