FaderBuddy

name: Export Electronics

on:
  push:
  pull_request:

jobs:
  export-electronics:
    name: Export Electronics
    runs-on: ubuntu-24.04

    steps:
      - name: Checkout code
        uses: actions/checkout@v3

      - name: Set up outputs directory
        run: mkdir -p electronics/build/outputs

      - name: Install dependencies
        run: ./ci/electronics/dependencies.sh



      - name: fader_buddy_main -- Gen JLCPCB fabrication files 
        run: |
          ./ci/electronics/export_jlcpcb.py --release-prefix releases/electronics/ --assembly-schematic electronics/fader_buddy_main.kicad_sch electronics/fader_buddy_main.kicad_pcb
          cp -r electronics/build/fader_buddy_main-jlc electronics/build/outputs

      - name: fader_buddy_main -- Gen PCB overview PDF
        run: |
          ./ci/electronics/generate_pdf.py --release-prefix releases/electronics/ electronics/fader_buddy_main.kicad_pcb
          cp electronics/build/fader_buddy_main-pcb-packet.pdf electronics/build/outputs
        env:
          PYTHONUNBUFFERED: 1

      - name: fader_buddy_main -- Panelize PCB
        run: |
          kikit panelize -p electronics/fader_buddy_main-kikit_panelize.json \
            electronics/fader_buddy_main.kicad_pcb \
            electronics/build/panelized_fader_buddy_main.kicad_pcb

      - name: fader_buddy_main -- Gen JLCPCB fabrication files (panelized)
        # DRC is already run for the single board above; the panel's frame/tabs
        # are generated geometry, so DRC is skipped here.
        run: |
          ./ci/electronics/export_jlcpcb.py --release-prefix releases/electronics/ --assembly-schematic electronics/fader_buddy_main.kicad_sch --no-drc electronics/build/panelized_fader_buddy_main.kicad_pcb
          cp -r electronics/build/panelized_fader_buddy_main-jlc electronics/build/outputs/fader_buddy_main-panelized-jlc

      - name: fader_buddy_main -- Gen schematic, iBOM, 3d (KiBot)
        uses: INTI-CMNB/KiBot@b139bf69c75ffffa941c6f5876af42f3f3efd501
        with:
          config: electronics/fader_buddy_main.kibot.yml
          dir: electronics/build/outputs
          schema: 'electronics/fader_buddy_main.kicad_sch'
          board: 'electronics/fader_buddy_main.kicad_pcb'

      - name: fader_buddy_main -- Gen 3d (KiBot, panelized)
        uses: INTI-CMNB/KiBot@b139bf69c75ffffa941c6f5876af42f3f3efd501
        with:
          config: electronics/fader_buddy_main-panelized.kibot.yml
          dir: electronics/build/outputs
          schema: 'electronics/fader_buddy_main.kicad_sch'
          board: 'electronics/build/panelized_fader_buddy_main.kicad_pcb'

      - name: fader_buddy_main -- KiBot fix permissions
        # Need to chown files back to runner, as ownership gets set to root by the KiBot Actions
        run: |
          sudo chown runner:docker electronics/build/outputs/*
          sudo chown runner:docker electronics/build/*

      - name: fader_buddy_main -- Rasterize schematic PDF
        run: |
          convert -density 96 electronics/build/outputs/fader_buddy_main-schematic.pdf \
            -background white -alpha remove \
            electronics/build/outputs/fader_buddy_main-schematic.png

      - name: fader_buddy_main -- Annotate images
        run: |
          ./ci/util/annotate_image.sh electronics/build/outputs/fader_buddy_main-3D_top.png
          ./ci/util/annotate_image.sh electronics/build/outputs/fader_buddy_main-3D_bottom.png
          ./ci/util/annotate_image.sh electronics/build/outputs/fader_buddy_main-3D_perspective.png
        env:
          PYTHONUNBUFFERED: 1

      - name: fader_buddy_main -- Annotate images (panelized)
        run: |
          mv electronics/build/outputs/panelized_fader_buddy_main-3D_top.png electronics/build/outputs/fader_buddy_main-panelized-3D_top.png
          ./ci/util/annotate_image.sh electronics/build/outputs/fader_buddy_main-panelized-3D_top.png
          mv electronics/build/outputs/panelized_fader_buddy_main-3D_bottom.png electronics/build/outputs/fader_buddy_main-panelized-3D_bottom.png
          ./ci/util/annotate_image.sh electronics/build/outputs/fader_buddy_main-panelized-3D_bottom.png
        env:
          PYTHONUNBUFFERED: 1






      - name: Show artifacts
        if: always()
        run: |
          ls -lah electronics/build
          ls -lah electronics/build/outputs

      - name: Archive artifacts
        uses: actions/upload-artifact@v4.6.0
        if: always()
        with:
          name: electronics
          path: |
            electronics/build

      - name: Configure AWS Credentials
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        uses: aws-actions/configure-aws-credentials@v1-node16
        with:
          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          aws-region: us-east-1

      - name: Sync artifacts to S3
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        run: |
          aws s3 sync electronics/build/outputs s3://motorfader-artifacts/${GITHUB_REF#refs/heads/}/electronics --delete --cache-control max-age=0,no-cache